REPAIR/MAINT OF BOUNDARY WALLS INCLUDING REPLACEMENT OF CONCERTINA COIL AND FENCING REPAIRS AT 10AFH AREA, REPAIR/MAINT INCLUDING CCD PAINTING OF VARIOUS SURFACES AND OTHER BUILDINGS AND REPAIR/MAINT INCLUDING REPLACEMENT OF DAMAGED/ UNSERVICEABLE

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Demoliton of cement concrete in ground floors and pavings n. exc. 15cm thickness (below or above ground level), complete all as specified and directed.

S&F mild steel works as in posts and struds in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting and riveting etc and similar work conforming to Fe.290 Gde E-165, complete all as specified and directed

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with hexagonal or square washers and one nut exc. 30cm long & dia of neck n. exc. 12mm, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work, complete all as specified and as directed.

S&F MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F in repair for 960mm dia barb (unstretched) conseczal super razor punched tape (SRPBT) aluminium base helix coil with and including necessary GI fixing clips for securing fixed with existing angle iron 'Y' shaped with horizontal reinforced barbed wire tied with GI staples & clips, complete all as specified and directed. Note (i) : No of circles - 51 turns per coil, weight of each coil with hessian pack 13 Kg (+ 0.5), coverage per coil - 8 RM, central core wire :- Made from 2.5mm dia (+ 0.05mm) GI - H.T.S.S wire as per IS -4454 Part l grade SM UTS : 1600N / sqmm with zinc coating of 240 gm per sqm, galvanized as per IS-2629, Razor punched strip - Razor punched tape is CONSEC-ZAL steel comprising of aluminium base with zinc alloy @ 150 gm per Sgm confirming to ASTM A-792 / A-792M with additional primer treatment of epoxy / polyurethane of 2-m micron thick and final paint top coat of certified green shed (BSL 139) by hot dipping process of 15 micron thick, length of barb 23.5mm (+1 mm), width of barb 18.6 mm (+ 1mm), centre to center pitch 36mm (+ 1mm), centre width 7.4 mm (+ 1mm), GI fixing accessories "C" clip 2mm wire diameter, 40mm long, 15mm center dia "U" clip 1mm thick, 28mm straightened length, " J" clip:- 31mm length, 8mm width, 1mm thick. (ii):- Running length of the fencing shall be measured for payment purpose. (iii) Barbed wire shall be measured and paid seperately.

S & F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles and removing rubbish off the premises, complete all as specified and directed

M&L for brick work with flyash bricks, old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed.

M & L PCC (1:2:4) type B0, (using 12.5mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railings etc, complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls including cornices by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots and applying two coats of white wash including cornics, complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall/chajja including brooming down or steel wire brushing, scraping down smoke shoot etc and applying one coat of cement base paint, complete all as specified and as directed.

M&L for complete removal of existing treatment of old decorated surfaces of wall/chajja including washing rubbing down and scrapping smoke soot moulds, moss and greasing sports with steel wire brush and applying two coat of cement base paint, complete all as specified and as directed.

M&L for complete removal of existing treatment of old painted surfaces of steel or iron work and applying two coats synthetic enamel paint (1st grade quality) of any description over 10cm width or girth, complete all as specified and directed.

M&L for preparing of new steel & Iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.

M & L for complete removal of existing treatment of old decorated surface of walls and applying two coats of 100% acrylic weather proof exterior emulsion paint of approved colour and shade, complete all as specified and directed.

M & L for preparing old decorated surface of walls and applying one coat of 100% acrylic weather proof exterior emulsion paint of approved colour and shade, complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces on wall and applying three coats of white wash, complete all as specified and directed.

Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, complete all as specified and directed.

M&L 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces finished surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces finished surfaces even and smooth without using extra cement, complete all as specified and directed.

M & L for 15mm thick rendering in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.

M&L for 5mm thick rendering in CM (1:3) on ceiling and soffits of staircases, waist slab surfaces, finished even and smooth (without using extra cement), complete all as specified and directed.

