CERTAIN MISCELLENEOUS REPARS TO DEF CIV MD ACCN AND OTM BUILDINGS OF AGE B/R H/L UNDER THE AOR OF GE DEOLALI

Amount

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons, walls etc complete all as specified and as as directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed.

All as per item No 02 above, but as in skirting over 10mm thick backing coat in CM (1:4).

M&L for non skid ceramic coloured tiles of size 7mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 but n exc 0.38 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per Sl item No 04 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for 8 mm thick (square/rectangular) Vitrified ceramic tiles double charged area of each tile exc 0.18 sqm not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per Sl item No 06 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size. 300x600x7mm/450x300x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick back coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M&L for non skid ceramic tiles of size 6-7mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rouber moulded with grey cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for precast cement concrete interlocking tiles 60 mm thick Rouber mould with strength M-35 N/sqmm as in floor/pavement laid dry to the profile including 30mm thick stone dust sand cushioning complete all as specified and as directed.

M&L for precast cement concrete interlocking tiles 80 mm thick Rouber mould with strength M-40 N/sqmm as in floor/pavement laid dry to the profile including 30mm thick stone dust sand cushioning complete all as specified and as directed.

M&L for non abrasive paving (Rectified Endura) cement conrete coloured tiles 300 x 300mm x 8-10mm thick machine pressed, set and jointed and pointed in neat cement slurry as in floor/skirting mixed with grey cement and pigment match the colour as in pavements, including 15mm thick scred in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for Granite 16-18 mm thick Z black superiour quality machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.

M & L for Machine cut cudappa stone slab 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Machine cut kota stone slab on steps tread/riser/window cill in single piece of any size 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 15 mm dia pipe complete all as specified .

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 20mm dia pipe complete all as specified .

S & F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

S & F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

S & F in repairs 15 mm dia CP Stop valves/angle valve, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified.

S & F in repairs 15 mm dia CP bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S & F in repairs 15 mm dia CP two way bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S & F in repairs 15 mm dia CP Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified.

S & F in repairs Vitreous China wash basin, white, flat back/bowl type, size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia CP Waste fittings, brass, chromium plated with waste pipe complete all as specified.

S & F in repairs Vitreous China wash basin, white, flat back, size 580 x 480 mm with pedestal excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia CP Waste fittings, brass, chromium plated with waste pipe complete all as specified.

S & F 32 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified.

S & F in repair brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.

S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete as fixed complete all as specified.

S & F in repairs 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified.

S&F in rep vitreous china wash down water closet pan (pedestal pattern), EWC white including connection to drain (or outgoing pipe) and to flushing pipe with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified.

S&F in repair European WC single piece china ware coloured cascade with cistern and complete fittings ( P or S trap ) Make- Cera, Hindware or Parryware/ Somany

S&F in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

S & F PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified.

Dismantling water tanks any type (RCC/PVC) incl disconnecting all connections of capacity exc 500 & not exc 1000 ltrs.

Dismantling water tanks any type (RCC/PVC) incl disconnecting all connection of capacity exc 250 & not exc 500 ltrs.

Supply and and fixing, hoisting PVC tank of 1000 ltr capacity including Supplied and fixed 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed.

Supply and and fixing, hoisting PVC tank of 500 ltr capacity including Supplied and fixed 20 mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, CP urinal & spreader etc pointing around urinal back in cement, including waste pipe, CP urinal spreader complete all as specified and as directed.

S&F in repair soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs.

S & F in repairs ball valve high pressure of PTMT wiyh epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete.( 210 gms weight ) complete all as specified.

S&F in repair 15 mm bore CP Wall mixer for mixing hot & cold water incl mixing for overhead shower also screwed down for iron pipe and fixed.

S & F in repair floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified.

S&F in repair 15 mm bore CP Basin Mixer for mixing hot & cold water screwed down for iron pipe and fixed.

S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs.

S&F in repair 15 mm bore CP Sink Mixer for mixing hot & cold watertwo way screwed down for iron pipe and fixed.

S&F Health faucet(ABS body mild steel chromium plated suitable for 15mm dia pie with 1.25m long flessible pipe & ABS hook including making connection and fixed in repairs complete all as specified and as directed.Make-Somany,Jaquar,Hindware,Cera

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified.

Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified.

Dismantling unframed work of timber scantlings 40 sqcm and over in any section, in any position complete all as specified.

M & L for Clean sawn 2 nd class hard wood in scantling as a post and rafter, purlins etc complete all as specified.

S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified incl filling of gaps between wall and sheet with PCC 1:2:4 ( 20 mm graded agg)/ brick work CM 1:4 and plastering the surfaces with CM 1:4 on both side where required cost of the same shall be deemed to be included in quoted rate complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M & L two coats of synthetic enamel paint over priming with red oxide over preparation of new iron surfaces of any description over 10 cm width or girth complete all as specified and as directed.

Dismantling of wall and ceiling board/partition, wall panelling (fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed.

S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed.

M&L of false ceiling in step(s) comprising of 12mm thick Gyp board including GI frame work for seamless ceiling made of GI perimeter channel 0.55mm thick with two unequal flange of 20 to 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flange of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thicknesshaving kurledweb of 50mm and flangeof 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre with and including two coats of plastic emulsion paint complete all as directed. Make-India Gypsum/Gyproc/Lafarge.(Note:- The measurement shall be made flat from wall to wall without considering step(s).

S&F for in repairs 5 to 8 mm thick interlocking PVC hollow wall panelling fixed with self tapping screw of approved colour and design complete all as specified and directed by Engr-in-Charge incl dismantling of old unserviceable board any tyupe .

S&F for 0.50mm thick GI channel sheet of width 35-45mm for wall panelling channel inclusive of fixing on to wall to make level complete all as specified and directed.

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and as directed.

M & L for rendering 10 mm thick with ready mix plaster of Brick/stone masonary surface or concrete surfaces complete all as specified and as directed.

M & L for rendering 15 mm thick with ready mix plaster of Brick/stone masonary surface or concrete surfaces complete all as specified and as directed.

M&L for two coats of cement base paint over chalk whitening newly plastered surfaces of walls including preparation of surfaces all as specified.

M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty over one coat of chalk whitening primer complete.

M&L for Two coat of white wash over preparation of new wall surface complete all as specified and directed.

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.

M&L for Cement concrete as PCC 1:4:8 type D-2 using (40mm graded stone aggregate) as foundations,filling and mass concrete complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection finished even and fair and laid in alternate bays complete all as specified and directed.

Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

All as per item No 79 above but except bricks.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O all as specified.

M & L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces and applying one coat of oil bound distemper (White or tinted) on walls complete all as specified.

M & L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces and applying two coat of oil bound distemper (White or tinted) on walls complete all as specified.

M&L for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted iron and iron based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and as directed.

M&L for providing and fixing in repair Stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. , including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangemnet and its components including levelling, grouting, providing holes as required for services etc. complete all as specified and direction of Engineer-in-Charge.

S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hinges, handle, aluminium snap on bidding for fixing of glass panes/partical board in frame. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

M&L for 4mm thick tinted sheet glass, ordinary quality and fixed with glazing clips for aluminium/MS windows etc in square in n exc 0.5 sq.m in each pane complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl making good all disturbed portion complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n.exc 2 sq.m each store complete all as specified and as directed.

S&F powder coated aluminium sliding window, three track shutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkhats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 4mm thick and stainless steel wire loth 0.36mm nominal dia of wire and average width of aperature 1.20mm, size of side rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.20mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and as directed.

S&F for powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, anodised aluminium snap beading, screws etc, complete all as specified and as directed.

S&F for powder coated aluminium ventilator shutters, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperature 1.20mm, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

M & L for providing 10 to 12mm thick toughened glass openable door,sliding door, fixed glass and two leaf glass up to 11 feet High ,glass partition (2.1 pvb interlayer bondede between two glass piles using heat and pressure) including SS hardware or equiavalent hardware (glass to floor,glass to glass,glass to wall junctions and as directed by Engr-in-charge incl eatching/frosting of glass ,SS jointing clip, fasteners, SS locking arrangement complete etc deemed to be included in quoted rates complete all as spd and directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor upto 1.2 Sqm complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor/kitchen upto 0.5 Sqm complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, complete all as specified and as directed.

Providing and fixing factory made single extruded WPC (Wood polymer composite) 100 % solid decorative both side flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder, rick husk, wheat husk) and on toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately)

S & F Aluminium alloy, anodised,sliding door bolt 250 mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as spd and directed.

S & F floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 140mm overaii length of cover plate complete all as specified.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x70 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in Quoted Rate). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F 100 mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed.

S&F 150mm size aluminium anodized handle complete all as specified and as directed.

S&F 100mm size aluminium anodized handle complete all as specified and as directed.

S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 150 mm complete all as specified.

Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed .

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter/shelf/ of 18 mm thickness one side laminated consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity not less than 650 kg per cum manufactured by ISO-9000 certified company having good screw holding capacity 18mm thick and fixed as in cupboard/shelf/kitchen/shutters/shelf etc . The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S & F double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty complete all as spd and and directed.

S & F in repair Door closer hydraulically regulated aluminium die cast body universal type suitable for 851 to 1000 mm in width and weight between 61 to 80 kg complete all as spd and directed.

S & F 30 mm continious ( piano) width of flap ( when open), hinges mild steel, bright finish or electrogalvanised complete all as spd and directed.

M & L for rolled mild steel work angle iron as in door frame (Chowkhats) confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S&F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed.

S&F for 30mm thick flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.

S & F 100 mm long Hasp and staple safety type aluminium anodised with mildv steel hinge pin incl bolt to hinge plate and fixed with SS star screwe complete all as spd and directed.

M&L for preparation of new wood & wood based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for in repairs Prelaminated particle board of 9mm thick, interior grade prelaminated both sides with decorative choice laminations with teak wood leaping fixed with screws as in cupboard shutters, bed room, kitchen, aluminium partition and internal shelves complete all as specified.

S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

All as per item No 125 but except pipe complete all as specified and directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

All as per item No 127 but except pipe complete all as specified and directed

S&F PVC (SWR) bend any radius 110mm complete all as specified and directed.

S&F PVC (SWR) bend any radius 75mm complete all as specified and directed.

S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele

S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele

M&L for preparation of old decorated plastered or unplaster surfaces of walls and applying two coats of exterior emulsion paint (light shade) @ 4.35 sq.m/litre by using roller to prepared external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces as recommended by manufacturer of exterior emulsion by using following brands of emulsion including filling of cracks/holes by crack filler complete all as specified and directed.

M&L for preparation of old decorated plastered or unplaster surfaces of walls incl complete removal of existing treatment and applying one coat of exterior emulsion paint (light shade) @ 9.30 sq.m/litre by using roller to prepared external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces including filling of cracks/holes by crack filler complete all as specified and directed.

M&L for Complete removal of existing treatment and applying two coats of oil emulsion distempering over a coat of interior wall primer over 1.5mm thick wall care putty, including removal of unnecessary nails and filling of holes/cracks by crack filler on surfaces of walls, complete all as specified and directed.

Hacking out old broken glass from metal frame including punching or drilling out old glazing pins complete all as specified and directed.

M&L sheet glass 3.0mm thick ordinary quality and glazing with oil putty in steel window and wooden beading in wooden window/door, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repair 25mm stainless steel curtain rod with fancy type fixing stainless steel brackets,funnels, stops, rollers end to end SS wall bracket etc. complete and all mesured in RM all as specified and directed by Engr-in-charge.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified.

S&F in repair 15mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 250Ltrs and n exc 500Ltrs capacity complete all as specified.

Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 500Ltrs and n exc 1000Ltrs capacity complete all as specified.

Taking down Anodised aluminium doors shutters exc 1.5 sqm and not exc 4 sqm and cutting it to required shape including necessay joinery cleats, glazing clips, rubber packing, chowkats aluminium snap beading, screws,and change of door closer/floor spring (if required shall be paid sepratley) etc and fixing in same opening all as specified and directed by eng- in charge.

S&F in repairs Mild Steel Window handles of approved quality with fixing nuts complete all as specified and directed.

S&F in repairs MS Peg Stay for Steel Window 300mm long with nuts complete all as specified and directed.

M&L welding in repairs not exceeding 2.5 cm in length to the metal not exceeding 6mm thick complete all as specified and as directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work.

M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas/beam etc incl necessary formwork complete all as spd and dfirected.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No. 152 above but 6mm to 8mm dia.

M&L for cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, hold fast, bed blocks/ including formwork complete all as specified and directed.

Taking down unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc.removing marerialso storeforeeping in safe custody or for taking credt and making good disturbed surfaces of walls, floor etc.complete all as directed.

Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for

One light/Fan point controlled by one switch.

All as per Item No-156 but One light point controlled by two two way switches.

All as per Item No-156 but One 3 pin socket outlet 5 Amps on the same board.

All as per Item No-156 but One 3 pin socket outlet. 5 Amps on the independent board

All as per Item No-156 but One bell point controlled by one switch

All as per Item No-156 but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

All as per Item No-156 but One 15 A socket outlet on the same board with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :

One light/fan/bell point controlled by one by one way switch.

-ditto- as above item No16 but One 3 pin socket outlet 5 hole 5 Amp independent board socket & switches to be measured and paid separately.

ditto- as above item No157 but Same board.

-ditto- as above one power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 1.5 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete.

Supply and fix switch piano flush type single pole one way 6 Amps complete all as specifed .

Supply and fix switch piano flush type single pole two way 6 Amps complete all as specified .

Supply and fix Bell push button 5 Amp, flush type complete all as specified .

Supply and fix Bell, Ding Dong electric AC 230 Volts single pole complete all as specified and as directed.

M & L for switch socket combination 3 pin 6 Amps flush type (multi purpose ) complete all as specified and as directed.

M & L for switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.

M & L for ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S&F electronic step type Fan regulator flush type (speed regulation in 5 steps) 120 watts complete all as specified and as directed.

S & F lamp holder PVC/ Poly carbonate, angle/batten Bakelite complete all as specified and directed.

S & F LED Tube rod light double side connection T-8, 18 watt Suitable for 4 feet long frame all as specified and directed.

S&F wall mounted LED Light fittings, 4 feet long, with 18 W LED tube rod and box type batten double side connection type complete all as specified and directed.

S&F wall mounted LED Light fittings, 2 feet long, 9 W, polycarboate housing and integrated electronic driver complete all as specified and as directed.

S&F Decorative wall light fixture, madeup of polycarbonate and incl with 10 Watt LED lamp (B22 base)all as specified and directed .

S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 36 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed.

S&F in replacement Post top, (Coral Opal) landscape luminare with high power LED 25 W making arrangement for fixing light fittings on pole/stand post/pillar with GI pipe all as specified and directed

S & F in replacement double door sheet metal enclosures factory made TPN DBs, protection class IP-43, Conforms to 8623-1 & IEC 61439-1 & 3 ,IK Double door DBs ,Available in CRCA Sheet metal, ready to use DBs-Provided with 100A insulated phase bus-bars/neutral bar/s with shroud/earth bar/sticking saddles/cement spill protector/colour coded interconnecting wire set/Cable ties/blankingbplates and circuit identification lables,with provision for FP MCCB/Isolator / as incomer and incomer and SP MCBs as outgoing

Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

M&L in replacement MCCB 125 Amps, 16 KA , 4P, complete.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix MCB DB SPN 4 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix in repair MCB triple pole and neutral 415 V 63 Amps complete all as specified and directed. .

Supply and fix in repair MCB SPN 40 to 63 Amps, 240 volts complete all as specified and as directed.Make : L&T BB20400B

Supply and fix in repair MCB SP 5 to 32 Amps, 240 volts complete all as specified and as directed.

M & L in repair sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade including 6 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.

All as per item No - 181 above but with 2 runs of 4 Sqmm cable with one run of 4 Sqmm cable for earthing.

All as per item No - 181 above but with 2 runs of 2.5 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

M&L for earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion.

Note: Amount of sch of credit of Rs.100180/-will be deducted from total amount of BOQ.

MAHIMA CONSTRUCTION (BID ID -3052885)

J Sams Contructions (BID ID -3053365)

Vinod Enterprises (BID ID -3054086)

VS CONSTRUCTION (BID ID -3053564)

M/S Chandan Construction Company (BID ID -3054106)

M/S B R BHALERAO (BID ID -3053417)