REPAIRS TO VARIOUS ROADS AND ROAD FURNITURE UNDER GE DSSC WELLINGTON

Amount

Material and labour for scarifying or picking graveled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm and depth exceeding 50 mm and not exceeding 100mm deep complete all as specified and as directed.

Material and labour for preparing scarified top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying tack coat @ 10 Kg per 10 Sqm using Bitumenous Cold Emulsion Rapid Setting Grade-1 (RS-1) over WBM surfaces etc complete all as specified and as directed.

Material and labour for 75mm thick (Compacted thickness) water bound macadam with coarse aggregate of grading 2 (63 to 40mm size), spread, rolled and consolidated to gradient and camber required etc complete all as specified and as directed.

Material and labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt applying tack coat @ 5 Kg per 10 Sqm using Bitumenous Cold Emulsion Rapid Setting Grade-1 (RS-1) etc complete all as specified and as directed.

Material and labour for Premix Bituminous Macadam with binder content of 4% by weight of total mix using paving bitumen of VG-30, laid rolled and compacted to required camber and gradient (Consolidated thickness 75 mm or less) with mechanical paver complete all as specified and as directed.

Material and labour for Bituminous Premix Semi Dense Asphaltic concrete 40mm consolidated thickness using paving bitumen of Grade VG-30 with 5.5% binder content by weight of total mix using hot mix plant and mechanical paver rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed.

Material and labour for repair to potholes any depth, not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm using Bitumenous Cold Emulsion Rapid setting Grade-1 (RS-1) and putting in premixed bituminous macadam using VG-30, well rammed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of hole exceeding 30mm complete all as specified and as directed.

Material and labour for Applying 2 mm thick road marking paint with reflective thermoplastic white road marking paint confirming to BS-3262 (1989), either continuous or broken lines over existing or new painting surfaces of cement or bituminous surface, laid down through road marking machine using thermo plastic material by incorporating the white glass powder for reflectivity in 100 mm width in white or golden yellow colour by using applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, including cleaning the road surface of all dirt, seals, oil grease and foreign material etc complete as direction of Engr-in-Charge and in accordance with applicable specification complete all as specified and as directed.

Supply and fix Duo-directional CAT eyes (road studs) of size 90x110x17 mm made up of weather resistant high impact polymer conforming to ASTM D4280 & having electronically welded micro prismatic lens with abrasion resistant coating & fixed with 2 Nos of polymer shanks of suitable dis & suitable adhesive conforming to IS as per procedure recommended by manufacturer and complete all as specified and as directed.

Supply and fix Poly Carbonate Convex Mirror outdoor type 1200mm/1000mm dia mounted and fixed to 80mm bore medium grade MS pipe of 1000 mm for NGL grouted with 1:2:4 of PCC 300 x 300 x 450mm PCC blocks complete all as specified and as directed.

Material and labour for precast cement concrete solid building blocks type C1 (1:3:6) using 20 mm graded stone aggregate, exceeding 10cm in width and setting in mortar 1:6 etc complete all as specified and as directed.

Demolition of brick work / precast concrete article / stone masonry built in cement mortar including removing of debris all as specified and directed.

Material and labour for 15mm thick rendering with cement mortar 1:4 on fair faces of brick/PCC Blocks or concrete surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed.

Material and labour for signage board made of 3mm thick ACP with EGP reflector sheet with printing on HP 365 Traffic edition laminated with 1170 C clear ECF sheet complete all as specified and as directed

Supply and Fixing joist, channel, angle or tee sections, post fixed independently, without connection plates, etc (cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W (gde-E-250) quality-A complete all as specified and as directed

Dismantling of Wrought iron/mild steel work of any description complete all as specified and as directed

Material and labour for plain cement concrete 1:2:4 type B2, using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed

Demolition of unreinforced cement concrete of any description and in position complete all as specified and as directed

KSR AND COMPANY

VENKATESH

Vishnu Infrastructures