Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-Finance | L1 | Accepted-Finance L1 Bidder | |
| 2 | L2₹33.3 L+₹2.1 L (6.90%)Accepted-Finance | L2 | Accepted-Finance L2 Bidder | |
| 3 | L3₹33.3 L+₹2.2 L (7.05%)Accepted-Finance | L3 | Accepted-Finance L3 Bidder |
Tender Value
₹31.4 L
Closing Date
16 Oct 2021, 2:00 pmClosed
CEO Srinagar Smart City Ltd.
Office of CEO Srinagar Smart City Ltd. 1st Floor Budshah Building Lal Chowk Srinagar
Balanced Work for the Establishment of Food Court at Vendor Zone near Magarmal Bagh Srinagar
2021_SSC_142197_1
E-N.I.T NO. 08-SSCL OF 10-2021 DT. 01-10-2021
Open Tender
Civil Works
Item Rate
30 days
Srinagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,500
CEO Srinagar Smart City Ltd
Exempted
21 Oct 2021
1 Oct 2021
16 Oct 2021
1 Oct 2021
16 Oct 2021
1 Oct 2021
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc.(not exceeding 1.5 m in width) and for shafts, wells,cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil:
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC,carriage of mixed material by tippers to work site, for all leads & lifts,spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
Demolishing brick work in Cement Mortar manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches: Beyond 60 cm girth upto and including 120 cm girth.
Beyond 120 cm girth upto and including 240 cm girth.
Dismantling of CGI sheets
Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns etc.
Providing and fixing scaffolding wherever required as per site requirements, including removal after completion of work, inclusive of all labour, materials and carriage, complete in all respects.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4
Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more. Qty of steel @ 90 Kg/Cum of item 10
Providing Lime Mortar 1 : 1 : 2 (1 lime putty: 1 surkhi: 2 coarse sand) in brick work.all complete as per direction of Engineer-in-charge.
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to steel windows by welding.
Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @0.80litre/10sqm of approved brand and manufacture.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc.complete
Supply and planting following in poly bags/earthen pots well branched,well estabilished and free from disease of 800 mm height plants at site along with required pots of good design etc as required and as per site conditions. 1.Huge Ornamental plants
Supply and planting following in poly bags/earthen pots well branched,well estabilished and free from disease of 500 mm height plants at site along with required pots of good design etc as required and as per site conditions. 1.Ornamental plants
Supply,installation,Testing and Commissioning of Food Kiosk from reputed manufacturer (sample pictures as specified in bid document) of following specifications: Size:-8' x 6' x 9' Structure:-Made by M.S Exterior Material:-Covered by PUF Sandwich Panels Panel thickness:-30 mm Floor R/F Material:-MS Tube (8" x 8") Floor material:-Plywood Colour:-Colour as per photograph attached Table Top:-Made by S.S (Stainless Steel) Drawer:- 1 No.s Cash Drawer,1 for carry bags and 1 for other storage Dustbin:- 2 inbuilt dustbin Electrical:- 2 Nos small LED light and two small fans attached Sides:- 2 side fixed stain-steel/glass on table top (upto 1 ft). Flaps:- 4 side flaps cover open with shocker.3 side half down for customer etc.all complete as per direction of Engineer-in-charge.
Supply, Laying, Testing and Commissioning of Unarmoured PVC Al Cable including making of necessary connections with proper size of Al Thimbles duly crimped with crimping tool in cable trench including excavation and refilling back with a layer of B Class bricks and sand layer Make: Havells or equivalent: 16 sq mm 3.5core
10 sq mm 2core
Supply and Fixing of 25 mm dia Conduit for laying of wires and wiring for conduit incl its allied accessories like bends, J Boxes etc complete.
Supply, Installation, Testing and Commissioning of 30 watt cool LED Flood Light Luminaries of Philip or equivalent make.
Wiring for Loop point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch , modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
Wiring for Heating point with 2.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch , modular plate, suitable GI box and earthing the point with 2.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
Supply, Installation, Testing and Commissioning of 30 watt Track Light of Philip or equivalent make
Supply, Installation, Testing and Commissioning of Track Channel
Supply, Installation, Testing and Commissioning of Traditional Mounted Vintage nature Rustic jute type hanging pendant/ Celling type
LED Strip Light Philip or equivalent make
Adapter for LED Strip
Providing and fixing of furniture of following specifications: Dimension of chair: Chair height=820 mm,Backrest width=380 mm,Width of seat=500 mm,Depth of seat=450 mm,Height of seat=450 mm Metal parts finish=polish Dimension of table: Diameter=1200 mm,Height=1000 mm Product material: Stainless steel and wood No. of chairs:-04 No. of tables: 01 Total seating capacity per table:-04 All complete as per the directions of Engineer- in-charge.
M/S SN CONSTRUCTIONS
TRY US CONTRACTORS AND BUILDERS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .