SPECIAL REPAIR TO ROAD IN MT AREA OF BDE AT JALIPA MIL STN UNDER GE (A) BARMER

Amount

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

All as above item No. 1.00 but making good by applying tack coat VG-10 at 5 kg per 10 Sqm, putting in premix bituminous macadam well rammed and sealed with binder 9.8 kg per 10 sqm binded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed (including supply of premix binder and sand) with 8 to 12 tonne power roller depth of pot holes exc 30mm complete all as specified and directed.

M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm exc 50mm deep and not exc 100 mm deep complete all as specified and directed.

M&L for preparation of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing cakedmud etc, sweping with broomes and finally fanning the cleaned surfaces with gunny bages to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a priming/tack coat with paving bituminous primer VG -10 @ 7.5 kg per 10 sqm with the help of mechanical sprayer complete all as specified and directed.

M&L for premix bitumen macadam with pavment bitumen (VG-40) mixed in fully automatic hot mix plant with bitumen binder content 4.50 % by weight of total mix laid by mechanical mixer paver /rolled compaced & rolled to required gradient and camber with 8 to 10 tonne capacity power roller (consolidated thickness of 75 mm or less) complete all as specified and directed.

M&L for preparation of black top surfaces surfaces by brushing with wire brushes for removing cakedmud etc, sweping with broomes and finally fanning the cleaned surfaces with gunny bages to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a priming/tack coat with paving bituminous primer VG -10 @ 2.50 kg per 10 sqm with the help of mechanical sprayer complete all as specified and directed.

M&L for laying and consoliding bituminous premix asphaltic semi dense concrete 30mm consolidted thickness with 5.5% binder content of paving bitumen VG-40 for 10 sqm area of road including rolling and compacted to required camber and gradient 8 to 10 tone power rolled (rate shall be included as top finished similar to dense bituminous carpating) complete all as specified and directed.

M&L for preparing bituminous surface of road and marking 2.00 mm thick centre lines, stop lines, dashes, arrows etc and the like not exc. 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262 -1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old concrete surface including surface preparation of any description (Road side cement concrete kerb stone in ZEBRA Pattern) complete all as specified and directed.

M/s godara infratech and power industries

m/s jogaram sujaram

M/S HARIOM CONSTRUCTION COMPANY