NIT NO.23(M-3)ITEM NO.6

PART-A (Pump Set) Supply of 10 HP Submersible Pump Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained bronze impeller complete in C.I Body. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on 3-ɸ, 415V, 50Hz, AC supply, with spare pump set to serve as ready replacement. Discharge: 450 LPM, Head: 70 mtr, Stage - 10.Delivery size:50 mm. DJB SOR 2.10.16.Make of Pump: BS/KSB/SU/As approved by DJB.

Making and Supply of wall mounted (heavy Duty 4 Nos L type Hooks ) Cubical Panel for Incomer Power supply suitable for wall mounting of size 500 X 300 X 250 mm (minimum) made out of 16 SWG CRCA sheet, Indoor type, duly painted with powder coating, complete with following switchgears and instruments duly installed with their complete connections and inter connections with copper cables etc. as per requirement and with cable connectors for making required power supply connections by fixing the 4 pole 63 amp ELCB – 1 No., 3 No’s indicating LED , 100 amp panel mounting change over switch Make of insertions - L&T/BCH/ Schneider/DJB Approved

Supply of four core PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 of 10 sq mm. Make: Havells / Fort Gloster/ Grandley / ICL / CCI/ICC/UniversalNote: No other make will be accepted

Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 6.0 sq mm.Make: Havells / Fort Gloster/ Grandley / ICL / CCI/ICC/UniversalNote: No other make will be accepted

S/o rubber mat for electrical purpose of size 1 mX2mX19mm thick. Make:-Jyoti/National or any make approved by DJB DJB SOR E&M 2022 item code 22.2.4

S/o 45 Watt New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. DJB SOR E&M 2022 Item Code 19.10.6 Make: - Havells / Orient / Bajaj / Phillips / CG any other approved by DJB.

S/o 20 Watt 6000K Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. Lamp Type Order. DJB SOR E&M 2022 Item Code 19.1.2 Make: - Havells / Orient / Bajaj / Phillips / CG any other approved by DJB.

S/o Electronic Dosing pump ,Model No. UC-11,Flow rate – 4 LPH,Pressure – 5.5 KG/CM^2,MOC – PP,Make – Milton Ro. Make:- Clomax/Milton roy or any other make approved by DJB

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. DJB SOR E&M 2022 Item Code 35.1.2

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed teel conduit,with piano types witch,phenol claminated sheet,suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A DJB SOR E&M 2022 Item code 31.1.1

PART-C (Mechanical)Supply-Of G.I. Pipe 50 mm dia, Medium-class, each of 3'' Meters Long, duly threaded on both-ends, welded & fitted with G.I./ M.S. Flange of both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange.Make of Pipe: Jindal / TATA.

Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 50 mm dia. Make of Pipe: Jindal / TATA.

Supply-Of Orifice-Assembly 50 mm dia, 0.6 Meter Long, Double-Flange. One side M .S. Flange and other side G.I flange.Make of Pipe: Jindal / TATA

Supply of CI DF Non Rising spindle sluice valve PN 1.0 / IS:14846 CI body / wedge /bronze ring/SS/l410 Shaft construction of size: - 50 mm. DJB SOR E&M 2022 item Code 4.7.2 Make: Kirloslar/IVC/DJB Approved

Supply-Of C.I. D/F swing-type Non-Return Valve, as per 1S:5312 (Part 1 & 2) PN 1.0, 1S:14846, C.I. Body door.bronze to rubber ring of size: 50 mm dia.DJB SOR E&M 2022 item Code 4.9.2 Make: Kirloskar /IVC/DJB Approved

Supply-Of Rubber-packing 50% Neoprene sheet(1.5mm to 25mm) as asitable for 50mm dia Flange.DJB SOR E&M Item Code 22.6.1

Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12 mm thick, 50 mm wide M.S.Plate for holding the Pipe of 50 mm dia.

Supply-Of G.I. Bend 90⁰ x 50 mm dia, having Flange at both-ends One side M .S. Flange and other side G.I flange.

S/o 6 mm PVC coated size steel wire rope for holding the pump.Make:Usha/ISI

Supply-Of suitable size Nut-Bolts of different size i.e. 1.5” & 2.5” Long, threaded of good quality.

Supply-Of Bore-Cover Plate of Size: suitable for 300 mm Casing made out from 4 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of holding 50 mm dia pipe in center with Locking arrangement by Nuts & Bolts.

Installation,Testing and Commissioning Charges.

Gupta Brothers