Loading…
Loading…
Tender Value
₹71.0 L
EMD Value
₹1.4 L
Closing Date
7 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DYCEE/WS
18 conditions · 7 needing a document upload
Item No.10.2- Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of 'V/N' or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Annexure VI-B must be submitted for Financial Eligibility, as enclosed herewith.
Item No.10.1- Technical Eligibility Criteria:(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
(b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or(ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2) In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b)(3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.
However, if required in tender documents by way of Special Conditions, a formal agreement duly notarized, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows:The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Note for Item 10.1:Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar work for Technical Eligibility:- "Satisfactory execution of any electrical work related to HT/LT installation".
48 conditions · 13 needing a document upload
Please submit your Bank details such as Name of the - Bank along with Bank Branch code, account No., IFSC Code and PAN Number as per the format Annexure-A given in attached tender document.
I/We have carefully gone through the Clause no 10 to 18 of GCC- APRIL,2022 and understood that non-compliance of requirement of these clause and non submission of required documents in compliance, my/our offer will be rejected.
Please furnish list of plant and Machinery available on hand and proposed to be inducted. Own and hired to be given separately for the subject work.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Please furnish list of Works on hand indicating description of Work, contract value, approximate value of balance work yet to be done and contract No. and date of award, awarding unit name & address etc.
Please furnish list of Works completed in last seven financial years giving description of work, organization for whom executed, approximate value of contract at time of award, date of award and date of completion. Date of actual. start, actual completion and final value of contract shall also, be given.
Generally deviations of contractor against the Railways specification & special conditions stipulated in the entire tender booklet are not acceptable. Therefore, tenderers are advised not to quote any deviation against the Railways conditions & specification stipulated in tender' document. However, deviation if any should be evaluated in financial term and rate quoted accordingly i.e. deviations should be considered into rates.
Tender should submit documents related to Registration details, GSTIN No., registered address, email ID etc.
No octroi duty is payable. However if desired, a certificate stating that the hired Vehicle is requited for Railways own use shall be issued.
The tender document form is issued free of cost to all tenderers and Bid Security as indicated in the NIT header shall be paid through online' gateway/E-Payment facility provided on IREPS website only. In case, submission of Bid Security in the form of Bank Guarantee, The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of before closing date for submission of bids. In case payment of Bid Security is not successful during E-payment, the offer will be summarily rejected.
Note: (i) Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security detailed above.
NOTE (ii) Labour Cooperative Societies shall submit only 50% of above Bid Security detailed above.
JVs/Consortiums/MOU s will not be considered.
GCC Clause 14: Documents to be Submitted Along with Tender : (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii)Following documents shall be submitted by the tenderer: (a) Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. (c) Partnership Firm: (i) All documents as mentioned in Para 18 of the Tender Form (Second Sheet). All terms & conditions applicable for this clause may read carefully as mentioned in GCC-April-2022 Para-18 (Sr. No. 18.1 to 18.11) enclosed in NIT. (d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet).(e) Company registered under Companies Act-2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.
(f)LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract.(v) All other documents in terms of explanatory notes in clause 10 above. (g) Registered Society & Registered Trust: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed(iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society(iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.(iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv) After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v)A tender from JV / Partnership firm etc. shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
GCC Clause No.15:- The tenderer whether sole proprietor / a company or a partnership firm / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing 12.1.1 which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Bid Security shall be deposited either in cash through epayment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of before closing date for submission of bids. E-Tender Forms shall be issued free of cost to all tenderers.
The Bid Security deposited by the Contractor with his tender if applicable will be retained by the Railways as part of security deposit for the due and faithful fulfillment of the contract by the Contractor. The Security Deposit shall be 5% of the contract value. The Bid Security submitted by the Contractor with his tender will be retained/encashed by the Railways as part of security for the due and faithful fulfillment of the contract by the Contractor. Provided further that, if Contractor submits the Cash or Term Deposit Receipt issued from a Scheduled commercial bank of India or irrevocable Bank Guarantee Bond from a Scheduled commercial bank of India, either towards the Full Security Depositor the Part Security Deposit equal to or more than Bid Security, the Railway shall return the Bid Security, to the Contractor.Balance of Security Deposit may be deposited by the Contractor in cash or Term Deposit Receipt issued from Scheduled commercial bank of India or irrevocable Bank Guarantee bond issued from Scheduled commercial bank of India, or may be recovered at the rate of 6% of the bill amount till the full Security Deposit is recovered. Provided also that in case of defaulting Contractor, the Railway may retain any amount due for payment to the Contractor on the pending "on account bills" so that the amounts so retained (including amount guaranteed through Performance Guarantee) may not exceed 10% of the total value of the contract.The Irrevocable Bank Guarantee submitted towards Security deposit shall be initially valid up to the stipulated date of Maintenance period plus 60 days and shall be extended from time to time, depending upon extension of contract granted in terms of Clause 17A and 17B of the Standard General Conditions of Contract.Note: Security Deposit deposited in cash by the Contractor or recovered from the running bills of a Contractor or submitted by contractor as Term Deposit Receipt(s) can be refunded/returned to the contractor, in lieu of irrevocable Bank Guarantee bond issued from scheduled commercial bank of India, to be submitted by him, for an amount equal to or more than the already available Security Deposit, provided however that, in a contract of value less than Rs. 50 Crore, such refund/ return of the already available Security Deposit is permitted up to two times and in a contract of value equal to or more than Rs. 50 Crore, such refund / return of the already available Security Deposit is permitted up to three times.
Rates are inclusive of all taxes, duties, labour, freight; material, insurance etc. No extra payment will be made on this account. Railway may deduct any taxes being levied by the Government from No time to time or in force from time to time. Tenderer may consider this aspect while quoting for the work.
Performance Guarantee: The procedure for obtaining Performance Guarantee is outlined below:-(a)The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22ndday after the date of issue of LOA. Further, if the 60thday happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day.In all other cases, if the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated. In case contract is terminated railway shall be entitled to forfeit Bid Security and other dues payable to the contractor against that particular contract, subject to maximum of PG amount. In case a tenderer has not submitted Bid Security on the strength of their registration as a Startup recognized by Department of Industrial Policy and Promotion (DIPP) under Ministry of Commerce and Industry, DIPP shall be informed to this effect. The failed Contractor shall be debarred from participating in re-tender for that work.
(b) (i)The successful bidder shall submit the Performance Guarantee (PG) in any of the following forms, Amounting to 5% of the original contract value in favour of Dy.FA&CAO, CMLR, Jhansi:-(i)A Deposit of cash; (ii)Irrevocable Bank Guarantee;(iii) Government Securities including State Loan Bonds at 5% below the market value;(iv) Pay Orders and Demand Drafts tendered by any Scheduled Commercial Bank of India;(v) Guarantee Bonds executed or Deposits Receipts tendered by any Scheduled Commercial Bank of India;(vi)Deposit in the Post Office Saving Bank; (vii)Deposit in the National Savings Certificates;(viii)Twelve years National Defence Certificates; (ix)Ten years Defence Deposits;(x)National Defence Bonds and(xi)Unit Trust Certificates at 5% below market value or at the face value whichever is less. Also, FDR in favour of FA&CAO (free from any encumbrance) may be accepted. (b) (ii) Additional Performance Guarantee: as per GCC Clause No.16 (4)(h)In addition of Clause No.16 (4) of General Conditions Of Contract- April-2022, along with Correction Slip No.11 dated 13.03.2026, will apply.If a tender is accepted on the quoted rates of Bidder which is below the advertised tender value, an additional performance security shall be submitted by the bidder as below:Bid quoted in % of advertised Cost, Below 0-5% (inclusive),Additional Performance Guarantee (%) will be NIL and Bid quoted in % of advertised Cost, Below 5% ,Additional Performance Guarantee (%) will be 5%.
(c)The Performance Guarantee shall be submitted by the successful bidder after the Letter of Acceptance (LOA) has been issued, but before signing of the contract agreement. This P.G. shall be initially valid upto the stipulated date of completion plus 60 days beyond that. In case, the time for completion of work gets extended, the Contractor shall get the validity of P.G. extended to cover such extended time for completion of work plus 60 days.
(d)The value of PG to be submitted by the Contractor is based on original contract value and shall not change due to subsequent variation(s) in the original contract value.
(e)The Performance Guarantee (PG) shall be released after physical completion of the work based on 'Completion Certificate' issued by the competent authority stating that the Contractor has completed the work in all respects satisfactorily.
(f)Whenever the contract is rescinded, the Performance Guarantee already submitted for the contract shall be encashed.
(g)The Engineer shall not make a claim under the Performance Guarantee except for amounts to which the President of India is entitled under the contract (not withstanding and/or without prejudice to any other provisions in the contract agreement) in the event of:-(i)Failure by the Contractor to extend the validity of the Performance Guarantee as described herein above, in which event the Engineer may claim the full amount of the Performance Guarantee. (ii)Failure by the Contractor to pay President of India any amount due, either as agreed by the Contractor or determined under any of the Clauses/Conditions of the Agreement, within 30 days of the service of notice to this effect by Engineer.(iii)The Contract being determined or rescinded under clause 62 of these conditions.
Tenderer shall upload the documents in PDF format only.
The Railway administration reserve the right to reject any tender either in whole or in part without assigning any reason whatsoever. The final acceptance of the tender shall rest with the competent authority of Railway whd reserve. the right to accept or reject any tender without assigning any reason thereof and does not bind himself to accept the lowest tender only.
Estimated rates are all inclusive and rate to be quoted should be all inclusive. Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and the locality of the work, that all conditions liable to be encountered during the execution of the works are taken in to account that the rates he enters in the tender form are adequate and all inclusive accord with the provision in Clause- 37 of the standard general conditions of contract for the completion of the works to the entire satisfication of the Engineer.
Improvement in general lighting arrangement of wagon repair workshop Jhansi and its surrounding area.
JHS-DyCEE-WS-T-01-2026-27~NCR
JHS-DyCEE-WS-T-01-2026-27
Open
Works - General
6 Months
Jhansi, Uttar Pradesh
₹0
₹1.4 L
12 Aug 2026
12 Aug 2026
24 Aug 2026
59 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 71,02,197 | ||
| — | 20.00 | — | — | ||
| Supply, erection, testing & commissioning of steel tubular pole of 9.5 meter long (410 SP- 160 kg) confirming to IS-2713 Pt-II latest with 5 mm thick base plate, including foundation, muffing and painting complete with teminal box for incoming and outgoing. | — | — | — | 2,39,480 | |
| — | 3000.00 | — | — | ||
| Supply erection testing and commissioning of 4core1 6 sq sqmm PVC insulated aluminum armored cable etc. | — | — | — | 3,78,000 | |
| — | 50.00 | — | — | ||
| Supply, fixing, installation & commissioning of Solar Street Light (LED based) consist of white LED luminaire ( LED + Driver) along with Solar PV modules and LiFePo4 battery of given capacity, necessary control electronics, interconnecting wires / cables, module mounting structures, etc. to operate from dusk to daw. Power output of PV Module 75 Wp at 16.4 ±0.2 Volt at STC , Battery capacity 12.8 V (nominal), 30 Ah at STC (1 day autonomy) , Type of LED (Light source) 30 Watt White LED type , Ingress protection IP65 or better , Provided with 2 LED indicators: a green light to indicate charging in progress and a red LED to indicate deep discharge condition of the battery. The green LED glow only when the battery is actually being charged. A corrosion resistant metallic frame structure to hold the SPV module . Height of pole 6 meter hot dip galvanized , hot dip galvanized metallic box (IP65 or better) with anti-theft locking arrangement for outdoor use, Including foundation civil work. | — | — | — | 7,79,100 | |
