A/R and M/o Non residential building under CD, APWD, Diglipur during the year 2022-23

Amount

Hire charges of Coaltar Boiler 900 to 1400 litres

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Hire charges of Diesel Road Roller - 8 to 10 tonne

Production cost of concrete by batch mix plant

Hire charges of Diesel Truck - 9 tonne (with POL)

Hire charges of Spraying machine including electric charges

Hire charges of Coaltar Sprayer

Pumping charges of concrete including Hire charges of pump, piping work & accessories etc.

Hire charges of Derrick monkey rope

Hire charges of Pump set of capacity 4000 litres/hour

Vibrator (Needle type 40 mm)

Machine for rubbing of floors

Front end loader capacity 1.00 cum

Hire and running charges of Tripod and Mechanical Winch machine complete with power unit and accessories

Mastic Cooker

Hire and running charges of tipper

Hire and running charges of loader

Hand Grinder for mirror polish

Hydraulic Excavator (3D) with driver and fuel

Pin vibrator

Surface Vibrator

Hot Bitumen Mixer 0.5 cum i/c hand cart

Hire and running charges of hydraulic piling rig with power unit etc. including complete accessories and shifting at site

Hire and running charges of light crane

Hire and running charges of bentonite pump

Hire and running charges of vibrating pile driving hammer complete with power unit and accessories

Hire and running charges of crane 20 tonne capacity

Carriage of ready mixed concrete by rotatory transit mixer

Generator 250 KVA

Steam curing by using boiler /Heater

Stressing Machine (jack with pump)

Paint applicator

Cutting saw machine

Strands Roller machinery for laying strands

Bed master (Pulling strands)

Mobile crane

Tractor with ripper attachment

Tractor with trolley

Air compressor 250 cfm with two leads for pneumatic cutters / hammers

Joint cutting machine with 2-3 blades

Cost for crane upto 40 tonne capacity

Motor Grader 3.35 metre blade

Front end loader 1 cum bucket capacity (incl POL)

Tipper-5 Cum/10 tonnes

Vibratory roller 8 to 10 tonne

Smooth Wheeled Roller 8 to 10 tonne

Tandem Road Roller

Water Tanker 5 to 6 KL capacity

Air compressor

Wet Mix Plant 60 TPH

Emulsion Pressure Distributor of capacity 1750 sqm per hour

Hot mix Plant -120 TPH capacity

Hot mix Plant 100 TPH Capacity

Paver finisher Hydrostatic with sensor control 100 TPH

Paver finisher Mechanical 100 TPH

Batching and Mixing Plant @ 75 cum per hour

Cost for crane upto 80 tonne capacity

Generator 250 KVA

Generator 100 KVA/125 KVA

Cost for crane having capacity 50MT

Road sweeper (Mechamical Broom) @ 1250 sqm per hour

Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual output

Pile Integrity testing equipment

Excavation of Diaphragm wall by Mechanical Grab

Hire charges of TATA 407 or equivalent for local shifting.

Hire charges of diesel truck - 9 tonne (witout POL)

Using cost of Ultra Violet Radiation tube

Compressor, gun, rubber pipes & other accessories- hire charge of plant & machinery i/c necessary fuel

Hire Charges of Suction Jeting machine 2200 PSI machine i/c POL and operator

Hire charges of Drill machine upto 30 mm dia

Hire charges of sand blasting equipment

Hire charges of compressor

Welding charges of shear key to existing reinforcement

Hire charges of plant and Machinery that can inject 350 kg/day

Seam bolts and nuts 6 mm dia and 25 mm long

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated sheet 6 mm thick

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement close fitting adjustable ridge

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement corrugate serrated adjustable ridge

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement plain wing adjustable ridge

Fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated apron piece

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement eaves filler piece

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement north light curves

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement ventilator curves

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement barge boards boards 6 mm thick

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement ridge finial

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement special north light curves

Fibre reinforced by organic fibres and/or inorganic synthetic fibres cement S type louvers

Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic fibres cement board 6 mm thick

Multi purpose fibre reinforced by organic fibres and/or inorganic synthetic fibres cement board 8 mm thick

6 mm thick heavy duty fiber cement board

8mm thick heavy duty fiber cement board

9 mm thick heavy duty fiber cement board

12.5 mm thick Gypsum plaster board

6 mm thick mulitipurpose cement bonded wood particle board conforming to IS : 14276

8 mm thick mulitipurpose cement bonded wood particle board conforming to IS : 14276

Factory made light weight composite non asbestos fibre reinforced aerated cement sandwitched wall/roof panel (50mm thick). The outer face on both sides of the panels will be non asbestos fibre cement board (minimum 4mm thick) confirming to IS 14862:2000

Factory made light weight non asbestos fibre reinforced aerated cement sandwitched wall/roof panel (75mm thick). The outer face on both sides of the panels will be non asbestos fibre cement board (minimum 5mm thick) confirming to IS 14862:2000

2mm thick sim pad

5mm thick sim pad

10mm thick sim pad

10 mm thick Cement Bonded particle board confirming to IS 14276

Manufactured sand derived from Recycled Concrete Aggregate (RCA)

Recycled Concrete Aggregate (RCA) 20 mm nominal size

Recycled Concrete Aggregate (RCA) 12.5 mm nominal size

Recycled Concrete Aggregate (RCA) 10 mm nominal size

Recycled Aggregate (RA) 40 mm nominal size

Recycled Aggregate (RA) 20 mm nominal size

Recycled Aggregate (RA) 10 mm nominal size

Stone Aggregate (Single size) : 63 mm nominal size

Stone Aggregate (Single size) : 50 mm nominal size

Stone Aggregate (Single size) : 40 mm nominal size

Stone Aggregate (Single size) : 25 mm nominal size

Stone Aggregate (Single size) : 20 mm nominal size

Stone Aggregate (Single size) : 12.5 mm nominal size

Stone Aggregate (Single size) : 10 mm nominal size

Stone Aggregate (Single size) : 06 mm nominal size

Safeda ballies 125 mm diameter

Bajri

Bamboo 25 mm dia 2.5 metre long

Bhusa

Paving bitumen of grade VG-10 of approved quality

Bitumen emulsion

Bitumen grade PMB - 40

Blown type petroleum bitumen of penetration 85/25 of approved quality

Bitumen hot sealing compound : grade A

Bitumen solution primer of approved quality

Premoulded joint filler 12 mm thick

Bitumen felt fibre base (vegetable or animal):As per IS 7193 Grade I

Bitumen felt :Type 3 grade 1

Coal Tar

Blasting powder

Blasting fuse (fuse wire)

White face insulating board: 12 mm thick

Natural colour insulating board: 12 mm thick

Flame retardant face insulating board: 12 mm thick

Flame retardant face insulating, Impregnated fibre board 12 mm thick

Flat pressed 3 layer particle board (medium density) Grade 1, 12 mm thick

Extra for veneered particle board with Teak veneering on one side and commercial veneering on other side

Extra for veneered particle board with Commercial veneering on both sides

Extra for veneered particle board with Teak veneering on both sides

Curing compound

Integral crystalline slurry

Integral crystalline admixture

Crystalline mortar

Integral crystalline dry shake

Swellable type water stop tape

Primer for swellable type water stop tape

Polymer modified adhesive mortar

Wire brush

Soft brush

Portland Cement (OPC-43 Grade)

White Cement

Coal (steam)

Cramp Gun metal 25x6x300 mm

Brass butt hinges (light/ordinary type) : 125x70x4 mm

Brass butt hinges (light/ordinary type) : 100x70x4 mm

Brass butt hinges (light/ordinary type) : 75x40x2.5 mm

Brass butt hinges (light/ordinary type) : 50x40x2.5 mm

Brass butt hinges (heavy type) : 125x85x5.5 mm(0.70 kg)

Brass butt hinges (heavy type) : 100x85x5.5 mm(0.56 kg)

Brass butt hinges (heavy type) :75x65x4.0 mm (weighing not less than 0.20 kg)

Brass parliamentary hinges 150x125x27x5 mm

Brass parliamentary hinges 125x125x27x5 mm

Brass parliamentary hinges 100x125x27x5 mm

Brass parliamentary hinges 75x100x20x3.2 mm

Brass single acting spring hinges 150 mm

Brass single acting spring hinges 125 mm

Brass single acting spring hinges 100 mm

Brass double acting spring hinges 150 mm

Brass double acting spring hinges 125 mm

Brass double acting spring hinges 100 mm

Brass tower bolt (barrel type) 250x10 mm

Brass tower bolt (barrel type) 200x10 mm

Brass tower bolt (barrel type) 150x10 mm

Brass tower bolt (barrel type) 100x10 mm

Brass flush bolt 250 mm

Brass flush bolt 150 mm

Brass flush bolt 100 mm

Brass handles 125 mm with plate 175x32 mm

Brass handles 100 mm with plate 150x32 mm

Brass handles 75 mm with plate 125x32 mm

Brass door latch 300x16x5 mmweighing not less than 0.380 kg

Brass door latch 250x16x5 mm weighing not less than 0.350 kg

Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles

Brass mortice latch 100x65mm with a pair of brass lever handles

Brass 150 mm floor door stopper weighing not less than 0.357kg

Brass hard drawn hooks and eyes 300 mm

Brass hard drawn hooks and eyes 250 mm

Brass hard drawn hooks and eyes 200 mm

Brass hard drawn hooks and eyes 150 mm

Brass hard drawn hooks and eyes 100 mm

Brass casement window fastener

Brass casement stays (straight peg type) 300 mm weighing not less than 0.33 kg

Brass casement stays (straight peg type) 250 mm weighing not less than 0.28 kg

Brass casement stays (straight peg type) 200 mm weighing not less than 0.24 kg

Brass quadrant stays 300 mm

Brass fanlight catch

Brass fanlight pivot

Brass chain with hook for fan light catch

Brass hasps and staples (safety type) 150 mm

Brass hasps and staples (safety type) 115 mm

Brass hasps and staples (safety type) 90 mm

Brass night latch

Brass helical spring 150 mm

Brass curtain rod 20 mm dia 1.25 mm thick

Brass curtain rod 25 mm dia 1.25 mm thick

Brass brackets (curtain rods) 20 mm

Brass cupboard knob or wardrobe knob 50 mm

Brass screws 50 mm

Brass screws 40 mm

Brass screws 30 mm

Brass screws 25 mm

Brass screws 20 mm

plastic sleeves for screw

Chromium plated Brass butt hinges (heavy) type 75x65x4 mm weighing not less than 200gms

