COMPREHENSIVE MISC REPAIR WORK IN VARIOUS MES INSTALLATIONS AT AJMER AND NASIRABAD MIL STN UNDER GE NASIRABAD

Amount

Taking down cement or cement lime plaster on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for 15 mm rendering in CM 1:4 on fair face of wall or on stone masonary surfaces finished even with water profinfing compound (WPC) and smooth without using extra cement complete all as specified.(WPC Measured seprately) and including necessary formwork for rendering etc complete all as specified and directed.

Supply only liquid water proofing compound ( For external plaster surfaces) complete all as specified and directed.

M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished even and smooth ,without using extra cement, over and including dubbing coat (if required) complete all as specified and directed.

M & L for rendering in cement mortar (1:4) 5mm thick as in ceiling surfaces finished even and smooth without using extra cement, complete all as specified & directed.

M & L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 , over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed.

M & L for two coats of cement base paint over one coat of cement based primer on plastered surfaces of walls including preparation of new surfaces complete all as specified and directed.

M & L for complete removal of existing treatment and applying, two coats of cement base paint over one coat of cement based primer on wall old surfaces complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash on plastered surface complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of white wash on wall surface complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of white wash on ceiling surfaces complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.

M & L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed.

M & L for walling Random rubble masonary (but except stone) uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed.

M & L for providing cement concrete type C-1 (1:2:4) ung 20 mm graeded stone aggregate as in lintel upto 1.5m clear span. Cill,steps; seismic and other milar bands ,plinth coorses ,string courses,lacing cources ,parapets and railings upto 60 cm in height ,coapings , kneelers,apex stones bed plates ,water troughs and the like including s, incl weathering, slighting rounded or chamfered angles and throating all as directed. and specified.including form work complete all as specified and directed.

Demolition for (RCC jhali)ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed.

M & L for providing precast cement concrete louvres and jallies of type B0 1:2:4 (12.5MM GRADED AGGREGATE) set in cement mortar 1:4, of 40mm thick (measured solid), including all mould-ings but excluding frame (pre cast frame shall be measured separately and paid for under item 4032) complete all as specified and directed.

Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed.

M & L for 25 mm thick cement concrete, type B-0, 1:2:4 (Using 12.5mm crushed stone aggregate), finishing cement concerete surface even and smooth without using extra cement complete all as specified and directed.

M & L for 20-25 mm thick machine cut kota stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in cement mortar 1:4 ,rubbing , polishing complete inclu Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M & L for kota stone slab 20-25mm thick in riser of steps,skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete inlcuding 10 mm thick rendering in vertical surface of brick / PCC block wall in cement mortar 1:4 and including demolition of old kota stone dedo etc complete all as specified and directed.

M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/flooring etc. finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed.

M & L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement as specified and directed.

M & L for sand filling 25mm thick under floors or in foundations inc. watering and consolidation etc complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality complete all as specified and directed.

M & L for providing precast cement concrete 1:3:6 Type c1 using 20mm graded aggregate as in kerbs stone (100mm thick) or mud stops, rounded or chamfered on edges complete fixed in position & set in CM (1:4) incl necessary excavation required & removal of spoil to a distance exc 50 m etc complete all as specified and directed.

Taking down existing tar felt or of any description including cement plaster or concrete of any thickness from the roof surfaces of building including cleaning the surfaces in all respect & preparing it for further treatment & removing rubbish from site complete all as specified and directed.

Material and labour for 40mm thick (avergae consolidated thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

M & L for rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on fair faces of RCC/stone patti roof surfaces finished even & smooth without using extra cement complete all as specified and directed. Note:-WPC will be measured and paid separately.

M & L for roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 mircron high molecular high density polyethylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 2.60 kg/ Sqm applied with bonding material using blown type bitumen primer Grade 85/25 @ 1.20 Kg/Sqm over bitumen primer conforming to IS -3384 @ 0.40 Kg /Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg /Sqm over APP membrane with all overlaps complete all as specified and directed.

Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to stores and removing debris outside the MD land etc complete all as specified and directed.