| — | 525.00 | — | — | ||
| Supply of materials & making wiring of various points such as FT fittings/ceiling fans /ordinary light point etc. with 2.5 sqmm (FRLS) PVC insulated multi stranded copper conductor cable single core conforming to IS : 694 or latest version on surface PVC casing capping channel heavy duty 2mm thickness double locking / in recessed PVC conduit pipe heavy duty 2 mm thickness ISI mark ( As per site requirement ) with Bakelite batten holder /angular holder / ceiling rose , 5A flush type switch/Modular switch , white phenolic laminated sheet cover on front of recessed MS box or suitable size or PVC box / modular box for surface system with brass screws, cup washers etc. including earth continuity copper wire of 1.5sqmm PVC insulated copper wire complete ( Note :- The wire from SDB to switch board shall be of 04 sq.mm PVC insulated copper wire. & In recessed type wiring system after wall/surface excavation, filling should be with same material in all respect required as per site .) (Also inclusive Removal of existing wiring if required ). | — | — | — | 5,02,425 | |
| — | 15.00 | — | — | ||
| Supply, erection, testing and commissioning of Metal clad SDB with 12 way DB 1x63 Amps Isolator 04 pole,4x20 Amps MCB SP, 6x10 amps MCB SP & 01 nos. RCCB of 63 Amps with all other accessories required as per site. | — | — | — | 88,470 | |
| — | 20.00 | — | — | ||
| Supply, erection, testing and commissioning of 8 way DB with 40 Amp. MCB DP, 6x10 amps MCB SP with all other accessories required as per site with fixing Outdoor type SDB. | — | — | — | 43,000 | |
| — | 500.00 | — | — | ||
| Supply, erection, testing and commissioning of sub main of 6 Sq.mm PVC insulated sheathed copper wire, multi strands, 1100 volts grade, continues PVC insulated sheathed copper earth wire of 1.5 sq mm, through PVC heavy duty conduit pipe/PVC Channel complete with all other accessories required as per site and removal of existing wiring of sub main if required. ( Also inclusive Removal of existing submain if required ) | — | — | — | 53,000 | |
| — | 25.00 | — | — | ||
| Supply, erection, testing and commissioning of 100 watt rechargeable Highbay LED Light of 45 minutes backup. CCT: 6500 +/- 500K. CRI: >70. Luminaries efficacy: >120 L/m. Input supply: 230V AC. 12 Ah 12.8V Lifepo4 battery including internal charger. Lights should be continuous ON even failure of Main AC supply without any loss of Lumen output. | — | — | — | 2,82,500 | |
| — | 75.00 | — | — | ||
| Supply, erection, testing and commissioning of pipe earthing arrangement as per IE rules & Rly. Drawing for suitable earth resistance value and all other accessories required. | — | — | — | 1,61,550 | |
| — | 700.00 | — | — | ||
| Supply and laying of HDPE pipe of 110mm outer dia PE80, PN-6 (wall thickness :6.3 mm to 7.2mm) with proper jointing , bends, clamps etc., as per site condition with all necessary accessories. | — | — | — | 2,10,000 | |
| — | 300.00 | — | — | ||
| Supply of materials & making wiring points of 5 pin 5A plug socket with 2.5 sqmm PVC insulated multi stranded copper conductor cable ((FRLS/FRLSH) single core conforming to IS : 694 latest version in recessed/ on surface (As per site requirement) with PVC conduit pipe heavy duty (ISI mark) / on surface PVC casing capping channel heavy duty with, 5A flush type switch / modular switch on front of sheet / modular top to modular box/ PVC box / MS box of suitable size with brass screws, cup washers etc. complete including earth continuity wire of 1.5 sqmm PVC insulated, Complete with all other accessories required as per site. (Also inclusive Removal of existing point if required ). | — | — | — | 51,900 | |
| — | 150.00 | — | — | ||
| Supply of materials & making wiring point of 6 pin combined power point 15A/5A with wiring by 4 sqmm PVC insulated multistranded copper conductor cable ((FRLS/FRLSH) single core conforming to IS : 694 OR latest version on surface PVC casing capping channel heavy duty / in recessed PVC conduit pipe heavy duty (ISI mark), with 15 A flush type switch/ modular switch, 16 Amps MCB SP , white phenolic laminated sheet cover on front of recessed MS box or Modular box/PVC box of suitable size with brass screws, cup washers etc. including earth continuity copper wire of 1.5sqmm PVC insulated copper wire complete. (Also inclusive Removal of existing point if required). | — | — | — | 1,42,500 | |
| — | 4.00 | — | — | ||
| Real water portable water purification system with inbuilt water cooler 100LPH type of water purification UV, Power consumption 300 watt, Input TDS 1000 operation mode fully automatic &automatic cutoff availability of sediment & activated carbon filter UV lamp inbuilt storage tank with float valve 50 Litre 3 stage purification commissioning & installing & included warranty on machine & compressor one year reputaded make. | — | — | — | 4,29,180 | |
| — | 2.00 | — | — | ||
| Water purifier (Chiller Pant) complete fitting with installation. 1000LPH | — | — | — | 4,94,000 | |
| — | 50.00 | — | — | ||
| Supply, erection, Testing and commissioning of 6 Mtr. Galvanized (as per BS EN ISO 1461) octagonal pole with base plate 220x220x12mm, top 70mm and bottom 130mm of 3mm thick sheet suitable for maximum wind speed upto 160 Km/Hr. Including foundation bolts and foundation with M 20 grade RCC and FE 415 grade reinforcement (450x450x800 Cm dee) (foundation should be as per design approved by pole manufacturer) GI base plate G.I. anchor plate etc.as required including supplying and fixing of single arm hot dipped galvanized bracket suitable for street light fittings and supplying and drawing of 3 x2.5Sq.mm FRLS copper conductor single core cable from junction box with two Nos 6/10AMP MCB to luminaire complete including termination with copper lugsas required. | — | — | — | 3,11,850 | |
| — | 320.00 | — | — | ||
| Design, Fabrication Supply installation testing and commissioning of glow sign board acrylic sheet, both sided 2mm acrylic sheet with vinyl letters, covered with 2mm unbreakable transparent sheet with rectangular box made by aluminum angle of 20SWG with provision of 0,5 inch binding of 22 SWG and LED module lights with adapter suitable for LED lights input 110/220volt AC supply and box shall be made available for proper mounting arrangement on the wall of the celling. note- the box shall be made suitable arrangement for eassy maintainance in future. | — | — | — | 4,72,000 | |
| — | 8.00 | — | — | ||
| Supply, fixing, installation & commissioning of Straight P.U. Painted casting aluminum Decorative pole with Post top Lantern. Specification: (A) Decorative surface mounted pole 4.5 mtr Long made out of MS Tubes with aluminum cast embellishments. The poles are Polyurethane Paint (Vintage copper color). The pole have service window at the bottom on the pole for housing the MCD and terminal strips (B) Double Arm Decorative Bracket Made of MS Suitable for hold 2 Nos. 45 Watt Post top Lantern Complete In all respect. (C) Decorative 48 watt LED post top indirect Light luminaries having pressure die cast set confirming to IP65 or above protection complete In all respects (D) 40A capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time plane switch TSO 100 Series with contractors. HRC Fuses isolating switch metering instrument& instrument box with cuts etc. in case of TPN Complete in all respect. (E) Making RCC Foundation (1:3:6) ratio of Cement, Sand and Concrete suitable for 4.5 mtr long Decorative pole including foundation bolt complete in all Respect. | — | — | — | 2,10,080 | |
| — | 30.00 | — | — | ||
| Supply, Erection, Testing and commissioning of Bollard fitting with LED lights 08Watt as per specification of Cat No. of Havells model no.- BAMB OOBLS8WLED830PSYMTOPC or approved make as decided by CA | — | — | — | 1,41,480 | |
| — | 80.00 | — | — | ||
| Supply, erection, Testing & Commissioning of energy officiant LED streetlight fitting 60 Watt outdoor complete street light fitting pressure die case aluminum (PDC) body with make embossed on PDC body and complete with all accessories/ components and connection with PVC copper wire 2.5sq. mm size multicore and fixing arrangement as per site requirement. The technical parameters will generally conform to relevant Rallway specification attached | — | — | — | 2,88,880 | |
| — | 100.00 | — | — | ||
| Supply, erection, testing and commissioning of BLDC fan, 1200 mm Sweep, Single Phase , 230 V, 50 Hz AC & electronic regulator with all accessories. ( wattage rating / 25-32 watt ) & Fixing of C/fan complete with all fixing accessories. Ceiling fan to be connect from the ceiling roses through PVC flexible pipe by 1.5 Sq.mm PVC insulated, multi strands copper wire. | — | — | — | 2,31,200 | |
| — | 60.00 | — | — | ||
| Supply ,erection, testing and commissioning of LPTH-20-CDL LED post light fittings complete with all fixing accessories etc. | — | — | — | 2,38,500 | |
| — | 240.00 | — | — | ||
| Supply and fixing of 50 mm dia (I/D) GI pipe class B IS:1239 Pt. I latest with all fixing accessories of pole light. | — | — | — | 37,920 | |
| — | 500.00 | — | — | ||
| Supply, erection, testing and commissioning of GI bracket pipe single arm type, class B as per IS: 1239 latest of required size and length with all fixing accessories suitable to fix on top of steel tubular pole/shed structure to hold street type luminaries. | — | — | — | 1,96,000 | |
| — | Breakup | for details. | — | ||
| Supply and installation, programming of variable frequency drive (VFD) for required capacity. | — | — | — | 6,66,269 | |
| — | Breakup | for details. | — | ||
| Supply, Erection, Testing and commissioning of Cogged belt of different size. | — | — | — | 20,813 | |
| — | 150.00 | — | — | ||
| Supply, erection, testing and commissioning of 2x18 watt, 4 feet LED tube light and fitting with fixture, connecting wire and all other fixing accessories required as per site. | — | — | — | 1,08,600 | |
| — | 300.00 | — | — | ||
| Supply of XLPE insulated 4 core 70 sqmm LT aluminum conductor cable 1.1 KV grade including connecting testing and energizing. | — | — | — | 1,57,200 | |
| — | 300.00 | — | — | ||
| Supply of 25 sq mm, 4 core XLPE insulated, LT underground, Aluminum conductor, armoured cables, 1100 Volt grade, steel armoured with required crimping socket lugs. | — | — | — | 60,300 | |
| — | 4.00 | — | — | ||
| Jumbo desert cooler, 130 tr nos. 10 water tank Capacity with 600mm fan, 0.65hp, 230V AC, 50Hz AC motor, louvers swing arrangement. | — | — | — | 1,06,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
GCC_April-2022.pdf
ATTACHMENT
GCC-ACSNo.1-14.07.2022.pdf GCC ACS No 1
ATTACHMENT
GCC-ACSNo.2-13.12.2022.pdf GCC ACS No 2
ATTACHMENT
GCC-ACSNo.3-26.04.2023.pdf GCC ACS No 3
ATTACHMENT
GCC-ACSNo.4-07.08.2023.pdf GCC ACS No 4
ATTACHMENT
GCC-ACSNo.5-20.10.2023.pdf GCC ACS No 5
ATTACHMENT
GCC-ACSNo.6-21.12.2023.pdf GCC ACS No 6
ATTACHMENT
GCC-ACSNo.7-25.09.2024.pdf GCC ACS No 7
ATTACHMENT
GCC-ACSNo.8-20.12.2024.pdf GCC ACS No 8
ATTACHMENT
GCC-ACSNo.9-09.01.2025.pdf GCC ACS No 9
ATTACHMENT
GCC ACS No 10
ATTACHMENT
GCCACS1113.03.2026.pdf
ATTACHMENT
AnnexureB.pdf
ATTACHMENT
AnnexureC.pdf
ATTACHMENT
AnnexureVNew.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
AnnexureVANew_1.pdf
ATTACHMENT
GCC-ACSNo.1-14.07.2022.pdf
ATTACHMENT
GCC-ACSNo.2-13.12.2022.pdf
ATTACHMENT
GCC-ACSNo.3-26.04.2023.pdf
ATTACHMENT
GCC-ACSNo.4-07.08.2023.pdf
ATTACHMENT
GCC-ACSNo.5-20.10.2023.pdf
ATTACHMENT
GCC-ACSNo.6-21.12.2023.pdf
ATTACHMENT
GCC-ACSNo.7-25.09.2024.pdf
ATTACHMENT
GCC-ACSNo.8-20.12.2024.pdf
ATTACHMENT
GCC-ACSNo.9-09.01.2025.pdf
ATTACHMENT
GCC-ACSNo.10-04.03.2025.pdf
ATTACHMENT
TenderDocT-01-2026-27lightingarrangement.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].