Chromium plated Brass butt hinges (light/ordinary) type 125x70x4mm

Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm

Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5 mm

Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm

75mm SS fancy handles for kitchen cabinet

100mm SS fancy handles for kitchen cabinet

125mm SS fancy handles for kitchen cabinet

Chromium plated Brass handles 125 mm with plate 175 x32 mm

Chromium plated Brass handles 100 mm with plate 150 x 32 mm

Chromium plated Brass handles 75mm with plate 125x32 mm

Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles

Chromium plated brass casement window fastener

Chromium plated Brass casement stays (straight peg type) 300 mm weighing not less than 0.33 kg

Chromium plated Brass casement stays (straight peg type) 250 mm weighing not less than 0.28 kg

Chromium plated Brass casement stays (straight peg type) 200 mm weighing not less than 0.24 kg

Chromium plated Brass Night latch

Chromium plated Brass Wardrobe Knob 50 mm

Chromium plated Brass screws 50 mm

Chromium plated Brass screws 40 mm

Chromium plated Brass screws 30 mm

Chromium plated Brass screws 25 mm

Chromium plated Brass screws 20 mm

Chromium plated Brass curtain rod 12 mm dia 1.25mm thick

Chromium plated Brass curtain rod 20 mm dia 1.25mm thick

Chromium plated Brass curtain rod 25 mm dia 1.25mm thick

C.P. Brass Extension Nipple (1/2"x2" size)

Bright finished or black enameled mild steel butt hinges 125x65x 2.12 mm

Bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm

Bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm

Bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm

Nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide

Bright finished or black enameled mild steel screws 50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 30 mm

