REPAIRS TO PLASTER, JOINERY, FLOORING,FALSE CEILING SANITARY FITTINGS AT KANDIVALI UNDER GE NORTH MUMBAI

Amount

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engr-in-Charge

M & L for rendering 15 mm thick cement plaster in CM 1:4, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix' of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S :1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 10 mm thick and finishing coat of 5 mm thick final rendering with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing including provide of 150mm chicken wire mesh fixed with nails at the junction of RCC columns/walls/ beams/ lintels and brick masonry at external faces before plastering including scaffolding at any height and all safety materials required for execute work etc complete all as specified and as directed by Engr-in-Charge.

M & L for rendering 10mm thick on internal wall surfaces using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Soundp last PMC-1 of M/s Sound buildcare Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:6 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over masonry and concrete surfaces and finishing with sagol finish not less than 1mm thick, including cleaning the surfaces, curing etc complete all as specified & directed by Engineer-in-Charge.

Dismantling of wall and ceiling board (fibre,pulp,insulation etc) or insulation board/slabs/blankets any thickness including cover fillets complete all as specified & directed by Engineer-in-Charge.

M & L for anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm , cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system including 12mm thick gypsum board with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete all as specified and as directed by Engr-in-Charge.

M & L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer on ceiling complete all as specified and directed by Engineer in Charge. Make:M/S SHALIMAR/M/S BERGER/M/S NEROLAC/M/S ASIAN (Tractor Brand)

Taking down chowkats or frame with shutters,n exc 1.5 sqm each (without taking off shutters from the frames) including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engr-in-Charge

Taking down chowkats or frame with shutters,exc 1.5 sqm n exc 4.00 sqm each (without taking off shutters from the frames) including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engr-in-Charge

S & F 15 micron coloured aluminium sections for sliding or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engr-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note:- (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

S & F 4mm thick black tinted glass, in square exc. 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engr-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

S & F Stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture, 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-charge.

S & F in repairs 15 micron coloured aluminium anodised grill of design No DG-101, 10 mm thick, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engr-in-Charge. Make- DECOGRILLE of Associated group or equivalent make as approved by GE

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 160 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge. Make: M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S Accucell/M/S Dura Plast Extrusion

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 156 of SSR Part II (pertaining to item No 08080) complete all as specified and as directed by Engr-in-Charge. Make: M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S Accucell/M/S Dura Plast Extrusion

S & F stainless steel butt hinges, heavy duty of 100mm size complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

S & F extruded aluminium alloy handles, fabricated type, anodised, of size 150 mm complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

S & F aluminium anodised barrel tower bolt of extruded section of size 150mm complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

S & F aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy , 250mm long, ISI marked complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

S & F pre-painted galvalume aluminium zinc coating GI based corrugated, steel sheet 0.50mm thick (total thickness including coating) of any colour having tensile strength of 550 MPA as in cladding to wall, roof covering, fixed with self tapping screws including dismantling existing asbestos sheet complete all as specified and as directed by Engr-in-Charge.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (total thickness including coating) of any colour having tensile strength of 550 MPA with as in roof covering, cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and pavings, n.exc. 15cm thickness (below or above ground level) and removal of debris outside MD land complete all as specified and as directed by Engr-in-Charge

M & L for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including joints of plinth protection filled with bitumen mastic (1:3) complete all as specified and as directed by Engr-in-Charge.

M & L for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) complete all as specified and as directed by Engr-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

M & L for glazed coloured ceramic tiles, 1st quality of size 350 x 250 x 7 mm thick or 450 x 350 x 7mm thick (or nearest size) on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including backing coat 10 mm in CM (1:4) complete all as specified and as directed by Engr-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

M & L for cleaning rubbing and polishing of machine cut Kota stone slab complete all as specified and directed by Engineer in Charge.

M & L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer above 1.5mm wall care putty complete all as specified and directed by Engineer in Charge. Make:M/S SHALIMAR/M/S BERGER/M/S NEROLAC/M/S ASIAN (Tractor Brand)

M & L for preparation of old plastered or un plastered distempered surface of wall including complete removal of existing treatment and applying two coats of distemper oil emulsion over one coat of alkhali resistant primer, over 1.5mm of wall care putty on wall complete all as specified and directed by Engineer in Charge. Make:M/S SHALIMAR/M/S BERGER/M/S NEROLAC/M/S ASIAN (Tractor Brand)

M & L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed by Engr-in-Charge. Make: SUPER SNOWCEM/DURGOCEM/SILVOCEM/AQUACEM

M & L for preparation of old plastered or un plastered decorated surfaces of walls by completely removing of existing treatment and applying two coats of cement base paint complete all as specified and as directed by Engr-in-Charge. Make: SUPER SNOWCEM/DURGOCEM/SILVOCEM/AQUACEM

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. Make: Asian Paints/Nerolac Paints/Berger Paints/Shalimar Paints

S & F in repair 32mm bore low density polyethylene pipes(LDPE) of pressure rating 6 kg/ cm2 laid in trenches or in floors complete all as specified and as directed by Engr-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC

S & F in repair 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-Charge. Make: Supreme/Prince/Kisan/Finolex/Infra

S & F in repairs, bib taps, fancy type, chromium plated, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed. Make : Jaypee/GMP/Neta/Zoloto/Prayag polimer/Prima