M&L for preparation of newly plastered surfaces on walls and applying two coats of acrylic distemper over and including a coat of primer over and including 2 to 3mm thick wall care putty, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation newly plastered surfaces of wall and applying two coats of 100% premium acrylic smooth exterior emulsion paint alkali & fungal resistance of shade deep green/camouflage pattern over a coat of exterior emulsion primer, complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying one coat of acrylic distemper over and including a coat of primer over and including 2mm thick wall care putty, complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.

M&L for preparation old plastered surfaces of wall and applying one coat of 100% premium acrylic smooth exterior smooth emulsion paint alkali & fungal resistance of shade deep green/camouflage pattern, complete all as specified and directed.

M & L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm high with synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M & L for preparation of old painted steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLSH) size 1.5 sqmm drawn in and including PVC casing and caping (ISI marked) with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet / modular plate incl continous earth wire of PVC insulated unsheathed, (FRLSH) multi stranded copper conductor cable of size 1.5 Sqmm for earth wire connected to common earth dolly for one light/fan point/bell point controlled by one, one way switch single pole including taking down old unserviceable point wiring, complete all as specified and directed.

All as per item No 36.00 here-in before but one 3 pin 5 Amps socket outlet on same board controlled by other switch, complete all as specified and directed.

All as per item No 36.00 here-in before but one 3 pin 5 Amps socket outlet on the independent board controlled by other swtich, complete all as specified and directed.

All as per item No 36.00 here-in before one bell/buzzercontrolled by one push button, single pole, on the same board with other switches or independent, complete all as specified and directed.

All as per ser item No. 36.00 here in above but for one 16 Amp 3/5 pin switch socket outlet independent point including PVC cable 4 Sqmm FRLSH type multistranded copper stranded conductor along with 4 Sqmm continious PVC insulated unsheathed multistranded copper conductor cable FRLSH type for as earth wire, complete all as specified and directed.

S&F switch piano flush button single pole, one way 6 amps 240 volts, complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 6 Amp, flush type, complete all as specified and directed.

S&F switch and socket combination 2 in 1, 3 pin 6Amp flush type, complete all as specified and directed.

S&F switch and socket combination 3 pin, 16 Amp, flush type, complete all as specified and directed.

S&F ceiling rose, surface bakelite PVC/ polycarbonate, isolated body, three phase, complete all as specified and directed.

S & F in repair lamp holder, PVC/polycarbonate type, complete all as specified and directed.

S&F in repair stepped type electronic fan regulator, flush type, AC, 230 volts suitable for any type of ceiling fan, complete all as specified and directed.

S&F bell push, flush type, 6 Amps, complete all as specified and directed.

S&F bell electric, heavy duty, ding dong type, 240 volt, single pole, complete all as specified and directed.

Supply and draw sub main wiring in repairs of two run 4.0 Sqmm single core PVC insulated, unsheathed multistranded copper (FRLSH) conductor cable 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of not less than 25mm dia ISI marked including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 4.0 Sqmm single core PVC insulated unsheathed (FRLSH) copper earth continuity, including making good disturbed surface as per existing surface including taking down existing sub-main wiring, any numbers of wire and any size, complete all as specified and directed. Note: Two runs of single core cable with one run of earth continuity conductor including PVC conduit & accessories shall be measured and paid as one length.

M&L for sub main wiring with two run of 4 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable (FRLSH) 1100 Volt grade, drawn through and including PVC casing caping (ISI marked) including all accessories and one run of 4 Sqmm single core PVC insulated unsheathed (FRLSH) copper earth continuity conductor including taking down old unserviceable sub main wiring, complete all as specified and directed. (Note : Two runs of 4 Sqmm single core cable with one run of earth continuity conductor including PVC casing caping and its accessories shall be measured and paid as one length).

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 4 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position including taking down old unserviceable DB, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position including taking down old unserviceable DB, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Triple Pole & Neutral (TPN), suitable for 4 way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position including taking down old unserviceable DB, complete all as specified and directed.

S&F MCB Triple Pole and Neutral (TPN) of capacity 40 to 63 Amps, 415 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixed in proper position including connection and testing , complete all as specified and directed.

S&F MCB Single Pole and Neutral (SPN) of capacity 40 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixed in proper position including connection and testing , complete all as specified and directed.

S&F MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixed in proper position including connection and testing, complete all as specified and directed.

S & F wall mounted inverter LED batten light fitting 1 x 20 Watt, 4 feet long, 220V, AC with driver and backup time upto 4 hours including 20 W LED 6500K lamp, protection class not less than IP 20, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fittings, complete all as specified and directed.

S&F in replacement inverter LED bulb 12 Watt 6500K and backup time upto 4 hours, protection class not less than IP 20, insulated body, suitable for B-22 base, complete all as specified and directed.

S&F surface/recessed mounted 600mm x 600mm LED luminaire 40/42 watt, 220 V, AC, with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp including connecting up with three core flexible copper conductor cases of suitable size, complete all as specified and directed.

S&F surface/recessed mounted 1200mm x 300mm LED luminaire 40/42 watt, 220 V, AC, with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp including connecting up with three core flexible copper conductor cases of suitable size, complete all as specified and directed.

S&F recessed mounted LED panel light round type decorative fittings 18 watt, 220 V AC, including electronic driver and connecting up with three core flexible copper conductor cases of suitable size, complete all as specified and directed.

S&F recessed mounted LED panel light round type decorative fittings 15 watt, 220 V AC, including electronic driver and connecting up with three core flexible copper conductor cases of suitable size, complete all as specified and directed.

S&F recessed mounted LED wall washer COB type decorative fittings 24/25 watt, 220 V AC, including electronic driver and connecting up with three core flexible copper conductor cases of suitable size, complete all as specified and directed.

Taking down existing light fitting carefully, set aside, and re-fixing after necessary repair work, wiring etc, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in stone concrete wall / blocks / slab where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc. 10cm but n.exc. 20 cm girth, complete all as specified and directed.

S&F in repair modular switches 1 way 10 Amp, 1 module, absolute white and making good to the distrubed srfaces, complete all as specified and directed.

S&F in repair modular switches 1 way 20 Amp, 1 module, absolute white and making good to the distrubed srfaces, complete all as specified and directed.

S&F in repair modular bell push 6 Amp, 1 module, absolute white and making good to the distrubed srfaces, complete all as specified and directed.

S&F in repair modular socket 6 Amp, 2/3 pin, combined with safety shutter, 2 module, absolute white and making good to the distrubed srfaces, complete all as specified and directed.

S&F in repair modular universal socket 6 Amp/16 Amp, 2/3 pin, combined with safety shutter, 2 module, absolute white and making good to the distrubed srfaces, complete all as specified and directed.

S&F in repair modular stepped type electronic fan regulator/dimmer 120 watt, 5 step, 2 module, AC 230 volt, absolute white and making good to the distrubed surfaces, complete all as specified and directed.

S&F in repair AC motor starter switch 20 Amp, 2 module, AC, 160-240 volt ~ 50-60 Hz, white and making good to the distrubed surfaces, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 3 module, snow white and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 4 module, snow white and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 6 module, snow white and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 8 module, snow white and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed.

S&F in repair modular cover plate with inner frame 12 module, snow white and making good to the disturbed surfaces by applying wall putty around the cover plate and fixing of all accessoreis as per site requirement, complete all as specified and directed.

S&F in replacement presence/motion sensor suitable upto 36 watt LED lights 600mm x 600mm fixed in ceiling is required existing shape and size, 10 Amp capacity and connected to be in loop with existing lights, complete all as specified and directed.

Note: An amount of Rs.23,990.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

DEEP NIRMAN (BID ID -3365211)

M/S. VINITA CONSTRUCTION (BID ID -3365637)

M/S. KUMAR CONSTRUCTION CO. (BID ID -3368120)

M/S RATHIN ENTERPRISES (BID ID -3368307)

B L SHARMA (BID ID -3368128)

BHARAT ELECTRIC (BID ID -3368267)

M/S MANODEEP CONSTRUCTION (BID ID -3365499)