Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.9 LAccepted-AOC D 91 BLOCK D AMITY GREEN HASEMAU LUCKNOW PIN 226028 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226028 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹14.2 L+₹1.3 L (10.3%)Rejected-Finance | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹14.9 L+₹2.0 L (15.6%)Rejected-Finance 0 0 MOH SITARGANJ PIPRI POST UKHLI KATRA SHAHJAHANPUR UTTAR PRADESH 242301 SHAHJAHANPUR SHAHJAHANPUR UTTAR PRADESH 242301 | SHAHJAHANPUR | UTTAR PRADESH | 242301 | L3 | Rejected-Finance Being not lowest |
Tender Value
₹19.5 L
EMD Value
₹39,000
Closing Date
2 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) BAMRAULI
HQ CWE (AF) BAMRAULI, PRAYAGRAJ-211012
SPECIAL REPAIR TO ROADS IN GRD COMPLEX AT KUNRAGHAT, GORAKHPUR
2023_MES_614908_1
87311/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
GORAKHPUR
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (AF) GORAKHPUR
₹39,000
Yes
24 Nov 2023
22 Aug 2023
4 Oct 2023
22 Aug 2023
2 Oct 2023
13 Sept 2023
22 Aug 2023 - 29 Aug 2023
Amount
Scarifiying of picking gravelled macadam or biutminous macadam surface in area exceeding not exceeding 400 Sqm, exceeding 50mm and not exceeding 100mm deep complete all as specified and as directed.
M&L for Water Bound Macadam (WBM) 75 mm thick (Compacted thickness) with coarse aggregate granite, trap, basalt of grading 3 (50 to 20mm size), spread, rolled and consolidated to required gradient and camber complete all as specified and directed.
M&L for preparing unsurfaced Water Bound Macadam (WBM) surfaces by brushing with wire brushes and removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying a priming / tack coat with paving bitumen VG-10 @ 10 Kg per 10 Sqm complete all as specified and as directed.
M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a tack coat with paving bitumen VG-10 @ 5 Kg per 10 Sqm complete all as specified and directed.
M&L for providing bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5% binder content by weight of total mix, using paving bitumen (VG -30), using hot mix plant and laid using mechanical paver, rolled and compacted to required camber and gradient complete. Note :- (i) Work shall be executed as per design mix by Govt approved lab (NABL)/Govt Engg College as approved by GE. (ii) Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the Government.
S&F in repair cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplense reflector of model No 972.0 fixed with and incl. MS stud of suitable size as per manufacturers instruction complete all as specified and directed.
S&F in repair solar cat eye aluminium alloy shell (100% water proofing design according to IP-65) of 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4V/0.3W one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with minimum 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.
S&F in repair metal tubular delineater made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 50 mm dia steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips and anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1 complete all as specified and directed.
S&F in repair solar delineater plate of size 1000mm x 47mm made out of polycarbonate and toughened aluminium alloy body, height 145mm daimeter 80mm, comprises of 4 super bright LEDs which give 360 degree viewing solar panel 2.5V, 120mm (approx) 1.25V rechargeable battery 01 No complete all as specified and directed.
M&L preparation of new bituminous surfaces by removing or cleaning of all dirt, scales, oil grease and foreign materials etc. complete as per the direction of Engineer-in-Charge and providing 2.5mm thick (minimum) hot thermoplastic paint (Retro reflective type) for road marking in white/yellow shade by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, gun, beads dispenser, propane tank and heaters, heaterdriven by skilled operator on road surfaces complete all as specified and as directed. Note:- (i) Road marking work shall be carried out in accordance with manufacture's instructions and as specified in particular specifications. (ii) Refer MORTH specification of Para 803.4.2.1 and 800.4.2.2 on bituminous surface/surfaces in white colour or yellow colour and super imposed with glass beads confirming to BS 6088 and MORTH specification Para 803.4.3.3
S&F in repair Traffic Mirror (Convex) 600mm dia, made out of ABS / Fibre / Plastic body fixed in position with mild steel post of 75mm dia 2.5m high and bracket for fixing of convex mirror, embeded in PCC 1:3:6 type C1 using 20mm graded stone aggregate block, including 6mm thick MS plade of size 150 x 150mm for anchoring including painting of exposed postion of post with two coat of synthetic enamel paint over a coat of red oxide primer e imported OUTDOOR Polycarbonate convex mirror of 60cm diameter with 130 degree plus actual viewing angle , equipped with adjusting swivel and mounting bracket for infinite adjustment, complete all as specified and as directed.
Manufacturing, supplying and fixing retroreflective regulatory sign board of size 900mm diameter, made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lense type retro-reflective sheeting conforming to type IV of ASTM-D 4956-01 as approved by Engineer-in-Charge, Letters, symbols, borders etc. will be as per IRC:67, with required colour scheme on the board and with high intensity grade A. The aluminium sheet to be rivetted to MS frame of angle iron iron of size 40x40x4mm. The board will be fixed to 1 No 50x50mm square post made of MS angle 50x50x4mm, 4m long welded to the frame with adequate anti theft arrangement. Sheet work to be painted with two or more coats synthetic enamel paint over and under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respect all as specified and directed.
S&F in repair stainless steel board, high intensity reflective sign board made of hardened ACP sheet 2mm thick POP rivitted to stainless steel rectangular pipe of size 50x25mm frame of size 900x1200mm. Frame supports with bolts over 60mm dia 3 mtr long stainless steel pipe of 16 guage with stainless steel bonded clamps. All stainless steel sheet parts should be polished, sign board should be reflective on one side with wide HIP sheet and overlay film of blue colour with computer cut letters sign and border all as specified and directed by Engineer-in-Charge. Two boards on single frame are fixed back to back to look as one for D/S boards including excavation, filling of PCC 1:3:6 type C-2 for fixing of pole as required height complete all as specified and directed.
Manufacturing, supplying and fixing in repair out living cast cast iron 3 seater garden bench for outdoor park / partio in rectangular shape and colour as approved by Engineer-in-Charge, size 1600mm x 610mm x 787mm, Model No OL-PARK-BENCH-6 or equivalent complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and any position not otherwise specifically provided for complete all as specified and directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
M&L for Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in sub base of floorscomplete all as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter ocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for preparation of plastered or concrete surface and applying two coat of synthetic enamel paint over a coat of cement primer complete all as specified and as directed.
M&L PCC 1:2:4 type B-1 (using 20mm graded aggregate) including necessary form work, as in coping and similar work complete all as specified and directed
M/S SHAILZA TRADERS
M/S GUPTA TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .