Diversion of a portion of 33 KV O/H Line originating from Kathara CCL Sub-station Loc 39 to Loc 40 and termination to Kathara Washery near P.O Office Kathara Washery, CCL Kathara Area

Amount

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required

Supplying and erection of galvanised stay set for 33 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm ), 7/ 4.00 mm dia GI stay wire and 33 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. as required. (3 SPN x 60mtr x 3 wire) = 540 mtrs. X 0.726 kg/mtr = 392.04 Kg. + 2% sagging + 2% binding & jumphering etc. = 407.72 Kg.

Supplying and erection of set of cross bracing FRL same work for 33KV over head line double pole structure having four members fabrication out of 65mm x 65mm x 6mm angle iron to form a rectangle of minimum size 2400mm width x 2800 mm height complete 50mm x 6mm M.S flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts, washer etc and painting with primer and finished paint as required

Supplying of channel iron 100MM X 50MM X 6MM (9.56 Kg Per Mtrs) cross arm for three wire 33KV overhead line conductors complete with 50mm x 50mm x 6mm angle iron bracket welded to the channel iron and complete with 50mm x 6mm M.S flat iron clamps, bolts, nuts including drilling holes for insulator pins/fitting, bolts, nuts, washer etc and painting with primer and finished paint

Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required

Supplying and erection of 33 KV pin insulator complete with large steel head G.l pin, nuts, washer etc as required

Supplying and erection of a set of three 11KV disc insulator for 33KV overhead lines with galvanized insulator fittings ball and socket type and complete with galvanized strain clamps, bolts, nuts, washer etc. as required

Erection of G.I. Wire No. 8 SWG including binding etc. as required

Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Dismantling of O/H lines comprising of copper / aluminum over head conductor G.I wire cross arms insulators etc as required

Transportation of pole from different places to site

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work sqm

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required

Dismantling of pole / street light standard / strut embedded in cement concrete foundation etc

Supply and installation of Lightening Protection Mast with G.l pipe of size 1.5 inch dia and 10 feet length and connection to the Earth Pit with G.l wire & lugs

Providing of nut, bolt, washer and clamp etc. as per required size

Providing of conductor straight through joint sleeve (dog to dog)

Total impact of GST for the purpose of CTC

M/S TIGER ENTERPRISES (BID ID -1141094)

M/S C POWER (BID ID -1139423)