SPECIAL REPAIR TO BLDG NO P1 NURSING OFFRS MESS AT MH IN AGE BR II UNDER GE DANAPUR CANTT

Amount

Taking down cement plaster on wall/ceiling etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and as directed.

~Ditto~ all as per item No. 3.00 above but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and as directed.

Dismantling of floor, walls tiles including bedding but backing and rubbish off permises complete all as specified and as directed.

Demolition of reinforcenemt cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement) complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed. Note : Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match the tile over and including 15 mm thick screed bed in cement mortaer 1:4 complete all as specified and as directed.

M&L for glazed ceramics coloured Digital pattern tiles of size 350x250x7mm or 450x350x7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and as directed.

M & L 25 mm thick cement concrete type B1 1:2:4 (20 mm graded aggregate) in Sub Floors coping surface channels etc complete all as specified and as directed.

M&l PCC 1:4:8 type D-2 (40mm graded agg) in foundn filling and mass concrete complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection finishing even & smooth without using extra cement laid in bays with construction complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc complete all as specified and as directed.

M&L for providing pre-cast cement concrete of RCC 1:2:4 type B-1 (using 20mm graded stone Agg)for landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to matchthe shade set in CM 1:4 complete all as specified and as directed.

S & F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of wooden/Aluminium door, window, ventilator and making good dismantled portion in cement mortar 1:3 exceeding 1/2 brick but not exceeding one brick complete all as specified and as directed.

S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete.

S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F powder coated anodised aluminium frame / choukhat for door window and ventilator with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws etc complete all as specified and as directed.

S & F factory made 35 mm thick (Batten thickness) plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. Make approved by GE.

S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S&F small fitings of 2nd class hard wood such as brackets of any type, latch and hing block shape door, window stops and the like incl all necessary labours articles not exc 200 cucm each complete all as specified and as directed.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.

M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia complete all as specified and as directed.

S&F 15mm dia tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M&L for refixing of old steeel tubing 15mm size and connections in new or old position with all fittings to floors , wall or ceiling complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia complete all as specified and as directed.

S&F 20mm dia tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S& F chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and as directed.

S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified and as directed.

S&F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and as directed.

S&F vitreous china WHB size 550x400 mm white flat back excluding taps, waste, chain & plug & porcelain stopper but including brackets complete all as specified and as directed.

S&F cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete all as specified and as directed. Make - Prayag or equivalent make as approved.

S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. ccomplete all as specified and as directed.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and as directed. Make : Hindustan/Parryware

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed.

S&F in repair fancy type bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : Prayag/Parryware/Cera

S&F 15 mm bore pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for irn pipe & fixed complete all as specified and as directed.

S&F CP brass tubular tower rail 20 mm dia D type 60 cm long between flanges complete all as specified and as directed.

S&F angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and as directed.

S&F in repair CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in replacement of stainless steel soap dish, of standard size and shape complete all as specified and as directed. Make : Parryware/Hindware/Jaquar

M&L for applying two coats of oil bound distemper over a coat of primer over and including preparing the surfaces using Birla / JK Putty @ 2 Kg / sqm, including removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of Oil Bound Distemper of any light shade complete all as specified and directed.

~Ditto~ all as per item No. 58.00 above but on ceiling complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and as directed.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and as directed.

S&F in repair 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed.

S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. Make Parryware(Superfine), Cera (Ist Quality), Jaquar

M&L for RCC as in kitchen platform, shelves type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified and as directed.

M&L for 18 mm thick granite slab (of any type) work (table rubbed and polished) in in steps, floors, jambs, pillar, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M&L for form work to sides and soffits of floor or roof beam lintels, cantilevers, shelves including supports etc complete all as specified and as directed.

S&F MS TMT bar 10 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips.

S&F in repairs PVC waste pipe for WHB and sink complete all as specified and as directed.

S&F 40 mm dia CPVC pipe SDR 11 & plain CPVC SDR complete fittings fixed to WHB and Sink with required solvent etc complete all as specified and as directed.

S&F chromium plated toilet paper holder with flap complete all as specified and directed. Make : Parrywar/Prayag or Equivalent make

S&F chromium plated corner glass shelf with brackets complete all as specified & directed. Make : Parryware/Prayag/Cera or Equivalent make

S&F in repair plastic water closet seat cover, Cream / white / Black colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC. (Make-Parryware/Prayag/Hindware)

S&F Aluminium sheet 0.56mm thick fixed to bottom of the door shutter with suitable nails etc complete all as specified and as directed.

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specified and as directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating including jointing with solvent cement 75mm dia etc complete all as specified and as directed.

S&F steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and as directed.

S&F GI wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified and as directed.

Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and as directed.

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F 3 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as specified and as directed.

Supply & Fix floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floorcomplete all as specified and as directed.

M&L in repair for 18/19 mm thick block board, grade 2 interior grade, decorative type with decorative face veneer on one face fixed etc complete all as specified and as directed.

S&F in repair decorative choise plywood, grade 18/19mm thick (with BWR resin) with decorative on both faces; fixed with screws to timber frame work complete all as specified and as directed.

S&F in repairs continuous (Piano) hinges 40 mm width of flaps, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F in repair 40 mm dia cup board knobs, fixed with nut, screw and washer of mild steel bright finish complete all as specified and directed.

S&F of ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed.

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and as directed.

S&F in repair 2 liver brass cupboard lock grade-I size 65 mm etc complete all as specified and directed.

S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and as directed. Make : Prince, Finolex

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Make : Prince, Finolex

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and as directed.

M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed.

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and as directed. Make : Prince, Finolex

Taking down aluminium doors shutters only (area exc 1.0 sqm but not exc 2.0 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified and as directed.

Taking down aluminium doors shutters only (area exc 2.0 sqm but not exc 4.0 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified & directed.

S&F in repair CP mortice door lock 4 to 6 lever suitable to dooor shutter complete all as specified and directed.

S&F SS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F in repair 5 mm thick figured sheet glass pin headed type in square exc 0.5 Sqm in each pane fixed in aluminium door shutters with necessary rubber and powder coated aluminium snap beading complete all as specified and as directed. Make : Modi Float, Saint Gobin, Atul

S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg ccomplete all as specified and as directed.

S & F powder coated aluminium door shutter with following specification:- (a) chowkhat frame of size 63.00 x 38.10 x1.22 mm @ 0.650Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667 KG/RM (c) Top and Middle rail of size 47.62 x 44.45 x 1.18 mm @ 0.667 KG/RM (d) Bottom Rail of size 114.30 x 44.45 x 1.29 mm @ 1.139 KG/RM (e) Partialy 9mm thick prelaminated particle board both side decorative (f) Partialy 5 mm thick tinted glass. (g) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass. (h) Two No.Disk Type Aluminium handle 200 mm long. (i) One No. Mortice cock and joing cleat.

M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed.

S & F powder coated aluminium window sliding shutter three track with following specification complete all as specified and as directed:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement etc

S&F Powder coated aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified & directed by Engr-in-Charge. Make : Jindal, Hindalco or equivalent.

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws etc complete all as specified and as directed.

S&F 4 mm thick figured sheet glass pin headed type in square not exc 0.5 Sqm in each pane fixed in aluminium door shutters with necessary rubber and powder coated aluminium snap beading complete all as specified and as directed. Make : Modi Float, Saint Gobin, Atul

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets complete all as specified and as directed.

M&L for cutting holes into or through brick walls built in cement mortar and wall of thickness exc half brick but n exc one brick thick wall of cement concrete for inserting of rolled mild steel structural steel work and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and as directed.

M&L for mild steel tubular pipe of medium grade (ISI marked) of any sizes cut to length, fixed to floor for post and wall for tubular trusses (framed), purlins, rafters etc complete all as specified and as directed.

S&F powder coated Gl frame work for ceiling using Main Tee and cross tee of Size 24mmx32mm having 0.27mm guage and sub cross cross tee of size 24mmx32mm having 0.25mm guage and wall angle of size 19mmx19mm having 0.35mm guage, S& F hanging wire of sutable size, The mess size will be of 600mmx600mm including supply and fixing of 12mm thick Gypsum tile of zize 600mmx600mm complete all as specified and directed.

Fixing only 12mm thick Gypsum tile of size 600mmx600mm on existing false ceiling grid complete all as specified and as directed.

M&L Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, mass concrete etc complete all as specified and as directed.

