Beautification of Various Chowk and Fixing Digital Boards at Various Location in Thane Municipal Corporation Area.

Amount

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Excavation for foundation of structure as per drawing and technical specifications including setting out, construction of shoring , brushing, removal of stumps and other deleterious matter, dressing of side and bottom and back filling with approved material etc. complete. (in marshy soil by mechanical means)

Providing dry trap rubble stone soling 80 mm thick including hand packing & compaction etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

P/C insitu cement concrete M20 of trap metal for foundation blocks & such other items including bailing out water manually, formwork, compaction, roughening them if special finish is to be provided and curing (Excluding finishing) etc. complete.

P/L insitu cement concrete M30 of trap metal for R.C.C. slabs of all thickness as per drawing including centering, formwork, compaction & roughening the surface if special finish is to be provided and curing etc. complete.

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and fixing in position steel fibre reinforced concrete (S.F.R.C.) frame and covers of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineerin-charge (20 tonnes capacity). d) 90 x 60 cm size

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Providing & fixing kerb stones 30 cm to 40 cm long, 15cm wide, 38cm deep medium dressed in all exposed surfaces, set in cement mortar 1:2 on a 15cm thick & 25cm wide M-100 (1:3:6) C. C. bed including filling the joints with 1:2 C. M. pointing, curing etc. complete.(in M-25 grade)

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Providing and fixing of 1200 mm high Glass Fibre Reinforced Composite railing for footpath made of 80x80x8mm inverted profiles for fencing column, 50x50x6mm profiles slottedas horizontal members, 25x15mm rod for verticle members, SMC moulded square ring and cap including cover ring for 50x50mm tube. The column shall be fixed on M.S. base plate...etc Complete

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. ( Item used only when Quantity is below 10 Cu.m.)

Excavation for roadway in Soft Rock including dressing Section to the required grade Camber & Side slopes & Conveying the Excavated materials with all Lift & Lead upto 50 m & Spreading for embankment or stacking. disposing as directed etc complete.

Milling of existing bituminous surface to specified depth of bituminous layer including disposal of removed material with all lift and lead upto 1000 m etc complete. Using machine like Writgen (W100) or equivalent

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Transportation of excavated material including loading and unloading etc. complete. lead upto 5km

c)lead upto 7km

d) lead upto 10 km.

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing and laying wedge shear elemental layer (WSEL) by using rubble stone of size 15 to 20 cm thick in single layer of 230 mm including packing the same with 20 mm to 40 mm thick aggregates ( normal size) and using stone powder of 40 mm to 50 mm thick on surface and watering & compacting by vibratory roller confirming layer thickness of minimum 200 mm and as directed by Engineer - in - charge etc complete.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate)

Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone layers metal 100% crusher broken metal with conical crusher palnt, heating and spraying the bitumen of specified grade @ 1.75 kg / sqm, spreading 12mm.size chips compacting with Static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat at the rate of 0.30 Kg Sqm.on existing bitumen surface. (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and applying tack coat with bitumen emulsion (RS1) using emulsion pressure distributer at the rate of 0.20 kg per Sq.M. on the prepared bituminous cleaned with mechanical broom

DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates)

BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing & Laying mastic asphalt 25mm thick with 10/20 grade bitumen including producing the same at computerized batch mix plant transporting the same to site by means of mastic cooker, laying the same with mastic paver & including all necessary tools, labours & barricading, spreading of aggregate as antiskid measures by means over newly laid mastic asphalt as per prevailing MCGM specifications clause no.365 of Road works as directed by engineer in charge, (note : The material specifications / gradation and content shall be specified in the relevant IS codes)

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing Excavator (JCB JS140/Tata Hitachi EX120 or equivalent)) of 0.6 Cum per hour

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Railing Painting Repair of steel railing to bring it to original shape cleaning and repainting as per drawing etc. complete

Tree Painting-geru White washing two coats on parapet walls and white washing and geru lime painting to tree trunks including preparation of surface by cleaning scraping etc. complete

Cautionary Board Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 900 mm made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B …

Mandatory Board Providing and fixing Mandatory/Regulatory sign boards in circular shape of 900 mm dia made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground,...

Informatory Board Providing and fixing informatory sign boards in rectangular shape of size 1.80m x 0.90m made out of 3mm aluminum composite panel bonded with IRC Specified colour of retro reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive,...

Water table P/F precast M-20 grade concrete water table size 30 cm X 30cm X 10cm etc. complete.