S & F in repairs concealed type stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engr-in-Charge. Make : Jaypee/GMP/Neta/Zoloto/Prayag polimer/Prima

Supply only in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engr-in-Charge. Make : Jaypee/GMP/Neta/Zoloto/Prayag polimer/Prima

S & F in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 'P' or S trap, connector piece of CI pipe upto 'T'/ 'Y' joint and connection to trap and to flushing pipe, anti-syphonage pipe etc and provision of lime concrete bedding complete all as specified and as directed by Engr-in-Charge. Make:Neycer Kermag (Standard)/Hindustan Sanitary Ware Industries (Ist Quality)/Parryware (Super Fine)/Cera(Ist Quality)

S & F in repairs PVC valveless, syphonic action type low level dual flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever complete all as specified and as directed by Engr-in-Charge. Make:Neycer Kermag (Standard)/Hindustan Sanitary WareIndustries (Ist Quality)/Parryware (Super Fine)/Cera(Ist Quality)

S & F in repairs flush pipe of polyethylene of low or high density or PVC, 32mm dia complete all as specified and as directed by Engr-in-Charge. Make : INFRA/PRINCE/SUPREME/ASTRON PLASTIC/Kisan Pipes/Astral

S & F in repairs vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm excluding taps, waste chain and plug and porcelain stopper including brackets, chromium plated waste coupling, waste fitting etc, cutting for and pinning in ends of brackets or erecting stand, connecting to supply and waste pipe complete all as specified and as directed by Engr-in-Charge. Make:Neycer Kermag (Standard)/Hindustan Sanitary WareIndustries (Ist Quality)/Parryware (Super Fine)/Cera(Ist Quality) Note- Pillar tap, waste fittings, PVC connection, waste pipe shall be measured separately

S &F in repair vitreous china bowl urinal, flat back, size 465 x 355x 265 mm white (minimum), with grating and urinal for discharge pipe, waste pipe complete including providing and fixing plugs, bedding urinal against wall in CM securing urinal to plugs with and incl 60mm long brass screws, pointing around, fixing cistern with brackets, flush pipe grating and union for discharge pipe complete all as specified and as directed by Engr-in-Charge. Make:Neycer Kermag (Standard)/Hindustan Sanitary WareIndustries (Ist Quality)/Parryware (Super Fine)/Cera(Ist Quality)

Supply only PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed by Engr-in-Charge. Make : INFRA/PRINCE/SUPREME/ASTRON PLASTIC/Kisan Pipes/Astral

Supply only in repairs PVC connection 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-Charge. Make : INFRA/PRINCE/SUPREME/ASTRON PLASTIC/Kisan Pipes/Astral

S&F in repair, CP brass soap Dish Cat No- BA-15 (Make-Prayag or equivalent as approved by GE) complete all as specified and directed by Engr-in-Charge. Make :Neycer Kermag (Standard)/Hindustan Sanitary WareIndustries (Ist Quality)/Parryware (Super Fine)/Cera(Ist Quality)

S & F in repairs tubular towel rail chromium plated 20mm dia, 'D' type, 60cms long between flanges fixed to walls with screws complete all as specified and as directed by Engr-in-Charge. Make : Neycer Kermag (Standard)/Hindustan Sanitary WareIndustries (Ist Quality)/Parryware (Super Fine)/Cera(Ist Quality)

M & L for opening out cracks in wall surfaces in 'V' shape by mechanical grinder and removing the loose material. filling with crack filler of Dr. Fixit crack-X, shrink-free or equivalent all as per manufacturer's instructions and finishing the surfaces to match with existing finish complete all as specified and as directed by Engr-in-Charge.

M&L for repair of cracks in brick/stone masonry wall of any thickness by cutting the defect portion and providing cast in situ RCC runners in M-20 grade concrete (20mm graded aggregate) with 6mm dia bars embedded and packing entire section with cement mortar 1:4 by guniting process with proper arrangements complete all as specified and as directed by Engr-in-Charge.

S & F mild steel Deformed twisted bars 6 to 8mm dia as in reinforcement , cut to length bent to shape required cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engr-in-Charge.

S & F 32mm outer dia, three layer PP-R polypropylene random copolymer concealed pipes SDR- 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors including taking down of old steel tubing complete all as specified and directed by Engr-in-Charge. Make : Prince/Finolex/Supreme

S & F 25mm outer dia, three layer PP-R polypropylene random copolymer concealed pipes SDR- 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors including taking down of old steel tubing complete all as specified and directed by Engr-in-Charge. Make : Prince/Finolex/Supreme

S & F 20mm outer dia, three layer PP-R polypropylene random copolymer concealed pipes SDR- 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors including taking down of old steel tubing complete all as specified and directed by Engr-in-Charge. Make : Prince/Finolex/Supreme

S & F PVC Rotational moulded polyethylene water storage tank ISI marked Double layered (Cylindrical Vertical with closed top) of 500 litre capacity including tank nipple, bends, sockets, couplet all fitting required at site incl taking down old PVC storage tank complete all as specified and all as directed by Engr-in-Charge. Make : Prince/Finolex/Supreme

ABABEEL CONSTRUCTION

M/s. JAY JYOTIRLING CONSTRUCTION CO

RAJU ENTERPRISES