S & F for ceramic Coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 etc complete all as specified and directed.

S & F for Glazed ceramic coloured tiles 350 x 250 x 7mm /450 x 350 x 7mm thick, in vertical surfaces and such as skirting, dados and riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding 10mm thick screed bed in CM 1:4 etc complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc 1.50sqm not exc4.00 Sqm each and complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each and complete all as specified and directed.

S & F for Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts etc. complete all as specified. The rates include for one shop coat of priming and filling PCC 1:3:6 etc complete all as specified and directed.

S & F for 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillet after S & F for false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm,complete all as specified and as directed.

Taking down old u/s steel window / ventilator and S & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

S & F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples all as specified and directed.

S & F for 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed.

S & F for MS butt hinges, medium weight, cold rolled, ISI marked of size 100mm, complete all as specified and directed.

S & F for 150mm long aluminium anodised barrel tower bolts of extruded section all as specified and directed.

S & F for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F for 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy all as specified and directed.

S & F in repairs 150 mm long door stopper of alumunium alloy body door stopper fixing on door, complete all as specified.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as specified and directed.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors,windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paidfor separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, rolling channel with bearing etc. all complete as specified and directed.

S & F for steel rolling shutters,thickness of laths is 1.25mm,without ball bearing,as specified including top cover,anchoring rod,hasp and staple and one shop coat of primer,erected in position as indicated,complete push pull or manual type complete all as specified and directed.

S & F for safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S & F for Ball bearing for rollings shutters complete all as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed.

S & F for Pre- painted galvaiume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping crews as specified complete all as specified and directed.

Dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and directed.

S & F for rolled section as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guisides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-0 or Fe310-0 etc complete all as specified and directed.

Framed work as in doors or gates of angle, hollow or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc complete all as specified and directed.

M & L for applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation complete all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Demolition of cement concrete (unreinforced ) in floors and pavings exc 15cm thickness (above or below GL) complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded aggregates) in foundation filling and mass concrete concrete and packing of angle iron fencing posts etc complete all as specified and directed.

M & L for cement concrete type C-2, 1:3:6,(40 mm graded aggregates) in walls or retaining walls, any thickness, size or sgaoe including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Supply only chain link MS galvanized fencing size or type etc complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh size and type of standard rails complete all as specified and as directed.

S & F for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed., drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S & F for mild steel lewis bolt screwed one end with hexagonal or square nuts & washers the other end enlarged & jagged or lewised exc 15cm and n exc exc 22.5 long dia of neck 11 to 15mm complete all as specified and as directed.

S & F for Mild steel in flat, round or square bars, in available lengths, Fe 290 (Gde E-165) complete all as specified and as directed.

S & F for Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) etc complete all as specified and directed.

Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories)

S & F for 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm complete all as specified and directed.

S & F for 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S & F for 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

Dismantling of existing water tanks capacity n exc 500 ltr and removing to store complete all as specified and directed.

S & F for rotational moulded polethylene water tank of 500 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I , including ball valves 20mm high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed ( min wt.15mm-142gms/20mm-210gms,25mm-455gms,40mm-690 gms ) complete all as specified and directed.

S & F for in repair 15 mm dia bib tap,fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S & F for in repair 15mm bore pillar tap cast copper alloy fancy type with capston heads, chromium plated screwed down high pressure, with or without letters Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipes and fixed etc complete all as specified and directed.

S & F for in repair 15mm bore stop valves ,fancy type,with long shankand cup(concealed type) ,screwed down,high pressure, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S & F for in repair PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts etc complete all as specified and directed.

S & F for in repair vitreous china squatting pan ORISSA pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

S & F for in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe etc complete all as specified and directed.

Supply and fix in repair 10 ltrs PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

GOMA CONTRUCTION COMPANY (BID ID -3246247)

ANAM BUILDCON (BID ID -3246583)

TANISHQ ENTERPRISES (BID ID -3251681)

VIPRABANDHU CONSTRUCTIONS (BID ID -3245841)

V K LAKWAL CONSTRUCTION (BID ID -3246773)