REPAIR/MAINT OF PATH, HARDSTANDING, DRAIN AND FENCING WORK IN CHETAK COMPLEX AND OTM ACCN AREA/DEFENCE CIVILIAN AREA UNDER GE (AF) ADM AREA AT AF STN GWALIOR

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level, complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling,mass concrete etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in benching of surface channel as in drains and finishing the surface even and fair complete all as specified and directed by Engineer-in-Charge.

M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc (inner girth only measured) complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in coping, kersbs, mud stops rounded or chamfered in edges etc, finish even & fair complete all as specified and directed including necessary formwork as per site requirement

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in fencing posts, holdfasts including necessary formwork as per site requirement complete all as specified and directed

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in drain beds etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc complete all as specified and directed.

All as per Item No 11 here-in-before but except bricks in CM (1:4) Note: Old serviceable bricks obtained from Item No 1 shall be used.

M&L for rendering 15 mm thick on new brick work or concrete surface on wall in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.

M&L for preparation of new plaster on brick wall surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and directed

Cutting channels, grooves in cement concrete floor/wall and trimming surface, depth 15cm and width or girth not exceeding 30cm complete all as specified and directed.

Demolition and breaking of drain pipe (RCC/SGSW/AC) pipe of 200mm bore complete all as specified and directed.

M&L for providing RCC pipe of 200mm bore class NP2 laid and jointed complete with collars and all as specified and directed.

Taking down cement / lime plaster on brick or concrete surfaces etc including racking out joint, hacking for key screbbing down with water etc.complete all as specified.

M&L for rendering 10mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surface finished even & fair complete al as specified.

M & L for preparation of newly plastered surface of wall and and three coats of white wash complete all as specified and directed.

M&L for chequered tiles of approved design,colour & of ( size 300mmx300mmx25mm) set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles & includind 20 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed

S&F 50 mm thick Pre cast cement concrete jallies type B0 1:2:4 (12.5mm graded aggregate) set in cement mortar 1:4 including all mouldings, chamfers, weathering, throating etc including demolition of old jallies complete all as specified and directed.

Demolition of RCC work of any description and in any position etc complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) (Nominal mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in cover slab and the like complete all as specified and directed. Note: TMT bars as in reinforcement shall be measured and paid separtely.

M&L for precast RCC cover slabs, Factory made of cement concrete mix type B-1 1:2:4 (using 20mm mm graded stone aggregate) like for manhole/ drains etc including reinforcement complete all as specified and directed by Engineer-in-Charge.

M&L for Formwork to soffits of suspended slab such as floor slabs, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to bottom not specified complete all as specified and directed.

M&L for TMT bars 6 mm to 8 mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for TMT bars10 mm and above dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground surface complete all as specified and directed.

All as per sl item No. 29 here-in-before but embedded on natural ground.

Dismantling barbed wire any type and any size complete all as specified and directed

M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia of bolt etc, complete all as specified and directed

Supply only galvanised chain link fencing of size 50 x 50mm aperture and dia of wire 4.00mm any size or type as approved by Engr-in -charge etc, complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh 50 x50mm , size and any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provideed for complete all as specified and directed.

M&L for framed work as in door or gates of angle or other section Fe-410 W (Gde E-250) with gusset plates, rails braces etc complete drilled for fixing of covering sheet or other covering complete all as spd and directed. Note:- Covering sheet shall be measured and paid separately.

M&L for 0.5 mm thick plain PVC Sheet of density not less than 1360 kg/cum fixed in doors, Gate with coach screw and PVC washers (length and girth as fixed) etc complete all as specified and directed.

M&L for two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth complete all as specified and directed

M&L for one coat of synthetic enamelled paint over MS surface including preparation of old steel/iron surfaces exceeding 10cm width or girth complete all as specified and directed

M&L for two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth complete all as specified and directed

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block broomed and filled properly with sand etc complete all as specified and directed.

M&L for removing/cutting trees, vegetation, digging out roots from concrete or brick wall, filling holes on building (block of 4/6 qtrs) wall/roof/chhajja/water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed.

M&L for removing/cutting trees, vegetation, digging out roots from concrete or brick wall, filling holes on building (Single living billet/Mess/Office) wall/roof/chhajja/water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed.

M/S NIRMAL SINGH DHANJAL (BID ID -3241318)

GWALIOR TRADE LINK (BID ID -3241711)

Kumar Sales Corporation (BID ID -3241065)

JAY PRAKASH SHARMA (BID ID -3241489)

M/s Raaj Construction Co. (BID ID -3241984)

KISHAN CONSTRUCTION COMPANY (BID ID -3241720)

RADHA MADHAV CONSTRUCTIONS (BID ID -3241963)

m/s vikash Engineers (BID ID -3241253)

M/S Amit Traders (BID ID -3241749)

USHA TRADERS (BID ID -3241297)