Parabolic Divider Providing , supplying and fixing Precast parabolic central divider of M-20 grade and applying 2 coats of flat oil paint etc. complete.

UTWT Providing and laying M60 high grade high performance pavement quality concrete ……etc complete.

Transverse contraction joint Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

Low Density Polyethylene Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

contraction joints polysuphide sealent Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)

M40 PAVEMENT Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge.

Litre bins SS Dust Bin two sides for extra strength during oscillating movement. Oscillating arrangement for easy unloading of Garbage. Area :0.765 Sqm , Capacity In Litres 42 Ltrs, Height : 0.92m

Gantry Board Providing and erecting Overhead signs made out of 4 mm aluminum composite panel with 0.5 mm skin thickness on either side bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012, with designed back support frame of mild steel angle with vertical and lateral clearance given in clause 801 and 802, duly painted on back side with two coats of grey stove enamel paint and installed as per clause 802.6 over a designed support system of structural steel work trestles and trusses of sections and type as per structural design requirements and approved plans including painting with one coat of epoxy primer and two coats of epoxy finish paint.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro- prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer including the Digitally Printed areas with Latex printing technology with sheeting manufacturer approved inks and laminated with UV overlay film and this warranty certificate along with sheeting manufacturer attested 3 years outdoor weathering test report from Indian govt lab must be submitted to the Engineer in charge by the contractor/supplier.This item does not include the cost of structural steel work required for support system.

Stamped concrete Providing, placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5 kg per sqm, including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable, 30% solids clear sealer @ 150 to 250 gms per sqm using surface roller and protecting from falling dust, dirt, etc complete as per the specifications and directions of Engineer-in-Charge or Landscape Architect. (The base concrete shall be paid seperately as per the type or grade of concrete from USOR 2013 Concrete Works chapter.)(Refer sketch 30)

Brick Work Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Plastering inner & Outer area Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete. b) cement ratio 1:4 With Prior Approval of Concerned S.E.

Illuminated LED Kerbstones Providing and fixing Illuminated LED Kerbstones. size of Kerbstone will be (500mm, 150mm,150mm), Kerb Angle- 45 Degree,. Material Body- HDPE. Connectors Rating - IP67, Tested - ISO-IEC 60529, IRC 86-193, Madhur OMG, IS0694, LM 80, VLC, HLC,. Thermal Stablility - -40' to 120' celcious. Input voltage -230v AC, Output Voltage 36 V DC. Frequency 50hz. LED Operational life-10000Hrs.

Dismanling Brick work Dismantling brick masonry in Mud and stacking the materials as directed with all leads, lifts etc. complete.

Dismantling tiles Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Mural Painting Cleaning of existing mural and removal of old paint of the existing mural followed by PU paint grade esdee paints or duco paints having application of 2 coats and final coat of clear PU paint matt or glossy finish, as directed by engineer in charge.etc. complete.

3D painting Designing, Conceptualization & painting of 3D artistic on any surface at all height and location as directed. The paint should be used for the artistic painting is high quality acrylic paint. painting should be coated with weather proof warnish.

Designing, Providing & Installation of Wall mural related to freedom fighter, outside the jail wall as shown in the picture below . The material for this sculpture is Fibre/FRP . The Length of the mural should be minimum 15m with minimum height of 3 m, Size of the mural shall be in proportionate to the height of the sculpture. Thickness of FRP material should be 5-10mm. Including all cost of design, Making models (if any), making mural, inspection charges, Transportation, Fixing at site, Construction of Foundation in RCC- M20 Grade Concrete including Reinforcement(TMT/FE 500), Pedestal including all material required for fixing the mural, coating the pedestal with Coaltar Epoxy Coating, all Filling material upto the base of mural, polishing and painting of the mural, as directed by Engineer in Charge. (Variation in size off mural shall be +-10% in Length, Width and Height shall be permitted.) Inclusive all taxes Exclulding of GST .etc. Complete.

Designing, Providing & Installation of Sculpture of Abstract of DNA Strand, Since the junction caters to the ESIC Hospital as shown in the picture below . The material for this sculpture is Fibre . The Height of the Sculpture should be minimum 3m, Size of the sculpture shall be in proportionate to the height of the sculpture. Thickness of FRP material should be 5-10mm. Including all cost of design, Making models (if any), making sculpture, inspection charges, Transportation, Fixing at site, Construction of Foundation in RCC- M20 Grade Concrete including Reinforcement(TMT/FE 500), Pedestal including all material required for fixing the sculpture, coating the pedestal with Coaltar Epoxy Coating, all Filling material upto the base of Sculpture, polishing and painting of the sculpture, as directed by Engineer in Charge. (Variation in size off sculpture shall be +-10% in Length, Width and Height shall be permitted.) Inclusive all taxes Exclulding of GST .etc. Complete.

