Loading…
Loading…
Tender Value
₹17.8 Cr
EMD Value
₹27.8 L
Closing Date
10 Jul 2026, 10:30 am7d left
Executive Engineer
HPPWD Division Nadaun
Substructure, Superstructure and approaches
2026_PWD_137906_1
C/O 215.02 mtr. span double Lane Bridge over Kunah Khad connecting G. P. Jole Sappar G.P. Sanahi a
Open Tender
Civil Works - Bridges
365 days
Nadaun
Please refer Tender documents.
18 documents required · 18 mandatory
₹20,000
EE Nadaun
₹27.8 L
2 Jul 2026
2 Jul 2026
10 Jul 2026
2 Jul 2026
10 Jul 2026
2 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Earth work in excavation for foundation of bridge structures like abutment in all type of classification of soil comprising ordinary rock, hard rock, chiseling/wedging out of rocks (where blasting in prohibited) as per drawing and MORTH technical specifications and as per direction of the Engineer-In-Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious material and disposal upto all leads and lifts including dressing of side bottom and pumping, bailing out water (surface and sub-soil water) upto all depth any quantum of water including cleaning of slush which may arise out during dewatering including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. | |||||
| 1.01 | Abutments:- Depth upto 3.00 metre (Three metre) Ordinary Soil | - | Per Cubic metre.. | 78 | - |
| 1.02 | Depth upto 3.00 to 6.00 metre (Three to six metre) Ordinary Rock | - | Per Cubic metre.. | 734.1 | - |
| 2 | Providing and laying mechanically mixed and vibrated plain cement concrete nominal mix 1:3:6 (One cement : three sand : six graded crushed stone aggregate) 20mm (twenty millimetres) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths including cost of form work for plain concrete in abutments foundation for all type of structures complete as per drawing and technical specification clause 1500,1700 &2100 as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. | - | Per cubic metre | 5,441.2 | - |
| 3 | Providing and laying plain/reinforced cement concrete in sub-structure of bridge complete as per drawing and MORTH technical specification clause 1500,1700 & 2100 design mix to obtain minimum compresive strength of Grade M-30 (M-Thirty) with minimum cement content @ 420 kg/cum(at the rate four hundred twenty kilogramme per cubic metre) using concrete mixer as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. | 1 | Per cubic metre | 7,875.8 | ₹7,867.92 |
| 4 | Providing and laying plain/reinforced cement concrete in foundation of bridge complete as per drawing and MORTH technical specification clause 1500,1700 & 2100 design mix to obtain minimum compresiv strength of Grade M-35 (M-Thirty Five) with minimum cement content @ 450 kg/cum(at the rate four hundred fifty kilogramme per cubic metre) using concrete mixer as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 1 | Per cubic metre | 7,661.2 | ₹7,653.54 |
| 5 | Providing and laying plain/reinforced cement concrete in sub-structure of Pier (Height above 10m) complete as per drawing and MORTH technical specification design mix to obtain minimum compresive strength of Grade M-35 (M-Thirty Five) with minimum cement content @ 450 kg/cum(at the rate four hundred fifty kilogramme per cubic metre) using concrete mixer as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. | - | Per cubic metre | 8,228.7 | - |
| 6 | Providing and laying plain/reinforced cement concrete in sub-structure of bridge, Pier cap, Capping beam, dirt wall, pedestal & Reaction block complete as per drawing and MORTH technical specification clause 1500,1700 & 2200 design mix to obtain minimum compresiv strength of Grade M-35 (M-Thirty Five) with minimum cement content @ 450 kg/cum(at the rate four hundred fifty kilogramme per cubic metre) using concrete mixer as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | - | Per cubic metre | 7,973.4 | - |
| 7 | Supplying fitting and placing HYSD bar reinforcement made of TATA, TISCON/SAIL in foundation and sub-structure of Pier cap, Capping beam, dirt wall, pedestal & Reaction block in all heights including cost of binding wire and cost for cutting binding, bending and placing in position of bars complete as per drawing and MORTH technical specifications clause 1600 & 2200 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. | - | Per Tonne | 95,586.3 | - |
| 8 | Providing and laying of filter media with granular material/stone crushed aggregate satisfying the requirements laid down in of MORTH specifications clause 2504.2.2 to a thickness of not less than 600mm ( six hundred milimetre ) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specifications as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government. | - | Per cubic metre | 1,150 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.62 MB
Tendernotice_2.pdf
PDF • 0.52 MB
Tendernotice_3.pdf
PDF • 0.50 MB
SBDn.pdf
Tender Documents • 5.33 MB
BOQ_204230.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid