REPAIR/REPLACEMENT OF OUTDOOR SECURITY LIGHTS, GARDEN LIGHTS, UNSERVICEABLE CABLES AND CONNECTED ITEMS UNDER GE(W) COLABA, MUMBAI

Amount

Taking down old unsereviceable XLPE underground cable of any size from pole wall/roof/trenches all as specified and directed.

Taking down old broken unserviceable, damaged/rusted swaged steel tublar poles of any size and remove from site all as specified and directed.

Taking down old unserviceable burnt cable 1.5 sqmm to 6 sqmm size all as specified and directed.

Taking down old unserviceable building security light/ street light/ flood light fitting of any type and any capacity and remove from its location all as specified and directed.

Taking down old unserviceable post top lantern, decorative outdoor fitting of any capacity and any type and remove from its location all as specified and directed.

Taking down old unserviceable looping box alongwith clamps nuts and bolts and remove from its location all as specified and directed.

Taking down old unserviceable rusted GI pipe light grade of 50mm/40mm/25 mm bore and remove from its location all as specified and directed. Make : Havells / polycab /finolex

Supply and lay cable insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 1.5 Sqmm X 3 core for connecting up to post top lantern, garden light and looping box all as specified and directed . Make : Havells / polycab /finolex

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 4 sq. mm X 2 Core in service connections all as specified and as directed. Make : Finolex/KEI/RR Kable

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 6 sq. mm X 2 Core in service connections all as specified and as directed. Make : Finolex/KEI/RR Kable

S&F rigid non-metallic PVC conduit inclusive of tees, bends, elbows, reducers, bell, mouth tube ends and fixing accessories such as couplers, lock nuts saddles, laid in trenches of size 25mm dia bore all as specified and directed Make : Precision/ polycab /Presfit/astral

S&F looping box made out from fibre of size 300X200X112mm, out door type weather proof with locking arrangement & comprising of three phase connector and MCB SPN 10 Amp, with suitable bus bar arrangements and fix on pole with and including suitable size MS clamps, MS flat iron, cable glands, nut bolts, washers all as specified and directed. Make : Sintex / Hensel / Havells

S&F looping box made out from fibre of size 175X150X100mm, out door type weather proof with locking arrangement & comprising of connector MCB SPN 6 Amp and fix on pole with and including suitable size clamps, MS flat iron, cable glands, nut bolts, washers all as specified and directed. Make : Sintex / Hensel / Havells

M&L GI tubing 50 mm dia light grade galvanised for cable protection and fixing of post top lantern with all connecting items (like suitable size of clamps, angle, nut & bolts) for holding of pipe with pole all as specified and directed. Make : Tata /jindal/swastik/prakash surya

S&F Steel tubular swaged poles type 410 SP-31 (9.00 metres long) with cast iron base plate, finial taper plug, bolts, nuts, screws and top cover, including braket of suitable size for fixing of street light all as specified and directed including the following:- (a) Excavation & earth work, will be measured and paid separatly under relevent items. (b) M&L for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block/concrete collar with two coat of aluminium paint over a coat of red oxide primer, preparation of surface including painting of 30cm wide blue bands 3 Nos with synthetic enamel paint in alternate layer upto the height of 1.5m above plinth block. (c) M&L for writing letter or figures (Block, Roman, Italic as Indian) with thick synthetic enamel paint of approved shade not exc height in numbering of pole all as directed. (d) Drilling 02 Nos of holes to LT Pole (one hole near street light bracket and another near bus bar at bottom side) for insert of cable for street light. Make : National / RIDDHI/Bajaj

S&F decorative pole antiquely designed aesthetically appealing landscape cum street light made out from GI housing pole type (3.0 metres long) along with single arm hanging bracket of suitable size made out from ERW pipe with base plate, finial taper plug, bolts, nuts, screws and top cover, suitable for fixing one Nos hanging light and testing all as specified and directed. Make : HAVELLS/NATIONAL/RIDDHI

Supply, installation, testing and commissioning of heritage aesthetic look (RAL Color Code 9007) post top luminaire (including light pole and lights as per description) having symmetrical distribution beam angle of 120°X120° (±5%) with housing material of Die-cast aluminum, powder-coated finish, PC cover; system wattage not exceeding 33W and system lumen output of not less than 3900 lumens with efficacy not less than 118 lumens/W. CCT of 3000K and CRI>=70 with SDCM<5. Weight not more than 8.5 kgs. Fixture shall operate in a temperature range of 0°C to 50°C . Fixture shall have input voltage for 100 – 277 VAC, 50/60 Hz. Lifetime should be at least 50,000 burning hours at L70 at 40 degree centigrade ambient. Fixture shall equipped with total IP65 protection and mechanical impact of minimum IK08. The fixture should be capable of surge protection upto 20kV minimum with salt spray test of 50hr. Luminaire driver should be EMI/EMC Compliant Luminaire dia must be minimum 460mm. LM79 and LM80 reports must be submitted along with the bid. Luminaire and driver should be of same make. Luminaire ies file (photometry file) must also be submitted along with the bid. Similar to PHILIPS BSS461 LED40WW 110-277V UNICLASSIC should include Decorative poles with base plate and all associated items made out of MS pipe (finished with P.U. painted shade) of 301 Cm height and window at the bottom for space for MCB and terminal block for fixing LED post top integral mounted decorative LED light post suitable for 40/25/20 mm dia GI bend to desired shape as directed by Engineer-in-Charge. Similar to GUANA Poles NOTE :- Excavation & PCC will be measured and paid seperately.

S&F octagonal pole antiquely designed aesthetically appealing landscape cum street light made out from hot deep galvanised (7.00 metres long) along with single arm bracket of suitable size made out from galvenised pipe complete with base plate having holes for mounting on foundation finial taper plug, bolts, nuts, screws and top cover, suitable for fixing street light and testing all as specified and directed. Make : BAJAJ/NATIONAL/CROMPTON

M&L PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) for making foundation of poles all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) for making coping of Street light poles all as specified and directed.

S&F LED Hanging light Aluminium housing polymer defuser and pleasant lumin output IP -65 of capacity 40 watt LED 0f 6000k/3000k as per requirment on site including neccesary brakets made out from GI pipe of suitable size and shape testing on ground all as specified and directed. Make : SHAKTI - SZPGCMX040/havells/bajaj/Shakti.

S&F LED Post top lantern fitting of capacity 25 watts, 100 lumen per watt capacity of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed. Make : Havells, cat part No - RUBYPT25WLED757PSYMTOPC or equivalent model in Wipro Model No LP02501-XXX-57-XX / BAJAJ- BGTN 25 W LED WW/Shakti.

S&F for LED Post top gate light fitting of capacity 50 watts, 100 lumen per watt capacity 0f 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed. Make : Havells, cat part No - JUPITERMAXIPT50WLED757PSYMTOPC equivalent model in Wipro Model No LP02501-XXX-57-XX / Philips /BAJAJ -BGCL 40 W LED WH./Shakti.

S&F LED Post top lantern haritage light fitting of capacity 20 watts, 100 lumen per watt IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed. Make : Havells, cat part No - LPTH-20-WW equivalent model in Wipro Model No LP02501-XXX-57-XX /CROMPTON/BAJAJ /Shakti.

S&F LED BOLLARD light fitting of capacity 9 watts, 100 lumen per watt IP 65 0f 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed. Make : Havells, cat part No - LPTH-20-WW equivalent model in Wipro Model No LP02501-XXX-57-XX /BAJAJ-BGBOS 600 9W LED WW /Shakti.

S&F LED energy saving decorative spike light fitting of capacity 9 watts, IP 65 0f 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed. Make : Havells, cat part No - LYCUSLLNWLED730PSYMTOTG or equivalent model in Wipro Model /JAGUQR/BAJAJ/Shakti.

S&F 9 watt fountain light, IP-66, in warm white colour, of 6000k/3000k as per requirement on site of 6000k/3000k as per requirment on site all as specified and directed. Make : Havells, cat part No - LYCUSLLNWLED730PSYMTOTG or equivalent model in Wipro Model /CROMTON/BAJAJ /Shakti.

