Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹10.1 Cr
EMD Value
₹10.1 L
Closing Date
15 Apr 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Package No BOL-015-NHM, Construction of CHC Building at Belpara under National Health Mission in the Bolangir district of Odisha
NBCC/ODISHA/ZO/NHM/NIT/22-23/042
NBCC/ODISHA/ZO/NHM/NIT/22-23/042
Open Tender-Domestic
Civil Works General
Balangir, Odisha
₹11,800
₹10.1 L
15 Apr 2023
30 Mar 2023
15 Apr 2023
15 Apr 2023
24 Apr 2023
Head Description of Item Unit Qnty. Rate Amount
Diluting and injecting chemical emulsion (to be
supplied free of cost at site of work) for PRE
CONSTRUCTIONAL Anti-termite treatment and
creating a continuous chemical barrier under and all-
round the column pits, wall trenches, basement
2 1 excavation, top perimeter of building, expansion 0 0.00 0.00 0.00
joints, over the top surface of consolidated earth on
which apron is to be laid, surroundings of pipes and
conduits etc. complete as per specifications (plinth
area of the building at ground floor only shall be
measured for payment).
Earth work in excavation of foundation trenches in
hard soil including dressing of sides and levelling
the bed up to the required depth and depositing the
excavated materials away from the work site within
50m initial lead & 1.5m initial lift. complete as
directed by the E.I.C
Supplying & filling of foundation with course sand
6 5 well watered and rammed including cost, cost of all 0 0.00 0.00 0.00
labour, carriage, royalty complete in all respect.
8 7 APPROACH ROAD Cum 31.50 339.13 10,682.66
Cement Concrete (1:3:6) using 40mm size hard
granite C.B. metal approved quality from approved
9 8 quarry including cost, carriage, royalty, cost of all 0 0.00 0.00 0.00
labour. etc complete and as directed by E.I.C.
Cement Concrete (1:2:4) using 12mm size hard
granite C.B. chips approved quality from approved
11 10 quarry including cost, carriage, royalty, cost of all 0 0.00 0.00 0.00
labour. etc complete and as directed by E.I.C.
R.C.C. M-25 grade with 20mm and down grade C.B.
chips of approved quality from approved quarry
including hoisting, laying hire charges of concrete
mixture, vibrator, watering, curing and cost of all
materials and labour, centering shuttering etc
complete but excluding cost of reinforcement.
14 13 COLUMN BASE FOOTING 0 0.00 0.00 0.00
16 15 COLUMN SUPER STRUCTURE 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Straightening, cutting, bending bent up or coiled
rods, including cranking, hooking, welding or
jointing the M.S. rods or tor confirming to I.S. 432
(Plain) and 1785 (Tor) steel and binding, tying the
41 40 grills, hoisting, lowering and placing in proper 0 0.00 0.00 0.00
position required for R.C.C. works including cost,
conveyance and taxes of M.S. rods or tor steel and
binding wires of 18 to 20 gauge and cost of all
labour etc.complete in all respect.
Brick work with Flyash Bricks 23cm x 11cm x 8cm
size having crushing strength not less than
75Kg/cm2 with dimensional tolerance ±2 percent in
45 44 cement mortar (1:6) in Foundation and Plinth 0 0.00 0.00 0.00
including watering curing, cost of carriage, royalty
and taxes of all materials, cost of all labour, etc
complete as per the direction of E.I.C.
Brick work with Flyash Bricks 23cm x 11cm x 8cm
size having crushing strength not less than
75Kg/cm2 with dimensional tolerance ±2 percent in
47 46 cement mortar (1:6) in Super Structure including 0 0.00 0.00 0.00
watering curing, cost of carriage, royalty and taxes
of all materials, cost of all labour, etc complete as
per the direction of E.I.C.
Brick work with Fly Ash. Bricks in cement mortar
(1:4) in Super Structure having crushing strength
51 50 not less than 75.00 kg/cm2 immerging the bricks in 0 0.00 0.00 0.00
water not less than six hours before use in
12mm thick C.P.(1:6) on brick masonary to the
smooth surface including watering, curing, cost,
54 53 carriage, royalty of all materials, cost of all labour, 0 0.00 0.00 0.00
etc complete as per the direction of E.I.C.
16mm thick C.P. (1:6) over brick masonary to the
smooth surface including watering, curing cost,
58 57 carriage, royalty, and taxes of all materials, cost of 0 0.00 0.00 0.00
all labour, etc complete as per the direction of
6 mm thick cement plaster (1:4) to RCC surfaces
62 61 finished smooth including closed deep chiping and 0 0.00 0.00 0.00
slury treatment.
Supplying, fitting and fixing Vitrified tile in floors of
approved make conformaing to IS:13755 laid on 20
mm thick cement mortar (1:4) and filling joints
with white cement of approved quality including
cost of all materials, etc. required for the work all
complete as per direction of E.I.C.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of Vitrified Industrial
floor tiles of premium grade having thickness 8mm
to 10mm confirming to IS 4457 of size 30cm x
30cm in floors of approved make laid on 20 mm
thick cement mortar (1:4) (1 cement : 4 course
sand) and filling joints with slurry including cost of
all materials, labour T&P etc required for the work
all complete as per direction of the Engineer-in-
Fixing Vitrified tiles in dados skirting and risers of
steps on 12mm thick CP (1:3) jointed with neat
71 70 cement slurry mixed with pigments to match the 0 0.00 0.00 0.00
shade of the tiles including cost, carriage, cost of
all labour etc. complete.
Supplying, fitting & fixing of 30cm x 20cm/20cm x
20cm special plain/printed series Ceramic wall tiles
of premium grade having thickness 6.5mm to
6.7mm confirming to IS 13753 in dadoes, skirting
74 73 and risers of steps laid on 12 mm thick cement 0 0.00 0.00 0.00
mortar (1:3) (1 cement : 3 course sand) jointed
with slurry mixed with pigment to match the
shades of the tiles etc. complete including cost of
all materials, labour T&P etc. required for the work
all complete as per direction of the Engineer-in-
Providing and fixing 20mm thick Granite stone
flooring (sample of Granite stone should be
approved by EIC) for stair case trade, riser and
similar locations where ever required in
horizontal/vertical surfaces of required size of
approved shade, colour and texture, with moulding
77 76 edge & Grooving etc. laid over 20mm thick bed of 0 0.00 0.00 0.00
cement mortar 1:4 (1 cement: 4 coarse sand) with
joints treated with white cement mixed with
matching pigment, epoxy touch ups including
rubbing, curing, moulding and polishing to give
high gloss finish etc. complete as per direction of
Engineer-in-charge. In all floors and all heights.
Finishing surface of walls with cement based wall
putty (water based) of approved make and finished
smooth and even surface to receive painting
including cost of scaffolding staging charges with
cost of all materials labour T & P etc. as per
direction of Engineer -In -charge.
Priming 1 coat with wall primer water bond cement
84 83 primer including all labour, materials etc. complete. 0 0.00 0.00 0.00
Wall painting 2 coats with plastic emulsion paint of
90 89 approved shade on new work to give an even shade 0 0.00 0.00 0.00
including cost of paint etc complete.
Wall painting two coat with any approved weather
94 93 coat paint including cost of all materials, labour 0 0.00 0.00 0.00
and T&P require for the work etc. complete as
directed by the E.I.C.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying of M.S. Door, Window with grills, Grills
made out of M.S. Angle frame, M.S. Flat, Sheet etc
of approved section & design, electrically welded
98 97 properly with all necessary locking arrengement, 0 0.00 0.00 0.00
and 1 coat red oxide primer including cost of all
materials, labour charges, carriage of materials to
site etc. complete.
Supplying, fitting and fixing of stainless steel of
304 grade in hand railing using 50 mm dia of 2 mm
thick circular pipe with Balustrade of size 32 mm x
32mm x 2mm @ 0.90 mtr C/C and stainless aquare
pipe bracing of size case as per approved design
and specification, buffing, polishing etc. with the
cost, conveyance taxses of all material, cost of all
labour etc. complete in all respect.
Supplying and fitting-fixing of Un-plasticised Poly
Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.)
Casement Door – 60- Series duly manufactured
using UPVC reinforced profiles of 60 mm x 55
mmx2.5 mm for outer frames, 102 mm x 60 mm x
2.25 mm for casement Door Sash Profile and 74
mm x 60 mm x 2.5mm mullion profile capable of
mounting single glazing system, structurally
reinforced with hot dip galvanised up to 50 microns
of minimum thickness of 2.0 mm prefabricated &
105 104 welded through fusion welding the door sash shall 0 0.00 0.00 0.00
be fitted with 12mm thick WPC Board of Greenply
make duly fixed with EPDM weathering seal
resistant accessories like clipping locking system
made of aluminium 1 No., per set of sashes and the
system is to be installed at the site using anchor
fasteners, silicon rubber sealant, easy glazing/
deglazing at site etc., including cost and
conveyance of all materials, accessories, labour
charges, materials and product conforming to
ASTM D 638-14,EN-477-95 and other applicable
Supplying and fitting-fixing of Un-plasticised Poly
Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.)
Three Track - Three Panel sliding window– 60-
Series duly manufactured using UPVC reinforced
profiles of 108mm x 45 mm x 2.5 mm for outer
frames and Window Sash of 39 mm x 58 mm x 2.5
mm capable of mounting single glazing system,
structurally reinforced with hot dip galvanised up to
50 microns of minimum thickness of 1.5 mm
108 107 prefabricated & welded through fusion welding the 0 0.00 0.00 0.00
window frame shall be fitted with 6 mm thick clear
toughened glass of SAINT-GOBAIN make duly fixed
with EPDM weathering seal resistant and the
system is to be installed using Reinforced Large
Coupler at the site using anchor fasteners, silicon
rubber sealant, easy glazing/ deglazing at site etc.,
including cost and conveyance of all materials,
accessories, labour charges, materials and product
conforming to ASTM D 638-14,EN-477-95 and other
applicable codes and standards.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying and fitting-fixing of Un-plasticised Poly
Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.)
Casement window with top fixed – 60- Series duly
manufactured using UPVC reinforced profiles of
60mm x 55 mm x 2.5 mm for outer frames.75 mm
x 60 mm x 2.25 mm for casement window sash
profile and 74 mm x 60 mm x 2.5 mm mulion
profile capable of mounting single glazing system,
structurally reinforced with hot dip galvanised up to
50 microns of minimum thickness of 1.5 mm
112 111 prefabricated & welded through fusion welding the 0 0.00 0.00 0.00
window frame shall be fitted with 6 mm thick clear
toughened glass of SAINT-GOBAIN make duly fixed
with EPDM weathering seal resistant accessories
like clipping locking system made of aluminium 1
no per set of sashes and the system is to be
installed at the site using anchor fasteners, silicon
rubber sealant, easy glazing/ deglazing at site etc.,
including cost and conveyance of all materials,
accessories, labour charges, materials and product
conforming to ASTM D 638-14,EN-477-95 and other
113 112 applicable
GROUND FLOORcodes and standards. Sqm 12.60 8951.48 1,12,788.65
Supplying and fitting-fixing of Un-plasticised Poly
Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.)
Ventilator/ Top Hung – 60- Series duly
manufactured using UPVC reinforced profiles of 60
mm x 55 mmx2.5 mm for outer frames, 75 mm x
60 mm x 2.25 mm for casement Window Sash
Profile capable of mounting single glazing system,
structurally reinforced with hot dip galvanised up to
50 microns of minimum thickness of 1.5 mm
prefabricated & welded through fusion welding the
115 114 window sash shall be fitted with 6 mm thick clear 0 0.00 0.00 0.00
toughened glass of SAINT-GOBAIN make duly fixed
with EPDM weathering seal resistant accessories
like clipping locking system made of aluminium 1
No., per set of sashes and the system is to be
installed at the site using anchor fasteners, silicon
rubber sealant, easy glazing/ deglazing at site etc.,
including cost and conveyance of all materials,
accessories, labour charges, materials and product
conforming to ASTM D 638-14,EN-477-95 and other
applicable codes and standards.-
Priming one coat with any approved primmer (To
118 117 Receive Enamel paint) including cost of primmer & 0 0.00 0.00 0.00
labour to give an even shade excluding cost of
Painting two coats with approved enamel paints of
approved colour, shade over a coat of primer
122 121 including sand papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all labour
etc, complete as per specification & direction of
GROUND FLOOR Sqm 45.77 168.98 7,734.03
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Providing & fixing chemical & sweepers, making dry
the surface with electric hot bower, grinding the
surface and clearing the dust particles
mechanically, applying micro cement concrete at
brick work side up to 75mm thick x 75mm height &
other side Horizontal expansion joint with 75mm x
75mm size micro concrete strips, repairing other
surface using cement concrete of Prop (1:3) as
required inserting & placing 60mm dia backer rod
in position, applying Sika primer 80 to the prepared
126 125 surface by brush & fixing combined (200mm x 0 0.00 0.00 0.00
2mm) with recommended adhesive Sikadue 31C
manually, after completion of the process testing by
flooring water on it. After confirmation covering the
length by aluminium sheet (300mm x 1.3mm) by
means PVC plug & SS Screw and washer the
horizontal expansion joint treatment with Sikadur
Combiflex system including cost of labour T&P wire
and remaining charge of all necessary machines etc
complete as per the direction of Engineer-in-
charge.Sikadur Combiflex x (200mmx2mm)+
127 126 Aluminium
GROUND FLOORSheet (300mm x1.3mm) Rmt 40.20 5000.73 2,01,029.50
Providing and fixing 300mm wide AL Strip 1.3mm
thick by stainless steel screw over a layer of
Hypolene flexible strip(Sikadur combiflex) of
200mm width & 2mm thick fixed by rasin based
129 128 adeshive sikadur 31c the Vertical Expansion Joint 0 0.00 0.00 0.00
including cost of all materials, labours, all taxes
ect. complete as directed by Engineer-in-
Combiflex(200mmx2mm)_Aluminium Sheet
Supplying fitting & fixing of 35mm thick flush door
shutters with flush door block board 'A' premium
35mm thick both side teak (Green ply / Allwin)
both side laminated with 4 mm thick veener board
(Teak Heritage) (Archid ply/ Green ply ) by using
132 131 adhesives, with all labour, iron fitting & wooden 0 0.00 0.00 0.00
hinged cleats etc. fitted & fixed complete in all
respect, including cost of iron fitting , alluminum
fittings, all labours, T&P etc. as per specification
approved by the Department & as per direction of
the E.I.C. SE no 284 dt 27.02.12 for Chief
25mm thick CC 1:2:2 with 6mm size CB chips for
134 133 grading concret over roof slab etc. complete. 0 0.00 0.00 0.00
Supplying all materials, labour, T&P and providing
Pidifin 2K including conveyance of all materials to
136 135 worksite, payment of royalty, taxes etc all complete 0 0.00 0.00 0.00
as per specification and direction of the Engineer in
Construction of embankment with approved
material obtained from borrow pits with all lifts and
138 137 leads, transporting to site, spreading, grading to 0 0.00 0.00 0.00
required slope and compacting to meet requirement
of table 300-2.
Construction of cement concrete kerb with top and
bottom width 115 and 165 mm respectively, 250
mm high in M 20 grade PCC on M-10 grade
foundation 150 mm thick, foundation having 50 mm
projection beyond kerb stone, kerb stone laid with
kerb laying machine.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Construction of Granular Sub-base by providing
coarsed graded materials,spreading in uniform
layer by mortar grader on prepared surface mixing
by mix in place method with rotavator at OMC and
compacting with vibratory roller to achieve the
density, complete as per Clause - 401.
Supplying , fitting, fixing Paver Block 80mm
thickness rubber mould tiles in floors of approved
make conforming ti IS : 13755 laid on 20mm thick
sand of approved quality including cost of all labour
T&P etc. required for the work all complete as per
direction of E.I.C (For New work only)
146 0 Sub-Total of Civil Works 0 0.00 0.00 8,01,18,864.54
147 0 Plumbing Works 0 0.00 0.00 0.00
GPH Works: Supplying all materials, labour, T&P 0 0.00 0.00 0.00
and providing and fixing to wall or ceiling and floor
pvc pipes confirming to ASTM-D- 1785/89 (Sch-80)
148 1 and pipe fittings of the following nominal borewith
clamps including making good the wall, ceiling and
floor, testing all complete as per specification and
direction of the Engineer-in-charge.
20 mm CPVC (sdr-13.5) pipes (Oriplast/Supreme) Mtr 116.00 242.84 28,169.90
25 mm CPVC(sdr-13.5) pipes (Oriplast/Supreme) Mtr 94.00 323.44 30,403.17
152 5 32 mm CPVC sdr-13.5 pipes (Oriplast/Supreme) Mtr 65.00 472.24 30,695.34
153 6 40 mm CPVC sdr-13.5 pipes (Oriplast/Supreme) Mtr 72.00 659.97 47,518.13
154 7 50 mm UPVC sch-80 pipes(Oriplast/Supreme) Mtr 102.00 739.74 75,453.68
20 mm CPVC (sdr-13.5) pipes (Oriplast/Supreme) Mtr 81.00 249.22 20,186.50
25 mm CPVC(sdr-13.5) pipes (Oriplast/Supreme) Mtr 66.00 330.28 21,798.61
158 11 32 mm CPVC sdr-13.5 pipes (Oriplast/Supreme) Mtr 45.00 480.38 21,617.01
159 12 40 mm CPVC sdr-13.5 pipes (Oriplast/Supreme) Mtr 50.00 670.24 33,512.00
160 13 50 mm UPVC sch-80 pipes(Oriplast/Supreme) Mtr 71.00 752.37 53,418.13
supplying all materials, labour, T&P and cutting 0 0.00 0.00 0.00
holes through existing brick work including making
good the damages in cement mortar (1:4) for
taking G.I. Pipes and fittings/ P.V.C. pipes and
fittings etc. all complete as per P.H. specification
and direction of Engineer-in-charge.
162 15 Ground Floor :- 250 mm thick wall Each 35.00 63.72 2,230.20
163 16 First Floor :- 250 mm thick wall Each 23.00 63.72 1,465.56
Supplying all materials, labour, T&P and cutting 0 0.00 0.00 0.00
hole in R.C.C floors, roofs, etc upto 19 cm thick for
passing G.I. Pipes / P.V.C pipes and fittings etc and
164 17 repairing the holes after insertion of pipes etc with
cement concrete (1:2:4 ) including finishing
complete so as to make it leak proof as per
direction of the Engineer-in-charge.
165 18 Ground Floor :- 250 mm thick wall Each 35.00 189.98 6,649.30
166 19 First Floor :- 250 mm thick wall Each 23.00 189.98 4,369.54
Supplying all materials, labour, T&P and cutting 0 0.00 0.00 0.00
167 20 grooves in pucca floors and walls for taking
G.I./P.V.C. pipes and making good the damages as
per direction of the E.I.C.
Supplying all materials, labour T&P and fitting and 0 0.00 0.00 0.00
fixing brass/CP fittings of the following nominal
170 23 bore with supply of all joiniting materials complete
as per specification and direction of the Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing Each 58.00 1209.97 70,178.38
standard sized two way Bib cock of
Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making
good the damages, including cost of all materials
complete as per PH specification complete as per
direction of Er-in-charge. 15mm dia CP Two way
bib cock with Flange Jaquar FLR-5053N.
Supplying all materials, labour, T&P and fixing Each 14.00 4142.74 57,998.42
standard sized Bib cock of
Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making
good the damages, including cost of all materials
complete as per PH specification complete as per
direction of Er-in-charge.15mm dia. nominal bore
Long body Bib Cock Jaquar FLR-5163
Supplying all materials, labour, T&P and fixing Each 136.00 1209.97 1,64,556.19
standard sized 15mm dia angular Stop cock of
Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making
good the damages, including cost of all materials
complete as per PH specification complete as per
direction of Er-in-charge. 15mm dia CP angle stop
cock with wall flange Jaquar FLR-5053N
Supplying all materials, labour, T&P and fixing Each 72.00 1471.22 1,05,928.13
standard sized pillar cock of
Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making
174 27 good the damages, including cost of all materials
complete as per PH specification and direction of
Engineering-in-charge. 15mm dia brass pillar cock
Jaquar Continental Cat. No.- -Jaquar FLR - 5011N
Fixing of 25mm dia Brass / Gun meta ball Valve Each 16.00 960.52 15,368.32
confirming to IS : 781-1995 of approved make as
175 28 per specification complete as per direction of Er-in-
charge.32mm dia brass or gun metal full way valve
Fixing of 32mm dia Brass / Gun meta ball Valve Each 16.00 1207.38 19,318.02
confirming to IS : 781-1995 of approved make as
176 29 per specification complete as per direction of Er-in-
charge.32mm dia brass or gun metal full way valve
Fixing of 40mm dia Brass / Gun meta ball Valve Each 14.00 1563.62 21,890.65
confirming to IS : 781-1995 of of approved make
177 30 as per specification complete as per direction of Er-
in-charge.40mm dia brass or gun metal full way
valve(shakti make)
178 31 15mm dia PVC connection pipe 450 mm long Each 136.00 139.24 18,936.64
179 32 15mm dia CP Extention Nipple Each 136.00 56.25 7,650.40
Providing and fixing circular type stainless steel Each 70.00 108.75 7,612.25
180 33 jalli (grating) with hole for floor /nahani trap etc
complete as per specification and direction of the
Engineer in charge.
Supplying all materials, labour, T&P and fixing 0 0.00 0.00 0.00
Health Faucet of Hindware/Jaquar/Parryware
complete with Chromium plated brass brackets
fixed to wooden plugs with Chromium plated brass
screws as per specification and direction of the
Engineer-In-Charge.
15mm dia CP Health Faucet of Jaquar 1.2mtr long, Each 58.00 2642.50 1,53,264.81
8MM dia Jaquar ALD-577.
