Provn of chainlik fencing entry exit gate at AFS Miniature range garbage chute for certain SMQs and certain br em works at AFS sulur

Amount

SCHEDULE 'A'

M & L for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing excavated soil outside MD land complete all as specified and as directed

M & L for PCC 1:4:8, Type D-2 using 40mm graded aggregate in foundations, filling and mass concrete etc complete all as specified and as directed

M & L for Cement Concrete 1:3:6, Type C-2 using 40mm graded aggregate in foundations, filling and mass concrete etc complete all as specified and as directed

S&F M S angle & flats iron (Posts and struts) in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

M & L MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-290 Gde E-165 complete all as specified and as directed

Supply only Chain link MS galvanisd fencing, line wires of 4mm dia and 50x50mm mesh size and shall confirming to IS2712-2003 and having zinc coating of type heavy as laid down in IS 4826 including binding wire etc fixed to any type of posts/struts complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed

S & F 10mm dia round bars, cut to length, stitches through chain link fencing between posts and welded to fencing posts and MS flat iron etc complete all as specified and as directed

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and as directed

M&L for galvanised steel punched type concertina coil 600mm dia (dia of coil with unstreched) and streched for a length of 6m per coil while fixing and fixed to angle iron with 3.15mm dia GI wire, complete all as specified and as directed by Engineer-in-Charge.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long diameter of neck 5 to 10mm complete all as specified and as directed

M&L for two coats of synthetic enamel painting on steel surfaces of previously untreated over a coat of red oxide primer complete all as specified and as directed

M & L for excavating over areas, n exc 1.5 m deep and getting out soft/loose soil and removing excavated soil outside MD land complete all as specified and as directed

M & L Hardcore (broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed

M&L 100mm thick PCC 1:4:8 type D2 (using 40mm aggregate) and making surface even and fair without using extra cement complete all as specified and as directed

M&L Brick work with old size flyash bricks, straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed

M & L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; gates, hand made sliding bolts and similar work, conforming to Fe.290.Gde-E-165 complete all as specified and as directed

S &F Bands, straps, supports or stays for rainwater, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; clamps; hold fasts; and similar small articles conforming to Fe-290 Gde-E-165

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed

M & L rendering 15 mm thick on fair face or other than fair face of brick or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L applying two coats of cement based paint over a coat of alkali resistant primer including preparation of new plastered wall surface complete all as specified and directed

S & F stainless steel tubes pipe of dia 450mm (internal) of grade 304, 2mm thickness for garbage chute including jointing, wleding etc. upto height of 12.50m complete all as specified and as directed.

M & L for Cutting openings, through brick walls built in cement motor for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50mcomplete all as specified and as directed.

S & F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L Forming jambs in cement mortar 1:4 or cement lime mortar 1:2:9 etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.

Brickwork with fly ash’ bricks using with modular bricks, straight or curved on plan exc 6m mean radius built in cm 1:4 , complete all as specified and as directed

M&L PCC (1:2:4) Type B1 (using 20 mm graded stone aggregate) as in coping of including necessary form work finished fair and even surface without using extra cement including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L 100 mm thick Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate ) as in sub base , fillng and mass concrete or as in receiving tiles/ surface channels and drains etc complete all as specified and directed.

M&L Glazed ceramic coloured tiles 450 x 300 mm x 7/8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as dado including 10mm thick 1:3 backing coat including taking down existing tile and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size exc 0.11 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as directed.

M&L Preparation of new or previously untreated steel surfaces n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of of red oxide primer complete all as specified and as directed.

M&L 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall incuding taking down existing complete all as specified and as directed.

S&F PVC (SWR) 75mm bore junction single (single T) equal or unequal provided with access door including taking down existing one complete all as specified and as directed by Engineer-in-Charge

S&F PVC (SWR) branch piece single (single Y) 75mm bore equal or unequal provided with access door including taking down existing one complete all as specified and as directed by Engineer-in-Charge

S&F PVC bends 75mm bore including taking down existing one complete all as specified and as directed by Engineer-in-Charge

M&L 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall incuding taking down existing complete all as specified and as directed.

M&L PVC bends 110mm bore including taking down existing one complete all as specified and as directed.

M&L PVC (SWR) 110mm junction (single T) equal or unequal provided with access door including taking down existing one complete all as specified and as directed.

