PROVN OF STORAGE SHED UNDER AGE(I) DALHOUSIE AT MAP ACCN BANIKHET, DALHOUSIE CANTT

Amount

Sch 'A' Part-I B/R:- Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6

M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed.

S&F 2nd class hard wood, plain, solid straight chowkhets and frames, wrought framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints complete.

S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets.

S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.(Make Rajshri Plastiwood limited or Sintex)

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.(Make Rajshri Plastiwood limited or Sintex)

S & F M.S. Flat iron as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc. conforming to Fe 410-0 or F 310-0 complete

M&L PCC 1:2:4 type B-1 (using 20 mm graded aggregate ) as in hold fast.

S&F Steel window or ventilators with top hung shutter including hinges,steel pegstay complete all as specifid and directed

3mm thick sheet glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed.

S&F 150mm long aluminium handles cast type, anodised and fitted.

M&L two coats of synathetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10 cms width or girth incl preparation of surfaces.

Reinforced cement concretetc M-25(Design mix) using 20mm graded stone aggregate as in floor or roof beams

Use and waste of formwork for foundation beams floor beam roof beam etc as in lintel over 1.5m clear span. for rough finished surfaces

Mild steel TMT bars 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beams,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement.

Preparing newly plastered surfaces of walls and applying three coats of white wash.

M&L for non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm , in floors etc . Set and jointed in neat cement slurry and pointed in while or coloured cement to match etc all as specified. (Make: Kajaria , Cera ,Somani)

M&L for screed bed or bedding layer of mortar 1:6 15mm thick for laying floor finishes etc all as specified.

M&L glazed, coloured, ceramic, tiles of size (450mm x 350 mm) x 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.

M&L for 10mm thick rendering in cement moratr 1:4 as in backing coat for skirting/dados etc all as specified.

S&F vitreous China wash down water closet semi-pedestal pattern (Anglo-Indian Type) pan (pedestal pattern) white, excluding flushing cistern & flush pipe .

S&F in repairs, self cleaning water jet, chromium plated, (HEALTHFUSET)15 mm bore with all accessories complete suitable for EWC as approved.

S& F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe..(Make: Jaguar, Parry ware or Cera).

S&F in repair vitreous china wash basin agle back, size 600x480 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed .(Make: Jaguar or Parry ware )

S&F in the wall soap dish, vitrious china white, approximate size 160x160x90 in repairs

S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

S & F in repair 15mm bore Bib taps, chromium plated fancy type with crutch or butterfly handle, screwed down screwed for brass ferrule and fixed.(Make Jaguar, ESS ESS OR GEM MARC).

S & F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe

S&F in repair 15mm bore Stop valve fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed bath ends for iron pipe or fixed union and fixed.(Make Jaguar, ESS ESS OR GEM MARC).

Grating doom round 140mm size of PTMT (minimum weight 50gms)

S&F in brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flage.

PVC connection 15mm size with PTMT nuts of length 600mm

S&F 500 ltr capacity Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, water staging etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Preparing new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.

S & F 110mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.

S & F 75 mm bore PVC (SWR) bends any radius.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 110 mm bore pipe as directed.

Sch 'A' Part-II E/M:-M & L for point wiring with copper conductor single core cable FRLS multistrand, PVC unsheathed 1.5 Sqmm size for one light point or bell point controlled by one switch including one run of 1.5 Sqmm single core multistrand PVC unsheathed copper conductor cable FRLS for earth continuity in and including concealed PVC conduit non rigid of approved size, make and quality ISI marked, including providing suitable size of copper lugs all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading "Point wiring'".fixed on walls/ceiling including sunk cast iron boxes flushing (grouting)/ concealing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and directed.Note:-quoted rates include cutting/chasing into wall/floor of brick/stone masonry and making good the existing surface with cement mortar 1:4

All as per Srl item No 47 here in before but for one 5 amps socket out let on same board.

All as per Srl item No 47 here in before but for one 5 amps socket out let on independent board,

All as per item No 47 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor single core cable FRLS multistrand unsheathed 2.5 Sqmm on independent board including one run of 1.5 Sqmm single core multistrand PVC unsheathed copper conductor cable FRLS for earth continuity in and including PVC cancealed conduit of appropriate size makes,and best quality ISI marked, including CI/Pressed steel sunk box and providing suitable size of copper lugs all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed on wall including sunk cast iron boxes flushing (grouting)/concealing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.

Supply & Fixing Switch piano, flush button, single pole one way 5 amps.

Supply & Fixing Socket outlet 5 pin, 5 amps flush type.

Supply & Fixing Switch piano, flush button, single pole one way 15 amps

Supply & Fixing Socket outlet 2 in 1,3 pin 5 and 15 amps flush type.

Supply and fix ceiling rose 65X50 mm two to three terminals complete all as specified.

Supply and fix lamp holder B22 PVC/Polycarbonate type with back plate for batten/angle fitting.

S&F in repair Wall mounted LED integrateg batten fitting T5, 20 W LED, 4 feet, PVC extruded. Of make Havells Cat part No LHEXBXPNIN1W020/ C&S cat part No. LTTB 4F20WLED P/W /Crompton Cat part No. LDLSR20-CDL including square box and all accessories complete all as specifiedand as directed,

S&F LED lamp 7watt, Catpart No. LHLDERUEML8X007 of havells or equivalent in Philips/Bajaj complete all as specifiedand as directed,

S&F bulk head light fitting with LED lamp 9Watt complete all as specified.

S&F in repair Wall mounted LED integrateg batten fitting T5, 10W LED, 2 feet, PVC extruded.of make Havells Cat part No LHEXBXPNIN1W010/ C&S cat part No. LTTB 2F 10W LED P/W / Crompton Cat part No. LDLSR10-CDL including square box and all accessories complete all as specifiedand as directed,

S&F LED mirror optics liner & compact 9W mirror light with decorative gray end cap, polycorbonate body and ribbed opel diffuser complete all as specified and as directed

Supply & Fixing Sheet metal enclosure for DB,s, double door (when MCB,s to be used) single pole & neutral 4 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's kitkat fuse/MCB SPN/SP as directed by Engineer-in-charge. Cat Part No CSDBSPNSD04 of C&S or equivalent in Havells/Legrand/ABB complete all as specifiedand as directed,

Supply and fixing inreplacement MCB single pole and neutral 6 to 32 Amps, 240 volts complete all as specified and directed. Make Havells Cat Part No DHMGCSNF006-32/ C&S cat part No CSMBS1C6N TO CSMBS1C32N/ Legrand Cat part No. 4086 09 06 to 4086 17 032

Supply and fixing inreplacement MCB single pole 6 to 32 Amps, 240 volts all as specified and directed. Make Havells Cat Part No DHMGCSPF006-32/ C&S cat part No CSMBS1C6 to CSMBS1C32/ Legrand Cat part No. 4085 87 06 to 4085 95 032

Earthing complete in any type of soil hard(rocky soil) /soft with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.50 metres below ground level, connected to galvanised iron wire of size 4 sqmm (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 40 mm bore including provn of concrete pit in plain cement concrete M-15 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of rainforced cement concrete M-15 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 No's and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering, perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point including taking out existing unservicable earthing all as specified and testing on completion.

S&F exhaust fan 300mm sweep matelic body complete with louvers including making suitable hole and all fixing accessories such as nut, bolts, washers, mounting pad etc. upto connection all as specified and directed by Engineer-in-Chagre.Make:-havells/Bajaj/Crompton

S&F street light bracket made out of 25mm dia light grade GI pipe 1.5m long bent in shape required fixed to wall/pole with two nos MS clamps made out of 25mmx4mm flat iron including nut ,bolt and washers all as specified and directed by Engineer-in-Chagre

S&F building street light luminaire, LED street light 25 Watt, IP66 powder coated pressure dia cast aluminium comact high power LED street light with heat resistent toughhened glass 2360.76lm, lED constent driver, power factor 0.97, THD>55%. Cat part No. LSTO-25-CDL of crompton or equivalent in Phillips/havells

Supply and installation electric water storage heater(Geyser),25 liter capacity, 5star rated, including grouting of nuts and bolt/anchor hold fastner and drilling on any type of surface/wall for fixing arrengments including two nos. of PVC connection 450mm long complete all as specified and directed by Engineer-in-Chagre. Make:-Havells/Bajaj/Crompton

Excavation in trench n.exc 1.5 mtr wide and n.exc 1.5 mtr depth for taking out/laying of cable etc including getting out in any type of soil and taking out bricks and cable complete all as directed by Engr in Charge.

Removing of surplus excavated soil n exc 50 mtrs and depositing where directed at a level n. exc 1.5 mtr above the staring point all as specified and directed by Engr in Charge.

Returning filling–in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engr in Charge.

M&L for 20 mm GI tubing medium grade galvanized with all fittings such as tee, bend, elbow, reducer etc for making new connection including conceling of of GI pipe on wall and connection complete all as specified and directed by Engr-In-Charge.

Cutting of existing pipe line of 25/40mm dia pipe inserting tee for making connection of 20mm bore pipe including all require fitting for making connection new pipe line from existing pipe line complete all as specified and directed by Engr in Charge.

S&F stop cock cost copper alloy 20mm bore screwed down , high pressure with clutch or duty free handle screwed both ends for iron pipe complete all as specified and directed by Engr in Charge.

Supply and Laying or passing through pipe only and testing 1100 volts grade heavy duty XLPE Cable insulated armoured cable with alluminium conductor , armoured wtih GI Strip or wire and over all PVC sheathed of 10 sqmm, 2 core all as specified and directed by Engineer-in-Chagre.

M&L for 40 mm GI tubing light grade galvanized with all fittings for protection to U/G cable along poles, walls, flows, road crossing including necessary cutting of road and making good in original surface where required all as specified and directed by Engr-In-Charge. Note:-cutting of road, making good in original surface with PCC 1:3:6 deemed to be included in quoted rate

Material and labour for sand cushioning to underground cable 8 cm thick layers below the cable and 15 cm thick above the cable in trenches using fine screened river sand complete all as specified and directed by Engr in Charge. (Note:-Punned thickness shall be measured and paid)

Material and labour for well burnt sub class 'B' bricks of nominal size 230X115X075 mm abutting each other for cable protection all as specified and directed by Engr in Charge.

Havish Construction