Supplying all materials, labour, T&P and fitting and 0 0.00 0.00 0.00
fixing U-PVC SWR soil waste ventilating pipes and
fittings of the following outside diameter
conforming to ISI No 13592/1992 to walls with
nails, bobbins and wooden plugs or laying in
183 36 trenches including jointing with supply of approved
rubber lubricant by non-heat application method/as
per manufacturer's specification, testing, earthwork
in excavation in all kinds of soil and refilling of
trenches as per specification and direction of the
Engineer-In-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
110mm diameter U-PVC SWR pipes(Oriplast type- Mtr 450.00 670.36 3,01,661.10
189 42 110mm U-PVC plain shoe bend Each 58.00 220.07 12,764.06
190 43 110mm U-PVC vent cowl Each 58.00 45.31 2,628.10
192 45 110mm U-PVC plain bend Each 58.00 85.31 4,948.21
193 46 100mm S/S coupling with EPMD Each 50.00 431.05 21,552.70
Supplying all materials,labour T&P and cutting 0 0.00 0.00 0.00
holels through existing brick or laterite masonry
194 47 wall for taking H.C.I pipes and fittings including
making good the damages etc. all complete as per
P.H.Specification and direction of the Engineer-In-
195 48 Charge.
250mm to 375mm thick wall Each 136.00 63.72 8,665.92
Supplying all materials, labour T&P and and fixing 0 0.00 0.00 0.00
12.50 liters/10 liters capacity low level flushing
cistern of Hindware/Jaquar/Parryware with a pair of
cast iron or M.S. brackets complete with fittings
such as siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP brass
handle,unions and couplings for connection with
inlet, outlet and overflow pipes, 32mm dia CP long
flush bend, 15mm dia pvc inlet connection pipe
including cutting holes and making good the same
and connecting the flush bend with cistern and
closet and connceting the inlet pipe with suupply
main etc all complete as per the specification and
direction of the Engineer-in-charge.
10 Liters capacity PVC cistern with 32mm dia flush Each 58.00 1894.49 1,09,880.42
197 50 bend. Hindware sleek fresh single flush Starwhite,
Size 47.6 X 15.5 X 32.5 cm
Supplying all materials, labour, T&P and fixing 0 0.00 0.00 0.00
vitreous china water closet, squatting pan (Indian
type W.C pan/Orissa pattern squatting pan) of
Hindware/Jaquar/Parryware duly embedded in
cement concrete (1:4:8) using 4cm size hard
granite metal including fixing a pair of vitreous
198 51 china 250mm x 130mm x30mm footrest, fixing
100mm dia HCI 'p' or 's' trap (with/without 50mm
dia horn) for water colset squatting pan including
jointing the trap with pan in cement mortar (1:1)
cutting the floor and mending good the damages
etc all complete as per specification and direction of
the Engineer-In-Charge.
Hindware Orissa Pan cat no 20004 Starwhite. Size- Each 12.00 3046.64 36,559.70
Supplying all materials, labour, T&P and fixing the 0 0.00 0.00 0.00
following vitreous china Wash Down Water Closet
(Wall hung European type W.C. pan) of
Hindware/Jaquar/Parryware with integral 'p' or 's'
trap to the floor with wooden plug and chromium
200 53 plated pedestal screws including jointing the trap
with soil pipe in cement mortar (1:1) fixing plastic
seat and cover for wash down water closet with
chromium plated brass hinges and rubber buffers
including polishing etc all complete as per
specification and direction of the Engineer-In-
Wall hung EWC with 'p' / S trap plain FLS-WHT- Each 30.00 12796.04 3,83,881.14
201 54 5351/5201 (S-10) Starwhite type, size-
Supplying all materials, labour, T&P and fixing the 0 0.00 0.00 0.00
following vitreous china Wash Down Water Closet
(European type W.C. pan) of
Hindware/Jaquar/Parryware with integral 'p' or 's'
trap to the floor with wooden plug and chromium
202 55 plated pedestal screws including jointing the trap
with soil pipe in cement mortar (1:1) fixing plastic
seat and cover for wash down water closet with
chromium plated brass hinges and rubber buffers
including polishing etc all complete as per
specification and direction of the Engineer-In-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Hindware slick cat no-20011 (S-28.5/P-18) Each 16.00 5573.38 89,174.02
Starwhite EWC SLICK size-52x36x39 cm
Supplying all materials, labour T&P and fixing wash 0 0.00 0.00 0.00
basins of Hindware/Jaquar/Parryware with hole for
pillar taps with cast iron or M.S.brackets painted
white including cutting holes in walls and making
good the damages with supply of wooden plugs,
screws and cement etc, fixing pedestal for wash
basin recessed at the back for the reception of
pipes and fittings, fixing PVC waste pipe of 32mm
nominal diameter for wash basin including brass
check nut complete, fixing pillar taps capstan head
screw down high pressure lettered 'Hot' and 'Cold'
with long screws, shanks and back nuts of 15mm
dia nominal bore, fixing 15mm dia PVC inlet
connection pipe and making connection with pillar
cocks and supply mains for wash basin, fixing
32mm dia CP brass waste, etc all complete as per
specification and direction of the Engineer-In-
Jaquar wall hung Wash Basin Size - Each 58.00 6810.61 3,95,015.15
205 58 565mmx440x210mm, Cat -no- FLS-WHT-
5801/5301Starwhite.
206 59 Countersunk Wash Basin 0 0.00 0.00 0.00
Supplying all materials, labour T&P and fixing Each 14.00 8071.55 1,13,001.76
counter sunk Wash Basin Size -
207 60 545mmx545x180mm, Cat.No. FLS-WHT-29601 with
all fittings as per direction of the engineer-in -
Supplying all materials, labour, T&P and fixing Flat Each 18.00 7444.15 1,33,994.66
back large pattern urinal of
Hindware/Jaquar/Parryware the following sizes
including connecting the urinal with 32mm dia pvc
waste pipe 910mm long by means of white lead
mixed with chopped hemp, fixing 32mm dia CP
dome waste, 15mm dia CP spreader including
cutting holes in walls land making good the
damages with supply of wooden plugs, screws and
cement etc all complete as per specification and
direction of the Engineer in charge. Hindware Flat
back large urinal cat no-60002 starwhite, Size-
Supply and fixing all materials, labour, T & P and Each 18.00 1877.38 33,792.84
providing urinal partition with italian collection
209 62 (pastel)- size- 75x16.5x36.5 cm Cat no-61005 etc
all complete as per direction of the Engineer-In-
Charge. Make-Hindware.
Supplying all materials, labour, T&P and fixing 0 0.00 0.00 0.00
mirror of superior glass mounted on 6mm thick
210 63 A.C.sheet or plywood sheet and fixed to wooden
plugs with CP screws and washers complete as per
specification and direction of the Engineer-in-
750mmx600mm size B.E.mirror (Alpina/Golden Sqm 32.40 2069.73 67,059.31
Supplying all materials, labour, T&P and fixing 0 0.00 0.00 0.00
standard size glass-shelf of
Hindware/Jaquar/Parryware with CP brass brackets
and guard rails complete fixed to wooden plugs
with CP screws as per specification and direction of
the Engineer-in-charge.
213 66 Jaquar glass shelf ACN-1171 N 600mm long Each 72.00 1808.70 1,30,226.69
Supplying all materials,labour, T&P and fixing 0 0.00 0.00 0.00
standard sized CP towel rail 24" of
214 67 Hindware/Jaquar/Parryware complete with CP
brass brackets fixed to wooden plugs with CP
screws as per specification and direction of the
Engineer-In-Charge
25mmx600mm long CP towel rail (Jaguar make) Each 58.00 1749.23 1,01,455.46
Supplying all materials, labour, T&P and fixing Each 14.00 1453.72 20,352.02
standard sized Chromium Plated brass towel ring
complete with Chromium Plated brass brackets
fixed to wooden plugs with Chromium Plated brass
screws as per specification and direction of the
Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing 0 0.00 0.00 0.00
standard sized Chromium Plated soap case of
Hindware/Jaquar/Parryware complete with
Chromium Plated brass brackets fixed to wooden
plugs with Chromium Plated brass screws as per
specification and direction of the Engineer in charge
218 71 CP soap holder (Jaguar make) ACN-1131N. Each 58.00 903.17 52,383.98
Supplying all materials, labour, T&P and fixing Nos 58.00 978.57 56,757.29
standard sized Robe Hook of
219 72 Hindware/Jaquar/Parryware complete with all as
per specification and direction of the Engineer in
charge. Jaquar Robe hook AGA-BIV-31791
Supplying all materials, labour, T&P and fixing Nos 34.00 2054.38 69,848.92
standard sized Soap Dispensor of
220 73 Hindware/Jaquar/Parryware complete with all as
per specification and direction of the Engineer in
charge. Soap dispense with Glass Bottle. CAN-
Providing and fixing Salem Stainless steel A ISI Nos 4.00 4467.48 17,869.92
(18/8) kitchen sink as per IS : 13983 with C.I.
Brackets and stainless steel plug 40 mm including
221 74 painting of fittings and brackets, cutting and
making good the walls wherever required. a)
Kitchen Sink with drain board Nirali make size 510
X 1040 mm bowl depth 178 mm.
Supplying & fixing of Matrix Set-1 Mat code- Nos 2.00 83647.37 1,67,294.74
70002,EWC : (P-18) (WB 46X36 with one pair
mounting brackets, EWC & cistern complete with
fittings & seat cover, one no hinged rail 76 cm and
4 nos of grab rail 60cm complete with all as per
specification & direction of the Engineer in charge.
Supply all materials, labour, T&P and providing Nos 2.00 102660.00 2,05,320.00
fitting & fixing (Aqua guard) pure Chill 80 PSS UV
of size 750x570x1350 mm height with water
223 76 storage capacity 120 liters along with 2 nos of
fancets 1 for cold water and 1 for normal water
including a flow of 1.5 ltr per minute etc. all
complete as per approved drawing, specification
Supplying all of the EIC. labour, T&P and fixing 100
mm dia wall mounted over head shower & Shower
arm Hindware/Jaquar/Parryware including cutting
the wall and making good the damages, including
cost of all materials complete as per PH
specification and direction of Engineer-in-charge.
100 mm dia CP overhead shower with Arm (Jaquar -
OHS-1989, Jaquar SHA 483)
Supplying all materials, labour, T&P and fixing Each 14.00 3039.33 42,550.56
standard sized 15mm dia Single lever Concealed
Deusch mixer with provision for connection to
overhead shower only of
225 78 Hindware/Jaquar/Parryware of approved make etc
complete including cutting the wall and making
good the damages, including cost of all materials
complete as per PH specification complete as per
direction of Er-in-charge. Concealed stop cock
Fixing Rotational moulded Poly Propelene double 0 0.00 0.00 0.00
layer cylindrical vertical water storage tanks
confirming to IS 12701-1996 including cutting holes
through the tank and fixing mild steel tubes and
226 79 fitting and providing extra sockets and jam nuts,
fixing ball valve etc,including hosting upto a height
of 5 mtr above ground level and placing the tank to
the required postion etc all complete as per
specification and direction of the Er-in-charge.
2000 ltr capacity Double layer cylindrical vertical Each 15.00 26276.07 3,94,141.08
227 80 water storage tanks
228 81 Toilet Portion Civil Works 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and providing 0 0.00 0.00 0.00
anti-skid ceramic tiles in floors, treads and landing
on 20mm thick bed of cement mortar 1:4 (1
cement:4 sand) joined with neat cement slurry
mixed with pigment to match the shades of the
tiles including rubbing and non-polishing complete
as per direction of the Engineer in charge. ( pre-
approved by the Engineer in charge)
Supplying all materials, labour, T&P and fixing 0 0.00 0.00 0.00
provide glazed tiles in dados skirting on 12mm
thick cement plaster (1:3) jointed with neat cement
232 85 slurry mixed with pigments to match the shades of
the tiles including rubbing and polishing complete
as per direction of the Engineer in charge. tile
600x300cm size to be pre-approved by the
233 86 Engineer in
GROUND charge)
Supplying of filling sand in foundation and over 0 0.00 0.00 0.00
areas including watering, ramming, consolidating
235 88 and dressing, labours, tools, taxes etc. all complete
as per the specification and direction of E.I.C.
Providing and laying plain cement concrete 1:3:6 (1 0 0.00 0.00 0.00
cement:3 sand: 6 stone agregate 40mm nominal
237 90 size) as levelling course in foundation and plinth
etc. including tempering, curring, shuttering etc.
complete all depth and height.
Supplying all materials, labour, T&P and providing 0 0.00 0.00 0.00
cement concrete (1:2:4) with 12mm size hard
granite chips including watering, curing,
conveyance of all materials to worksite, payment of
royalty, taxes etc all complete as per specification
and direction of the Engineer in charge
Supplying all materials, labour, T&P and providing 0 0.00 0.00 0.00
Pidifin 2K including conveyance of all materials to
241 94 worksite, payment of royalty, taxes etc all complete
as per specification and direction of the Engineer in
Supplying fitting & fixing of 35mm thick flush door 0 0.00 0.00 0.00
shutters with flush door block board 'A' premium
35mm thick both side teak (Green ply / Allwin)
both side laminated with 4 mm thick veener board
(Teak Heritage) (Archid ply/ Green ply ) by using
244 97 adhesives, with all labour, iron fitting & wooden
hinged cleats etc. fitted & fixed complete in all
respect, including cost of iron fitting , alluminum
fittings, all labours, T&P etc. as per specification
approved by the Department & as per direction of
the E.I.C. SE no 284 dt 27.02.12 for Chief
Supplying all materials, labour, T & P and 0 0.00 0.00 0.00
constructing Gully trap chamber of the following
inside size with 8 cm thick R.C.C. precast cover
slab in CC (1:2:4) mix using 12mm size h.g. chips,
foundation concrete (1:4:8) using 40mm size h.g.
247 100 metal on bed aound trap , Fly Ash brickwork in CM
(1:6) in P&F and inside 12mm thick cement
plastering (1:3) finished with a floating coat of neat
cement including fixing 100mm x100mm size gully
trap, 150mm x150mm C.I gratig etc. all complete
as per aproved drawing, specification and direction
of Engineer-in-charge.
248 101 250mmx250mm with RCC cover Each 13.00 1458.83 18,964.84
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T & P and 0 0.00 0.00 0.00
constructing Inspection chamber of the following
inside size with CC (1:3:6) mix using 40mm size
h.g. metal on bed, Ist class Fly Ash brickwork in CM
(1:6) , moulding and shaping the channel inside
and benching with CC (1:2:4) using 12mm size h.g.
chips, 12mm thick cement plastering (1:3) finished
with punning to inside , cement flush pointing (1:3)
to outside , R.C.C. cover slab in (1:2:4) using
12mm size h.g. chips with RCC man hole cover ,
earth work in excavation in all kinds of soil and
refilling the cavity around the chamber including
watering ,curing, conveyance of all materials to
worksite , payment of royality , taxes etc. all
complete as per aproved drawing , specification and
direction of Engineer-in-charge.
Supplying all materials, labour, T&P and laying in 0 0.00 0.00 0.00
trenches (to level or slope) unplasticized PVC pipes
conforming to IS: 4985/2000 of the following
outside dia for class-3(0.60mpa) including jointing
with supply of approved solvent cement by non-
251 104 heat application method/as per manufacturer’s
specification, providing and laying in trench cement
concrete (1:4:8) with 40mm size hard granite
metal in the Type C-1 standard bedding
surrounding or encasing including concrete for
bedding and curing etc all complete as per PH
specification and direction of the Engineer-in-
252 105 110mm dia u-pvc pipe alround concrete mtr 180.00 1301.66 2,34,298.44
253 106 160mm dia u-pvc pipe alround concrete mtr 180.00 2157.63 3,88,373.40
Supplying all materials, labour, T&P and 0 0.00 0.00 0.00
constructing Man hole chamber of the following size
with cement concrete (1:3:6) using 40 mm size HG
metal on bed , !st class Fly Ash Brick work in CM
(1:6) moulding and shaping the channel inside and
benching with CC (1:2:4) mix using 12 mm size
H.G chips, 12 mm thick cement plaster (1:3) with
254 107 punning to inside, cement flush pointing (1:3) to
outside ,RCC cover slab in (1:2:4) mix using 12
mm size H.G chips with RCC man hole cover , earth
work in all kinds of soil and refilling the cavity
around the camber including watering, curing,
conveyance of all materials to worksite payment
of royalty, taxes etc. all completed as per approved
drawing, specification and direction of Engineer-in-
255 108 charge.size 900mmx900mmx900mm
256 109 addl depth of 0.30m upto 4.50m depth each 5.00 2051.08 10,255.38
Supplying all materials, labour, T&P and 0 0.00 0.00 0.00
constructing soakway pit of the following size with
precast RCC rings joined loose, gravel backing in
the rear of well steining, precast RCC cover slab in
cement concrete (1:2:4) using 12mm size hg chips
fitted with iron lifting handles including cutting hole
257 110 in the rings for inlet pipe,earthwork in open well
excavation in all kinds of soil and refilling of cavity
around the pit & painting the iron works, watering,
curing, conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as per
approved specification and direction of the Engineer-
258 111 RCC rings soakway pit 1.8m dia x 2.6m deep each 2.00 23475.16 46,950.31
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Labour for drilling a perfectly vertical bore hole of 0 0.00 0.00 0.00
specified dia for a specified depth below ground
level through consolidated and unconsolidated rock
with down the hole hammer drilling rig or
combination rig as required to suit the site
condition as per the direction of the Engineer in
charge including use of own rig with its accessories,
tools and plant and consumables etc for lowering of
200mm/150mm dia G.I/P.V.C/M.S casing pipes for
housing fitted with socket and with or without well
screen as per the necessity for soft, medium, hard
and boulder formation (G.I/ P.V.C/ M.S casing pipes
if required to prevent collapse of overburden is to
be provided by the contractor including lowering
and withdrawing after completion of the tube well),
200mm dia to 400mm dia in overburden portion
including packing of gravel supplied by the
contractor for 400mm dia bore only
260 113 Drilling of 200mm dia bore 0 0.00 0.00 0.00
263 116 Drilling of 150mm dia bore 0 0.00 0.00 0.00
Lowering the following size of G.I/P.V.C/M.S 0 0.00 0.00 0.00
housing pipes with or without slotted pipes as per
the necessity from ground level up to 45.00m depth
and fitted and fixed up in perfectly vertical position
265 118 including cutting and threading of pipes and slotted
pipes and supplying and fixing all jointing
materials, tools and plant etc all complete and
keeping the top of casing pipe threaded including
plugging tube wells to prevent entry of foreign
266 119 Lowering of 200mm dia P.V.C casing pipes 0 0.00 0.00 0.00
Supplying polyvinyl chloride pipes as per ASTM-D- 0 0.00 0.00 0.00
1785-89 having threads in accordance with DIN
2999 part-1/DIN-42225 part-II specification length
of pipe (laying length) will be 3 mtrs. The pipes
shall be supplied with both external and threaded
with free socket. The pipe having external thread at
one end i.e female and or belled end. The female
269 122 end having internal thread is to be belled in order
to accept the male end while jointing pipes with a
bore threading shall be provided with a greave at
the roof of the male thread accomodate flexible
PVC/Rubber 'O' ring to make the joint water tight
colour of the pipe shall be blue. The name of the
manufacture along with batch No class of pipe shall
be stranded legibly of each pipe length.
Supplying all materials, labour, T&P and providing Each 1.00 931.96 931.96
and providing sanitary sealing by cement concrete
grouting of annular space around GI/PVC/MS
housing pipe upto 5m below ground level (as per
drawing) to plug the bore hole excluding cost of
271 124 cement all complete as per direction of the
Engineer in charge. Minimum one metre of casing
pipe to be inserted in the bore into the rock at the
bottom to ensure sanitary sealing (excluding cost of
cement which will be supplied directly by the
Cleaning and developing the tube well with supply 0 0.00 0.00 0.00
of compressor worked till clear and adequate
272 125 discharge is obtained from the tube well including
supply and use of all necessary equipment and
labour as per direction of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and providing, 0 0.00 0.00 0.00
fitting and fixing submersible pump with squirrel
cage induction type submersible type submersible
electric motor to run on 3 phase/1 phase line
voltage ranging from 320 volt to 450 volt
conforming to IS: 8034/89 with following
274 127 specifications with suitable control panel, jointing
with GI/PVC/HDPE pipes, electrification, testing,
commissioning, trial running, conveyance of all
materials to worksite, payment of taxes etc all
complete as per specification and direction of the
Engineer in charge (Texmo/Crompton
Greaves/Kirloskar make)
1 H.P. Single phase/ three phase 3 stage head Each 2.00 19749.90 39,499.79
275 128 renge of 20 to 35 mtr with discharge capasity 145
to 110 L.P.M With outlet dia 25 mm (keeping 100%
276 129 DOL Control panel Each 1.00 4490.49 4,490.49
277 130 40mm dia steel short piece Each 1.00 179.71 179.71
279 132 50mm size CI bracket Pair 1.00 107.73 107.73
281 134 20mm dia rigid UPVC pipes Mtr 35.00 8.14 284.97
282 135 Steel rope with cover Mtr 35.00 31.51 1,102.71
Labour charges for lowering including Each 1.00 2360.00 2,360.00
Supplying all materials, labour, T&P and providing 0 0.00 0.00 0.00
and fixing to wall or ceiling and floor HDPE pipes
and pipe fittings conforming to IS: 4984/2000
(10kgf/sqcm) of the following nominal bore with
clamps and jointing by Fusion welding method
including testing, making good the wall, ceiling
and floor all complete as per specification and
direction of the Engineer in charge
285 138 32mm HDPE pipes (Finolex/Supreme make) mtr 85.00 117.76 10,009.94
Earthwork in excavation in all types of soil for site 0 0.00 0.00 0.00
leveling, foundation, pits, trenches and other civil
works up to and including 1.5 metre lift and
286 139 stacking the soil upto a lead of 100 metre and
including dewatering, removing slush, shoring and
strutting (as required), complete as per
specification and as directed by the Engineer-In-
287 140 Charge. TANK
Filling at all depth with available excavated earth 0 0.00 0.00 0.00
(excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 15 cm in
depth : consolidating each deposited layer by
ramming and watering complete (lead upto 100m)
as directed by the Engineer-In-charge.
Supplying of filling sand in foundation and over 0 0.00 0.00 0.00
areas including watering, ramming, consolidating
290 143 and dressing, labours, tools, taxes etc. all complete
as per the specification and direction of E.I.C.
Providing and laying plain cement concrete 1:3:6 (1 0 0.00 0.00 0.00
cement:3 sand: 6 stone agregate 40mm nominal
292 145 size) as levelling course in foundation and plinth
etc. including tempering, curring, shuttering etc.
complete all depth and height.
Supplying all materials, labour, T&P and providing 0 0.00 0.00 0.00
cement concrete (1:2:4) with 12m size hard broken
granite chips including watering, curing,
conveyance of all materials to worksite, payment of
royalty, taxes etc all complete as per specification
and direction of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying Reinforced 0 0.00 0.00 0.00
cement concrete of M-250 grade as per approved
designs and drawings having a minimum
compressive strength (in work test) 250 Kg. /
Square cm. in 15 cm. cubes at 28 days after mixing
and test conducted in accordance with I.S. 516
using 12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved quality
from approved quarry, washed and cleaned (
20mm. size chips not to exceeds 25 % ) to be
mixed in concrete mixture with Portland slag
cement (PSC) including hoisting, lowering, laying
296 149 and compaction concrete by using vibrators,
watering and curing for 28 days, centering and
shuttering then after dismantling and removing
debris from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T & P
required of the work etc. complete in all respect as
directed by the Engineer-in-Charge. But excluding
cost and conveyance of M.S. rods or Tor steel and
binding wires and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor steel tying
the grills and placing in proper position.
Supplying, straightening, cutting, bending, placing 0 0.00 0.00 0.00
in position and binding reinforcement steel work in
RCC/reinforced brick works as per drawing and
specification including preparation of respective bar
bending schedule and binding (Binding wire to be
used as per the IS code) etc. all complete as per
direction of Engineer-In-Charge.Cold Twisted bars,
Thermo-Mechanically-treated bars.
First class Fly Ash Brick masonry using F.A. bricks 0 0.00 0.00 0.00
of size 25 cm. x 12 cm. x 8 cm. having crushing
strength not less than 75 kg. Per. Sqr. Cm. in
cement mortar of mix( 1:6) with ordinary Portland
slag cement(PSC) and screened & washed sand for
mortar after immersing the bricks for 6 (Six) hours
303 156 in water before use in Foundation & Plinth including
splays cutting, circular moulding, corbelling,
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and taxes
of all materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc. complete
304 157 in all respect
SEPTIC TANK as directed by the Engineer-in- Cum 2.41 4972.52 11,963.88
12mm cement plaster on internal smooth side of 0 0.00 0.00 0.00
RCC/brick surfaces with cement mortar of mix 1:4
305 158 (1 cement : 4 fine sand) including neat cement
punning & necessary scaffolding, curing etc. all
complete at all floors and all heights.
Providing 16mm. thick cement plaster in all floors 0 0.00 0.00 0.00
at all height with cement mortar of mix (1:6) with
OPC 53 grade cement finished smooth to inside
smooth surface of brick masonry walls after racking
out the joints including watering and curing,
307 160 rounding of corners etc. complete with cost,
coveyance, loading and unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T&P and scaffolding required for the work
etc. complete in all respect as desired by the
Engineer in charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and providing , 0 0.00 0.00 0.00
fitting & fixing 100mm x100mm x100 mm SW Tee
in wall including filling the recess with cement
concrete (1:3:6) with 12mm size h.g chips all
complete including watering, curing, conveyance of
all materials to worksite, payment of royalty all
complete as per specification and direction of the
Engineer in charge
Supplying all materials ,labour, T&P and making MS 0 0.00 0.00 0.00
STEP IRON IN 20MM diameter MS steel bars &
311 164 fixing into walls of man hole/septic tank duly
embedded in cement concrete (1:3:6) complete as
per specification and direction of the Engineer in
312 165 charge.
SEPTIC TANK Each 10.00 208.03 2,080.34
313 0 Sub-Total of Plumbing Works 0 0.00 0.00 78,43,305.83
314 0 Electrical Works 0 0.00 0.00 0.00
Recessed wiring to light point / first light of group 0 0.00 0.00 0.00
control/ call bell point/ exhaust fan point /wall fan
point with 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor of ISI marked in 20
mm dia non-metalic PVC conduit with 6 Amp, 250
V clip in type switch ISI marked and ceiling rose
ISI marked mounted on G.I modular box with face
plate & cover of suitable size , with 1.5 sq.mm FR
PVC insulated single core multistrand copper
conductor as earth wire including all accesories and
connection as per direction of Engineer in Charge.
(Make of wire Finolex /Polycab/ Anchor /
Havels/Eq.) (Make of modular box,cover,switch &
socket-Legrand Myrios/schneider opale/Eq.)
Recessed wiring to secondary light point looped Nos. 150.00 467.28 70,092.00
from primary light point with 1.5sqmm FR PVC
insulated single core multistrand copper conductor
of ISI marked with 20mm dia non-metallic PVC
conduit with 1.5sqmm FR PVC insulated single core
multistrand copper conductor for running earth
including 3 plate ISI marked Ceiling rose with all
accessories & connection as per direction of
Engineer-in-charge. (Make of wire Finolex /Polycab/
Anchor / Havels/Eq.) Average Length: 3 mtr
Recessed wiring to ceiling fan point with 1.5sqmm Nos. 129.00 1672.06 2,15,695.74
FR PVC insulated single core multistrand copper
conductor of ISI marked with 20mm dia non-
metallic PVC conduit with 6Amp 250V Modular
Switch,Stepped type Moudular Regulator, Base &
Cover with 1.5sqmm FR PVC insulated single core
multistrand copper conductor for running earth
including all accessories & connection as per
direction of Engineer in charge. (Make of wire
Finolex /Polycab/ Anchor / Havels/Eq.) Group B
Recessed wiring to Twin control light point with 1.5 Nos. 10.00 1725.16 17,251.60
sq.mm FR PVC insulated single core multistrand
copper conductor of ISI marked in 20 mm dia non-
metalic PVC conduit with 6Amp, 250 V clip in type
2way switch ISI marked and ceiling rose ISI
319 5 marked mounted on G.I modular box with face
plate & cover of suitable size , with 1.5 sq.mm FR
PVC insulated single core multistrand copper
conductor as earth wire including all accesories and
connection as per direction of Engineer-in-charge.
(Make of wire Finolex /Polycab/ Anchor /
Havels/Eq.) Group C
Recessed wiring for 5 / 6 amp socket outlet with Nos. 145.00 697.59 1,01,150.90
6Amp, 250 V clip in type modular switch ISI
320 6 marked mounted on G.I moular box with face plate
& cover of suitable size including all accesories and
connection on same switch board as per direction of
Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Recessed wiring for 5 / 6 amp socket outlet with 2 Nos. 10.00 1633.29 16,332.85
x 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor of ISI marked in 20
mm dia non-metalic PVC conduit with 6Amp, 250 V
clip in type switch ISI marked mounted on G.I
321 7 moular box with face plate & cover of suitable size ,
with 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire
including all accesories and connection on separate
board as per direction of Engineer-in-charge.(Make
of wire Finolex /Polycab/ Anchor / Havels/Eq)
Recessed wiring for 2 x 6 amp socket outlet Nos. 100.00 1293.54 1,29,353.96
controlled by 2 nos 6Amp, 250 V clip in type
switch ISI marked mounted on single G.I moular
box with face plate & cover of suitable size
including all accesories and connection on separate
board as per direction of Engineer-in-charge.
Recessed wiring for 6 pin 16 amp socket outlet Nos. 45.00 929.84 41,842.80
with 16Amp, 250 V clip in type switch ISI marked
mounted on G.I moular box with face plate & cover
of suitable size including all accesories and
connection as per direction of Engineer-in-charge.
25Nos for Stage Light,3Nos For Aquaguard.
Recessed wiring for A.C/ Power socket outlet with Nos. 30.00 1137.52 34,125.60
industrial type socket outlet, plug top and metal
324 10 chained cover in sheet steel enclosure ,20A/32A SP
MCB including all accesories and connection as per
direction of Engineer-in-charge.
Recessed wiring to exhaust fan/Wall Fan point with Nos. 55.00 1209.50 66,522.50
1.5sqmm FR PVC insulated single core multistrand
copper conductor of ISI marked with 20mm dia non-
metallic PVC conduit with 6Amp 250V Modular
325 11 Switch, Base & Cover with 1.5sqmm FR PVC
insulated single core multistrand copper conductor
for running earth including all accessories &
connection as per direction of Engineer in charge.
(Make of wire Finolex /Polycab/ Anchor /
Recessed wiring for 3 x 6 amp socket outlet Nos. 2.00 1248.44 2,496.88
controlled by 2 nos 6Amp, 250 V clip in type
switch ISI marked mounted on single G.I moular
box with face plate & cover of suitable size
including all accesories and connection on separate
board as per direction of Engineer-in-charge.
Recessed wiring to submain in 4 x 16 sq.mm FR Mtrs 150.00 808.30 1,21,245.00
PVC insulated single core multistrand copper
conductor of ISI marked confirming to IS-694/1990
in 50 mm dia non-metalic heavy duty PVC conduit
1.6 mm thick along with 2 x 10 sq.mm FR PVC
insulated single core multistrand copper conductor
as earth wire as equired. (Make of wire Finolex
/Polycab/ Anchor / Havels/Eq.)
Recessed wiring to submain in 4 x 10 sq.mm FR Mtrs 150.00 534.54 80,181.00
PVC insulated single core multistrand copper
conductor of ISI marked confirming to IS-694/1990
in 40 mm dia non-metalic heavy duty PVC conduit
1.6 mm thick along with 2 x 6 sq.mm FR PVC
insulated single core multistrand copper conductor
as earth wire as equired. (Make of wire Finolex
/Polycab/ Anchor / Havels/Eq)
Recessed wiring to submain in 4 x 6 sq.mm FR PVC Mtrs 0.00 0.00 0.00
insulated single core multistrand copper conductor
of ISI marked confirming to IS-694/1990 in 32 mm
dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 2 x 4 sq.mm FR PVC insulated
single core multistrand copper conductor as earth
wire as equired. (Make of wire Finolex /Polycab/
Anchor / Havels/Eq)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Recessed wiring to submain in 2 x 6 sq.mm FR PVC Mtrs 500.00 238.36 1,19,180.00
insulated single core multistrand copper conductor
of ISI marked confirming to IS-694/1990 in 25 mm
dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 1 x 4 sq.mm FR PVC insulated
single core multistrand copper conductor as earth
wire as equired. (Make of wire Finolex /Polycab/
Anchor / Havels/Eq)
Recessed wiring to submain in 2 x 4 sq.mm FR PVC Mtrs 650.00 198.24 1,28,856.00
insulated single core multistrand copper conductor
of ISI marked confirming to IS-694/1990 in 20 mm
dia non-metalic heavy duty PVC conduit 1.6 mm
thick along with 1 x 2.5 sq.mm FR PVC insulated
single core multistrand copper conductor as earth
wire as equired. (Make of wire Finolex /Polycab/
Anchor / Havels/Eq)
Recessed wiring to submain in 2 x 2.5 sq.mm FR Mtrs 2500.00 210.25 5,25,631.00
PVC insulated single core multistrand copper
conductor of ISI marked confirming to IS-694/1990
in 20 mm dia non-metalic heavy duty PVC conduit
1.6 mm thick along with 1 x 1.5 sq.mm FR PVC
insulated single core multistrand copper conductor
as earth wire as equired. (Make of wire Finolex
/Polycab/ Anchor / Havels/Eq)
Recessed wiring to submain in 2 x 1.5 sq.mm FR Mtrs 300.00 190.76 57,227.64
PVC insulated single core multistrand copper
conductor of ISI marked confirming to IS-694/1990
in 20 mm dia non-metalic heavy duty PVC conduit
1.6 mm thick along with 1 x 1.5 sq.mm FR PVC
insulated single core multistrand copper conductor
as earth wire as equired. (Make of wire Finolex
/Polycab/ Anchor / Havels/Eq) (For Switch Board
Supply and fixing of following way three pole and 0 0.00 0.00 0.00
neutral, sheet steel, MCB distribution, 415 V on
surface / recess, complete with tinned copper bus
bar, neutral bus bar, earth bar, din bar, hinged
front acrylic cover for the MCB knobs detachable
335 21 gland plate, interconnections, phosphatized and
powder painted including earthing etc. as required
wih necessary MCB , RCCB / ISOLATORS as
required.Note for MCB- There should be colour
indication for tripping On ,Off & Trip/There should
be mid trip position for toggles for electrical fault
Supply, fixing, erecting, connecting and Nos. 8.00 16950.70 1,35,605.60
commissioning of indoor type dust and vermin
proof, sheet steel clad ready made, double door
horizontal type powder coated wall mounted 6 way
TPN Distribution Boards For PDB suitable for 440 V,
three phase, 4 wire 50 Hz AC Supply complete
with bottom detachable plate for interconnections
etc as below.Incommer 1 No-63A FP MCB (10KA)
Outgoings-16/20A SP MCB 10KA-18Nos.(Make-L&T/
Schneider/Legrand/eq) .
Supply, fixing, erecting, connecting and Nos. 8.00 13935.80 1,11,486.40
commissioning of indoor type dust and vermin
proof, sheet steel clad ready made, double door
horizontal type powder coated wall mounted 4 way
TPN Distribution Boards For LDB suitable for 440 V,
three phase, 4 wire 50 Hz AC Supply complete
with bottom detachable plate for interconnections
etc as below.Incommer 1 No-40A 4P MCB (10KA)
Outgoings-6 A SP MCB 10KA- 12 Nos,(Make-L&T/
Schneider/Legrand/eq) For LDB .
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supply, fixing, erecting, connecting and Nos. 2.00 27725.28 55,450.56
commissioning of indoor type dust and vermin
proof, sheet steel clad ready made, double door
Vretical type powder coated wall mounted 4 way
VTPN Distribution Boards For FLDB suitable for 440
V, three phase, 4 wire 50 Hz AC Supply complete
with bottom detachable plate for interconnections
etc as below.Incommer 1 No-63A 4P MCB (10KA)
Outgoings-40 A TP MCB 10KA- 4 Nos,(Make-L&T/
Schneider/Legrand/eq) For FLDB .
Supply, fixing, erecting, connecting and Nos. 2.00 35201.76 70,403.52
commissioning of indoor type dust and vermin
proof, sheet steel clad ready made, double door
Vretical type powder coated wall mounted 4 way
339 25 VTPN Distribution Boards For FPDB suitable for 440
V, three phase, 4 wire 50 Hz AC Supply complete
with bottom detachable plate for interconnections
etc as below.Incommer 1 No-100A 4P MCCB
(25KA) Outgoings-63 A TP MCB 10KA- 4 Nos,(Make-
L&T/ Schneider/Legrand/eq) For FPDB .
Supply, installation,testing & commissioning of floor 0 0.00 0.00 0.00
mounting front operated front access extensible
type cubicle panel totally enclosed, dust and vermin
proof with IP-42 /55 protection with hinged and
lockabale doors.CRCA sheets including
interconnections,tinned copper crimping lugs,
bonding to earth and painting suitable for use at
415 V, 3phase 4 wire 50 Hz system, and to
withstand a fault level of 35 KA symmetrical for 1
340 26 sec at 415 V complete as per specifications, as
required and as below : All switchboards shall have
provision for entry of cables from the bottom as
required. All live accessible parts shall be shrouded
and all equipment shall be finger touch proof. The
bus bars shall be insulated with heat shrinkable
sleeves.SMC/DMC shrouds and busbar supports
shall be used with Indication lamp, C.T , Digital
Voltmeter, Digital Ammeter and control fuse etc.
complete.MAKE- Legrand / Schneider/
MAIN PANEL with 400A 4P Change over Switch set 1.00 442802.08 4,42,802.08
,400A 4P MCCB 50KA -1 No as incomer, 100A 4P
MCCB 16KA- 4Nos,200A 4P MCCB 36KA-2Nos &
200 A 4P Change over switch-1Nos,80A 4P MCB
10KA- 4Nos, 63 A 4P MCB 10KA -5Nos, with E.C
Busbars with 4nos 65KA VSD along with 4nos 32A
342 28 incomer ,32A 4P MCB 10KA-2Nos, 20A DP MCB
10KA-3 Nos as Outgoing with E.C Busbars .
EXT Light DB with 63A 4P MCB (10KA) -1 No as set 1.00 32243.50 32,243.50
343 29 incomer, 1Nos Timer Switch ,20A SP MCB 10KA-18
Nos as Outgoing with E.C Busbars .
LIFT DB with 63A 4P MCB (10KA) -1 No as set 1.00 23384.06 23,384.06
344 30 incomer ,40A 4P RCCB 100MA -1Nos, 10A SP MCB
10KA-6 Nos as Outgoing with E.C Busbars .
Supply & Laying of one number of PVC insulated Rmt 75.00 1698.02 1,27,351.50
and PVC seathed / XLPE power cable of 1.1 KV
grade of 3.5core 240 sq.mm direct in ground
including excavation , sand cushining protective
covering and refilling the trench etc. as
required.(Make-polycab/RR Kable/Rhino cable)
Supply &Laying of one number of PVC insulated and Rmt 75.00 1347.84 1,01,088.24
PVC seathed / XLPE power cable of 1.1 KV grade of
150 3.5core sq.mm direct in ground including
excavation , sand cushining protective covering and
refilling the trench etc. as required.(Make-
polycab/RR Kable/Rhino cable)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supply & Laying of one number of PVC insulated Rmt 50.00 791.78 39,589.00
and PVC seathed / XLPE power cable of 1.1 KV
grade of 95 3.5core sq.mm direct in ground
including excavation , sand cushining protective
covering and refilling the trench etc. as
required.(Make-polycab/RR Kable/Rhino cable)
Supply &Laying of one number of PVC insulated and Rmt 120.00 355.18 42,621.60
PVC seathed / XLPE power cable of 1.1 KV grade of
349 35 4 core 16 sq.mm Aluminium on surface as
required.(Make-polycab/RR Kable/Rhino cable)
Supplying and making end termination with brass 0 0.00 0.00 0.00
compression gland and aluminum lugs for following
350 36 size of PVC insulated and PVC sheathed / XLPE
aluminum cable of 1.1 KV as required.
Earthing with copper earth plate 600 mm x 600mm Set 8.00 5784.36 46,274.88
x 3.15 mm thick ISI marked including accessories
355 41 and providing masonary with cover plate having
loccking arrangement and watering pipe etc with
charcoal and salt as required.
Supplying and laying 25 mm x 6 mm CU earth strip Rmt 80.00 565.22 45,217.60
356 42 ISI marked at 0.5 meter below ground level as strip
earth electrode including soldering etc. as required.
Supplying and laying 25 mm x 6 mm CU earth strip Rmt 80.00 605.34 48,427.20
357 43 ISI marked on surface or in recess for connection
etc as required.
Providing and fixing 8 SWG CU wire on surface or in Rmt 200.00 69.62 13,924.00
recess for loop earthing as required.
359 45 Lightning Arrester. 0 0.00 0.00 0.00
Supply & fixing of lightning arrester of size 2.6' Nos 6.00 356.36 2,138.16
length made of 0.5"diameter copper rod, over
360 46 which 5nos 5" length pointed copper rods of 0.3"
diameter with suitable size of nuts and bolts.
Supplying and laying 25 mm x 6 mm CU earth strip Rmt 380.00 605.34 2,30,029.20
361 47 ISI marked on surface or in recess for connection
etc as required.
Earthing with copper earth plate 600 mm x 600mm Set 6.00 5784.36 34,706.16
x 3.15 mm thick ISI marked including accessories
362 48 and providing masonary with cover plate having
loccking arrangement and watering pipe etc with
charcoal and salt as required.
Supply, Installation, Testing and Commissioning of 0 0.00 0.00 0.00
pre-wired fluorescent fiiting / compact fluorescent
fitting /LED fitting of all sizes complete with all
accessories and lamp etc. directly on ceiling /wall
or recessed in false ceiling , including connection
with 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor and earthing as
required.Make-JAQUAR/philips/wipro/Equivalant.
364 50 Ceiling mounted LED 18W Round Surface light. Nos 150.00 1211.86 1,81,779.00
365 51 Ceiling/ Wall mounted type 9W BULK HEAD Nos 10.00 1182.36 11,823.60
Luminaire Fittings.
Ceiling mounted indoor type batten type LED Nos 270.00 572.30 1,54,521.00
22W Luminaire with LED Lamp.
Supply, Installation, testing and commissioning of Nos 30.00 488.52 14,655.60
10W Mirror Light Fittings.
Supply & fixing of LED 36w 2'x2' Surface Mounted Nos 52.00 4273.96 2,22,245.92
Light Fittings .
Supply, Installation, Testing and Commissioning of Nos 111.00 2592.46 2,87,763.06
ceiling fan 1200mm sweep, including wiring the
369 55 down rods of standard length (upto 30 cm) with 1.5
sq.mm FR PVC insulated single core multiatrand
copper conductor etc. as required.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation, testing and commissioning of Nos 55.00 1867.94 1,02,736.70
exhaust fan of 300 mm sweep 900 rpm in the
370 56 existing opening, including making the hole to suit
the size of the above fan, making good the damage
complete, connection, etc as required.
Supply, Installation, testing and commissioning of Nos 16.00 7891.84 1,26,269.44
70W High Bay light Fittings.
Supply & fixing of 8W LED Bollards light Fittings. Nos 18.00 7711.30 1,38,803.40
Supply and installation of Pregalvanised Perforated 0 0.00 0.00 0.00
type cable trays without cover. The rate shall
include bends, Tees, all supporting brackets, anchor
fasteners, screws, bolts, nuts etc., including
painting of cable trays. Thickness of sheet steel
shall be 2 mm. Support sizes similar to ladder type
Size of Cable Tray :300 mm x 50 mm Rmtr 70.00 916.86 64,180.20
375 61 Size of Cable Tray :150 mm x 50 mm Rmtr 50.00 710.51 35,525.67
Supplying and fixing of clip in type modular Nos 30.00 450.76 13,522.80
Telephone socket ISI marked mounted on G.I
376 62 modular box with face plate & cover of suitable size
,including all accesories and connection as per
direction of Engineer in Charge.
Supplying and fixing of clip in type modular T.V. Nos 10.00 462.56 4,625.60
antenna socket ISI marked on mounted on G.I
377 63 modular box with face plate & cover of suitable size
, including all accesories and connection as per
direction of Engineer in Charge.
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC Rmt 500.00 53.10 26,550.00
378 64 insulated coper conductor, unarmoured telephone
cable in existing surface / recessed PVC conduit as
Recessed wiring to television point with cable RG-6 Rmt 150.00 47.20 7,080.00
grade, 0.7 mm solid copper conductor PE insulated
379 65 shielded with fine tined copper braid and protected
with FR PVC sheath in in existing surface / recessed
PVC conduit as required as per direction of Engineer
in Charge. and fixing of following sizes PVC conduit
Supplying 0 0.00 0.00 0.00
along with accessories in recessed wiring including
380 66 cutting the wall and making good the same in case
of recessed conduit as required.
Supplying and fixing of 16 / 18 SWG metal box of Nos 2.00 212.40 424.80
200 mm x 150 mm x 60 mm deep on surface /
recess with suitable size of phenolic laminated
sheet cover in front including cutting the wall and
making good the same in case of recessed conduit
Supplying Box)
& Commissioning of Telephone Hand Set. Nos 30.00 866.12 25,983.60
Supplying & installation of 10 pair KRONE make set 2.00 1098.58 2,197.16
moudles with locking & key arrangements
384 70 fabricated with MS sheet & powder coated to be
fixed on concealed manner incl. good the damages.
Supply and installation of Rubber Mats 12mm thick Nos 4.00 4130.00 16,520.00
385 71 of size 2000mm x 1000mm x 12 mm thick Electrical
tested with test certificate.
Supply and fixing of fire buckets with angular set 4.00 1770.00 7,080.00
386 72 fabricated stand to fix 4 buckets in each stand for
Electrical fire protection as per standards of
Electrical Inspectorate.
Supply and fixing of Co2 fire extinguisher with Nos 4.00 8850.00 35,400.00
mounting clamps with pressure test certificate .
Supply and fixing of shock treatement charts duly set 3.00 767.00 2,301.00
388 74 laminated along with separate colour single line
diagram laminated, to be fixed in Electrical control
Supply and fixing of first aid box with medicines set 1.00 1770.00 1,770.00
389 75 complete with medicine with three years expiry
date to be fixed in Electrical control panel room.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supply & delivery of 200-KVA silent DG sets along set 1.00 2188900.00 21,88,900.00
with engine-alternator, Control panel containing 1
No 350-A, 4P MCCB & required protections and
metering arrangement (in tamper proof
compartment with locking arrangement) with 5-A
digital KWH meter & CTs for DG set, etc as required
, acoustic enclosure, diesel tank, residential
silencer and complete as required as per the
technical specification and as per direction of
Engineer-in-charge.
Installation, testing and commissioning of 200-KVA set 1.00 59000.00 59,000.00
silent DG sets along with engine-alternator, Control
panel containing 1 No 350-A, 4P MCCB & required
protections and metering arrangement (in tamper
391 77 proof compartment with locking arrangement) with
5-A digital KWH meter & CTs for DG set, etc as
required , acoustic enclosure, diesel tank,
residential silencer and complete as required as per
the technical specification and as per direction of
Engineer-in-charge.
1 No 3 phase 4 wire 5amp CT operated digital KWH set 1.00 20650.00 20,650.00
meter in tamper proof enclosure with locking and
392 78 sealing arrangement along with suitable bus bar
arrangement,for mounting of C.T's & 350/5-A CTs,
cable termination arrangement complete as
393 0 required Sub-Total of Electrical Works 0 0.00 0.00 76,26,352.98
394 0 Firefighting Works 0 0.00 0.00 0.00
Supplying, installing testing and commissioning of No. 1.00 325261.10 3,25,261.10
electrical motor driven Main Pump of horizontal
centrifugal end suction backpull out type with gland
packing and capable to deliver 1620LPM (96 m³/
Hr) at 70 MWC with all necessary accessories like
bronze impeller, stainless steel shaft along with
anti-vibration mounting, coupling, coupling guard
and base plate for pump, fabricated mild steel
395 1 channel,foundation bolts, and pump should have
the dry run sensor provision, etc., as per local fire
brigade requirement . The pump shall capable to
have 3.5 kg/cm² residual pressure at top most
hydrant point. The pump shall be coupled to
electrical motor with speed of 2900 RPM, Electric
supply 415V, 50 Hz and complete set shall be
mounted on a common base frame. The quoted rate
shall includes providing & fixing of coupling,
coupling gaurd and Foundation bolts etc.
Supplying, installing and commissioning of Diesel No. 1.00 517866.60 5,17,866.60
Engine driven common stand by pump, horizontal
centrifugal end suction backpull out radiator cooling
type with gland packing and capable to deliver
1620 LPM (96 m³/ Hr) at 70 MWC with all
necessary accessories like bronze impeller,
stainless steel shaft along with anti-vibration
mounting, coupling, gear box, base plate for pump,
fabricated mild steel channel with foundation bolts
etc., It includes providing and fixing fuel oil tank
396 2 (capacity as perTAC requirements) with supports
and necessary pipe works for diesel engine, battery
and battery charger to be connected to control
panel of diesel engine and exhaust silencer
including necessary pipe work and lagging, pump
should have the dry run sensor provision, etc., and
shall be automatic in operation with diesel engine
control diesel engine control panel with 24V DC
storage battery & its battery charger with required
Ampere - hour rating, terminal box (2 nos. of
12volts), as per TAC including all associated
electrical works.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying, installing and commissioning of No. 1.00 141423.00 1,41,423.00
electrical motor driven Jockey pump of horizontal
centrifugal end suction backpull out type with gland
packing and capable to deliver 180LPM (10.8 m³/
Hr) at 70 MWC with all necessary accessories like
bronze impeller, stainless steel shaft along with
anti-vibration mounting pad and flexible
connections at discharge end of the pipes, pump
should have the dry run sensor provision etc. and
shall be automatic in operation.The pump shall be
coupled to motor of with speed of 2900RPM and
complete set shall be mounted on common base
frame. The quoted rate shall includes providing &
fixing of coupling, coupling gaurd and Foundation
bolts etc.installation, testing and commissioning of
fire control panel metal clad type suitable for 415 V
AC three phase 4 wire 50Hz supply system. The
panel shall be suitable for automatic operation of
the fire pumps as per the specified parameters.
398 4 The panel shall be completely compartmentalised
and complete with relays, contactors, starters,
Aluminium Bus Bars, designation labels as per
requirement, continuous earth bar, panel
separators, protective screens, cable clamping
support system, top/bottom cable gland plates for
incoming and out going cable entries.
Supplying, laying, testing & commissioning of 0 0.00 0.00 0.00
FRLS, XLPE insulated, PVC outer sheateh, steel
armoured, aluminium / copper conductor, 1100v
grade power cables with glands etc. The cables
shall be laid in tray / Hume pipe / in trenches/on
walls/ floor etc. as required. For cables laid out
door the rate shall include earth excavation
providing brick and sand protection, refilling and
399 5 compacting the earth.The rate shall excludes tray &
Hume pipes. The quoted rate shall includes the end
termination for 1.1KV cables with double
compression type cable gland and heavy duty
tinned copper cable sockets as per the relevant IS
standards. Rate shall be inclusive of all sundry
materials like adhesive tape , PVC sleeves , bolts
and nuts, washers etc. including plugging unused
holes. Above 10 mm² shall be aluminium conductor
type. The minimum size of the cables shall as
400 6 a)3 core x 35 sqmm Aluminium conductor cable Rmt 50.00 501.50 25,075.00
b) 3 core x 10 sqmm Aluminium conductor cable Rmt 25.00 246.62 6,165.50
404 10 e) 3 core x 6 sqmm Aluminium conductor cable Rmt 60.00 224.20 13,452.00
Supplying and fixing of perforated G.I.sheet cable Rmt 80.00 587.64 47,011.20
tray with neccessory angle iron suspension
405 11 supports, anchor fasteners etc. complete. Maximum
height of suspension shall not exceed 500 mm.Size
of the tray shall be suitable for laying the above
mentioned cables.
G.I. Earthing strips of 50mm x 6mm thick, strip Rmt 80.00 221.84 17,747.20
shall be run on floor / ceiling / walls, from the
406 12 equipment to the nearest Earth pit with necessory
accessories as required. ( Erath pit shall be
executed by other agencies).
Supplying, installing, testing and commissioning of 0 0.00 0.00 0.00
MS Pipes, ERW confirming to IS 1239 Pt - I HEAVY
grade up to 150mm dia and pipes 200mm dia and
above shall be M.S as per IS: 3589 with painting,
407 13 suitable type of supports, anchor fasteners, bolts
nuts, clamps, "U" bolts, malleable specials such as
Reducers,Tees, elbows, flanges. Including cutting,
Welding, fixing in / on walls, ceiling by using
suitable supports etc, complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying, installing, testing and commissioning of 0 0.00 0.00 0.00
C.I. waffer type Non-return valves ( PN 16 ) swing
415 21 check type with required flanges, nuts, bolts and
gaskets etc. complete.
Supplying, installing testing and commissioning of 0 0.00 0.00 0.00
420 26 Cast Iron Body flanged Y-type Strainer with SS
screen complete with suitable flanges, nuts, bolts,
gaskets etc. complete.
Supplying, Installing, testing and commissioning 0 0.00 0.00 0.00
C.I. butterfly valves as per BS 5155 slim seal
424 30 standared lever operated type with required
flanges, nuts, bolts etc. complete.
Supplying, installing, testing and commissioning of 0 0.00 0.00 0.00
430 36 Gun metal chrome finished Ball valves with fittings
of screwed end type.
Supply and installation testing and commissioning Set 2.00 3245.00 6,490.00
of differential Pressure switches of suitable range
432 38 (0 to 12 bar) for pumpsets complete with necessay
Ball valves, Fittings like unions / colors / reducers
Supply and installation testing and commissioning Set 3.00 1357.00 4,071.00
of Pressure gauges of suitable range (0-16 bar),
433 39 100 mm diameter dial for pumpsets completes with
necessary Ball valves, siphon, Fittings like unions /
colors / reducers etc.
Supply, fixing, testing and commissioning of air No. 1.00 28190.20 28,190.20
vessel tank shall be fabricated out of of 200 mm dia
MS pipe to 2000 mm long complete with 25mm
inlet, 25mm drain, 25mm dia connection for air
release valve including legs, painting with red oxide
primer and finished with fire red enamel paint. It
shall be inclusive of all relevant pipes, valves,
specials upto pump header and other accessories
Exhuast pipe for Diesel engine of 80 mm dia M.S. Rmt 12.00 2100.40 25,204.80
Medium grade with mineral wool insulation with
aluminum sheet. The quoted rate shall include 100
mm diameter MS pipe medium grade conforming to
IS 1239 Part-1 and mineral wool insulation with
aluminum sheeting and Pipe supports also.
Supplying, installing, testing and commissioning of Nos. 1.00 92936.80 92,936.80
electrical motor driven Booster pump of Monoblock
type capable to deliver 900LPM at 35MWC.The
pump shall be coupled to TEFC motor of suitable HP
with speed of 2900RPM and complete set shall
mounted on common base frame.
Providing and fixing dust and vermin proof motor No. 1.00 28910.00 28,910.00
control panel fabricated from 14 SWG MS sheet
437 43 with stove enamelled paint and comprising of: (for
Fire Booster pump automatic operation ).
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supplying, installing, testing and commissioning of 0 0.00 0.00 0.00
MS Pipes, ERW confirming to IS 1239 Pt - I Medium
grade up to 150mm dia and pipes 200mm dia and
above shall be M.S as per IS: 3589 with painting,
438 44 suitable type of supports, anchor fasteners, bolts
nuts, clamps, "U" bolts, malleable specials such as
Reducers,Tees, elbows, flanges. Including cutting,
Welding, fixing in / on walls, ceiling by using
suitable supports etc, complete.
442 48 25mm nominal dia Rmt 0.00 377.60 0.00
Excavation of trenches up to 1.5 mts. in depth, for 0 0.00 0.00 0.00
laying pipes up to 150mm dia. Including forming
443 49 bottom surface to required level, refilling the
trenches with selected excavated earth around the
pipe in layers of 150mm thick, watering,
444 50 consolidating.
Excavation in all kinds of soil Cum 250.00 470.82 1,17,705.00
Supplying and wrapping of anti corrosive Sqm 250.00 413.00 1,03,250.00
bituminous tape on bituminous paint.
Supplying, installing, testing and commissioning of 0 0.00 0.00 0.00
C.I. waffer type Non-return valves ( PN 16 ) swing
446 52 check type with required flanges, nuts, bolts and
gaskets etc. complete.
Supplying, Installing, testing and commissioning 0 0.00 0.00 0.00
C.I. butterfly valves as per BS 5155 slim seal
449 55 standared lever operated type with required
flanges, nuts, bolts etc. complete.
Single headed hydrant valve as per IS 5290, made No. 13.00 5664.00 73,632.00
452 58 of SS with 63 mm dia instantaneous outlet of 80
mm dia fanged inelt ,Blank caps , chain and hand
wheels etc complete.
453 59 SS short branch pipe with nozzle conforming to IS No. 13.00 2575.94 33,487.22
M.S. Hose Box wall mounted type fabricated out of No. 13.00 3835.00 49,855.00
M.S. sheet of 16 swg. with glass fronted ( 4mm
thick glass with rubber beeding) door and size of
454 60 the cabinet shall be 750mm x 600 mm x 250 mm
Quoted rate shall be includes suitable stand for
mounting, all fasteners etc, and cabinet shall be
powder coated of approved colour both inside and
15 M long, 63mm dia RRL hose conforming to IS No. 26.00 4908.80 1,27,628.80
455 61 636 Type A with SS instantaneous couplings and
Hoses shall be stored inside fire Hose Box.
First aid Hose reel drum of 180° swinging type with No. 6.00 7280.60 43,683.60
19mm dia Rubber braided hose of 30M. length with
456 62 Ball Valve and 6mm diameter Shut off nozzle,
complete. The hose reel shall conforming to IS 884
Supplying, installing and commissioning of fire No. 1.00 10384.00 10,384.00
457 63 brigade inlet connection of 4 way with each of 63
mm dia. built - in Gun metal instantaneous coupling
type arranged on 150 mm dia.
Supplying and fixing approved make of 25mm dia No. 2.00 3469.20 6,938.40
458 64 automatic air release valve spring loaded type
complete with unions etc. complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation,Testing & Commisioning of 0 0.00 0.00 0.00
Microprocessor based Addresable fire alarm control
panel , fully networkable with each loop capable of
taking 99 devices, 8 line x 40 character alpha-
numeric liquid crystal display .The panel shall be
soft addressable type . The panel shall be able to
give pin point location of all fire/fault conditions.
459 65 Further, the panel must be able to automatically
switch off respective control switches when ever
any alarm is triggered. The panel shall have
integral SMF lead acid batteries with sealed cells of
24 V capable of running for a minimum of 8 hours
with integral battery charger complete as required
and as per specification. The fire alarm panel shall
be suitable for software integration with BMS & PA
460 66 system.
Supplying, installing, testing and commissioning of No. 10.00 4423.82 44,238.20
461 67 Addressable Manual Call Point with back box.
Supplying, installing, testing and commissioning of No. 10.00 7847.00 78,470.00
462 68 Analogue Addressable Loop powered Sounder with
Supplying, installing, testing and commissioning of No. 149.00 3599.00 5,36,251.00
463 69 photo electric (optical) smoke detector with base,
junction box and other accessories.
Supplying, installing, testing and commissioning of No. 1.00 3717.00 3,717.00
464 70 rate of rise heat detector with base, junction box
and other accessories.
Supplying, installing, testing and commissioning of Rmt 740.67 161.66 1,19,736.23
2C x 1.5 mm², armoured, single stand, outer
465 71 sheathed, FRLS, PVC insulated copper conductor
cable confirming to specified IS standards .
Providing and Fixing ISI marked ABC stored No 10.00 3410.20 34,102.00
pressure type Fire extinguisher of 6 Kgs. Capacity
confirming to IS: 15683 with discharge hose,
nozzle, Mono Amonium Phosphate base & ABC
powder pressurised with nitrogen gas carrying
handle and wall mounting bracket etc as required.
Providing and Fixing of 4.5 Kgs. Capacity CO2 gas No 10.00 6572.60 65,726.00
type ISI marked fire extinguisher (IS: 15683) fitted
467 73 with high pressure 1 mtr. Long discharge hose &
horn complete with refill gas, carrying handle and
wall mounting bracket etc as required.
Providing and Fixing of of 2 kG capacity Eco No 10.00 8932.60 89,326.00
Friendly, Stored pressure type filled with HFC 134 A
( clean agent fire extinguishant having Zero Ozone
depletion potential ) Clean Agent Fire Extinguishers
with safety seal, pressure guage, controllable
discharge mechanism, helium leak detection tested
and conforming to IS 15683 complete with initial
charge as required.
Providing and Fixing of Mechanical Foam type fire No. 2.00 2827.28 5,654.56
extinguisher 9Lts. Capacity, with initial filling in
brand new cylinder with powder coated finish, fitted
with Gun metal union, high pressure CO2 gas
cartridge, hose and ABS type branch pipe and wall
mounting bracket etc. complete, confirming to IS:
Fire buckets round bottom type enamel painted, No 4.00 501.50 2,006.00
470 76 white inside & Red out side and Letter "FIRE" in
black out side and handle with mounting bracket.
Fire bucket stand fabricated by MS angles to install No 2.00 2997.20 5,994.40
2 Nos. of buckets.
Floor identification signage (i.e, GROUND FLOOR… No 4.00 767.00 3,068.00
ETC.,) at each stair enclosure on every floor,
472 78 indicating the floor number in words, lettering size
shall be 7.5cm with contrasting colour from back
ground. Size shall be 15cm * 60cm.
Fire Exit signage at each stair on every floor, No 10.00 531.00 5,310.00
473 79 indicating the direction of fire exit, lettering size
shall be 7.5 cm with contrasting color from back
ground. Size shall be 15cm x 60cm.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing in position the signage of " Fire No 10.00 531.00 5,310.00
474 80 Extinguisher " to be fixed above the every
extinguisher. Size 6" x 8"
Providing and fixing in position the signage of " Fire No 6.00 531.00 3,186.00
475 81 Hydrant & Hose Reel " to be fixed near the every
fire shaft at all floors. . Size 6" x 8"
Supplying, installing, testing and commissioning of Nos 10.00 1711.00 17,110.00
6 Watt wall mounted speakers with built in line
476 82 matching transformer, grill flush mounting type in
side the utility rooms.
Supplying, installing, testing and commissioning of Nos 12.00 8243.48 98,921.76
12 Watt 85 dB LMT wall mounted speakers with
477 83 built in line matching transformer, grill flush
mounting type in side the utility rooms.
Supplying, installing, testing and commissioning Nos 1.00 101173.20 1,01,173.20
478 84 solid state Amplifier of 500 W RMS out put in rack,
including necessary control wires, jocks etc.
Supplying, installing, testing and commissioning of Nos 1.00 77874.10 77,874.10
P.A. Console 8 zone with priority module micro
479 85 processor based, mixing amplifier, with 6 zone for
suitable selection module, power supply unit &
goose neck micro phone etc.
Supplying, installing, testing and commissioning of No 1.00 36568.20 36,568.20
19" Rack 650mm depth, 16U high amplifier rack
assembly made of aluminum channel equivalent to
euro rack system, with side and rear panels made
of 14 swg powder coated sheet steel front
transparent persplexdoor and with rails, rollers &
bearings. Fans shall provided at the top for
ventilation side panels will be ventilated type. The
rack shall be powder coated of approved color and
spare 'U' shall be covered with blank panels.
Supplying, installing, testing and commissioning of Rmt 700.00 76.70 53,690.00
2 Core x 1 Sq.mm PVC insulated FRLS unarmored
Cable with Accessories confirming to IS standards
and specifications. The quoted rate shall includes of
Acrylic Fire stop Sealant in the opening for cables
passing through fire compartment walls of RCC
floors, masonry walls to provide up to 2 hours fire
Supplying, installing, testing and commissioning 0 0.00 0.00 0.00
approved make PVC FRLS conduits on ceiling / wall
482 88 / floor etc. complete with accessories like, Junction
boxes, Collars, Bends etc.
484 0 Sub-Total of Firefighting Works 0 0.00 0.00 53,21,454.71
0 Grand Total 10,09,09,978.06
0 Grand Total 10,09,09,978.06
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.03.30
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
11 BOQ BOL 015 NHM.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
8 Milestone.pdf
Tender Document
Signed IP.PDF
Tender Document
Drawings Bolangir CHC.pdf
Tender Document
corrigendum-1484-Corrigendum01.pdf
pdf • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .