8674REPAIRS TO ROOF FOORING JOINERY SANITARY FITTINGS PLASTERING SUNKEN FLOOR ANTI TERMITE TREATMENT AND MISC WORKS AT IMH AREA GANGAMMA CIRCLE CWE OFFICE GE OFFICE 54 CIV AND DSC AREA UNDER AGE B R EAST OF GE M AF STATION JALAHALLI BANG

Amount

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) and all as specified and directed.

All as per item 1 above but exceeding 1.5Sqm but not exceeding 4 Sqm each

Taking down shutters of any description exceeding 1Sqm and not exceeding 2 Sqm each.

Supply and fixing second class hardwood of Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, and all as specified and directed.

Supply and fixing 30mm thick Flush shutter,solid core construction,with block board core and plywood face panels with commercial type on both sides incl hinges as per site requirement complete all as specified and directed.

Supply and fixing 35mm thick hard wood framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated incl hinges as per site requirement and all as specified and directed

Supply and fixing 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats incl hinges as per site requirement and all as specified and directed.

Supply and fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification & drawing.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing..

Supply and fixing 300 mm Al alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts complete all as specified and directed.

All as pe item No 10 above but in repairs

Supply and fixing 150mm Al anodised, barrel tower bolts of extruded section complete all as specified and directed.

All as pe item No 12 above but in repairs

All as per item No 12 here in before but 100mm

Supply and fixing Extruded Aluminium alloy handles, fabricated type, anodised 150mm

All as per item No 15 here in before but in repairs

All as per item No 15 here in before but 100mm

Supply and fixing 100 mm long Stainless steel Butt hinges extruded.

Material and labour for preparation of new wooden surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink wood primer and all as specified and directed.

Supply and fixing stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or serviceable fillets complete as directed by EIC

Supply and fixing in repair stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or old serviceable fillets complete as directed by EIC

Supply and fixingSteel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded and all as specified and directed.

Supply and fixing3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fixing3mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Material and labour preparation on new steel surfaces of any description exc10cm width or girth including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary new oil putty or with existing metal beadings complete.

All as per item No 26 above but figured glass

Supply and fix 5 mm thick plain glass pane to the existing aluminium window/ door of any size including necessary rubber gasket and aluminium clips etc complete including taking down old broken glass pane complete including taking down old one and all as specifeid and directed.

Demolition of Concrete (un reinforced) of any description and in any position not otherwise specifically provided for

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises.

Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor and all as specified and directed.

Material and labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed.

All as per item No 33 hereinbefore but in skirting including necessary cutting of tiles.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed.

Material and labour for ceramic coloured tiles of size 300x200mmx7 to 8 mm thick, on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured / white cement to match the tiles and all as specified and directed.

Material and labour for 25 mm thick PCC (1:2:4 ) type B1 using 20 mm graded stone agg as in sub base of floor ,levelling concrete in roof and complete all as specified and directed.

Taking down rough dressed stone laid in plinth protection/drain walls and removing mortar from and cleaning stones; stacking for measurement including all extra handling and removal and disposing off rubbish

Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 20mm graded stone aggregates as in plinth protection finished fair and even with out using extra cement all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded and pointed in any mortar and all as specified and directed.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in window cill, cooking platform and over 15mm thick rendering in CM (1:4) complete all as specified and as directed.

Demolition of brick work / PCC Block / stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches etc complete

Material and labour pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 .

All as per ser No 43 here-in-before but except block

Material and labour for Modular Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in full brick thick walls built in CM 1:4 complete all as specified and directed.

Material and labour for Modular Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Racking out joints / points in cement mortar to squared rubber masonry coursed or uncoursed

Material and labour for Keyed pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto courss and all as specified and directed.

Taking down cement plaster of any description incl raking out joints, haking for key scrubbing down with water etc complete

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces on external surfaces finished even and smooth without using extra cement and all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as internal surfaces of walls.

Material and labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement and all as specified and directed.

Material and labour for distempering walls with two coats of washable distemper oil emulsion on new surfaes over a coat of alkali resistant priming paint (white or tinted) as directed of distempered and painted surfaces as in preparatory work to give uniform and smooth finish all as specified.

Material and labour for distempering walls with two coats of washable distemper oil emulsion on old surfaes over a coat of 2mm wall care putty incl necc preparation and removal of old distress as directed all as specified

Material and labour for two coats of cement based paint over a coat of primer on newly plastered surfaces of wall including necessary preparation and all as specified and directed.

Material and labour for treating with three coats of whitewash on new surfaes of walls incl necc preparation to give uniform and smooth finish all as specified.

Material and labour for treating walls with three coats of whitewash on new surfaes of ceiling incl nec preparation to give uniform and smooth finish all as specified.

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of white wash and all as specified and directed.

All asper Item No 58 but in ceiling

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of oil emulsion distemper and all as specified and directed.

All as per Item no. 60 but in ceiling.

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of cement based emulsion and all as specified and directed.

Material and labour for preperation of old painted surfaces of steel and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint any tint complete all as specified and directed.

All as per Item No 63 but on wood surfaces

Material and labour for servicing /easing steel windows shutters of size not exceeding 2 Sqm each including cleaning scrapping hacking oiling replacing welding broken hinges making good disturbed portion painting all as specified as directed by Engr-in –charge

Supply and fixing in repairs brass mortise lock (6 levers), vertical type, size 100mm long complete all as specified and directed .

Supply and fixing in repair door closer Al die cast body hydraulically regulated, designation No. 1 universal type, suitable for door shutter complete all as specified and directed .

Supply and fixing in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Taking down defective aluminium door with glass panes and repairing floor stopper, bearing alignment etc. including replacement of any item required for proper functioning and refixing in the same position.

Stripping off tarfelt from old roof surfaces/sunken floor complete all as specified and as directed.

Material and labour for plastering 10mm thick in CM 1:3 on brick or concrete surfaces complete all as specified and as directed.

Material and labour for Applying Oil Bound Bitumen primer at the rate of 0.20kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0 kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5 cm in longitudinal and transfers directions respectively of the reinforcement, tearing strength of 180 N/torch on application including min 10 cm side over lap and 15 cm end lap,incl one coat of aluminum paint over tarfelt of 125ml/sqm and all as specified and directed.

Material and labour Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof, chajjas, coping, bed blocks and similar work including necessary form work.

Supply only Intergral water proofing compound

Taking out steel/plastic/cpvc water tubing and connections including cleaning for refixing 15 mm dia.

All as per item No 75 hereinbefore but 20mm dia.

Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and fixing of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTACPVC complete all as specified.

Supplying fixing of 25mm outer dia CPVC union complete all as specified.

Supplying and fixing of 20mm outer dia CPVC brass elbow and all as specified.

Supply and fixing15 mm dia galvanised steel water tubing medium grade to walls and ceiling or lying in floors incl elbow, union complete all as per site requirement.

All as per item No 82 hereinbefore but 20mm dia.

Supply and fixing in repairs 15 mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of following sizes

Supply and fixing in repair angular stop valve(one way / two way) 15 mm chromium plated concealed, fancy type screwed down high pressure screwed both ends for iron pipe for 15 mm bore.

Supply and fixing in repairs Bib taps fancy type (short / long body) chromium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed complete for 15 mm bore

Supply and fixing in repairs pillar tap with capstan heads chromium palted screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore

S& F in repairs for CP brass health faucet alongwith flexible pipe and stay complete of approved make all as specified and directed.

Supply and fixing in repairs coloured PVC toilet cabinet of size 355x455x90mm with looking mirror in replacement of existing looking mirror/wooden cabninet and repairing the disturbed surfaces to match with existing of approved make.

Supply and fixing in repairs viterous china wash down water closet (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim all as specified

Supply and fixing in repair viterous china squatting pan 'Orissa pattern ' size 580 x 440mm white with integral foot rests incl connecting to 'P' or 'S' trap and to flush pipe antisyphonage pipe etc compete including provn of lime concerte bedding and making good to floor all as specified

Supply and fixing in repairs PVC low level flushing cistern 10 Ltr capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed

Supply and fixing in repairs viterous china wash basin white flat back size 550 x 400 mm including brackets, waste coupling etc all as specified and directed

Supply and fixing in repairs wall mixture incl three joints to steel pipes of 15 mm bore and plugging & screwing to walls and making good the disturbed surfaces of walls to match with existing surfaces all as directed Make: Jaquar

S & F in repairs PVC flexiable pipe (Connecter) 15 mm dia, 450/650 mm long with check nut and bolt with washer all as specified

Supply and fixing in repairs PVC waste pipe 32/40mm bore for WHB & Sink

Supply and fixing of in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Supply and fixing of glass corner shelf as soap dish of size 10 x 10 inch all as spfd and directed.

Dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps and saddles including taking down existing pipes.

All as per item No 101 above but bore of pipe 110 mm

Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm

All as per item No. 103 above but bore of pipe 110 mm with access door

Supply and fixingPVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm

All as per item No . 105 above but bore of pipe 110 mm

Supply and fixing125/ 110 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement

Material and labour for post construction Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes of 12mm dia etc. in apron and all as specified and directed

Material and labour for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors and all as specified and directed

Material and labour for post construction Anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same and all as specified and directed

Dismantling boarding, any description, fixed in any position with nails

Material and labour for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work and all as specified and directed.

Supply and fixing 18/19 mm thick Block boards, grade 2 quality interior grade commercial type, fixed withscrews to timber frame work and all as specified and directed.

Material and labour for for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions incl removal of old.

Supply and fixing30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised.

Supply and fixing 40mm dia, brass cupboard knobs fixed with nut, screw and washer

Supply and fixing140mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed

Material and labour for brass Drawer handles, projection drop (50mm to 65mm) on screwed plate long and all as specified and directed.

Supply and fixing in repairs floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and all as specified and directed.

Supply and fixing in repairs MS chromium plated 25mm dia heavy duty curtain rods and all as specified and directed.

Supply and fixing in repairs stainless steel fancy type curtain brackets and all as specified and directed.

Supply and fixing in repairs Bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed.

Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia 'D' type 60 cm long between flanges

Supply and fixing in repair grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms).

Supply and fixing 125mm bore brass CP grating of approved design fixed with white cement complete as directed including taking down old one.

Supply and fixing in repair shower rose chromium plated 120 mm with or without swirel joints including fixing to steel pipe of 15 mm bore

Material and labour for cleaning the existing tiles joints and filling the tiles hollow joints with white cement including grouting of floor trap surroundings with white cement to the entire satisfaction of the Engr-in-charge.

Supply and fixing in repair spindle of any size for tap,angle/stop valve all as specified and as directed.

Supply and fixing in repairs Stainless steel Plate rack 950mm x 560 mm x 200mm deep with plate racks, spoon holders, shelves etc complete

Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking out old steel sink and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed.

Supply and fixing in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed.

Resecuring or easing and adjusting wooden shutters of any description each without taking down

Dismantling of existing unserviceable water tank and removing, (Capacity 500 Ltr and n. exc. 1000 Ltr) complete all as specified

Dismantling of existing unserviceable water tank and removing, (Capacity 250 Ltr and n. exc. 500 Ltr) complete all as specified

Supply and fixing rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 1000 Ltr capacity incl tank nipple complete all as specified and directed

Supply and fixing rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 500 Ltr capacity incl tank nipple complete all as specified and directed

Material and labour for brass 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

All as per item no 137 above but in repairs

Supply and fixing Material and labour for Mild steel work as in angle Iron, Channel section,flat Iron,tubes for poles incl necc excn fixed indepently incl connecting plates necc weldings etc complete all as specified.

Dismantling of MS work of any description not otherwise described.

Material and labour Cement Concrete 1:2:4 type B-2 (using 40 mm graded crushed stone agg as in foundation filling or for mass concrete complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink wood primer and all as specified and directed.

Vivek Constructions

shashi shekar construction

chowdeshwariconstructionco