M & L PCC 1:2:4, type B1 (20mm graded aggregate) as in surface channel of drain, in coping etc complete all as specified and as directed.

Dismantling AC/CGI (corrugated, semi corrugated, etc), as in roof covering complete all as specified and as directed.

Dismantling unframed timber scantling 40 Sq.cm and over in section, in any position complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as complete all as specified and as directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etcfixed with Jor L type hook bolt complete all as specified and as directed.

S& F 6mm thick Asbestos cement twopiece adjustable plain wing ridge fixed with Jor L type hook bolt complete all as specified and as directed.

Fixing only except sheet of 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etcfixed with Jor L type hook bolt complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surfaces of walls ect complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.

M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding modular steel box/plate for mounting modular switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium /AKG.

One light / fan point controlled by one switch.

One 5 Amps socket outlet point controlled by one switch on same board with other switches.

One 5 Amps socket outlet point controlled by one switch on independent board.

~Ditto~ all as per item No. 126.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed.

S&F switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.

Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

Supply and fixing Lamp holder, insulated body with back plate suitable for batten/angular fittings complete all as specified and directed.

Supply and fixing LED Lamp 7/8 Watt complete all as specified and directed.

Supply and fixing in repair Wall light fixture lantern made up of polycarbonate; suitable for LED 9 watt ,compleate with LED 9 watt lamp, spiral B-22 base including connection with all necessary accessories complete all as specified and directed. MAKE - Havells Cat No. LHDL02160099 / Philips / Bajaj.

Supply and fixing in repair LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Havells, Cat No: REGALBATTENT8UPTO1X22WDSBSWH or equivalent model of Bajaj/Philips/Crompton.

Supply and fixing in repair LED tube rod 18 watt 230 volt T8 type made up of polycarbonate with in built electric electronic driver both sided connection with metal heat sink complete fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Havells, Cat No: CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bajaj/Philips/Crompton.

Taking down and re-fixing of serviceable / unserviceable existing electric enery meter with suitable size metal box fixed with wall and connection of electric meter through DBs proper as per directed by Engineer-in-Charge.

M&L Sub Main wiring with 2 run of 4.00 Sqmm (niminal cross-sectional area) PVC insulated (FRLS) unsheathed single core cable working voltage 1100 Volts grade with stranded copper conductor including one run of 2.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed cable with stranded copper conductor as continuous earth wire connected in common earth dolly drawn in PVC rigid non-metallic conduit complete all as specified and diercted. Make of cable : Polycab/Havell's/Finolex. Note :- (a) PVC non rigid non-metallic conduit shall be measured & paid separately under relevent item of this Schedule 'A'. (b) Two run of sub main wiring cable alongwith one run of earth wire shall be measured as one length.

M&L for 25 mm dia PVC conduit having a wall thickness not less than 1.5 mm with all accessories (including cutting chases * making good the disturbed surface to its original specification) with all accessories for sub main wiring / telephone cable / internet cable complete all as specified and directed. Make of conduit : Plaza/Prestoplast/Modi.

S&F sheet metal enclosure for 8 way distribution boards (DB's), double door, single pole and neutral with 200 Amps rated bus bar, IP-20 protection suitable for fixing MCB's/Isolators complete all as specified and directed. Make : Legrand/Schneider/Siemens.

Supply and fixing MCB SP 240 volts 5 to 40 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make : Legrand/Schneider/Siemens.

Supply and fixing with MCB SPN 5 to 32 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make: Legrand/Schneider/Siemens.

Supply and fixing in repair double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed. Make: Legrand/Schneider/Siemens.

Supply and fixing in repair MCB TPN 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make: Legrand/Schneider/Siemens.

Supply & fixing factory made Sheet metal and neutral enclosure two pin with earth plug and socket complete with one single pole MCB 240 volts, 20 amps complete all as specified and directed. Make: Legrand/Schneider/Siemens.

Supply and fixing LED street light fitting 1 x 25 Watts capacity including all accessories and lamps complete with bracket of suitable size complete with flat iron clamps two Nos fixed in the wall with grouted nut, bolts complete all as specified and directed. Make : CG/Bajaj/Havells.

Supply and fixing Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete.

Vijay Bakshi and Son

SINHA CONSTRUCTION

HARINANDAN RAI SONS