Designing, Providing & Installation of Sculpture of Mosaic of fish/ whale – representing water life as shown in the picture below . The material for this sculpture is Metal/ Wire Mesh . The HEight of the Sculpture should be minimum 3m, Size of the sculpture shall be in proportionate to the hEight of the sculpture. Thickness of FRP material should be 5-10mm. Including all cost of design, Making models (if any), making sculpture, inspection charges, Transportation, Fixing at site, Construction of Foundation in RCC- M20 Grade Concrete including Reinforcement(TMT/FE 500), Pedestal including all material required for fixing the sculpture, coating the pedestal with Coaltar Epoxy Coating, all Filling material upto the base of Sculpture, polishing and painting of the sculpture, as directed by Engineer in Charge. (Variation in size off sculpture shall be +-10% in Length, Width and HEight shall be permitted.) Inclusive all taxes Exclulding of GST .etc. Complete.

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92Kilogram/ r. metre

Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.

Providing and laying Indian paTent stOne flooring 40 mm thick with M-15 grade concrete using 6 mm to 20 mm metal over bedding laid in proper grade and slope or over the slab, including compaction, marking lines, to give appearance of tiles as per the approved pattern, finishing smooth with cement slurry as mentiOned below, curing etc. complete. a) In plain natural/ grey colours.

b) In red colours

Supplying Labour for Traffic Regulation as directed by engineer in-charge

Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.

Supply Of CPVC Pipes Pr/supply of CPVC pipes of following class and diameter incl all taxes insurance Etc com 32mm dia.

40mm dia.

50 mm dia

Providing and applying Two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC‘s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on One coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be dOne by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once Only for execution of all items for such works.

Providing and applying epoxy paint primer with middle coat and top coat to superstructure including scaffolding etc complete.

Cleaning of existing mural and removal of old paint of the existing mural followed by PU paint grade esdee paints or duco paints having application of 2 coats and final coat of clear PU paint matt or glossy finish, as directed by engineer in charge.etc. complete.

Providing and erecting Overhead signs made out of 4 mm aluminum composite panel with 0.5 mm skin thickness on either side bonded with white retro reflective sheeting of Class B ( Type IV High inTensity micro-prismatic grade sheeting-HIP) having pressure sensitive adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012, with designed back support frame of mild steel angle with vertical and lateral clearance given in clause 801 and 802, duly painted on back side with Two coats of grey stove enamel paint and installed as per clause 802.6 over a designed support system of structural steel work trestles and trusses of sections and type as per structural design requirements and approved plans including painting with One coat of epoxy primer and Two coats of epoxy finish paint.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High inTensity micro- prismatic grade sheeting-HIP) sheeting shall have 7 years writTen warranty from the manufacturer including the Digitally Printed areas with Latex printing technology with sheeting manufacturer approved inks and laminated with UV overlay film and this warranty certificate along with sheeting manufacturer attested 3 years outdoor weathering test report from Indian govt lab must be submitted to the Engineer in charge by the contractor/supplier.This item does not include the cost of structural steel work required for support system.

Providing and fixing stainless steel bollard of steel pipe 1.00 metre long of 250 mm inner diameter and circular top plate of 350 mm diameter with 5 mm thickness on deck of jetty in cement concrete including necessary fixtures and fasTening etc. complete. (Stainless steel of grade S-304)

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The hEight, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and hEight not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a Two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.

Concrete -Compressive Strength test OF C.C. Cube (Set of 3 cubes).

Basic Test of Aggregates - Water Absorption, Specific Gravity,Impact Value, Crushing Value.

for Brick -Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).

for StOne- Crushing Value/Compressive Strength, Water Absorption & Specific Gravity,

DBM & BC - Extraction Test.(Bituminous mix)

Providing Supplying & Erecting Glowing Street park will contint various elements which will spread on 60 to 75 feet wide clement and 10 to 16 feet high Including the projected base and will carry different surfaces in the elements in different forms and shapes which will have the night glowing properties in various colours partens and all the illumination will sync and blend as per design. The initial structures shall be futuristic flow designs and the inner material will be will be MS steel which has to be bended as per the design And the entire structure has to be treated with anti rust coatings from all the sides and shall be of premium quality. The initial base of the structure shall have solid RCC pile footing of M25 to 30 and it shall be installed on the footing projected pillar and shall be connected with the plinth beam to handle the wind pressure & other rough conditions A) BASE-There will be Multiple Murals to be installed in RCC pile footing pillar of M25 to M30 cement concrete mix, and its shall have the 10 gauge hollow me rectangle pipe which shall be 4" by 2" & 6" by 6" in Dia, which has to be bended as per drawing from machine and they shall have Semm thick 12" by 12" and 16" by 16" MS Steel plate base which shall be connected with another 8mm thick steel plate which has to be fabricated then casted on the footing pillars as well as plinth beam as per design AY FLOWER STRUCTURE- Each Flower shall be of 5 feet by 5 feet in dia and there will be total 4 flower stand and each on will carry 2 flower from each side ie, total 4 flowers on each stand the flower initial structure shall be of 10 gauge steel which shall be 4 inch tick and the flower shall be 2 in dia and 10 inch wide in leaf form.centre part shall be 10 gauge thick which shall be 12inch by 12 inch round metal fabrication which shall be the back connecting plate of 10 gauge with 5 connection bolts of 12mm, and the flower shall have the connector to connect the dual flowers which shall be connected with the main stand. (B) INNER STRUCTURE- Inner structure shall be of 10 gauge steel which shall be 4 inch tick and 10 inch wide in futuristic form. centre part shall be 10 gauge thick which shall be 12inch by 12 inch round metal fabrication which shall be the back connecting plate of 10 gauge with 5 connection bolts of 12mm, and the Element shall have the connector to connect the dual elements which shall be connected with the main stand. (C) MAIN STAND- The flower main stand shall be 4 inch by 2 inch 10 gauge metal coil pipe which shall be treated with anti rust coats on overall surfaces, which shall be moulded as per drawing with the machine, the stand shall have automotive grade Duce paint as per drawing, and other side it shall have 4mm thick 8 microns premium outer grade Aluminium composite panel (D) LIGHTS The lights of the glowing elements will be LED programmable lights which shall be programmed to play pattens the lights shall ip 67 grade and shall have the warranty period of minimum 2 year, and the lights shall be connected with the server which shall be installed in the special lockable cabin to be created on the base as per drawing the lights shall have the capacity and they shall be filled placed inside the element which must not have dark spaces cavities and should have rgb output of 200- lumens which must be blocked controlled by blocking it with translucent unbreakable plexi glass as per desired output

Providing mixing and ageing de iding. Supplying & Laying a solvent free. DECKSHIELD-D PU Traffic Desk C Driveways & Parking Beys, walk ways, Ramp &ther Area Make TREMCO at a thickness of 1 An approximately a Green Label certified to elyurethane car park deck outing system providing a colourd watertight hand story, husement and her trafficable suponded floor surface which said should be at mum of 25 Nm2. free from laitance dut and her contaminatio Tecnical Specification Fire resistance: BS476 Pan 3 Designated EXT FEAA. Slip resistance: TRRL Pendulum Slip Test Dry-40 Wes-40 (low slip petals Thermal resistance Soflens over 70°C. Hardens on coeling resistance Resistant to petrol, diesel, antifreeze hydratic fail, chlorides and hatory acids Abrasion resistance: 0.1g loss per 1000 cycles as per ASTM D60 11 kg loading CS17 wh Restance to Chloride ions: No chloride ion penetration after 28 days DOT BO474 Water Permeability Nil-Kanten test (mpercable) Bond Strength: Greer than cohesive strongth of 25 Nimm2 cancre >1.5 MP VOC Content: Very Low 20 glas per 15011890-2 UV Light resistance Excellent (non-yellowing) with UV resistance coming Opinnal Methodology/Application: a) Scratch Ceat Primer Coat: Supply and apply of Deckshield SF as scratch out with plain trowel on to pre b)Body Coat and Sand Scattering: Apply body coat Deckshield ST on to day scratch out using set rubber se and finish with medium pile roller follow by scattering wearing aggregate with specified grade 2 to 3 Kg Sq substrate with a specified consumption and allow it to dry per anti-skid profile requires nts onto wet film and allow it to cure for 6 to 8 hours or overnight Finish Coat: Apply high build Deckshield Finish Coat with approved colour and a specified consumption singh squeegee and back roll with medium pile roller to achieve consistent profile d)UV Cost: Apply Deckshield UV for the area exposed to UV using brush or roller within 24hrs of application of Deckshield Finish Followed by opening to the Light traffic after 24 hours for foot traffic, 72 hours for vehicular traffic

Preparing Shrubbery:- Excavating the ground to a required depth of 30cms, Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30 cms. Mixing garden den soil and manure thoroughly well, leveling, watering on previous night. Planting well developed Shrubs plant 0.5 Mtrs.apart as directed and maintaining till well established by watering, weeding, Stirring, replacing of casualties the etc. complete. (Side Bay Footpath)

Preparing instant Lawn :- Excavating the ground to a required depth of 20cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20 cms. Mixing garden soil and manure thoroughly well, leveling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling, etc. complete. (Side Bay Footpath)

Preparing flower Bed:- Excavating the ground to a required depth of 30cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30 cms. Mixing garden soil and manure thoroughly well, leveling, watering on previous night. Planting seedlings of required annuals 25 cms. apart maintaining till well established by watering, weeding, Stirring, replacing of casualties etc. complete. (For Divider along 4 sides of circle)

Mazdoor - 1 labour - 2 circle (PWD SSR 2022-23, Pg No.546 It No.80

Mali - 1 labour - 2 circle (PWD SSR 2022-23, Pg No.546 It No.62

Suply of Water tanker - for no borewell areas 1 Tanker/ 3 Circle - 12 Circle, 3 days interval except 4 months rain

Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Providing & erecting 9 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 155 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Supply and Erection of G.I. bracket for flood light fitting complete with bending, cutting, driling and welding complete errected at position with necessary material duly PU painted

Supply and erection of BREEZA type decorative hot dip Galvanized double arm bracket of 1.5 Meter long made from 48.3 mm OD pipe, min 3 mm thick with cross support of 33.7 mm OD pipe, min3 mm thick with cap pipe length of 0.450 Meter suitable for Oct pole with top of 70 mm, with 4 Nos bolts. The Bracket shall be capped with suitable decorative STEEL/FRP ball duly bolted/ welded. The tilt angle shall be 10 to 12 degree as directed by Engineer - in - charge. BREEZA type bracket or its equivalent as per the drawings enclosed.

Supply and erection of Hot dip galvanized Ring for installation of mini high mast suitable for 4 Nos of LED Flood lights. The outer dia of ring shall be 600 mm. The ring shall be of 50 mm dia B class pipe with three supports to Sleeve, the sleeve shall be of 500 mm length and 4 mm thick duly provision of 4 nos bols and shall be suitable to fit on Octagonal pole of 70 mm AF

Supplying and erecting pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. strip complete with all materials as per specification no. EA-EP

Supply Installation Testing & commissioning of Integral high pressure Die cast/extruded aluminum LED Floodlight luminary the system wattage (fixture's total power consumption)should be 150W +/- 5 Watt Details as per technical specification attached.

Supply Installation Testing & commissioning of Integral high pressure Die cast/extruded aluminum LED Streetlight luminary the system wattage (fixture's total power consumption) should be 120W +/- 5 Watt Details as per technical specification attached.

Supply Installation Testing & commissioning of Integral high pressure Die cast/extruded aluminum LED Floodlight luminary the system wattage (fixture's total power consumption) should be 200W +/- 5 Watt Details as per technical specification attached.

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing M20 concrete for resurfacing the road.

Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Providing PU paint to octogonal poles as required of desired colour duly finished in an approved manner for 7 mtrs long pole

Providing PU paint to octogonal poles as required of desired colour duly finished in an approved manner for 9 mtrs long pole

Providing PU paint as required of desired colour duly finished in an approved manner to BREEZA/MARVEL tyle decorative hot deep galvanized double bracket of 1.5 meter

Providing PU paint / Powder coating as required of desired colour duly finished in an approved manner for 600 mm dia. Mini highmast ring

Supplying and erecting Recess mounted any mono colour 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Providing and erecting 36W Mono colour Façade lighting with IP66 rating with beam angel variation possibility as directed by engineer incharge,equivalent to Leksa, Bajaj, Philips, Crompton

Supplying and erecting LED strip light having combination of three colour or single colour, 5W per meter with IP67 protection and IP 68 Driver with 2C x 1.5 sq.mm.Cu flexible wire with 2 year warranty