Bright finished or black enameled mild steel screws 25 mm

Bright finished or black enameled mild steel screws 20 mm

Bright finished or black enameled mild steel bolts and nuts 50x6 mm

Oxidised mild steel butt hinges 125x65x2.12 mm

Oxidised mild steel butt hinges 100x58x1.90 mm

Oxidised mild steel butt hinges 75x47x1.70 mm

Oxidised mild steel butt hinges 50x37x1.50 mm

Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm

Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm

Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm

Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm

Oxidised mild steel single acting spring hinges 150 mm

Oxidised mild steel single acting spring hinges 125 mm

Oxidised mild steel single acting spring hinges 100 mm

Oxidised mild steel double acting spring hinges 150 mm

Oxidised mild steel double acting spring hinges 125 mm

Oxidised mild steel double acting spring hinges 100 mm

Nickel plated mild steel piano hinges 1 mm thick 35 mm wide

Oxidised mild steel sliding door bolt 300x16 mm

Oxidised mild steel sliding door bolt 250x16 mm

Oxidised mild steel door latch 300x20x6 mm

Oxidised mild steel door latch 250x20x6 mm

Oxidised mild steel tower bolt (barrel type) 250x10 mm

Oxidised mild steel tower bolt (barrel type) 200x10 mm

Oxidised mild steel tower bolt (barrel type) 150x10 mm

Oxidised mild steel tower bolt (barrel type) 100x10 mm

Oxidised mild steel handles 125 mm

Oxidised mild steel handles 100 mm

Oxidised mild steel handles 75 mm

Oxidised mild steel hasps and staples (safety type) 150 mm

Oxidised mild steel hasps and staples (safety type) 115 mm

Oxidised mild steel hasps and staples (safety type) 90 mm

Oxidised mild steel screws 50 mm

Oxidised mild steel screws 40 mm

Oxidised mild steel screws 30 mm

Oxidised mild steel screws 25 mm

Oxidised mild steel screws 20 mm

Anodised Aluminium butt hinges 125x75x4 mm

Anodised Aluminium butt hinges 125x63x4 mm

Anodised Aluminium butt hinges 100x75x4 mm

Anodised Aluminium butt hinges 100x63x3.2 mm

Anodised Aluminium butt hinges 100x63x4 mm

Anodised Aluminium butt hinges 75x63x4 mm

Anodised Aluminium butt hinges 75x63x3.2 mm

Anodised Aluminium butt hinges 75x45x3.2 mm

Anodised Aluminium sliding door bolt 300x16 mm

Anodised Aluminium sliding door bolt 250x16 mm

Anodised Aluminium tower bolt (barrel type) 300x10 mm

Anodised Aluminium tower bolt (barrel type) 250x10 mm

Anodised Aluminium tower bolt (barrel type) 200x10 mm

Anodised Aluminium tower bolt (barrel type) 150x10 mm

Anodised Aluminium tower bolt (barrel type) 100x10 mm

Anodised Aluminium handles 125 mm with plate 175 x 32 mm

Anodised Aluminium handles 100 mm with plate 150 x 32 mm

Anodised Aluminium handles 75mm with plate 125 x 32 mm

Anodised Aluminium kicking plate 50 cm long 100x3.15 mm

Block board construction flush door with teak wood ply on both faces 35 mm thick

Block board construction flush door with teak wood ply on both faces 30 mm thick

Block board construction flush door with teak wood ply on both faces 25 mm thick

Block board construction flush door with commercial ply on both faces 35 mm thick

Block board construction flush door with commercial ply on both faces 30 mm thick

Block board construction flush door with commercial ply on both faces 25 mm thick

Block board construction flush door lipping 25 mm thick

Square vision panel in Block board construction flush door not exceeding 0.10 sqm

Circular vision panel in Block board construction flush door

Decorative type louvers in Block board construction flush door

Rebate cutting in block board construction flush door

Decorative plywood 4 mm

Fuel wood

Calcium silicate base compound for jointing calcium silicate tiles

Cement Concrete Jali 50 mm thick

Cement Concrete Jali 40 mm thick

Cement Concrete Jali 25 mm thick

Kerosene oil

White cement based polymer modified self curing compound in powder form

Unslaked lime

Dehradun white lime

Satna lime

Dry hydrated lime (factory made)

Marble dust/ powder

Marble chips up to 4 mm and down size White & black

Marble chips large size above 4 mm White & black

Silicon and acrylic emulsion

Acrylic distemper 1st quality , having VOC content less than 50 grams/ litre

Acrylic emulsion, having VOC content less than 50 grams/ litre

Premium plastic acrylic emulsion of interior grade, having VOC content less than 50 grams/ litre

Ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Water thinnable cement primer for interior wall surface, having VOC content less than 50 grams/ litre

Moorum

White cement based putty

Aluminium paint

Acid proof paint (chocolate or black)

Anticorrosive bituminous paint (black)

Black Japan paint

Synthetic enamel paint in black or chocolate shade

Synthetic enamel paint in all shades except black or chocolate shade

100% Premium acrylic dirt resistance, Silicone additives exterior paint

Acrylic Exterior Primer

Roofing paint for iron sheets in red colour

Water proofing cement paint

Wax polish (ready made)

Ordinary varnish

Superior copal varnish

Superior spar varnish

Oil type wood preservative

Putty for wood work

Pig lead

Premixed super white gypsum plaster

Plaster of Paris

Copper pins 6 mm dia 7.5 cm long

Black colour dark shade pigment

Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment

Green or blue medium shade pigment

Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia

Sand Cast iron plain shoe 150 mm dia

Copper plate

Pulley 25 mm dia

Rolling shutter made of 80x1.25 mm machine rolled laths

Top cover for rolling shutters 1.25 mm thick

27.5 cm long wire spring grade No. 2 for rolling shutters

Ball bearing for rolling shutters

Extra for mechanical devices chain and cranked operation for operating rolling shutters: exceeding 10.00 sqm and up to 16.80 sqm area of door

Extra for mechanical devices chain and cranked operation for operating rolling shutters: exceeding 16.80 sqm area of door

Royalty for good earth

Coarse sand (zone III)

Fine sand (zone IV)

Galvanised steel plain sheets

FY-1860 grade wire strands

Standard quality hard board sheet 3 mm thick

Standard quality hard board sheet 4.5 mm thick

Shellac

Spirit

Spun yarn

Mild steel round bar 12 mm dia and below

Mild steel round bar above 12 mm dia

Average rate of Mild steel round bars for reinforcement

Twisted steel/ deformed TMT bars Fe-500D

Mild steel square bars

Structural steel such as tees, angles channels and R.S. joists

Flats up to 10 mm in thickness

Flats exceeding 10 mm in thickness

Mild steel plates

Steel glazed door, window/ ventilator, all members viz. F7D, F4B, K11 and K12B etc.

Pregalvanized high tensile steel confirming to IS:277-199

Mild steel sheets of 1.00 mm thickness for tanks

Mild steel expanded metal 20x60 mm strands 3.25 mm wide 1.60 mm thick

Mild steel hooks

Mild steel rivets

Hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 kg/sqm

Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

Galvanised steel J or L hooks 8 mm dia

Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head with slots

Mild steel bolts 6 mm dia and 25 mm long with hexagonal head

Erection Bolts ( Minimum 04 nos for each element)

Straining bolts

Galvanised steel barbed wire of 9.8 kg /100metre

Galvanised steel turn buckles

Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts

Galvanised steel bolts 10 mm dia and 7 cm long with nuts

Bolts and nuts up to 300 mm in length

Bolts and nuts above 300 mm in length

Iron pintels including welded pin

Steel beading 10x10x1.6mm (box type)

Glass strip 4 mm thick 40 mm deep

Boundary stone top chisel dressed 15x15x90 cm

Through and bond stone

Stone for masonry work

Stone for pitching 15 cm x 22.5 cm

Stone dust

Red sand stone block

White sand stone block

White sand stone slab 75 mm thick (un-dressed)

Red sand stone slab 40 mm thick (un-dressed)

White sand stone slab 40 mm thick (un-dressed)

Red sand stone slab 30 mm thick (un-dressed)

Kota stone slab 20 mm to 25 mm thick (semi-polished)

Kota stone slab 25mm thick (rough chiseled)

Red sand stone slab 45 mm to 50 mm thick (un-dressed)

White sand stone slab 45 mm to 50 mm thick (un-dressed)

Stone grit 6 mm and down size or pea sized gravel

Crushed stone 2.36 mm to 12.5 mm size

Precast terrazzo tiles 22 mm thick (light shade)

Precast terrazzo tiles 22 mm thick (medium shade)

Precast terrazzo tiles 22 mm thick (dark shade)

Precast heat resistant terrace tiles (size 300x300 mm) and 20 mm thick

G.I. Limpet washer

Bitumen washer

G.I. plain washer thick

G.I. plain washer thin

G.I. plain washer for seam bolts

Water proofing materials

Welding by gas plant

Welding by electric plant

GI Wire mesh 100x100 mm

M.S. Shear stud

M.S. Wire nails

M.S. Wire mesh (rabbit)

M.S. 20 mm dia holding down bolts

Mild steel sheets with bolts and nuts to rest on pintels

Steel weld mesh

Hard drawn steel wire

Mild steel flat strap fitting

Chequered terrazzo tiles 22 mm thick (light shade)

Chequered terrazzo tiles 22 mm thick (medium shade)

Chequered terrazzo tiles 22 mm thick (dark shade)

Diesel

Cutting marble or sand stone slab up to 50 mm thick by mechanical device

18 mm thick Flamed finish granite stone slab

18 mm thick Italian Marble stone slab, Perlato (slab area up to 0.5 sqm).

Commercial LPG in cylinder

Glass mossaic tiles (20 mm x 20 mm x 4 mm)

Tile fixing chemical adhesive

Cement Polymer Grout Compound

Acid for cleaning tiles

Silicon based Joint Sealant for Tiles

Rubber base Adhesive

Epoxy based sealing Compound

Acrylic based sealing compound

Non woven reinforcement Tape

M-60 grade cemetitious grout (Non Shrink)

Cementitious polymer base adhesive confirming to EOTA ETAG 004 (European Technical Approval)

Polypropylene mechanical fastener with plastic pin confirming to EOTA ETAG 014 (European Technical Approval) having dia 10mm & L=200mm

Moisture cure Polyurethane Foam

PVC Corner Bead of size 25mmx25mm fixed with glass fibre mesh (100mm x 100mm)

Cementitious polymer base coat confirming to EOTA ETAG 004 (European Technical Approval)

Fiberglass mesh with alkali-resistant coating having mass per unit area > 145 g/m2, mesh size: 3.9x4.0 mm ±10%

Bleaching powder

Surface box for stop cock

Surface box for sluice valve

Surface box for water meter

C.I. bracket for wash basin and sinks

8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C.

C.P.brass chain with 32 mm dia rubber plug

C.P.brass chain with 40 mm dia rubber plug

50mmx50mm hardwood plug

Clamps and M.S. stays including bolts and nuts for 100 mm pipe

M.S. Holder bat clamp of approved design for 100 mm S.C.I. pipe

M.S. Holder bat clamp of approved design for 75 mm S.C.I. pipe

Clamps and M.S. stays including bolts and nuts for 50 mm pipe

Clamps and M.S. stays including bolts and nuts for 75 mm pipe

Clearing eye with chain and lid 100 mm dia

Clearing eye with chain and lid 150 mm dia

Brass bib-cock 15 mm dia

Brass bib-cock 20 mm dia

Brass stop-cock 15 mm dia

Brass stop-cock 20 mm dia

Mosquito proof coupling of approved design

C.I. cover and frame 300x300 mm inside

C.I. cover without frame 300x300 mm inside weight not less than 4.50 kg

C.I. Rectangular cover 455x610 mm with frame (low duty)

C.I. Rectangular cover 455x610 mm without frame (low duty)

C.I. 500 mm dia cover with frame (medium duty)

C.I. 500 mm dia cover without frame (medium duty)

C.I. mouth, brass ferrule 15 mm dia

C.I. mouth, brass ferrule 20 mm dia

C.l. mouth, brass ferrule 25 mm dia

Vitreous china foot rests 250x130x30 mm

C.I. grating 100x100 mm

C.I. grating 150x150 mm

C.I. grating 180x180 mm

S.C.I. gully or nahani grating 100 mm dia

Rubber insertions for 75 mm dia pipe joints

Rubber insertions for 100 mm dia pipe joints

Rubber insertions for 125 mm dia pipe joints

Rubber insertions for 150 mm dia pipe joints

Rubber insertions for 200 mm dia pipe joints

Rubber insertions for 250 mm dia pipe joints

Rubber insertions for 300 mm dia pipe joints

Rubber insertions for 350 mm dia pipe joints

Rubber insertions for 400 mm dia pipe joints

Rubber insertions for 450 mm dia pipe joints

Rubber insertions for 500 mm dia pipe joints

Rubber insertions for 600 mm dia pipe joints

Mirror of superior make glass 60x45 cm

Vitreous china pedestal for wash basin

Pig lead

S & S.C.I. standard specials upto 300 mm dia (heavy class)

S & S.C.I. standard specials over 300 mm dia (heavy class)

Flanged C.I. standard specials upto 300 mm dia (heavy class)

Flanged C.I. standard specials over 300 mm dia (heavy class)

Casing pipe 100 mm dia

Flush pipe with union spreaders and clamps all in C.P. brass for single stall

Flush pipe with union spreaders and clamps all in C.P. brass for double stall

Flush pipe with union spreaders and clamps all in C.P. brass for range of three stall

Flush pipe with union spreaders and clamps all in C.P. brass for range of four stall

Flush pipe and spreaders G.l. for single set of one squatting plate urinal

Flush pipe and spreaders G.l. for range of two squatting plates urinal

Flush pipe and spreaders G.l. for range of three squatting plates urinal

Flush pipe and spreaders G.l. for range of four squatting plates urinal

G.I. pipes 15 mm dia

G.I. pipes 20 mm dia

G.I. pipes 25 mm dia

G.I. pipes 32 mm dia

G.I. pipes 40 mm dia

G.I. pipes 50 mm dia

G.I. pipes 65 mm dia

G.I. pipes 80 mm dia

G.I. pipes 100 mm dia

G.I. pipes 150 mm dia

G.I. back (jam) nuts 25 mm dia

G.I. back (jam) nuts 65 mm dia

G.I. tees (equal) 25 mm

G.I. tees (equal) 65 mm

G.I. inlet connection

S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 75 mm dia

S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 100 mm dia

S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 150 mm dia

S.C.I. plain bend 75 mm dia

S.C.I. plain bend 100 mm dia

S.C.I. plain bend 150 mm dia

S.C.I. bend with access door 75 mm dia

S.C.I. bend with access door 100 mm dia

S.C.I. plain single equal junctions 75x75x75 mm dia

S.C.I. plain single equal junctions 100x100x100 mm dia

S.C.I. single equal junctions 75x75x75 mm dia with access door

S.C.I. single equal junctions 100x100x100 mm dia with access door

S.C.I. plain double equal junctions 75x75x75x75 mm dia

S.C.I. plain double equal junctions 100x100x100x100 mm dia

S.C.I. double equal junctions 75x75x75x75 mm dia with access door

S.C.I. double equal junctions 100x100x100x100 mm dia with access door

Slotted cowl (terminal guard) 75 mm dia

Slotted cowl (terminal guard) 100 mm dia

G.I. Union 15 mm nominal bore

G.I. Union 20 mm nominal bore

G.I. Union 25 mm nominal bore

G.I. Union 32 mm nominal bore

G.I. Union 40 mm nominal bore

G.I. Union 50 mm nominal bore

G.I. Union 65 mm nominal bore

G.I. Union 80 mm nominal bore

Polyethylene water storage tank with cover and suitable locking arrangement

Sand cast iron S&S plain single unequal junctions: 100x100x75 mm dia

Sand cast iron S&S single unequal junctions: 100x100x75 mm dia with access door

Sand cast iron S&S plain double unequal junctions: 100x100x75x 75 mm dia

Sand cast iron S&S double unequal junctions: 100x100x75x75 mm dia with access door

Sand cast iron heel rest bend 75 mm dia

Sand cast iron heel rest bend 100 mm dia

S.C.I. single equal invert branch of required degree 75x75x75 mm dia

S.C.I. single equal invert branch of required degree 100x100x 100 mm dia

S.C.I. double equal invert branch of required degree 75x75x75x 75 mm dia

S.C.I. double equal invert branch of required degree 100x100x100x 100 mm dia

S.C.I. single unequal invert branch of required degree 100x100x 75 mm dia

S.C.I. double unequal invert branch of required degree 100x100x75x 75 mm dia

S.C.I. door pieces 75 mm dia

S.C.I. door pieces 100 mm dia

S.C.I. collar 75 mm dia

S.C.I. collar 100 mm dia

Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore

Unplasticised P.V.C. connection pipe with brass union 30 cm long 20 mm bore

Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore

Unplasticised P.V.C. connection pipe with brass union 45 cm long 20 mm bore

White vitreous china laboratory sink 450x300x150 mm

White vitreous china laboratory sink 600x450x200 mm

White plastic seat (solid) with lid C.P. brass hinges and rubber buffers

Black plastic seat (solid) with lid C.P. brass hinges and rubber buffers

Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia

Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia

Dismenteled P or S trap scrap (approx wt 2kg)

Spun yarn

Strainer brass 40 mm dia 1.5 metre long

15 mm C.P. brass tap

C.P. brass toilet paper holder of standard size

Centrifugally SCI(spun) S & S P or S trap

C.I. trap for standard urinal with vent arm with operating and other couplings in C.P. brass: 50 mm dia

C.I. trap for standard urinal with vent arm with operating and other couplings in C.P. brass: 80 mm dia

C.P. brass trap 40 mm dia

100 mm S.C.I. trap with vent heel

100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet

100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet

S.W. gully trap P type 100x100 mm

S.W. gully trap P type 150x100 mm

S.W. gully trap P type 180x150 mm

Vitreous china lipped front urinal

Vitreous china squatting plate urinal

H.P. or L.P. ball valve with polythene floats: 15 mm dia

H.P. or L.P. ball valve with polythene floats: 20 mm dia

H.P. or L.P. ball valve with polythene floats: 25 mm dia

20 mm dia Gunmetal gate valve with wheel

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

Brass full way valve with C.I. wheel (screwed end) 32 mm dia

Brass full way valve with C.I. wheel (screwed end) 40 mm dia

Brass full way valve with C.I. wheel (screwed end) 50 mm dia

Brass full way valve with C.I. wheel (screwed end) 65 mm dia

Brass full way valve with C.I. wheel (screwed end) 80 mm dia

Gunmetal non-return valve-horizontal (screwed end) 25 mm dia

Gunmetal non-return valve-horizontal (screwed end) 32 mm dia

Gunmetal non-return valve-horizontal (screwed end) 40 mm dia

Gunmetal non-return valve-horizontal (screwed end) 50 mm dia

Gunmetal non-return valve-horizontal (screwed end) 65 mm dia

Gunmetal non-return valve-horizontal (screwed end) 80 mm dia

C.I. sluice valve (with caps) class I: 100 mm dia

C.I. sluice valve (with caps) class I : 125 mm dia

C.I. sluice valve (with caps) class I: 150 mm dia

C.I. sluice valve (with caps) class I : 200 mm dia

C.I. sluice valve (with caps) class I : 250 mm dia

C.I. sluice valve (with caps) class I: 300 mm dia

Vitreous china flat back wash basin 630x450 mm

Vitreous china angle back wash basin 600x480 mm

Vitreous china angle back wash basin 400x400 mm

C.P. brass waste 32 mm

C.P. brass waste 40 mm

Vitreous china Indian type W.C. pan of size 580 mm

Vitreous china orrisa type W.C. pan of size 580 mm

Vitreous china pedestal type water closet

Bolts and nuts 16 mm dia 60 mm long

Bolts and nuts 16 mm dia 65 mm long

Bolts and nuts 20 mm dia 65 mm long

Bolts and nuts 20 mm dia 70 mm long

Bolts and nuts 20 mm dia 75 mm long

Bolts and nuts 20 mm dia 80 mm long

Bolts and nuts 24 mm dia 85 mm long

Bolts and nuts 24 mm dia 90 mm long

Bolts and nuts 27 mm dia 100 mm long

White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use as squatting pan or European type water closet as per manufacturer's specifications

Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings & fixtures,seat cover etc

Vitreous china foot rests 250x125x25 mm

Common burnt clay F.P.S. bricks tile class designation 10

Common burnt clay modular bricks class designation 12.5

Strips-Aluminium fluted 3.15 mm thick and 150 mm wide

Strips Aluminium fluted 3.15 mm thick and 200 mm wide

1 mm thick Stainless Steel Cover plate grade 304

Coupler 16 mm dia

Coupler 20 mm dia

Coupler 25 mm dia

Coupler 28 mm dia

Coupler 32 mm dia

Complete Roof Joint of 100 mm

Complete Roof Joint of 150 mm

Complete Roof Joint of 200 mm

Epoxy adhesive

Floor Joint of 100 mm

Floor Joint of 150 mm

Floor Joint of 200 mm

Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm)

Float glass panes of nominal thickness 8 mm (weight not less than 20.00 kg/sqm)

Wall Joint of 100 mm

Wall Joint of 150 mm

Wall Joint of 200 mm

12 mm commercial ply

21mm thick clear toughened Laminated glass for fins with holes

Hollock ballies 125 mm diameter

Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete

Brass cupboard lock 6 levers of approved quality, 40 mm size

Brass cupboard lock 6 levers of approved quality, 50 mm size

Brass cupboard lock 6 levers of approved quality, 65 mm size

Brass cupboard lock 6 levers of approved quality, 75 mm size

Brass hanging type door stopper 150 mm

Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete

Anodised Aluminium hanging type door stopper

Anodised Aluminium pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete

Anodised Aluminium Casement stay 250 mm

Chromium plated Brass pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete

Nickled Chromium Brass cupboard lock 40 mm size

Nickled Chromium Brass cupboard lock 50 mm size

Nickled Chromium Brass cupboard lock 65 mm size

Nickled Chromium Brass cupboard lock 75 mm size

Pre-laminated with decorative lamination on both side exterior Grade-I MDF Board 12 mm thick confirming to IS:14587

Pre-laminated with decorative lamination on both side exterior Grade-I MDF Board 18 mm thick confirming to IS:14587

Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade-I MDF Board 25 mm thick confirming to IS: 14587

Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade-I MDF Board 12 mm thick confirming to IS:14587

Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade-I MDF Board 18 mm thick confirming to IS:14587

PVC edge bending tape 2.00 mm thick

Pre laminated both side solid foam uPVC profile (45x20mm)

Solid foam uPVC sheet 20mm thick pre laminated on both side

PVC edge beading

Expandable fastner with plastic sleeve

18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008

6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008

19mm thick prelaminated ply

Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10mm x 60 mm

Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10mm x 80 mm

Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10 mm x 120 mm

Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10mm x 140 mm

Carben Steel galvanised (min 5 micron) dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10mm x 160 mm

Common burnt clay F.P.S. (non modular) bricks class designation 7.5

Weather/structural non sag elastomeric PU sealant (600ml Sausage) for joints in RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum/ Alluminium work complying to ASTM C920, DIN 18540-F & ISO 11600 incl all taxes

Structural sealant - 6 mm x 12 mm

Spacer tape 6.4 mm thick x 6 mm wide

Weather Sealant - Non Staining (600 ml)

Weather Sealant - Normal (300 ml)

MS Brackets/Aluminium Alloy Brackets

Silicon Gasket in Kg (Above 50 g / m)

EPDM Gasket in Kg (Above 60 g / m)

Anchor Fastner - M10

SS Bolt with washer of different sizes for structural glazing / ACP Cladding

SS Screws of sizes for structural glazing / ACP Cladding

Protective Tape

GI flashing - 1.2 mm Thick

6 mm thick High performance glass

6 mm thick clear heat strengthened glass

6 mm thick clear heat strengthened glass

ARMS GS HD - Top Hung -20"- Type P- Couple

Connection Block for vision glass panel

Curtain wall striker for vision glass panel

Adjustable Fastening Pawl for vision glass panel

Corner drive for vision glass panel

Top wedge Block for vision glass panel

Glass wool of denisity @ 48 Kg / cum with black glass tissue (BGT)

SS Screws - # 8 x 19

Weather Sealant - DC 789

Cement Board

Baker rod

4 mm thick ACP

Fire Stop

GI/Aluminium Sheet (0.8 mm thick)

GI Screws of gauge 10, length 25 mm for fixing cement fibre board to C section

GI Screws of gauge 10, length 45 mm for fixing cement fibre board to C section

Vapour barrier

Glass panes of required thickness having 120 minutes of fire resistance both integrity and radiation control (EI 120) and minimum 20 minutes of insulation (EI 20)

G.I U beading of 1.6 mm thick G.I sheet with ceramic tape.

Ceramic tape 5 x20 mm size

Aluminium Strip 40 mm wide and 2 mm thick

Truf Paver (500 x 500 x 40 mm)

Ceremic Tiles Pieces for Crazy Flooring

White marble makrana second quality plain veined stone pieces for crazy flooring

FS800H Grade Flooring Panel (Size 600 mm x600 mm x32 mm)

Zinc Electroplated Pedestals - 300 mm

Zinc Electroplated Pedestals - 450 mm

Zinc Electroplated Tube Stinger

Machine Screw for Fixing

8 mm thick granite stone tiles (mirror polished of all shades)

8 mm thick marble tiles (polished) Raj Nagar

Double charge vitrified tile polished finish of size 60 x 60 cm

Double charge vitrified tile polished finish of size 80 x 80 cm

Double charge vitrified tile polished finish of size 60 x 120 cm

Double charge vitrified tile polished finish of size 80 x 160 cm

Double charge vitrified tile polished finish of size 100 x 100 cm

Glazed vitrified tiles polished finish of size 60 x 60 cm

Glazed vitrified tiles polished finish of size 60 x 120 cm

Glazed vitrified tiles polished finish of size 80 x 80 cm

Glazed vitrified tiles polished finish of size 80 x 120 cm

Glazed vitrified tiles polished finish of size 120 x 120 cm

Glazed Vitrified tiles Matt/Antiskid finish of size 60 x 60 cm

Glazed Vitrified tiles Matt/Antiskid finish of size 60 x 120 cm

Glazed Vitrified tiles Matt/Antiskid finish of size 80 x 80 cm

Glazed Vitrified tiles Matt/Antiskid finish of size 80 x 120 cm

Glazed Vitrified tiles Matt/Antiskid finish of size 120 x 120 cm

Stone Aggregate (Single size): 100 mm nominal size

Stone Aggregate (Single size): 80 mm nominal size

Stone chippings/ screenings 4.75 mm nominal size

Stone chippings/ screenings 150 micron nominal size

Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size

Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size

Stone chippings/ screenings 12.5/ 13.2 mm nominal size