Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹6.3 L+₹1,609.81 (0.26%)Rejected-AOC MURSTEY COLONY PLOT NO 16 LEH 194101 LADAKH | LEH LADAKH | LADAKH | 194101 | L2 | Rejected-AOC Rejected being L2 |
Tender Value
₹7 L
EMD Value
₹14,000
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PARTAPUR
GE PARTAPUR
PROVISION OF 02 X BATHROOM AND 02 X TIOLET WITH HEATING ARRANGEMENTS AND PROVISION OF HOT WATER AT ZPB AND TC UNDER AGE BR-I OF GE PRATAPUR
2023_MES_574349_1
GE/P-74/2022-23
Open Tender
Civil Works
Works
183 days
GE PARTAPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE PARTAPUR
₹14,000
Yes
25 Feb 2023
11 Jan 2023
13 Feb 2023
11 Jan 2023
11 Feb 2023
24 Jan 2023
11 Jan 2023 - 16 Jan 2023
Amount
Surface dresssing nexc 30cm deep and averaging 15cm deep in hard/dense soil and getting out.
Excavation in trenches n.exc 1.5 mtr wide & n.exc 1.5 mtr deep in hard/dense soil and getting out.
M&L for Cement concrete Type D-2, 1:4:8 mix using 40mm graded stone aggregae as in foundation fillings, mass concrete complete all as specified and directed.
M&L Precast cement concrete block masonry with solid blocks exc 20 cm in width and set in cm 1:6, type C1 1:3:6 (20 mm graded aggregate).
M&L for RCC M-30 (Design Mix) (20mm graded aggregates) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs,under-reamed piles and mass concrete.
M&L for RCC M-30 (Design Mix) (20mm graded aggregates) in Columns,pillars, piers, posts and struts complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm Thk in soft soil.
Removing excavated materialn. exc 50m and depositing where directed at a level n exc. 1.5m above the starting point
M&L for RCC M-30 (Design Mix) (20mm graded aggregates) in Beams, cantilevers,bressummers, lintels over 1.5m span all as Specified.
M&L for RCC M-30 (Design Mix) (20mm graded aggregates) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, complete all as specified.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work.
M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions for fair finish, complete all as specified and directed.
M&L for Formwork to soffits of flat surface suspended slabs such as roof slabs,floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finish surface complete all as specified.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunch-ings, lintels, cantilevers, shelves including sup- ports, overhangs, etc. complete all as specified and directed.
M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finishing the surface fair and even Complete all as specified and directed.
M&L 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finsihed the surfaces even and fair without using extra cement.
M&L 5mm thick rendering on concrete surfaces in cement mortar 1:3 , as in ceiling, finsihed the surfaces even and smooth without using extra cement.
M&L Preparing of new surface of plaster and applying two coats of white wash on wall.
M&L for Preparing of new plastered surface and applying two coats cement base paints on walls.
M&L Preparing of new surface of plaster and applying three coats of white wash on ceiling.
S&F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete
Preparation of new surfaces of steel surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain glover PVC sheet reinforced with MS square tube in opening as per specification and drawing.
S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.
M&L 75mm Thk. PCC 1:4:8 type D2 under flooring , using 40mm graded stone aggregates as in sub base complete all as specified and directed.
M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floor complete all as specified and directed.
M&L Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:4)
M&L for coloured glazed ceramic tiles in vertical surface 300X200X7 mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:3 and pointed in white to match complete.
M&L for steel TMT bars, 10 mm dia and over , cut to length, bent to required shape including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete
- Ditto as per above item but 6mm to 8mm dia.
M&L 15mm thick rendering on terrace, sides of parapet in cement mortar 1:4 with water proofing compound, finished even and fair.
S&F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100mm long all as specified.
S&F for 150mm aluminium anodised barrel tower bolts of extruded section all as specified.
S& F for 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F for 125mm aluminium handles, cast type ,anodised and pattern/design as approved.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in paving / plinth protection finished even and smooth , without using extra cement incl necessary form work complete all as.
S & F puff water tank 1000 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed.
S&F vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern along with wc connector incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete.
S&F wash basin vitreous china white flat black size 550x400mm including brackets complete and waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms)
S & F Vitreous China urinals size465 x 355 x 265 mm white (minimum),bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe alongwith fixing of 32 mm dia coupling complete
S & F Vitreous China urinals partition white of size 310 x700 mm with connection complete
S&F PVC low level flushing cistern 10 ltrs capacity, white symphonic action with ball valve, float and handle including flush pipe and brackets.
S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm Complete.
S&F Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as directed and specified.
S&F PVC waste pipe 750mm long with cap of 32mm bore dia waste coupling
S & F PVC connection 600 mm long with two brass coupline.Pipe of 15mm dia of pressure tating 6kgs/Cm2 complete all as specified
S&F grating doom 100mm dia PT MT weight 25gms
S&F Brass chromium plated tubular towel rail, 20mm dia between flanges complete all as specified and directed.
S&F 3-layer PP-R Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia complete all as specified and directed.
S&F Stop/angle cock 15mm bore, fancy type cast copper alloy chromium plated , screwed down, high pressure, with crutch or butter- fly handle, screwed both ends for iron pipe or for unions and fixed.
S&F 15mm bore pillar taps cast copper allow with screwed shancks and fixed complete all as specified and as directed.
S&F 15mm dia bib taps,cast copper alloy with crutch or butter fly and screwed for iron pipe or for brass ferrule and fixed.
S&F for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .
M&L 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.
S&F PVC (SWR) 110mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors.
S & F PVC (SWR) 110mm dia mtr bends any radius
S & F 110 mm PVC (SWR) junction (single T) equal or unequal complete
S&F PVC (SWR) 75 mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors.
Constr of soakage well incl excavation in hard/dense soil, PCC 1:3:6 type C2,(using 40mm graded crushed stone aggregate) in foundation, hone combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M-25/ SFRC cover, inter connecting pipes of RCC /DWC complete filled with brick bat of size (3.00 mtr dia x 4.50 mtr deep).
Plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes incl packing under and hauching against the side of pipes after they are laid and tested for 150mm bore SGSW pipes complete Note-Thickness of concrete bed shall be 100mm.
S&F 150mm dia SGSW pipe laid in trenches and jointed as specified
S&F 100 mm dia cast iron soil, waste and vent pipes in any length as specified.
M & L pre cast cement concrete block masonry solid blocks type C1 1:3:6 ( 20 mm graded aggregate) exceeding 10 cm width , set in CM 1:4 as in manholes all as specified and directed.
M&L Pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:4 complete all as specified.
M&L cement concrete type B0 1:2:4 (12.5 mm graded aggregate ) in cills, steps, seismic and other similar bands, plinth courses , string courses, lacing courses, parapets and railings upto 60 cm in height, copings kneelers, apex stones, bed plates, kerbs etc all as specified and directed.
Supply, laying , testing & commissioning cable 1100 volts grade XLPE insulated armoured heavy duty electric cable with stranded aluminium conductor ISI marked incl cable glands, lugs etc to suit the cable size to be laid in trenches, fixed along pole, LT panel through GI pipe laid under floors fixed concealed in wall encased in GI pipe etc complete of size 10 Sqmm 2 Core, complete all as specified and as directed by Engr-in-Charge.
M & L Sand cushioning to the under ground electric cable 8 cm before laying the cable and 15 cm after laying the cable complete all as specified in clause no 19.75 of SSR Part-1 2009, complete ass as specified and as directed by Engineer-in charge
M & L for Un-reinforced precast factory made concrete cable covers, class LV Type-I, with flat size 250 x 150 x 40 mm complete all as specified and directed by Engineer-in-charge.
S&F of water heating system/Hamam of capacity 300 Ltrs with Diesel/kerosene burner of 5 inch with boiler and Diesel/kerosene tank Inner sheet made of 10 SWG mild steel sheet and outer sheet shall be made of 16 SWG of mild steel sheet. Glass wool insulation of 25mm thickness to be provided between outer and inner sheet. 100mm dia MS pipes is to be be fitted in centre which will act as heater. One direct water connection for inlet of water. Funnel for pouring water manually to be provided. One over flow pipe, 3 outlet of hot water from the boiler to be provided. Inner chamber is to be painted with boiler paint and external steel surface are to be painted with two coats of synthetic enamel paint over a coat of red oxide incl necessary components like stand for hamam, stand for fuel tank and fuel pipe for connecting burner, diesel/kerosene tank etc, complete all as specified and directed by Engineer-in-Charge.
M&L Point wiring with 1.5sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts cable and including PVC casing and caping suitable size (as per conductor run) with all fittings and accessories and including PVC insulated, un sheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core green colour) cable as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated sheet (Make 0 Hylum) complete all as specified and directed by Engineer-in-Charge. Note:- Screws used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.
One light point controlled by one, one way switch
One 3 pin socket out let 5 Amps on same board
All as per item No 71 above but for one 3 pin socket outlet 15 Amps independent with cable of size 2.5 Sqmm for point wiring and 1.5 sqmm in continuous earth wire complete all as specified and directed by Engr-in-Charge.
S&F Switch Piano 5 Amps flush type single pole one way complete all as specified and directed by Engineer-in-Charge.
S&F switch socket combination 5 pin, 5 Amps 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin pulg. Complete all as specified and directed by Engineer-in-Chage.
S&F switch socket combination 2 in 1, 3 pin, 15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.
S&F ceiling rose surface bakelite 65x50mm two to three therminal conforming to ISI. Complete all as specified ans as directed by Engineer-in-Charge.
12. Supply and fixing Rechargeable LED Bulb energy saver 9 W ,B22 (220-240 V) 50 hz, 6500k, fast charging 2200 mAH battery inbuild ,white color all as specified and as directed. Make- Phillips stellar bright or equivalent
S&F Decorative ultra slim round profile LED lighting 1x20 Watt 230 V fixture with extruded polycarbonate, environmental friendly, energy efficient surface /wall mounted prewired connnecting up with three core twisted flexible copper wire with suitable size complete all as specified.Make Havells cat part No: LHEXBLP7PN1W020 or eqivalent model of CG/ Bajaj.
S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.
M&L 6 to 40 Amps MCB SP ( ISI Marked) 50 C/S 10 KA 'C' sereis complete all as specified.
S&F MCB 40 Amp SPN 50 C/S 10 KA 'C' sereis complete all as specified all as directed
Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2..25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below the normal ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering all as shown in electrc plate No 5 connected to earth test point. 40mm thick pre cast RCC M-15 ( Nominal mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40X40X3mm frame for cover, PCC chamber in cement concrete M-15 ( Nominal mix) , excavation and earth work in any type of soil and connected all as specified and as directed by Engineer-in-charge.
Supply and fix exhaust fan 250 mm sweep plastic type (make-Havells venti air DX or equivalent) all as directed and specified.
Deduct Schedule of Credit of Rs (-) NIL (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.
M/S SHAMSHER ALI SUFI
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .