ADEN/N/SA Sub Division: (1) Maintenance of water supply system at TPT, SLY, MAP & BQI Stations & Colony for a period of Two years. (2) Providing House Keeping & Hospitality services for Track machine rest house at TPT, SLY, MAP & BQI for a period of Two years. (3) Maintenance of Sewer system at TPT, SLY, MAP & BQI for a period of Two years. (4) Annual maintenance works of dewatering, desilting, clearing water courses and removal of bushes/debris, etc in subways located in ADEN/N/SA Subdivision for the period of Two years.(Total=11 subways)

Cement. (SW.I- Maintenance of water supply system at TPT, SLY, MAP & BQI Stations & Colony for a

period of Two years. )

Item- 1 Please see the item Breakup

S No. Item No Description of Item Unit Qty Rate Amount

15.0 DISMANTLING AND DEMOLISHING

15.1S General

Dismantling G.I. pipes (external work) including

excavation and refilling trenches after taking out

15.44 the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead

as per direction of Engineer-in-charge :

17.0 SANITARY INSTALLATIONS

17.1S General

Providing and fixing water closet squatting pan

(Indian type W.C. pan ) with 100 mm sand cast

Iron P or S trap, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with

manually controlled device (handle lever)

conforming to IS : 7231,with all fittings and

fixtures complete, including cutting and making

good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 25 6767.4 169185

size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal

type water closet (European type W.C. pan) with

seat and lid, 10 litre low level white P.V.C. flushing

cistern, including flush pipe, with manually

controlled device (handle lever), conforming to IS :

7231, with all fittings and fixtures complete,

including cutting and making good the walls and

floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat Each 15 6515.55 97733.25

17.7B Providing and fixing wash basin with C.I. brackets, Each 25 1550.6 38765

15 mm PTMT pillar cock, 32 mm PTMT waste

coupling of standard pattern, including painting of

4 fittings and brackets, cutting and making good the

walls wherever required. White Vitreous China Flat

back wash basin size 550x400 mm with single 15

mm PTMT pillar cock.

Providing and fixing Stainless Steel A ISI 304

(18/8) kitchen sink as per IS:13983 with C.I.

17.10 brackets and stainless steel plug 40 mm, including

painting of fittings and brackets, cutting and

making good the walls wherever required :

17.10.2 Kitchen sink without drain board

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

SALEM DIVISION-ENGINEERING/SOUTHERN RLY

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot &

cold water supply, and all CPVC plain & brass

threaded fittings, including fixing the pipe with

18.7 clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per

direction of Engineer in Charge. ( Internal work -

Exposed on wall )

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass

threaded fittings and fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes

18.8 & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the

same including testing of joints complete as per

direction of Engineer in Charge. Concealed work,

including cutting chases and making good the

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot &

cold water supply including all CPVC plain & brass

18.9 threaded fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement,

trenching, refilling & testing of joints complete as

per direction of Engineer in Charge. External work

Providing and fixing G.I. pipes complete with G.I.

18.12 fittings including trenching and refilling etc.

18.15S BRASS FITTINGS

Providing and fixing brass bib cock of approved

Providing and fixing gun metal gate valve with C.I.

wheel of approved quality (screwed end) :

Providing and fixing ball valve (brass) of approved

18.18 quality, High or low pressure, with plastic floats

18.31S C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES

SALEM DIVISION-ENGINEERING/SOUTHERN RLY

18.48 Providing and placing on terrace (at all floor Per 30000 11 330000

levels) polyethylene water storage tank, IS : Litre

12701 marked, with cover and suitable locking

arrangement and making necessary holes for

inlet, outlet and overflow pipes but without fittings

and the base support for tank.

18.54S PTMT FITTINGS

Providing and fixing PTMT bib cock of approved

quality and colour.

18.54.1 15 mm nominal bore, 86 mm long, weighing not Each 150 125.6 18840

less than 88 gms

Providing and fixing PTMT stop cock of approved

quality and colour.

18.55.1 15 mm nominal bore, 86 mm long, weighing not Each 150 118.5 17775

less than 88 gms

Providing and fixing PTMT pillar cock of approved

quality and colour.

18.56.1 15 mm nominal bore, 107 mm long, weighing not Each 50 208.45 10422.5

less than 110 gms