25/EUDC (Chowk)/LESA/2024-25

Amount

Safe carriage, loading-unloading with proper stacking of following material from ESC-Daliganj to Work Site/JE -Dump Store –

11KV 3X70/185 SQ MM XLPE CABLE

11KV END TERMINATION O/DOOR & I/DOOR 3X70/185 SQ MM

ST POLE 11 MT LONG

M S EARTHING ROD 20X2500 MM

3.5X240 SQ MM PVC CABLE

11/0.4 KV 250 KVA T/F

DROPPER CHANNEL 10X50 MM

TOP CHANEL 100X50MM

11KV POLYMERIC PIN INSULATOR

11 KV meter Cubicle

11 KV CT & PT Unit

Safe carriage loading unloading with proper stacking of following material from JE dump store to work site.

11KV 3X70/185 SQ MM XLPE CABLE

11KV END TERMINATION O/DOOR & I/DOOR 3X70/185 SQ MM

ST POLE 11 MT LONG

M S EARTHING ROD 20X2500 MM

3.5X240 SQ MM PVC CABLE

11/0.4 KV 250 KVA T/F

DROPPER CHANNEL 10X50 MM

TOP CHANEL 100X50MM

11KV POLYMERIC PIN INSULATOR

11 KV meter Cubicle

11 KV CT & PT Unit

Fabrication & erection of 11KV cable exposure type double pole with the provision of cable with fixing of necessary clamp sand other accessories like danger board, number plate, barbed wire ,2no.channels 100x50mm (1600mmeach), 1no. MS channel 100x50mm (3200 mm in length) for supporting the hoisting of cable & poles. its jumpering by single core PVC aluminium cable with proper size Al.lug after making three phase busbar with help of 11KV pin ,pin insulator and PVC cable.(all material arranged by contractor except steel, pole, PVC aluminium cable & insulator). as per RESPO norms.

Fabrication & erection of S/S type double pole for 11KV line on 11 M long ST pole with fixing of necessary clamps & other accessories.

D/C Cable laying in normal soil by digging of trench 900 mm deep, 500 mm wide/as per site condition including supply of required material as fine sand, 1st class bricks. (All the material required for laying will be supplied by the contractor except 11 KV XLPE cable)

D/C Laying of LT 3.5x240 In HDPE pipe

D/C Laying of 11 KV 3x70/185 sqmm in HDPE Pipe

Hoisting of 11KV XLPE cable 3x70/185 sq mm on double pole with MS pipe 2 M long including its jumpering complete with clamps, nuts and bolts(all material arranged by contractor).

High Pressure testing of 11 KV XLPE cable. Testing equipment will be arranged by the contractor.

Chemical Earthing system with outer pipe diameter 50mm, inner Strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 Kg(As per required) of BFC which should be capable to reducing the soil resistively with good moisture retaining capacity.(Specification of chemical earthing and drawing is hereby enclosed). All material shall by supply by the contractor.

Plinth for RMU

Construction of plinth for 250 KVA Transformer

Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation, commissioning of 250 KVA T/Fs of T/F Plinth and including jumpering with the system (All the required material for above job shall be provided by contractor except T/Fs)

Fencing for 250 Kva Transformer

Providing earthing strip size 50x6mm and connecting from earthing pipe/m.s. earting rod to fuse unit/transformer body/neutral earthing (Earthing rod & earthing strip arranged by contractor).

Fixing of earth rod

Grouting of pole.

Construction of pole plinth.

Painting of new erected ST pole.

Taping of line

Installation and commissioning of CT/PT Metering unit including its connection in between TVM Meter and CT/PT Unit with required size of copper cable. Cable will be arranged by the contractor as his own cost.

Fixing of metering cubicle.

M/s SAMAN ENTERPRISES

P.S. ENTERPRISES