Sanitary and plumbing for chagne room at open stadium spituk

Amount

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: wash basin size 550x400mm with a pair of 15mm C.P brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception ,, of pipes and fittings.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing soap dish of C.P brass and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make , weight not less than 105 gms ( Prayag or equivalent)

Providing and fixing PVC pipe confirming to IS : 4985 ( class - iv ) with all injection moulded fitting viz : elbows , tees, etc jointed with solvent cement , cutting chase and making good the wall in all respect for waste connections : a) PVC 100 mm @ 6 kg / rm

b ) PVC 75mm @ 6 kg/rm

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: a ) 100 mm dia.

Providing and fixing 100mm sand PVC grating for gully, floor or nahani trap.

Providing and fixing P trap for English type w.c with washer and m.s claps complete job.

Providing and fixing double equal plain junction of required degree a ) 75 x 75 x 75 PVC as per

b ) 1 00x1 00x1 00 PVC as per

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropytene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes testing of joints complete as per direction of Engineer-in-charge. ( concealed work including cutting chases and making good the walls etc.) a ) 20 mm dia nominal bore .

b ) 32 mm dia nominal bore

Providing and fixing C.P brass bid cock of approved quality conforming to IS : 8931. 15mm nominal bore

Providing and fixing C.P brass long body bib cock of approved quality conforming to IS standard and weighting not less than 690 gms.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes butwithout fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. PVC storage tank.

Making connection of PPR distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 20 to 32 mm nominal bore.

Providing and fixing PVC ball valve with complete job 32mm dia

M/S SONAM TUNDUP CONSTRUCTION

M/S CHOSANG NAMGIAL