REPAIR AND RENOVATION OF LEARNING CENTRE AT GOVT HIGHER SECONDARY SCHOOL BHALWAL ZONE BHALWAL DISTT JAMMU

Amount

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm )

Making of cupboard with 19mm thick board including fixtures handles etc complete job

Providing and fixing 12mm thick glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing portable plastic folding metal leg step stool

Making fine arts numbers, alphabets, pictures,rymes etc complete job

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Painting top of roof with bitumen of app. Quantity of 17kg/sqm in pragnated with a coat of coarse sand at 16 Cum/10sqm including cleaning the slab surface with brushes and finally with a piece of cloth tightly soaked in kerosine oil complte with a reausidual type of petroleum bit. of penetration 80/100

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhura at 35 kg per Cum of earth and gobri leaping with mixed 1:1 (1 clay: 1 cowdung ) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand ) mixed with 2% of integral water proofing compound by wt of cement and finishing neat with F.P.S Brick Tiles (INCLUDING ALL LEAD LIFT AND CARRIAGES)

Providing gola 75*75mm in cement concrete 1:2:4(1 cement 2 coarse sand 4 stone agg. 10mm and down gauge including finishing with cement mortor 1:3(1 cement3 fine sand) as per standard design in 75*75 mm deep chase

Making khurras 45*45cm with average minimum thickness of 5 cm cemnt concrete 1:2:4(1 cement 2 coarse sand 4 graded stone agg. Of 20mm nominal size) over pvc sheet 1m*1m*400 micron finished with 12mm cement plaster 1:3 (1 cement 3 coarse sand) and a coat of neat cement rounded the edges and making and finishing the outlet complete

Sat Paul

Ravi Kumar

Sh. Bardri Nath Khajuria