Providing Road Safety Enhancement Works Including Road Markings, Reflective Studs, Traffic Signage, and Speed Breakers on Coal Transportation Road via Khadgaon to Bhatgaon CHP under Jagannathpur Sub Area of Bhatgaon Area.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface.Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Road Markers/Road Stud with Lense Reflector Providing and fixing of road stud 100x 100 mm, die-cast in Reflective markers made from plastic , resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67:2012 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide IRC: 67:2012 Clause 6.7.3.2 and Clause 801.3.3 of MoRT&H, fixed over Aluminum Composite Material (ACM) sheet with thermoplastic core of Low Density Polyethylene (LDPE) between two thick aluminum skins/sheets having overall thickness of 4 mm and aluminum skin thickness of 0.3 mm on both sides.The ACM shall conform to Table 6.1 of IRC:67:2012 and Table 800-1 of MoRT&H Specification. The High Intensity Micro Prismatic Grade Sheeting shall conform to Table 6.6 of IRC:67:2012 and Table 800-3 of MoRT&H Specification.The message legend, numerical letters and borders shall be screen printed on high intensity micro prismatic sheeting conforming to Clause 801.3.7 with digital printing ink, or by cut-out from transparent durable overlay, or cut-out from the same type of reflecting sheeting for cautionary/mandatory signs.The sign board shall be supported on MS sign post of size 75 mm × 75 mm × 6 mm and 3.60 m overall length, fixed to ground by properly designed foundation of size 450 mm × 450 mm × 600 mm with M20 grade concrete.The ACM sheet shall be fixed to the post with minimum four number breakaway bolts and supported with back support frame of 25 mm × 25 mm × 3 mm angle.A 10-year warranty for retro reflective sheeting shall be provided from the original sheeting manufacturer as per Clause 6.9 of IRC:67:2012. A certified copy for three years outdoor exposure report from an independent test laboratory as per Clause 6.7 of IRC:67:2012 for the product offered shall be submitted by the contractor. .Aluminium sheeting fixed with encapsulated lens type reflective sheeting of size including lettering and signs as applicable Note: Manufacturer name and date of manufacture shall be printed (embossed) at the backside of the board i) 60 cm x 45 cm rectangular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67:2012 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide IRC: 67:2012 Clause 6.7.3.2 and Clause 801.3.3 of MoRT&H, fixed over Aluminum Composite Material (ACM) sheet with thermoplastic core of Low Density Polyethylene (LDPE) between two thick aluminum skins/sheets having overall thickness of 4 mm and aluminum skin thickness of 0.3 mm on both sides.The ACM shall conform to Table 6.1 of IRC:67:2012 and Table 800-1 of MoRT&H Specification. The High Intensity Micro Prismatic Grade Sheeting shall conform to Table 6.6 of IRC:67:2012 and Table 800-3 of MoRT&H Specification.The message legend, numerical letters and borders shall be screen printed on high intensity micro prismatic sheeting conforming to Clause 801.3.7 with digital printing ink, or by cut-out from transparent durable overlay, or cut-out from the same type of reflecting sheeting for cautionary/mandatory signs.The sign board shall be supported on MS sign post of size 75 mm × 75 mm × 6 mm and 3.60 m overall length, fixed to ground by properly designed foundation of size 450 mm × 450 mm × 600 mm with M20 grade concrete.The ACM sheet shall be fixed to the post with minimum four number breakaway bolts and supported with back support frame of 25 mm × 25 mm × 3 mm angle.A 10-year warranty for retro reflective sheeting shall be provided from the original sheeting manufacturer as per Clause 6.9 of IRC:67:2012. A certified copy for three years outdoor exposure report from an independent test laboratory as per Clause 6.7 of IRC:67:2012 for the product offered shall be submitted by the contractor. .Aluminium sheeting fixed with encapsulated lens type reflective sheeting of size including lettering and signs as applicable Note: Manufacturer name and date of manufacture shall be printed (embossed) at the backside of the board ii) 90 cm equilateral triangle

Road Delineators Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming toIRC-79 and the drawings.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - all work upto plinth level. 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size) .

Reinforcement for RCC work including straightening, cutting bending, placing in position and binding all complete. Cold twisted bars.

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.