M & L PVC (SWR) floor trap of 75mm outlet dia , plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F 4mm thick sheet glass ground or obscured or frosted, on one sideand glazed with oil putty or fixed with fillets 2nd class hard wood/ steel/ aluminium of sectional area glass not exc 0.5 sqm each pane complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block wity grey cement and pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M& L for 50mm thick graded coarse aggregate of 12.5mm size complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate for packing the sides of paver block all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard /dense soil

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed

Pre-cast cement concrete block masonry with solid blocks, exc. 10cm in width and setting in mortar1:4 type C1 1:3:6 ( 20mm graded agregate ) ,complete

M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing in cement mortar 1:4 and rendering is to be finished even and smooth (without using extra lime or cement)

M&L Chequered cement concrete tiles 30cmx30cmx25mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using gray cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4)

M&L for 75 mm thick plinth protection in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed.

S&F mild steel TMT bars of Grade Fe–500 of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified.

M&L Providing precast cement concrete (PCC 1:2:4 type B-1) using 20mm graded stone aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F Framed brackets of angles or tees with web and flanges cutshape, drilled and countersunkfor screw, including bending and welding angles, as necessary,gusset plates, riveting, etc.. n exc10 kg each brackets, conformingto Fe.290.Gde-E-16(Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted , bolted or welded attachment.(Fe 410 -W (Gde- E-250) quality - B complete steel all as specified

M&L Reinforced Cement Concrete 1:2:4, Type B1 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed.

M&L M S angle iron Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 , complete all as specified and as directed.

M&L Galvanised steel punched type concertina coil 1050mm dia (dia of coil with unstreched) and streched for a length of 6m per coil while fixing and fixed to angle iron with 3.15mm dia GI wire, i complete all as specified and as directed by Engineer-in-Charge.

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Bullnosed chequered cement concrete tiles 30cm x 30cm x 25mm thick machine pressed set jointed and pointed in neat cement slurry as in treads and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor fnishes in cement mortar (1:4) complete all as specified and as directed by Engineer-in Charge. Note :- The manufacturer's test certificate and individual test certificate of tiles must be submitted for approval by the concered authority prior to installation

Chequered cement concrete tiles machine pressed set jointed and pointed in neat cement slurry on vertical surfaces as in skirting, dados and risers of steps and cut and polished using grey cement and pigments over backing coat of mortar 10mm thick for laying floor fnishes in cement mortar (1:3) including taking down existing tiles complete all as specified and as directed by Engineer-in Charge. Note :- The manufacturer's test certificate and individual test certificate of tiles must be submitted for approval by the concered authority prior to installation

M&L 20 mm thick Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platformsand like in cementmortar (1:4) including pointingin white cement (1:2) usingmarble dust with admixtureof pigment to matchwith shade of granite.

S&F Aluminium powder coated of three track sliding window outer frame top & sides (section no-20831) of size 92.0x31.75x1.5mm weighing 1.06 Kg/m, frame bottom (Section No 20832) of size 92.0x31.75x1.5mm weighing 1.248Kg/m , shutter to plain vertical (Section No 21093) of size 39x18x1.5mm weighing 0.634 Kg/m, shutter interlock vertical frame (section 21094) of size 39x18x1.55 weighing 0.734 Kg/m, shutter bottom horizontal frame (Section No 20551) size 40x20x1.5mm weighing 0.484 Kg/m, with powder coating of min thickness 50 micron , sliding type with out sash bars, 4mm thickness colour glass, rubber packing, snap beading screws with stainless steel wire mesh, complete all as specified and as directed.

Supply and fix Water heater storage type, vertical, electric single phase 240 V, 2 KW heating element, Capacity 25 ltrs, BEE 5 star rated including hot and cold flexible hose, ELCB/PRCD and Safety Valve (MFV) all as specified and directed. Make- Havells, Model No. Bianca Cat part No. GHWCBNTWH025 or Equvalent Haier Spa / Jaguar alaxa

Supply and fixing in existing DB, single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity conforming to IS 8828 of 1996 all as specified

Sub main wiring for circuit complete with 2 X 4 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable size PVC Casing capping and accessories complete fixed surface to wall/roof/ceiling etc and incl 1 X 4 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc and all as specified:

S&F metal clad socket single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps

Supply and fixing Stop valve, cast copper alloy, screwed down, high pressure fancy type, chromium plated screwed both ends for union and fixed for size 20mm bore pipe complete all specified and directed.

Supply and fixing Pillar taps, 20 mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure fancy type, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, fancy type screwed for iron pipe and fixed complete all specified and directed.

M & L for Making connection of PP-R distribution branch with PP-R main of 16 to 40 mm outer dia of pipes by providing and fixing tee including cutting and making fusion joint etc

Supply and fixing 3 layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN-16) UV stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls/ceilings or floors of 25 mm (outer dia) pipe.

