15th Finance 2024-2025 Million Plus Cities Chalenge Fund For SWM

Amount

Earthwork excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram,ordinary earth, with initial lead and lifts etc., for foundation SS 20 B Grade beam Shed coloumn

Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm ISS metal including cost conveyance of all materials and all labour charges etc Grade beam Platform flooring Shed coloumn Ramp

Supply, collection and filling of Gravel from approved quarry including all cost and conveyance to site, stacking them on road side to departmental gauge for the take premeasurement. Each layer not more than 15cm thick and consolidation properly etc complete. TNDSS No : 301 & 305 Plat form Flooring

Plain Cement Concrete 1:2:4 Mix (One part of cement, two part of sand and four part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with standard. specifications.. TNDSS NO: 24 Ramp Plat form Flooring

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - Shed column Footing GB

Brickwork in CM 1:5 (One Cement, Five Sand) using best quality of country bricks of size 8 3/4 "X 4 1/4" X 2 3/4" for sub structures including cost and conveyance and Labour Charges etc., Complete as per the standard specifications Wall around D/d coloumn D/d Window D/d open

Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spaced at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. TNDSS NO: 30&86 Shed coloumn

Grade beam

Supplying fabricating and placing in position of steel rods using TMT or Ribbed Tor Steel including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with standard. specifications. TNDSS NO: 86

Plastering in Cement Mortor 1:5 Mix (one Cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with standard specifications. TNDSS No: 56, 57 Wall around D/d coloumn D/d Window D/d open

Supplying and fixing of push and pull type Rolling shutter confirming to IS 6248/1979 and as amended from time to time. With ISI make of approved size and section using 18 gauge G.I.sheet.The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of Hood covers , transportation charges etc., and as directed by Engineer incharge.

Supply, fabricating & fixing in position of M.S window outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications. Window

Painting new plastered surface with two coats of ready mixed Exterior emulsion paint water based primer ( Liquid ) two coat over one coat of primer with best weather proof exterior emulsion paint approved color quality including preparation of surface and finishing neatly etc., complete complying with standard spefication and as directed by the departmental officers (S.L. No 59 A) Wall around D/d coloumn D/d Window D/d open

Supplying and fixing of M.S. " L "ANGLES of approved design fortruss using necessary mild steel flats for inner and outermembers which should be fixed to "truss" inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supply, and fixing of Galvalum sheet ( pre painted )6mm thick including 15 cm lapping necessary 'J' bolt and nut ,bitumen washer and screws if wooden baterns including cost and conveyance of all materials and labour charges etc complete complying with standard specifications

S.KARTHICK (BID ID -1504074)