Remodelling and renovation of Chandigarh Arbitration Centre (CAC) at High Extension Sector 17 Chandigarh (PHS) (Ch. to 4059 C.O. (P) Admn. of Justice

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR 2.8

All kinds of soil. DSR 2.8.1

Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10

All kinds of soil DSR 2.10.1

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia DSR 2.10.1.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR 4.1

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.4

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.10

Centering and shuttering including strutting propping etc and removal of form from 5.9.5 ( lintels beams plinth beams girders bressumers and cantilevers DSR 5.9.5

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. DSR 5.22

Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR 5.22.6

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4

Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.4.2

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. DSR 8.2

Granite of any colour and shade DSR 8.2.2

Area of slab over 0.50 sqm DSR 8.2.2.2

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Size 600x300mm) DSR 8.31

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. DSR 9.20

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 9.20.1

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), ransparent or dyed to required colour or shade, with nuts and screws etc. complete : DSR 9.96

250x16 mm DSR 9.96.2

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : DSR 9.97

250x10 mm DSR 9.97.2

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : DSR 9.100

150 mm DSR 9.100.2

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: DSR 10.14

Profile B DSR 10.14.1

Fixing with adjustable lugs with split end tail to each jamb DSR 10.14.1.1

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. DSR 11.56

Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red DSR 11.56.2

12 mm cement plaster of mix : DSR 13.4

1:4 (1 cement: 4 coarse sand) DSR 13.4.1

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR 13.88

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour DSR 13.81

Old work (one or more coats) DSR 13.81.1

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. DSR 15.2

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) DSR 15.2.2

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : DSR 15.12

Of area 3 sq. metres and below DSR 15.12.1

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : DSR 15.44

15 mm to 40 mm nominal bore DSR 15.44.1

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes, lead at site within 50 metre lead as per direction of Engineer-in-charge: DSR 15.45

Up to 150 mm diameter DSR 15.45.1

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.60

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16A

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28

Flexible pipe DSR 17.28.2

32 mm dia DSR 17.28.2.1

Providing and fixing soil, waste and vent pipes : DSR 17.35

100 mm dia DSR 17.35.1

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 DSR 17.35.1.2

Providing and fixing plain bend of required degree DSR 17.39

100mm dia DSR 17.39.1

Sand cast iron S&S as per IS: 3989 DSR 17.39.1.2

Providing and fixing heel rest sanitary bend DSR 17.40

100 mm dia DSR 17.40.1

Sand cast iron S&S as per IS - 3989 DSR 17.40.1.2

Providing and fixing collar : DSR 17.57

100 mm D SR 17.57.1

Sand cast iron S&S as per IS - 3989 DSR 17.57.1.2

Providing lead caulked joints to sand cast iron/centrifugally cast DSR 17.58

100 mm dia DSR 17.58.1

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60

100 mm inlet and 100 mm outlet DSR 17.60.1

Sand cast iron S&S as per IS - 3989 DSR 17.60.1.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall DSR 18.10

25 mm dia nominal bore DSR 18.10.3

32 mm dia nominal bore DSR 18.10.4

50 mm dia nominal bore DSR 18.10.6

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : DSR 18.11

15 mm dia nominal bore DSR 18.11.1

20 mm dia nominal bore DSR 18.11.2

Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc.: External Work DSR 18.12

50mm dia nominal bore DSR 18.12.6

Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end) : DSR 18.17

32 mm nominal bore DSR 18.17.2

50 mm nominal bore DSR 18.17.4

Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21

30 cm length DSR 18.21.1

15 mm nominal bore DSR 18.21.1.1

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46

15 mm nominal bore DSR 18.46.3

20 mm nominal bore DSR 18.46.4

20 mm nominal bore DSR 18.46.6

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. DSR 18.53A

Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76

With common burnt clay F.P.S. (non modular) bricks DSR 18.76.1

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. DSR 18.77

Const. of curb with C.C. 1:2:4 alongwith upto 1’-0” depth to made it water proof including Cost of sand, bajri complete in all respect.

Dismantling of Floor tiles and wall tiles complete in all respect.

Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation.

110mm dia.

Providing and fixing of C.P. Towel Ring Make Jaquar Range Continental Model ACN-1121N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

P/F Looking glass mirror 5mm thick of approved make with PVC beading 1-1/4"x3/4" with plastic Hard Board duly fixed on wall with screw/nuts/clips/rod plug

Providing and fixing of Chinaware Oval shape Wash Basin Make CERA Size 560 x 470 mmx190mm including CP Waste etc complete.

Providing and fixing of Chinaware Two Piece Wall Hung European Type Water Closet with all other fittings including EWC, Cistern, Seat Cover and fittings etc complete.Make CERA-CAMPBELL or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing CP Grab rail of size 300 mm complete make Jaquar Model No. 1101S or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of C.P. brass Bib cock make jaquar continental as per CAT No. 047 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of C.P. brass angle cock make jaquar continental as per CAT No. 059 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of CP Pillar cock auto closing system (Pressmatic) make Jaquar PRS- 031or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Please Enable Macros to View BoQ information