REPAIR/ REPLACEMENT OF STREET LIGHTS, PAINTING OF HT/LT STEEL TUBULAR POLE AND CONNECTED ITEMS OF DISTRIBUTION SYSTEM IN KAMPTEE UNDER GE KAMPTEE

Amount

Supply and fix LED street light luminaires of capcity 60 watts with pressure die cast aluminium housing heat resistance toughened glass, IP 66 protection complete with driver,2.5 sqmm 2 core multistranded Aluminium wire for connection from street light fitting to OH line or junction box,and fixing accessories including taking down old unserviceable fitting all as specified and as directed. Make :- Cat No. LSTP-60-CDL of CG or equiv.in Philips, Bajaj, Wipro as approved by GE.

Supply and fix LED street light luminaires of capcity 45 watts with pressure die cast aluminium housing heat resistance toughened glass, IP 66 protection complete with driver,2.5 sqmm 2 core multistranded Aluminium wire for connection from street light fitting to OH line or junction box,and fixing accessories including taking down old unserviceable fitting all as specified and as directed by Engr -In- charge. Make :- Cat No. LSTS-45-CDL-1 of Crompton or equiv.in Philips, Bajaj, Wipro as approved by GE.

Supply and fix in repair LED flood light fittings with pressure die-cast housing and toughened glass cover 100 watt IP65 protection including driver prewired with 3 core multistranded copper wire 1.5 sqmm from fitting to OH conductor / connector and necessary mounting arrangement as required at site complete all as specified and directed. Make:- Crompton/Phillips / Wipro/ Bajaj as approved by GE.

Taking down existing street light fitting, any size, any type (HPSV, HPMV, LED, MH, FTL, energy saving street light fitting, T5 multiple FTL 4x14, 4x24 watt, CFL) from pole / wall after disconnecting connection from pole and carrying out repair works by replacing choke, bipin holder, holders, ignitor, unserviceable flexible wire, tube rod, CFL etc & refixing the fitting on pole / wall including connection with overhead lines / connector & testing etc complete all as specified and directed. Note:- Spares will be measured under relevent items as Supply and fix.

Supply and fix in repair ignitor suitable for 70W to 400W HPSV/MH lamp fitting complete all as specified and as directed. Make:- Phillips / CG / Bajaj.

Supply and fix in repair copper wound ballast suitable for HPSV lamp fitting 70 W complete all as specified and as directed. Make:- Phillips / CG / Bajaj.

Supply and fix in repair copper wound ballast suitable for HPSV lamp fitting 150W complete all as specified and as directed. Make:- Phillips / CG / Bajaj.

Supply and fix in repair copper wound ballast suitable for HPSV lamp fitting 250 W complete all as specified and as directed. Make:- Phillips / CG / Bajaj.

Supply and fix in repairs tubular HPSV lamp 70 W, single ended complete all as specified and as directed. Make:- Phillips / CG / Bajaj / Wipro / Surya.

Supply and fix in repairs tubular HPSV lamp 150 W, single ended complete all as specified and as directed. Make:- Phillips / CG / Bajaj / Wipro / Surya.

Supply and fix in repairs tubular HPSV lamp 250 W, single ended complete all as specified and as directed. Make:- Phillips / CG / Bajaj / Wipro / Surya.

Supply and fix LED driver for 100 W LED street light fittings complete all as specified and as directed. Make:- Wipro/ Bajaj/crompton/Surya or equivalent as approved by GE.

Supply and fix LED driver for 150/200 W LED street light fittings complete all as specified and as directed. Make:- Wipro/ Bajaj/crompton/Surya or equivalent as approved by GE.

Supply and fix LED driver for 25/30 W LED street light fittings complete all as specified and as directed. Make:- Wipro/ Bajaj/crompton/Surya or equivalent as approved by GE.

Supply and fix LED driver for 45/60 W LED street light fittings complete all as specified and as directed. Make:- Wipro/ Bajaj/crompton/Surya or equivalent as approved by GE.

Supply and fix in repair LED Surge protection devices compatible with industrial & Outdoor Led fixture 10 KV Voltage complete all as specified and as directed. Make:- Wipro/ Bajaj/crompton/Surya or equivalent as approved by GE

Supply and fix in repair PVC insulated sheathed twin core flat Multi stranded aluminium coil conductor 2.5 sqmm conductor 1100 volt grade complete all as specified and as directed. Make:- Finolex / Havells / Anchor / Indo Asian.

Ditto all as per item Sr No 17 above but of size 4.00 sqmm complete all as specified and as directed.

Ditto all as per item Sr No 17 above but of size 6.0 sqmm complete all as specified and as directed.

Supply and fix in repairs thermoplastic cable entry junction boxes of size 200 x 160 x98 mm and IP-65 protection level with metric knock out fixed on poles with MS clamps, nuts, bolts and washers including MCB SPN, 5-32 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., separate (detachable) gland plate, bakelite connector 4 way 20 amp, dust and vermin proof, front door opening with hinges and locking arrangement, complete all as specified and as directed. Make:- Hansel/ Neptune/ Sintex as approved by GE.

Supply and fixing of Automatic Street light Switch using NATURE SWITCH for automatic switching of street lights based on LUX level of natural light consisting with Sensor (Natural Switch) conforming to IP 65 protction including all fixing arrengment all as specified and directed. Make: Swadeep or equivalent as approved by GE.

Supply and fix MCB SP 10-32 Amps, 240 volts, 10 KA capacity complete all as specified and as directed.

Supply and fix MCB SPN 10-32 Amps, 240 volts, 10 KA capacity complete all as specified and as directed.

Supply and fix MCB TPN 32/40 Amps, 240 volts, 10 KA capacity complete all as specified and as directed.

Supply and fix bracket for street light fittings made out of 32 mm dia GI pipe of light grade 1.5 m long each bent to shape & size required & fixed to pole with and including flat iron clamps 02 Nos made out of 30 x 5 mm flat iron including GI Nuts, bolts and washers and painting of clamps and street light brackets with two coat of aluminium paint over a coat of red oxide primer and fittings bracket to street light fitting including taking down old unserviceable bracket of any shape and size all as specified and as directed by Engr- In-Charge.

Material and labour for preparing surfaces of electric poles HT/LT of any type height exceeding 7.5m but not exc 9.5m above ground level including painting of poles, MS cross arms, MS clamps, street light brackets, bracket clamps, cable protection pipe, stay etc of any sizes and shape & dusting, cleaning the surface complete and applying one coat of aluminium paint complete all as specified and as directed.

Ditto all as per item Sr No 26 above but Height of steel tubular poles 7.5 Mtrs above ground level.

Material and labour for preparing surfaces of electric HT/ LT 4 pole Structures of any make and height of pole up to 10 Mtrs above ground level including painting to four poles structure, MS cross arms, MS clamps, street light brackets, bracket clamps, cable protection pipe, stay etc of any sizes and shape & dusting, cleaning the surface complete and applying one coat of aluminium paint complete all as specified and as directed.

Material and labour for writing pole No. with letters of size 25 mm height on pole/ plate with Black synthetic enamelled paint complete all as specified and as directed by engineer in charge.

Excavation in trenches in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of Cables,poles, stay and getting out of excavated material complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested complete all as specified and directed.

Removal of surplus soil to a distance not exc. 50m and deposited where directed at a level not exc. 1.5 m above the starting point all as specified and as directed.

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 50mm outer diameter and 38 mm inner Diameter with IS 14930 (part 2):2001 laid in trenches,wall,floor,pole including bends, sockets and other connected accessories complete all as specified and directed by Engineer-in-Charge. Make:- Dura. Line/ Tijaria/ REX /KETRON as approved by GE.

Taking down the unserviceable LT cable of any size from tranches/ walls /floor etc complete all as specified and as directed by engineer in charge . Note :- Re-laying of cable route is same as old cable route .

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip, electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq mm, 4 core including testing after laid and jointed all as specified and as directed Make :- Gloster/ Polycab/Havells as approved. Note:- Excavation and earth work, DWC pipe for cable protection shall be measured and paid separetely.

All as per item No. 35 but cable size 10 sq mm 4 core all as specified and as directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.32,595.00/- ]

Vaidehi E Link

VIJ ASSOCIATES

Chinmaya Enteprises

Bidder Name

Paragon Electrotechnics

Chinmaya Enteprises

Vaidehi E Link

VIJ ASSOCIATES