REPAIR TO JOINERY TILING AND OTHER MICS ITEMS AT TATRA AND CERTAIN UNITS UNDER GE ARMY JAISALMER

Amount

Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each without taking off shutters from the frames.

-do- all as per item No.1 but not exceeding 1.5 sqm.

Taking down shutter of any description exc 1 sqm but not exc 2 sqm each.

S&F PVC door frame of size 50mm x 47mm made out of 5 mm plain PVC sheet reinforced with MS tube supplying and fixing only.

Supply & fix factory made solid PVC door shutter of 30mm thick(style) wit 2,4 or 6 raised panel design wioth 2mm thick PVC moulded sheet on the front face and 2mm plain colour PVC sheet on back face suppied and fitted complete.

Taking down internal cement plaster incl racking out joints hacking for key scrubbing down with water etc.

S & F Pressed steel frames size 125x60mm for doors ith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified and directed by Engr-in-Charge

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as directed and specified by Engineer-in-Charge

S&F partly pannelled and glazed or gauged shutters 35mm thick 2nd class HW, divided into squares with plain, chamfered or rounded, mitred and ribated with sash bars any numbers, provided with stiles and rails, sizes at members of shutters as specified in SSR Part I, Sec 8, clause 8.20(a).

S&F butt hinges 100mm long stainless steel.

S&F aluminium tower bolt 200 mm long of anodised section.

S&F Anodised aluminium alloy handles cast type, each 150mm long

S&F aluminium tower bolt 150 mm long of anodised section.

S&F Anodised aluminium alloy handles cast type, each 100mm long

S&F aluminium alloy anodized sliding door bolt 300mm long with hasp and staple fixing clips etc complete.

Hacking out old broken glass (any thickness/size/quality or description) from wooden frame glazed with putty or fixed with beads.

S&F sheet glass 3mm thick ordinary quality and glazing in squares not exc 050 sqm in each panes incl beading

S&F pin headed type and glazing in square n exc 0.5 sqm in each pane of 4mm thick

S&F Stainless Steel wire mesh, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staple wires complete.

S&F in repair Stainless Steel wire mesh, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staple wires complete in repairs.

S & F in repair PVC flushing cistern syphonic action type flushing cistern 10 ltr capacity low level coloured/white with inlet ball valve , float and handle including bracket / flush pipe of 32 mm dia PVC complete and connect to out let complete all as specified and directed.

S&F PVC connection with socket on both side 45cm to 60cm for 15mm dia pipe.

S&F in repair viterous china IWC squatting pan " Orissa pattern" size 580 x 440 mm white with itegral foot rest incl 'P' or 'S' Trap ( Excluding flushing cistern) and connecting to out let andf flush pipe complete all as specified and directed.

M&L for PVC (SWR ) floor trap 125/110mm and jointing with solvent cement and fixed in position complete all as specified and directed incl concrete type B1(1:2:4) complete in repairs (with wpc note: wpc will be measured and paid seperately)

M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer.

M&L preparing old painted wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint.

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded

S & F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe290-Gde-E-165

M&L for preparation of new untreated steel surface of any description exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer.

M&L preparation of old painted steel surfaces of any description over 10cm width or girth, not other wise described and applying one coat of synthetic enamel pant.

Material and labour for 15 mm thick rendering on fair face on stone masonry surfaces to finished even and smooth without using extra cement in cement mortar 1 : 6 and as specified and as directed.

Material and labour for 5 mm thick rendering plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement in any height of building complete all as specified and as directed.

Material and labour for cement plaster in CM 1:4, 20mm thick in two coats (15+5) with using integral water proofing compound and finished even and smooth without using extra cement including necessary scafolding of bldgs completed all as specified and as directed and removing the debris from the site, complete all as specified and directed by Eng-in-charge.

M&L preparing newly plastered surfaces and applying three coats of white wash but on ceiling of new surfaces.

M&L preparing newly plastered surfaces and applying three coats of white wash but on walls of new surfaces.

M&L for preparing new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for Preparing new plastered surface of wall preparotary to distempering and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete .

Complete removal of existing treatment on old wall surface, washing down with water and applying two coats of oil bound distemper over a coat of chalk whiting on wall complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortor bedding and removing serviceable tiles and rubbish off the premises etc all as specified.

M&L for non-skid coloured ceramic tiles 300x300x7mm thick / 400 x400x7mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed or bedding layer 15mm thick in cm 1:6 for laying floor finishes all as specified.

-ditto all as per item No-45 above but 450 x 300 x7mm or 350 x 250 x 7mm as in vertical surface of wall complete all as specified and directed including 10mm thick backing coat in CM 1:4

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar

M&L for coloured Granite (of any type ) tiles 20mm thick machine cut , bedded and jointed with grey cement slurry or counter and vertical support for WHB and pointed with grey cement with admixture of pigment to match the shade of tiles complete all as specified and directed

S&F in repair Counter fixed oval type viterous china wash basin, white flat back, size 550x400mm excluding taps, waste chain and plug but including bracket ( Cera, Hindware)

S&F waste coupling of 32 mm dia bore of discharge pipe

S&F High density polyethylene pipes(HDPE) of pressure rating 6 kgf/cm2 of 38/40mm bore fixed complete to walls,ceilings or in floors etc.

S&F tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified & directed by Engineer-in-charge. (Make :- Hindware Cat Part No.-F880005, Cera Cat Part No F5003103, Prayag -BA 20).

S&F looking mirror 8mm thk incl 6mm thick beading of plywood with decorative teak wood beading incl polishing of beading framing alround appx size 800mm x 1200mm all as specified and directed by Engr- In-Charge.

Taking up 100mm cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead

Taking up 80mm cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead

S&F 100 mm Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, in any length, laid in trenches

S&F 80mm Cast iron pipes with spigot and socket ends centrifugally cast, Class LA, in any length, laid in trenches

S&F Bends (any type, radius an angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, `Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150mm bore all as specified and directed by Engr -In - charge.

S&F in repair MS powder coated drapery rod 25mm dia decorative manner all as per sample and all as specified and directed by Engineer-in-charge.

M & L aluminium anodised decorative suitable brackets for curtain rails 20 to 25 mm dia complete all as specified & directed.

S&F in repair rotational moulded polyethylene water storage tank 500 Ltr capacity double layered ISI marked of cylindrical/ cubical vertical/horizontal shape with closed top cover of casted iron complete hoisted and fixed in position including including dismantling of existing water tanks of any capacity & taking credit complete all as specified and directed. (Note: Unserviceable water tanks of any description shall be credited vide sch.of credit)

Supply only integral water proofing compound.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.

M &L Squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6

M & L for Keyed pointing to rubble masonry uncoursed or brought up to courses in cement mortar 1:4.

Taking down Old unserviceable GI pipe at in any position for repairs and taking credit all as directed for 15mm bore size pipes/fitings etc :-

All as per item No 66 above but 20mm bore

All as per item No 66 above but 25mm bore

Supply and fix GI pipes medium grade 15mm bore with all fittings / GI bends complete in trenches all as specified and directed

All as per item No 69 above but 20mm bore

All as per item No 69 above but 25mm bore

Supply and fix in repairs Gun metal globe or gate valve 15 mm bore with iron wheel head screwed both end for iron pipe and fixed all as directed

All as per item No 72 above but 20mm bore

All as per item No 72 above but 25 mm bore

S & F stop valve of cast copper alloy screwed down high pressure with crutch of butterfly handle screwed down both ends for iron pipe suitable for 15 mm dia pipe and confirming to IS-781-1977.

S & F Bib tap, 15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. (make: Hindware Cat part no F330041, Prayag Cat part No 8306, Cera Cat part No F3001151).

S&F in repair Swivel shower rose round 85mm size with arm bend of 45 degree with flange of PTMT any colour complete all as specified & directed by Engineer-in-charge. (Make :- Prayag Cat Part No-BS-38,Cera Cat Part No-F7020102, Silver shine model No- 935).

S&F in pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed by Engineer-in-charge. (Make :- Prayag Cat Part No.- 8304, Cera Cat Part No. -F 2006101, Hindware Cat Part No. -F 20001 CP.)

S&F PVC Connection 15 mm bore with PTMT nuts of lengh 450mm.

Supply and Fix 15 mm bore Angle stop valve cast copper alloy fancy type chromium plated screwed down high presure with crutch or butterfly handle, screwed both ends for iron pipes/unions complete including dismantling/ taking out old, unserviceable item all as specified & directed. (Make: Prayag Cat part no 8310, Cera cat part no F2006202, Silver shine model no 1010, Hindware Cat part no F330043).

M&L for Machine cut kota stone flooring 20-25mm thick over cement screed bed laid and jointed in neat cement slurry mixed with pigment to match the shade of tiles as in window cill and sides etc including rubbing and polishing complete all as specified and directed

M/S SHRI HARI CONSTRUCTION COMPANY

M/s Shri Inder Construction Company

BHAGWATI CONSTRUCTION

Leelashah Enterprises