SITC OF Motif (like Peacock/Dry Fountain) for Garden of size 3.5 mtr by 5 mtr made of MS/aluminium structure with IP67 FLEXIBLE 24 V LINEAR LED STRIPCOLOR TEMPERATURE (CCT) for outdoor all weatherproof condition and programmable DMX based colour changing peacock Feather made with combination of LED Pixel Dot, Color : RGBW , Protection : IP65, Power consumption: 1.44W, Pixel Housing - Transparent PC - Milk white diffuser, Control : SPI, DC5/12/24V, RGBW Pixels : 4 Channels, Working temperature: -20° ~ 85°, Automatic address code

SITC of Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. - 6No Nos of 16A SP Outgoing MCB's. - 1No of 32A TPN Incoming MCB

Supply and installation of functional and decorative outdoor designer customizable LED luminairy suitable for existing streetlight pole installation. Luminaire shall be made from engineering materials or optically coloured engineering plastics or Acrylic and shall be with LED. The luminiare shall be as per design approved by TMC authority and of max size of 1150mmx1150mm. The light source of luminaie shall be LED with operative range of 12V/24V DC and shall suitable for operating temperature range from -10 degree C to +45 degree C. The fittings shall bear manufacturer's warantee for five years. The fittings shall be installed on streetlight poles with staineless steel clamps securely bolted and installed and commissioned with required length 3 core X 2.5sqmm PVC Cu unarmoured cable, driver with IP67 including all labour material and machinery (Man Lifter) and other required material.Luminaire shall be with IP65 protection. The luminairy shall be fixed in a powder coated MS frame. The wattage of the luminaire shall be 275 w to 325w

Supply and installation of functional and decorative outdoor designer customizable LED luminairy suitable for existing streetlight pole installation. Luminaire shall be made from engineering materials or optically coloured engineering plastics or Acrylic and shall be with LED. The luminiare shall be as per design approved by TMC authority and of max size of 1150mmx1150mm. The light source of luminaie shall be LED with operative range of 12V/24V DC shall suitable for operating temperature range from -10 degree C to +45 degree C. The fittings shall bear manufacturer's warantee for five years. The fittings shall be installed on streetlight poles with staineless steel clamps securely bolted and installed and commissioned with required length 3 core X 2.5sqmm PVC Cu unarmoured cable, driver with IP67 including all labour material and machinery (Man Lifter) and other required material.Luminaire shall be with IP65 protection. The luminairy shall be fixed in a powder coated MS frame. The wattage of the luminaire shall be 125 w to 175w

Variable Messaging Display with GSM router and Data SIM for its operation - Type 1 including central application for contain management Display area 1152mm X 2304mm LED Module Pixel Pitch P16 LED Module 12 X 24 Details as per technical specification attached.

Pole with foundation for VMD for Type 1 VMD Details as per technical specification attached.

Supplying, erecting, testing and commissioning of 1kVA capacity online pure sine wave, with backup time of ....... hrs. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 40A to 63A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting balelite sheet 6 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete.

Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982

Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting Single Pole Bakellite 35 Sqmm connector for connecting wire from MCB to cable

S/E MCB/RCCB Channel Support patti

Supplying & erecting approved make 415V 63A porcelain base neutral link complete erected in provided M.S. box.

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete

Supplying and erecting Iron, sheet metal work consisting of CRCA Sheets, Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority

Providing cement concrete for foundation or for concrete filling in 1:3:6 ratio with 20 to 25 mm. stone metal duly plastered with necessary curing for pole muffing or any other purposes.

Supplying and erecting four pole power contactor 430 V, 40 A for time switch complete erected on provided wooden block/ box, with necessary materials

Supplying & erecting crimping type copper lugs for cable upto 16 sq mmcomplete as per specification No. CB-L/CU

SITC of nature switch infrared for making ON/OFF street light as sun set and sun rise. The nature switch shall be housed in FRP casing with protection of MCB opening voltage 150V to 300V 30-60 Hz

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

MSEDCL Charges for Lights connection

Second Year Comprehensive Maintenance of all electrical works (5% of Estimate Cost)

Third Year Comprehensive Maintenance of all electrical works (10% rise on Second Year Maintenance Cost)

Forth Year Comprehensive Maintenance of all electrical works (10% rise on Third Year Maintenance Cost)

Fifth Year Comprehensive Maintenance of all electrical works (10% rise on Forth Year Maintenance Cost)

Architect Fee @ 2% on construction Work (Civil, Landscape, Electrical)

Shreeji EPC Pvt Ltd