Renovation of House No. 1914 (Type-VIII), Sector 39, Chandigarh (IBM No. W4/2025/25187)

Providing and fixing soil, waste and vent pipes :

75 mm diameter :

Centrifugally cast (spun) iron socketed pipe as per IS: 3989.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 75 mm outlet

Sand Cast Iron S&S as per IS- 3989

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall.

20 mm dia. nominal bore.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :

15 mm dia nominal bore.

20 mm dia nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

20 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work):

15 mm nominal bore

20 mm nominal bore.

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks.

Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.

Providing drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter

Providing and fixing CP Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange of Cat No. (CON-083FTK ) and Regular Body of Concealed Stop Cock (without Exposed Part) of Cat No. (ALD- 083) complete in all respects. Make Jaquar complete in all respect to the entire satisfaction of EIC. or equivalent range of AOR

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink without drain board

27'' X 20 '' bowl depth 200 mm.

Construction of Curb consisiting of cement concrete 1:2:4 with PVC pipe 4"6 Kg pressure per cm2 upto average length of 1' including cost of CP hinged grating and cost of sand, bajri etc. complete in all respects.