Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.1 L
EMD Value
₹15,000
Closing Date
29 Jan 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Minor Irrigation Department
EXECUTIVE ENGINEER
RESTORATION OF PUMP HOUSE WATER SUPPLY SCHEME
MI/2023-24/OW/WORK_INDENT774
MI/2023-24/OW/WORK_INDENT774
Open
Other Works
Electronic Documents, First(One Cover)
Minor Irrigation Division Mysore
6 documents required · 2 mandatory · 4 optional
₹500
₹15,000
19 Jan 2024
19 Jan 2024
19 Jan 2024
RESTORATION OF PUMP HOUSE WATER SUPPLY SCHEME IN SY NO 234, 206 AND 207 OF SOSALE GRAMA PANCHAYATH IN T NARASIPURA TALUK MYSURU DISCTRIC
PUMP HOUSE : Clearing and grubbing land including uprooting rank vegetable grass, bushes, shrubs, saplings and trees upto 300mm girth by manual means, in areas of light jungle, removal of stumps, disp...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than ...
Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Pressed steel door frames (mild steel sheet 1.60 mm) Profile "E etc. complete as directed by the Engineer in charge of the work.
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to ...
Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...
Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished wit...
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever requir...
REPAIRS TO PUMP AND MOTOR : Cleaning of borewells including yield testing of borewell either using slow or fast rigs for not more than 2 hours at the final depth with a minimum working of 2 hours cont...
Labour charges for lowering additional GI pipes of dia 32 / 50 mm dia including transportation charges (New GI pipe required will be supplied by the department free of cost & released GI pipes should ...
Replace the components of submersible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and tes...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
ELECTRIFICATION : RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 etc. complete as directed by the Engineer in charge of the work.
RCC Pole - 9 Mtr Long, 150 Kg WL Sq Section (Dwg No. BESCOM/GM/QS&S/51 Dtd 24.11.2018) as per IS-785 etc. complete as directed by the Engineer in charge of the work.
Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL(Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991 etc. complete as directed by the Engineer in charge of the work
11 kV, Horizontal Cross Arm - Mild Steel (MS) (Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018)etc. complete as directed by the Engineer in charge of the work
1.1 kV Polymeric Pin Insulaton etc. complete as directed by the Engineer in charge of the work
11 kV, 45 kN Polymeric Insulato etc. complete as directed by the Engineer in charge of the work
7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM etc. complete as directed by the Engineer in charge of the work
Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM etc. complete as directed by the Engineer in charge of the work
Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) etc. complete as directed by the Engineer in charge of the work
1.1 kV Polymeric Pin Insulator etc. complete as directed by the Engineer in charge of the work
11 kV, 45 kN Polymeric Insulator etc. complete as directed by the Engineer in charge of the work
LT Protection Kit (Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018) etc. complete as directed by the Engineer in charge of the work
Distribution Transformer - 3 Phase, 11kV/433V - Amorphous Core with Oil as per IS-1180 (Part-1): 2014 25 kVA, Aluminium Wdg, Star 2 (5 Star) etc. complete as directed by the Engineer in charge of the ...
11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) etc. complete as directed by the Engineer in charge of the work
LT 4 Pin Cross Arm - MS (Dwg No. BESCOM/GM/QS&S/32 Dtd 24.11.2018) etc. complete as directed by the Engineer in charge of the work
No. 8 Strain Insulator etc. complete as directed by the Engineer in charge of the work
Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM etc. complete as directed by the Engineer in charge of the work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
SOSALE BW 774.doc
Tender Document • 1.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .