Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.8 LAccepted-AOC VPO SATROD KALAN HISAR HARYANA | HISAR | HISAR | HARYANA | L1 | Accepted-AOC found lowest | |
| 2 | L2₹11.8 L+₹3,622 (0.31%)Rejected-AOC | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹12.4 L+₹56,436 (4.79%)Rejected-AOC GOVT CONTRACTOR VILL NAYA SUJAN FEROZPUR KALAN TEH DIST PATHANKOT PIN 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L3 | Rejected-AOC not found lowest | |
| 4 | L4₹12.5 L+₹72,150 (6.12%)Rejected-AOC VILL DANNA PO TEH BASANTPUR DIST KATHUA JAMMU KASHMIR | BASANTPUR | KATHUA | JAMMU KASHMIR | L4 | Rejected-AOC not found lowest | |
| 5 | L5₹12.5 L+₹75,800 (6.43%)Rejected-AOC | L5 | Rejected-AOC not found lowest |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
22 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Nitin Bisht
GE Basoli PO Lakhanpur Distt Kathua 184152
Repair to facia chajjas plaster work glass panes and misc works in Md OTM Accn at Basoli Mil Stn under GE Basoli
2023_MES_605189_1
GE/BAS-40/2023-24
Open Tender
Civil Works
Item Rate
180 days
Basoli station under GE Basoli
Class E category a (i)
8 documents required · 8 mandatory
₹500
GE Basoli
₹30,000
Yes
6 Sept 2023
23 Jun 2023
24 Jul 2023
23 Jun 2023
22 Jul 2023
8 Jul 2023
Amount
M & L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 including at the edges of roof or any where at any height demolition of old Brickworkor stone masonary complete all as specified and as directed by Engineer -in-Charge
Ditto all as per item No 1 here-in-before but plain sheets
Preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified and as directed including Preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified and as directed including Rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying two coats of oil Bound destember complete all as specified and as directed including Rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. including Rendering 15mm thick in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed.
M & L preparing new plastered or unplastered surfaces of walls and applying two coats of white wash including rendering 15 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces upto third Floor all as specified
M & L two coat of oil bound distemper on new plastered/putty surfaces of walls including including rendering 15 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces upto third Floor all as specified
M & L preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash in ceiling including rendering 10 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces upto third Floor all as specified
M & L two coat of cement base paint on new plastered surface of walls including rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement including taking down old plastered surfaces upto third Floor all as specified .
M & L for complete removal of existing treatment on walls/ceiling and making true uniform surfaces by roller by 3mm thick wall care putty on old wall/new plastering surface all as specified and directed by Engr in charge
M & L for preparation of old decorated plastered or un plastered surface of wall and applying one coat of white wash upto Third Floor complete all as specified.
M & L for preparation of old decorated plastered or un plastered surface of ceiling and applying one coat of white wash complete all as specified.
M & L for preparation of old decorated plastered or un plastered surface of walls and applying one coat of oil bound distemper upto any height filling the gap or unequal surface with cement mortar /chalk whiting/Putty in any shade complete all as specified.
M & L for preparation of old decorated plastered or un plastered surface of walls and applying Two coat of oil bound distemper upto any height filling the gap or unequal surface with cement mortar /chalk whiting/Putty in any shade complete all as specified.
M & L for preparation of old decoratede plastered or un plastered surface of wall and applying one coat of cement base paint including scaffolding and filling the gap or unequal surface with cement mortar /chalk whiting/Putty upto Third Floor of any tinnt to match existing shade of walaps with ls and AC roof complete all as specified.
Preparation of old decorated surfaces of wall and facia/Chajjas and applying one coat weather proof apex paint upto Third Floor of any tint etc complete all as specified and directed by Engineer-in-Charge.
Taking down, dismantling of broken/loose portion of chajja , facia of any dimension and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including steel bars 8mm/10mm/12mm/16mm as per site requirement with strripus, including welding work if required and necessary form work/scaffolding and matching with existing surface of facia, (including white wash / colour wash or cement base paint/Apex Paint as per dirn by engr in charge ) including water curing as per dirn of engr in charge complete all a specified and directed by Enginer -in-Charge.Note necessary form work/ scaffolding is also removed after the completion of work and safety norms will be maintained by contracor as per safety Manual .
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.
75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Plain cement concrete padding 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate) of uniform thickness 50mm, padding shall be furnished even and smooth w/o using extra cement, all as specified and directed by Engineer-in-Charge.
M& L applying water proofing membrane APP (Atactic Polypropylene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyester Non woven fabric weighing not less than 160 gms per sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces including 20 mm thick screed bed in cement mortar (1:4) even and fair & including taking out /demolition of old treatment complete and removal of debrises not exceeding 50 mtr and depositing where directed complete all as specified and directed.
S&F structural steel work as in frames of PPGI facia, roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B including welding work including dismantling wrought iron or mild steel work of any descrfiption not otherwise provided incuding two coat of synthetic enamel paint over a coat of red oxide complete all as specified.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including PCC (1:3:6) work at the edges of walls and PPGI sheets is to be fixed in wall min 2 inch by cutting the wall by cutter /any other instrument all as per dirn of Engr in charge including dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified.
Ditto all as per item No 23 here-in-before but plain sheets
S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints fixed to walls
Disconnecting existing tanks,setting side for repairing,cleaning and removing all scale dirt,etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipes etc of capacity upto and including 500 ltrs abd endrosed the word '' CLEANED ON WITH DATE''with white paint including replacement of broken/unservicable fittings such as Float Valve, Elbow.tee,socket,nipples of any size etc complete all as specified.
Disconnecting existing tanks,setting side for repairing,cleaning and removing all scale dirt,etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipes etc of capacity Exc 500 Ltrs and upto and including 1000ltrs abd endrosed the word '' CLEANED ON WITH DATE''with white paint including replacement of broken/unservicable fittings such as float valve ,Elbow.tee,socket,nipples of any size etc complete all as specified.
S & F 15mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified.
S & F 20 mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified.
40mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring in Duct Areas and any where including finishing the top surface even & smooth, without using extra cement complete all as specified and as directed by Engineer-in-charge.
S&F in repair Brass Float Ball valves, high pressure aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified.
S&F in repair Brass Float Ball valves, high pressure aluminium rod & high density plastic ball, screwed for iron pipe 25 mm dia (minimum weight 210 gms) complete all as specified.
S & F in repair Gun metal,globe or gate valve screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, supplied and fixed in repairs complete all as specified.
S & F in repair Gun metal,globe or gate valve screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 20 mm, supplied and fixed in repairs complete all as specified.
S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls all as specified and directed..
S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls all as specified and directed..
S & F PVC SWR Bends/Tee in any radius 110 mm bore with access door in repair all as specified and directed..
S & F PVC SWR Bends/Tee in any radius 75 mm bore with access door in repair all as specified and directed..
S&F PVC (SWR) Vent cowl 110 mm bore in repair all as specified and directed..
S&F PVC (SWR) Vent cowl 75 mm bore in repair all as specified and directed..
Welding in repairs exc 2.5cm but n. exc. 5 cm in length, thickness of metal to be welded exc,6mm but n.exc. 9mm, including all necessary arrangement for welding complete all as specified and directed.
S & F in repair Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including 25 mm Brass Float valve including taking down existing tank complete all as specified.
Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including 25 mm Brass Float valve including taking down existing tank complete all as specified.
S&F Steel windows/ventilator (Box type) factory made glass/glazed shutter,and including shutter for wire mess and Glass (glass panes and wire mesh shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills and two coat of synthetic enamel paint over a coat of red oxide including taking down of old windows complete all as specified
03 mm thick sheet glass/figured (frosted), ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.
03 mm thick sheet glass in repair , ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified. complete all as specified.
All as per item No 46 here-in-before but figured (frosted) glass.
M & L in repair 5 mm thick Glass Panes of any colour including with rubber gasket and beading /Glazing clip size all as specified and directed
Om Sai Ram Builders
BALKRISHAN GUPTA AND SONS
Ms International Engineers
Amrik Construction co
M/s. Ram Pal Sharma
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .