Replacement of damaged non asbestos sheets and corroded structural steel members in Suphala Plant inside RCF Factory Trombay Chembur Mumbai 400074

Dismantling steel work in built up sections in angles, tees, flats and channels of rolling shutters, grills, gates, fencing, hoardings, including all gusset plates, bolts, nuts, cutting rivets, welding, m.s. pipes etc and depositing the dismantled scrap at Scrap Yard within RCF Trombay Factory Premises after weighment at RCF weigh bridge . Payment will be made based on weight mentioned on weighment slip .

Removing Existing Mangalore tiles / AC / GI / Galvalume Sheets / polycarbonate plain and corrugated sheets from roof / cladding / partitions etc., excluding supporting structure but including scaffolding, handling, transporting, sorting and stacking within RCF Factory premises etc complete as directed.

Removing Existing Mangalore tiles / AC / GI / Galvalume Sheets / polycarbonate plain and corrugated sheets from roof / cladding / partitions etc., excluding supporting structure but including scaffolding, handling, transporting, disposing within RCF Factory premises etc complete as directed.

Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (Brand - TATA, SAIL, JSW, RNIL, VIZAG or equivalent to be approved before procurement) Rate including scaffolding whenever required from 0 m to 10 m.

Extra over For height 10 m to 16 m from ground level (5% of item no.4)

Extra over For height 16 m to 26 m from ground level (10% of item no.4)

Extra over For height 26 m to 36 m from ground level (15% of item no.4)

Fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (If equired)(which are to be prepared by Contractor and got approved from Engineer, transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up after erection etc complete as directed by Engineer In Charge. (The qty. of gusset plates, base plates, bolts shall be measured in M.T.) Structural steel shall be supplied by RCF on non chargeable basis at its store. Paint to be brought by contractor and get approved. Rate including necessary scaffolding.

Providing and fixing at all heights, level and locations profile roofing sheet of material grade SS 304 including profiling, transportation etc complete. The profiles sheets shall be fixed to purline members with SS 304 , 8mm dia sheeting hook of required length with EPDM seal washer over SS 316 washer/stainless steel Self tapping screw of 6x50 mm with SS hex and 3 mm thick EPDM seal washer complete etc all inclusive of labour, scaffolding, T&P and sundries etc complete as per the directions of Engineer-In-Charge.

Providing and fixing 3.00 mm thick UPVC sheet of trapezoidal profile for cladding and roof at any height, including providing and fixing with SS 304 , 8mm dia sheeting hook of required length with EPDM seal washer over SS 304 washer/ stainless steel Self tapping screw of 6x50 mm with SS hex and 3 mm thick EPDM seal washer complete. Sheets shall have uniform pigmentation and thickness without air pockets. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth. UPVC should be plain white at one face and of approved color at the other face. Net area colvered by sheeting will be measured. Laps will not be paid separately etc. complete and as directed. (Net Area covered by sheeting will be measured. Laps will not be paid separately) Up to 10 m level