M&L for painting external surface steel tubular poles of any type complete and cross arm/bracket etc with two coats of aluminium paint and black paints in alternate strip upto 1.50 metre (each strip of 30 cm) with super enamel synthetic paint from bottom and remaining portion shall be painted with two coats of aluminium paint of LT pole including preparation of surface and marking pole No all as specified and directed.

S&F LED street light fitting of capacity 90 watt, luminaire fixture in IP 66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 100 luman per watt after all losses, protection against biological eye safety certification and UV, and including suitable bracket MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers all as specified and directed Make : Havells, cat part No. ENDURAPEARLPLUSSL70WLED 757PASYTOPC or equivalent make of Philips Model No - BRP410LEDCW068MR PCS1PSUGR / Wipro Model No LR02-781-XXX-57-XX/Shakti. .

S&F LED flood light fitting of capacity 150 watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours at L 70, protection against biological eye safety certification and UV and including suitable bracket and fixed to pole/ wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc. of 6000k/3000k as per requirment on site all s specified and directed Make : Havells / SHAKTI / Wipro/Shakti.

S&F LED flood light fitting of capacity 100 watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours at L 70, protection against biological eye safety certification and UV and including suitable bracket and fixed to pole/ wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc. of 6000k/3000k as per requirment on site all s specified and directed Make : Havells, cat part No. JETAIRISFLS100WLED757APWBLTG/SHAKTI Cat part No :SZCFLPH100 or equivalent make / Wipro Model No LF19-931-060-57-XX/Shakti.

S&F LED flood light fitting of capacity 50 watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours at L 70, protection against biological eye safety certification and UV and including suitable bracket and fixed to pole/ wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc. of 6000k/3000k as per requirment on site all s specified and directed Make : Havells, cat part No. JETAIRISFLS100WLED757APWBLTG/SHAKTI Cat part No :SZCFLPH100 or equivalent make / Wipro Model No LF19-931-060-57-XX/Shakti.

S&F in repairs LED building security light fitting 45 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minium 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers all as directed by Engineer-in-Charge. Make Philips/ Havells/SHAKTI /Wipro or equivalent.

S&F in repairs LED building security light fitting 60 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minium 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers all as directed by Engineer-in-Charge. Make Philips/ Havells/SHAKTI /Wipro or equivalent.

M&L earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to 4 mm dia GI wire as earthing lead by means of blots and nuts check nuts and washers of galvanized iron and connected to main switch board including watering pipe 20mm dia medium grade with PCC chamber, MS funnel, wire gauge, CI cover with frame, 15 mm dia GI pipe light grade for protection of earth wire etc including necessary excavation in any type of strata, returning, filling removal of soil outside MD land, filling of charcoal and salt all as shown in electrical plate No. 3 of MES Sch Part I, connected to earthing test point, testing on completion all as specified and directed.

S&F in repairs LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly, IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 25 Sqmm X 4 core all as specified and directed.

S&F in repairs LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly, IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 16 Sqmm X 4 core all as specified and directed.

S&F in repairs LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly, IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 10 Sqmm X 4 core all as specified and directed.

S&F in repairs cable LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly, IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 10 Sqmm X 2 core all as specified and directed.

Labour only for taking out and checking of underground cable and relaying /rerouting the same cable of any size and any capacity including making servicable electric connections all as specified and directed.

S&F in repairs testing and commissioning of multifunction timer switch digital 24 hour three phase complete with timer, contactor, and suitable rating MCB s for incoming and out going in built in suitable sheet metal enclosure panel and working in Single/Three phase integrated models of cpacity 63 Amp all as specified and directed. Make : Havells, L&T or equivalent Models of crompton/schinder as approved by GE)

M&L for cutting existing hard standing by manual method, 0.45 m width and 0.6 m in depth for inserting galvanized tubing for cable protection, refilling the same after laying of pipe, with soil, stone aggregate as obtained from excavation, making good top surface with 100mm thick PCC (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) and removal of excess material if any all as all as specified and directed. Note:- Cost of taking out of old GI pipe is deemed to be included in the quoted rate.

S&F street light BEST pattern brackets suitable 410 SP-31 pole made out of GI pipe 50mm bore light grade 1.50 metre long bend to shape including welding with cap diameter suitable to SP-31 pole to required shape and necessary nut bolt washer, including two coats of synthetic enamel paint over a coat of red-oxide primer all as directed and specified.

S&F street light brackets made out of GI pipe 40 mm bore light grade 1.50 metre long bend to shape including welding and two sets of clamps made out of MS 40mm x 5mm bent to required shape and necessary nut bolt washer, including two coats of synthetic enamel paint over a coat of red-oxide primer all as directed and specified.

Labour only for cutting small bushes of trees around two metre radious of street light fitting serviciability checking of street light fitting, for each pole of street lights all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m depth and getting out in hard/dense soil for laying of cable/ GI pipe all as specified and directed.

Returning, filling in including spreading levelling watering well ramming in layers not exceeding 25cm thick each layer all as specified and directed.

Removing surplus soil to a distance outside MD land and depositing where directed at a level not exceeding 1.5m above the starting point all in including removing balance debries from MD land all as specified and directed.

S&F or laying High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 50mm dia for laying of cable protection complete to walls/ trenches/floor/ceilings all as specified and directed by Engineer-in-Charge.

S&F/ laying High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 25mm dia for laying of cable protection complete to walls/ trenches/floor/ceilings all as specified and directed by Engineer-in-Charge.

S&F in replace of LED security light timer switch 24 Hour digital type suitable for 63 Amp 3ph all as specified and directed. Make L&T or equivalent

M&L for repairs/ Overhauling/Servicing to Existing highmast of any size including following activities (i) Tightning the loose connections, cleaning and greesing inside/out side by applying repair to broken nut bolts, motor, ropes and balancing the fittings at top of high mast after the completion of servicing up to the satisfication of Engr-in-charge complete all as specified and directed . Note : motor, rope, cables measured and paid separately under relevant items of this schedule.

S&F steel rope of size 10 mm dia in repairs including all fittings like dog clamps and fixed complete to high mast for the purpose of vertical movement of brackets all as specified and directed.

S&F multi stranded FR Copper conductor cable of size 4 Sqmm 6 Core for flood light fittings and connecting up all as specified and directed.

Supply, installation testing and commissioning in repairs for Electric Induction Motor AC of capacity 0.55 KW / 0.75 HP, 3 Phase, type 2HCI Copper wound 870 RPM complete with tougle switch of suitable capacity and necessary small Winch gear, chain suitable size and tested for smooth functioning for vertical up and down movement all as specified and directed. Make : Hindustan -2HCI / equivalent model in Cromton / Havells.

S&F in repairs of LED security light contactor switch of 63Amp 3ph 4P suitable for 63 Amp 3ph timer complete all as speified and directed. Make L&T MNX63 or equivalent

S&F in repairs of LED security light MCB of 63Amp 3ph 4 p suitable for 63 Amp 3ph timer all as speified and directed. Make L&T or equivalent

S&F in repairs of LED security light driver suitable for 15 watt to 40 watt of 100 lumen per watt IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed.

S&F in repairs of LED security light driver suitable for 50 watt to 100 watt of 100 lumen per watt IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed.

S&F in repairs of LED security light driver suitable for 100 watt to 200 watt of 100 lumen per watt IP 65 of 6000k/3000k as per requirment on site including necessary fixing arrangement all as specified and directed.

N.S.ENTERPRISES

NOEL ENGINEERS

M K ENTERPRISES

Ashish Enterprises

B P ENTERPRISES

GANGAJAL

S S ENTERPRISES

AGRAWAL ASSOCIATES

SHRI SAI ENTERPRISES

Bidder Name

AGRAWAL ASSOCIATES

S S ENTERPRISES

Ashish Enterprises

SHRI SAI ENTERPRISES

NOEL ENGINEERS

Panther Facilities

GANGAJAL

B P ENTERPRISES

M K ENTERPRISES

N.S.ENTERPRISES