Construction of CFC Phase 1 leveling and boundary wall covering the area of 4 kanals at Hutt Pyt. Hutt Under P.R.I.Grants

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) in trenches for foundation, drains, pipes etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on Plan, including dressing of sides and ramming of bottoms, including getting out the excavated earth and disposal of surplus excavated earth as directed, including all leads and lift. a) All Kind of soil.

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/ HL)

Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) with 30% boulders (including all leads and lifts carriages of material by MT/ HL)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring ,shuttering, finishing and reinforcement. All work upto plinth level with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/ HL)

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand) (including all leads and lifts carriages of material by MT/ HL)

Centring and shuttering including strutting, propping etc.and removal of form work for : a) Foundation, footings, bases of columns etc. for mass concrete.

Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand:4 graded stone agg. 12.5mm nominal size and curing complete (including all leads and lifts carriages of material by MT/ HL)

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.a) Cold twisted bars.

Steel work welded in built up sections /framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In gratings frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. a) Made of G.I. wire of dia 4mm.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. a) Two or more coat on new steel work

15mm cement plaster on the rough side of single or half brick wall of mix. 1:4 (1 cement: 4 fine sand) (including all leads and lifts carriages of material by MT/ HL)

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Kathua crusher for an average lead of 130.00 Km. by M.T. b) Stone aggregate 40mm nominal size & above from Kathua crusher for an average lead of 130.00 Km. by M.T. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Kathua crusher for an average lead of 130.00 Km. by M.T. d) Bricks from Kathua for an av. lead of 130.00 km. by M.T.

MADHU KHAJURIA