Facelifting Renovation of Divisional and Sub Divisional offices of STD Bijbehera

Providing and applying/filling wall putty /white cement/POP of , of approved brand and manufacturer, to fill the voids and gaps on the walls of office to make the surfaces smooth for divisional office at Bijbehera

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on doors,wooden ceiling and windows over an under coat of suitable shade with ordinary paint of approved brand and manufacture for divisional office at Bijbehera

Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) for divisional office at Bijbehera

Providing an fixing wallpaper of approved make and shade complete job as per the directions of engineer incharge for divisional office Bijbehara

Providing and fixing chromium plated brass curtain rod with curtains having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :20mm dia. for divisional office at Bijbehera

Providing and fixing polyster designer graphic printed mat for technical office as per directions of engineer incharge for divisional office Bijbehara

Renovation of electrical wiring by way of providing and fixing of switches lamp wires with required channels and 04 no. of modular plates/switches etc of standard make (, 2.5 mmsq=1 coil , 1.5 mmsq = 1 coil , 6 A/10 A switch/indicator = 10 No. ,bell switch 4, pin socket 6/16 A with switches= 4 No., 32 A switch with socket = 02 No. , 15 w LED hanging lamps with holders = 4 No. for divisional office at Bijbehera

Demolishing cement concrete flooring manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 15.2.1 1:3:6 or richer mix (i/c equivalent design mix) for sub divisional offices at Lazibal

Providing & laying in position cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 25 mm nominal / size) for flooring excluding the cost of centering & shuttering. all work up to plinth level (crushed) for sub divisional offices at Lazibal

Providing an fixing wallpaper of approved make and shade complete job as per the directions of engineer incharge for sub divisional offices at Lazibal

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on (two or more coats) over and including priming coat with water thinnable cement primer including cleaning of surfaces making surface good for applying paint for sub divisional offices at Lazibal

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture for sub divisional offices at Lazibal

Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.for Anantnag sub divisional office at Lazibal

Providing and fixing 25 ltr Electric water Heater/Geyser horizantal storage type including bolts for fixing and connection pipes of standard make for Anantnag sub divisional office at Lazibal

Providing and fixing brass bib cock/Angle cock of approved quality. 15 mm nominal bore for Anantnag sub divisional office at Lazibal

Providing and fixing PVC pipes Single socketed pipe 110 mm dia of high quailty (Type B) including preparing of trenches solvent rubber warshers for Anantnag sub divisional office at Lazibal

Providing and PVC coupler for PVC drainage pipes 100 mm for Anantnag sub divisional office at Lazibal

Providing and fixing single equal Tee (with door) 110x110x110 mm for Anantnag sub divisional office at Lazibal

Providing and fixing PVC bend 87.5° 110 mm bendfor Anantnag sub divisional office at Lazibal

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on doors,wooden ceiling and windows over an under coat/primer of suitable shade with ordinary paint of approved brand and manufacture for sub divisional offices at Lazibal

Providing and fixing polyster designer graphic printed mat for store office as per directions of engineer incharge for Store sub divisional office at Lazibal

Renovation of electrical wiring by way of providing and fixing of 32A socket with switch and modular plates = 06 no. , PVC channels 04 no., 1.5 mmsq cu wire = 90m , pin socket 6/16 A with switches= 2 No. ,15 w LED lamps with required holders = 12,MCB 32A = 01 NO. and MCB 16A = 03 NO. No. all of standard make for sub divisional offices at Lazibal

Please Enable Macros to View BoQ information