SITC of 9 x 1.5 TR split AC hot and cold in standard room with associated works in Visitors Hostel at IIT Kanpur

Supply, Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners with Indoor Unit (IDU), Outdoor unit (ODU), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe or as provided by OEM, R-32/R-410/R- 407 Green refrigerant, wireless remote control with cells, sutiable for working between 180-260 V with low & high voltage cutoff and 50 Hz , 1 phase AC supply capable of performing cooling, dehumdification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of rated capacity upto 52°C . Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must Comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermietic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS: 1391Part ll 2023.

Inverter Type - Hot & Cold

1.5 TR with 3 star BEE rating

Providing & fixing of additional refrigerant copper piping (6.3 mm/15.88mm) or (6.3 mm/12.7 mm) suitable for suction & discharge line i/c additional refrigerant R-32 /R-410 A top-up as required with 6/9 mm XLPE/Nitrile insulation with PVC tape on surface /recessed with clamps, screws etc from indoor tooudtdoor units as standard specifications complete as required

Providing & fixing Unplasticized Polyvinyl Chloride (uPVC) pipes, having thermal stability for cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer In Charge. Internal Work - Exposed on Wall

Providing & fixing of suitable size and type ready made iron wall/floor mounting bracket stand duly painted for ODU w/o canopy

Providing & fixing of suitable size and type ready made iron wall/floor mounting bracket stand duly painted for ODU i/c canopy made 25 x 3 mm angle frame with fibre Aluminium sheet with VI pad, Nut-bolt, washers etc for outdoor unit complete as required.

Suplly, laying, testing and Commissioning of approved make FRLS PVC/ XLPE insulated Power / Control copper cable of on surface / recessed complete as required.

4 core x 2.5 sq mm

Providing & fixing of single phase plug top ISI marked for AC unit etc i/c dismantling old plug top if any complete as required.

3 pin - 16 Amp. (PVC)

3 pin - 16 Amp. (Metallic)

Providing, laying & fixing of rein forced fibre flexible / soft PVC pipe of size given below etc. complete as required

Up to 16 mm

Supply and fixing PVC/UPVC minin trunking (casing -caping) & flexible conduit of following size white - system with independent cover etc. as reqd.

Trunking 20 x 12 mm

Steel Flexible Conduit 20 mm

Supply & Installation of DLP trunking 105 x 50 mm without cover and partition /accessories etc.

Supply & fixing of following accessories suitable for 105 mm x 50 mm size plastic trunking white system

flexible cover 85 mm

Internal Angle

External Angle

End Cap