Supply and fixing Angle iron stand of size 40x 6 mm for Sintex Tank Including Fabrication welding Complete all as directed

Supply and fix of high power LED street light fittings energy saving luminaire with lens , capacity 100 watt with system efficacy (lm/w) shall be 100 lumen per watt or more lumens per watt, total system lumen not less than 3600 lumens, PF not less than 0.95, CRI not less than 70, colour temp. 5000K to 6500 K, surge protection not less than 5 KV, high pressure die cast aluminium alloy LM6 housing IP-65/66 class 1 protection, toughened glass cover, driver efficiency > 85% with constant output of current and voltage against input voltage variation 120 to 270 volt at 50 Hz ( + 5%), THD< 10% complete all as specified.

Supply and fixing of IP 66 Polycarbonate weather proof Pole Junction Box, Dim:- 255L x 205B x 112D MM with plain walls for cable entries to be drilled individually, system voltage : 415V, 50hz, The plain side walls on the four sides can be drilled and customized for cable entries from any direction. Lid fasteners shall not have screws but shall be with quarter turn locking knobs – which is well visible ( open – locked), and they will be sealable without any accessories. Cable terminal :- 25 Sq mm- 4 no with 10A SP MCB- 1 no, 6sq mm disconnected terminal- 1 no, The junction box shall fulfill the following standards. Weatherproof : UV resistant due to solar radiation, Rainwater proof, temperature resistant.Salt water proof & shall be suitable for off-shore applications. IEC 60670-22 : Particular requirements for connecting boxes and enclosures. IEC 60695 – 2 – 11 : Flame – retardant & Self-extinguishing. Glow Wire tested at minimum 960 deg C. IEC 60529 : IP 66 / IP 67 / IP 69 degree of protection.

Supply and fix Sub main wiring for Pole junction box to street light fitting and bell point watch tower to guard rest room complete with 2 X 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable size non metalic PVC conduit and accessories complete fixed surface to wall/roof/ceiling etc and incl 1 X 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc and all as specified.

Supply and fix GI tubing 40/50 mm bore light grade 1.2 mtr long bent to shape as required with clamps for fixing of street light on poles/ walls including nuts, bolts, washers clamps of suitable sizecomplete all as specified and as directed.

M & L for Riddling Sand obtained from excavation for cable protection 8cm under the cable and 15cm above the cable in trench and get the thick layer of 18cm after ramming. Note :-The rate is deemed to be included for in case sufficient sand not obtained from excavation, the required additional qty obtain from out side land as directed by the Engineer-in-Charge

M & L for Protection to cable with one layer of Fly ash bricks of size 23 x 10 x 10 cm laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable.

Supply and lay LT XLPE insulated,screened ,PVC Bedded, galvanised steel strip of wire armoured, electric power cable heavy duty with aluminium condutor, multi strand, 1100Volts grade cross sectional area 16 Sqmm 4 core laid in trenches /ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets etc all as specified and directed.

Supply, transporting to site, errecting and fixing in position, steel tubular swaged poles of 9 mtr long type 410 SP- 31 IS-2713 marked complete with CI/ MS base plate, finial taper plug, bolts, nuts, washers and screws as specified, drilling of necessary holes including painting with two coats of aluminium paint over a coat of red oxide primer on exposed surface and black bituminous paint on steel surface embeded in conrete externally and throughout internally and painting 03 nos of band /strips with fluorescent , PO box red synthetic enamel paint (30 cm wide each) at a distance of 30 cm from plinth block and number of poles etc all as specified & directed by Engineer-in-Charge.

Supply and fix cross arm using standard mild steel sections like angle iron / MS pipe / flat iron / nut bolt and washers etc using steel of Fe 410-W (Gde E-250) quality - A including necessary welding suitable to fixing of flood lights on pole complete all as specified and directed by Engr in charge.

M&L PCC 1:2:4 ,Type B-1, using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Supply and fix Synchronising electronic timer unit operated on AC 230 Volts, 24 hrs clock time for controling street lights/ flood lights etc all as directed. Cat Part No : 4126 41 of Legrand or equivalent in L&T, ABB.

Supply and fix Power contactors 63 Amps, 4 pole, 415V etc all as directed . Make : Cat No 4125 57 of Legrand or equivalent of L&T/ Siemans

Supply and lay GI pipe 40 mm bore light grade for cable protection complete all as specified and as dierced by Engr-in-Charge.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr in charge.

Total of Schedule 'A'

jk construction

S.RAMACHANDRAN

KUMAR AGENCIES

A.GOVINDARAJ

Vishnu Infrastructures

sree karthika fabs

K S MUTHU CONSTRUCTTIONS

KRISHNA ENTERPRISES

p.chinnasamy

Joy builders

M/s.Sai Agency

Lucky Enterprises