ANNUAL REPAIR/UPKEEPING/MAINT OF GENERATING SET, AMF PANEL, CRAINE AND COMPRESSOR ETC, WITH CONNECTED ITEMS AT NEW CANTT AND CHHEOKI STATION UNDER GE (WEST) PRAYAGRAJ.

Amount

M&L for periodical servicing of diesel engine driven Gen set 3 phase 415 volts 50 c/s AC supply by cleaning thoroughly and replacing fuel filters ,air filters, oil filters draining out engine oil etc. and replacing with new oil, tightening of all gaskets , connection of battery terminals, electric cable connections foundation bolts, coupling bolts etc including test running and tappet setting of alternator by checking and setting of voltage and frequency all as directed by Engr-in-charge. Make of DG Set:- Kirloskar/ Crompton greaves/Cummins. Make of filters : kirloskar/CG/Fleet guard/MICO Note:- Engine oil, Fuel filters, Air filters, oil filters replaced will be measured and paid separately under respective item of sch 'A' . for following capacities of DG set

500 KVA DG Set.

320 to 400 KVA DG Set.

200 to 250 KVA DG Set.

82.5 to 100 KVA DG Set.

62.5/63 KVA DG Set.

25 to 40 KVA DG Set.

25/30 KVA DG Set.

7.5 to 15 KVA DG Set

Supply and fixing in replacement of maintenance free battery with initially charged capacity 180 AH , 12 Volt complete all as specified and as directed. Make :- Exide/Amron

Supply and fixing in replacement of maintenance free battery with initially charged capacity 150 AH , 12 Volt complete all as specified and as directed. Make :- Exide/Amron

Supply and fixing in replacement of maintenance free battery with initially charged capacity 90 AH , 12 Volt complete all as specified and as directed. Make :- Exide/Amron

Supply, fixing & testing in replacement of Radiator of 320 to 500 KVA DG Set water cooled of kirlokar make with copper tubings including replacement of connected items such as inlet & outlet rubber hoses & all other connected items.

All as per item No. 5 above but Cap 100 to 250 KVA.

All as per item No. 5 above but Cap 40 to 62.5/63 KVA.

All as per item No. 5 above but Cap 15 to 25 KVA.

M&L for replacement of UNSV radiator hose pipe set complete as per sample of DG set of following capacity:-

400 to 500 KVA DG Set.

200 to 320 KVA DG Set.

100 to 160 KVA DG Set .

63/62.5 KVA DG Set .

40/50 KVA DG Set .

15 to 25 KVA DG Set .

M&L for replacement of UNSV fan belts as per sample for DG sets of following capacity:-

400 to 500 KVA DG Set.

200 to 320 KVA DG Set.

100 to 160 KVA DG Set .

63/62.5 KVA DG Set .

40/50 KVA DG Set .

15 to 25 KVA DG Set .

M&L in replacement of stranded copper conductor battery lead for 24 volts D C grade red for (+)ve terminal and black for (-)ve terminal fitted with battery terminal at one end & battery lug at other end of length 1.5 mtr, complete all as specified and directed.

M&L for cleaning of radiator by cleaning agent/ Radiwash (make:fleetguard/ coolguard) including removal/ dismantling of radiator from engine transporting to work shop or cleaned at site , soldering / brazing,testing for any leakage , remounting to its original position as per entire satisfaction of Engr - in-charge for following capacity of DG Set.

500 KVA DG Set.

320 to 400 KVA DG Set.

200 to 250 KVA DG Set.

82.5 to 100 KVA DG Set.

62.5/63 KVA DG Set.

40/50 KVA DG Set.

25/30 KVA DG Set.

7.5 to 15 KVA DG Set.

M&L for replacement of set of hose clips for DG sets of following capacity:-

500 KVA DG Set.

320 to 400 KVA DG Set.

200 to 250 KVA DG Set.

82.5 to 100 KVA DG Set.

62.5/63 KVA DG Set.

40/50 KVA DG Set.

25/30 KVA DG Set.

7.5 to 15 KVA DG Set.

M&L to drain out the old used engine oil from sump of DG sets & cleaning & refilling with new engine oil 15 W 40 up to required level including topup complete all as specified and as directed. Make : Castrol/ HP or equivalent of Servo

M&L for coolant radicool SFO premix of castrol or equivalent of shell/Volvoline complete all as specified and as directed.

M&L for replacement of defective self starter assembly by new self starter assembly 12/24 volts complete all as specified and as directed. Make:- lucas Cat Part No. 03.034.101 / Bosch

All as per item No. 13 above but alternator assembly complete all as specified and as directed. Make Lucas Cat partv No. 03.130.01 or equivalent Cat part of make Boss/PMG

Supply & fixing of micro processer start/stop control PCB panel for following cap of DG set by taking out unserviceable relay complete with following parameters. Make: Kirlosker/ Greaves /Cummins (a) Individual phase current (Amps) (b) Phase voltages (V) (c ) Generator output frequency (Hz) (d) Engine water temperature (Deg.C) (e) Lube oil pressure (kpa) (f) Working hours (g) Push button (Starter) & (stop) (h) LED indications for main function

400 to 500 KVA DG Set.

250 to 320 KVA DG Set.

100 to 160 KVA DG Set.

62.5 to 82.5 KVA DG Set.

15 to 40 KVA DG Set

M&L in for replacement of PCB card for DG set AMF pannel for following capacity:-

400 to 500 KVA DG Set.

250 to 320 KVA DG Set.

100 to 160 KVA DG Set.

62.5 to 82.5 KVA DG Set.

Supply and fixing in replacement of MCCB 100 Amps, 415 Volts, 3 Pole, breaking capacity 16 KA, ISI Marked, Fix type, complete all as specified and directed.

Supply and fixing in replacement of MCCB 200 Amps, 415 Volts, 4 Pole, breaking capacity 36KA, ISI Marked, Fix/ Adjustable type complete all as specified and directed.

Supply and fixing in replacement of MCCB 250 Amps, 415 Volts, 4 Pole, breaking capacity 36KA, ISI Marked, Fix/ Adjustable type complete all as specified and directed.

Supply and fixing in replacement of MCCB 350 to 400 Amps, 415 Volts, 4 Pole, breaking capacity 36KA, ISI Marked, Fix/ Adjustable type. complete all as specified and directed.

Supply and fixing in replacement of MCCB 500 Amps, 415 Volts, 4 Pole, breaking capacity 36KA, ISI Marked, Fix/ Adjustable type complete all as specified and directed.

M&L in for replacement of timer switch 0 to 80 seconds Make Siemens for 25/100 KVA AMF pannel complete all as specified and directed.

M&L in for replacement of timer switch 0 to 80 seconds Make Siemens for 200/500 KVA AMF pannel complete all as specified and directed.

M&L for servicing of DG set 320/500 KVA AMF panel,setting of time delay switch ,tightening of all electrical incoming & outgoing connections including replacement of cable lugs& adjustment of solenoid switches& Relays complete all as specified and directed.

M&L for servicing of DG set 200/250 KVA AMF panel,setting of time delay switch ,tightening of all electrical incoming & outgoing connections including replacement of cable lugs& adjustment of solenoid switches& Relays complete all as specified and directed.

M&L for servicing of DG set 100/160 KVA AMF panel,setting of time delay switch ,tightening of all electrical incoming & outgoing connections including replacement of cable lugs& adjustment of solenoid switches& Relays complete all as specified and directed.

M&L for servicing of DG set 15/62.5 KVA AMF panel,setting of time delay switch ,tightening of all electrical incoming & outgoing connections including replacement of cable lugs& adjustment of solenoid switches& Relays complete all as specified and directed.

M&L for painting of Generating set of capacity 250 KVA to 500 KVA complete in existing colour with two coat of synthetic enamelled paint by spray machine over one coat of primer after preparation of surfaces installed at Hisar Mil Stn complete all as specified and as directed.

M&L for painting of Generating set of capacity 7.5 KVA to 100 KVA complete in existing colour with two coat of synthetic enamelled paint with spray machine over one coat of primer after preparation of surfaces installed at western & eastern pocket drainage pump House complete all as specified and as directed.

Supply and replacing in repair Euroload four pole change over with advance Neutral On load change over switch I-O-II ,Current Rating 100 Amps, 415 Volts complete all as specified and directed.

Supply and replacing in repair Euroload four pole change over with advance Neutral On load change over switch I-O-II ,Current Rating 200 Amps,415 Volts complete all as specified and directed.

Supply and replacing in repair Euroload four pole change over with advance Neutral On load change over switch I-O-II ,Current Rating 400/630 Amps, 415 Volts complete all as specified and directed.

Supply only Diesel Filter suitable for 40 KVA to 100 KVA DG set complete all as specified and directed. Make: - Kirloskar/CG/KG/Cummins

Supply only Diesel Filter suitable for 200 KVA to 320 KVA DG set complete all as specified and directed. Make: - Kirloskar/CG/KG/Cummins

Supply only Diesel Filter suitable for 400 KVA to 500 KVA DG set complete all as specified and directed. Make: - Kirloskar/CG/KG/Cummins

Supply only Lub Oil filter suitable for 40 KVA to 100 KVA DG set complete all as specified and directed. Make: - Kirloskar/CG/KG/Cummins

Supply only Lub Oil Filter suitable for 200 KVA to 320 KVA DG set complete all as specified and directed. Make: - Kirloskar/CG/KG/Cummins

Supply only Lub Oil Filter suitable for 400 KVA to 500 KVA DG set complete all as specified and directed. Make: - Kirloskar/CG/KG/Cummins

Supply only Air filter suitable for 40 KVA to 100 KVA DG set complete all as specified and directed. Make :- Kirloskar/CG/KG/Cummins

Supply only Air Filter suitable for 200 KVA to 320 KVA DG set complete all as specified and directed. Make :- Kirloskar/CG/KG/Cummins

Supply only Air Filter suitable for 400 KVA to 500 KVA DG set complete all as specified and directed. Make: - Kirloskar/CG/KG/Cummins

Supply only spare parts & accessories of original make for repair of DG set 100 to 250 KVA under serial Item No 1.00 all as directed by Engr-in-Charge :- Notes :- All spares & accessories shall be fixed in the DG set only after prior inspection & Approval of Engineer-in-Charge for which these shall be produced by the contractor at store yard of AGE E/M New Cantt .

Kit bypass filter

Upper Gasket set (Cylinder head)

Valve exhaust

Valve inlet

Valve seat Exhaust

Valve seat Inlet

Guide valve

Collet Valve

Spring valve

Kit turbo charging

Kit injector

Kit Piston and ring set

Kit Cylinder liner

Kit Sump Gasket

Gear pump assembly (Fuel pump FIP)

Gasket Set

Gear assembly

Ball bering/roller bearing

Head gasket

Nozzle

Liner

Battery terminal

Packing Kit

Crank

Main bearing

CR bearing

Came bush

Connecting Rod

Rod balancing

Third washer

Valve seal

Supply & fixing spare parts & accessories of original make for repair of DG set 40 to 82.5 KVA under serial items No 1.00 here-in-before all as directed by Engr-in-Charge :- Note :- All spares & accessories shall be fixed in the DG set only after prior inspection & Approval of Engineer-in-Charge for which these shall be produced by the contractor at store yard of AGE E/M New Cantt

Kit Fuel filter

Kit Lub oil filter

Kit bypass filter

Kit Air cleaner

Air filter

Upper Gasket set (Cylinder head)

Valve exhaust

Valve inlet

Valve seat Exhaust

Valve seat Inlet

Guide valve

Collet valve

Spring valve

Kit turbo charging

Kit injector repair

Kit Piston and ring set

Kit Cylinder liner

Kit Sump Gasket

Gear pump assembly (Fuel pump FIP)

Gasket Set

Gear assembly

Ball bering

Head gasket

Nozzle

Liner

Battery terminal

Packing Kit

Crank

Main bearing

CR bearing

Came bush

Connecting Rod

Rod balancing

Third washer

Valve seal

Dismantling of DG Set Alternator of cap 63/62.5 KVA carefully and carry to authorised workshop for repair and re-fixing the same in its original position after repair and testing the same up to satisfaction of AGE E/M complete all as specified and directed.

Cutting out old burnt winding of alternator, cleaning the slot of starter and rewinding the same with super enamelled copper winding wire of appropriate gauge complete with all insulating materials, Nomex paper, cotton tape, glass sleeve, soldering rod, Grease etc for 62.5/63 KVA DG set complete all as specified and directed.

Repairing of armature shaft both side by depositing metal on it, grinding & polishing to make appropriate size of the shaft complete all as specified and directed.

Supply and replacing Ball bearing at DE (Driven End) side of No.6310 complete all as specified and directed. Make:- NBC/SKF-01 No for 63/62.05 KVA

Supply and replacing rectifier Diod for 63/62.5 KVA complete all as specified and directed.

Supply and replacing AVR (Automatic Voltage Regulaotr) for 63/62.5 KVA complete all as specified and directed.

Supply and replacing connetion plate of suitable size for 63/62.5 KVA complete all as specified and directed.

Dismantling of DG Set Alternator of cap 100 to 250 KVA carefully and carry to authorised workshop for repair and re-fixing the same in its original position after repair and testing the same up to satisfaction of AGE E/M complete all as direted.-01No.

Cutting out old burnt winding of alternator, cleaning the slot of stator and rewinding the same with super enamelled copper winding wire of appropriate gauge complete with all insulating materials, Nomex paper, cotton tape, glass sleeve, soldering rod, Grease etc for 100/200/250 KVA size complete all as specified and directed.

Repairing of armature shaft both side by depositing metal on it, grinding & polishing to make appropriate size of the shaft for 100/200/250 KVA size complete all as specified and directed.

Supply and replacing Ball bearing at DE (Driven End) side of No.6310 /6311/6312/6314 complete all as specified and directed. Make:- NBC/SKF-01 No for 100/200/250 KVA size.

Supply and replacing rectifier Diod for 100/200/250 KVA size complete all as specified and directed.

Supply and replacing AVR (Automatic Voltage Regulaotr) for 100/200/250 KVA size complete all as specified and directed.

Supply and replacing connetion plate of suitable size complete all as specified and directed.

Dismantling of DG Set Alternator of cap 15/25/40 KVA carefully and carry to authorised workshop for repair and re-fixing the same in its original position after repair and testing the same up to satisfaction of AGE E/M complete all as direted

Cutting out old burnt winding of alternator, cleaning the slot of stator and rewinding the same with super enamelled copper winding wire of appropriate gauge complete with all insulating materials, Nomex paper, cotton tape, glass sleeve, soldering rod, Grease etc for 15/25/40 KVA, complete all as specified and directed.

Repairing of armature shaft both side by depositing metal on it, grinding & polishing to make appropriate size of the shaft for 15/25/40 KVA complete all as specified and directed.

Supply and replacing Ball bearing at DE (Driven End) side of No.6310 /6311/6312/6314 Make:- NBC/SKF-01 No for 25/40/62.5 KVA.

Supply and replacing rectifier Diod for 25/40/62.5 KVA complete all as specified and directed.

Supply and replacing AVR (Automatic Voltage Regulaotr) for 25/40/62.5 KVA complete all as specified and directed.

Supply and replacing connetion plate of suitable for 15 to140 KVA size complete all as specified and directed.

Dismantling of DG Set Alternator of cap 320 to 500 KVA carefully and carry to authorised workshop for repair and re-fixing the same in its original position after repair and testing the same up to satisfaction of AGE E/M complete all as specified and directed.

Cutting out old burnt winding of alternator, cleaning the slot of stator and rewinding the same with super enamelled copper winding wire of appropriate gauge complete with all insulating materials, Nomex paper, cotton tape, glass sleeve, soldering rod, Grease etc complete for 320 to 500 KVA size complete all as specified and directed.

Repairing of armature shaft both side by depositing metal on it, grinding & polishing to make appropriate size of the shaft for 320 to 500 KVA size complete all as specified and directed.

Supply and replacing Ball bearing at DE (Driven End) side of No.6310 /6311/6312/6314 Make:- NBC/SKF-01 No for 320 to 500 KVA size.

Supply and replacing rectifier Diod for 320 to 500 KVA size complete all as specified and directed.

Supply and replacing AVR (Automatic Voltage Regulaotr) for 320 to 500 KVA size complete all as specified and directed.

Supply and replacing connetion plate of suitable size complete all as specified and directed.

M&L for repair/overhauling of existing starter panel board of any size/type including cleaning with compressed air tightening of all electric connections to switces including repair/replacment of existing MCB/ switch fuse disconnector units each of any rating including testing complete with fixing of door (front & backside) with proper fixing & locking arrangement replacement of wornout lugs, nut, bolts, internal wiring with suitable size (minimum 1.5 sqmm) of PVC copper conductor wire and llugs, proper connention to main earth lead, to be provided/replaced as required at cable entries, fixing of door front & back with copper locking arrangement as requred as site and painting with spary machine with super eanameled paint light grey paint in outer/ inner side of pannel after cleaning and prepaing surface including sign writing complete all as spcified and directed Note :- Spares part to be repalaced shall be measured and paid sparately as supply only

Supply only contractor TF 34 make siemns or equivalent approved.

Supply only Conactor TF 30 Make Siemens or equivalents approved.

Supply only Conactor TF 31 Make Siemens or equivalents approved.

Supply only PVC Connector.

Supply only Over Load Relay capacity 20-30 amp Make Siemens or equivalents approved.

Supply only Over Load Relay capacity 10-20 Make Siemens or equivalents approved

Supply only MCB TPN 63 amps 'C' series 415 Volt breaking capcity 10 KA.

Supply only MCB TPN 32 amps 'C' series 415 Volt breaking capcity 10 KA

S&F in replacement of Exhaust silencer complete with muffler of 100 KVA/62.5 KVA DG set complete connects engine and DG silencer to drive away hot gases generated during operation of DG to atmosphere through silencer complete all as specified and directed.

Dismantling and taking out the self starter,12 Volt DC fitted in 15 to 62.5 KVA 3 phase 50 HZ of DG sets and strip opening of Self starter 12 Volt DC for carrying out repair/ servicing /overhauling mechanically ,cleaning, oiling/greasing/varnishing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, complete and re-assembling of Self starter 12 Volt DC after repair/ servicing /overhauling and fixing the same in position and testing complete all as specified and directed . Note :- (i) Repairs/servicing / reassembling and testing of Self starter 12 Volt DC shall be carried out through a authorised service center. (ii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, shim, small springs, screws/gaskets/ packing /studs etc. (iii) The quoted rates of contractor are deemed to be included cost of transportation to and fro authorized service centre.

Supply only the following items/spare parts suitable for self starter, 12 Volt DC fitted in 15 KVA to 62.5 KVA 3 phase 50 HZ of DG set , dismantled/fixed under Sch `A` item No 75 here in above complete all as specified and directed. Note :- (i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 75 here in above. (ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.

Solenoid switch suitable for self starter, 12 Volt DC.

Commutator suitable for self starter, 12 Volt DC.

Carbon brush suitable for self starter, 12 Volt DC.

Field coils suitable for self starter, 12 Volt DC.

Bendix pinion assembly suitable for self starter, 12 Volt DC.

Bushe suitable for self starter, 12 Volt DC.

M&L for replacement of unserveceable interconnection wiring and its interlocking system in AMF electric control panel for DG set with using and including PVC insulated and unsheathed stranded copper conductor cable, single core, minimum 1.5 Sqmm size or as required 1100 Volts grade cable for making functional controls of the DG set, auxiliary contactor, push buttons, indicator, amps meter, volt meter complete as required at site for functioning of DG set in auto and manual mode, checking AC/DC circuits and removing & replacement of defective / unserviceable parts with new parts, complete all as specified and directed . Note:- (i) The complete panel shall be checked and tested on full load after necessary repairs and replacement of unserviceable wiring. for its smooth functioning and proper interlocking including shutt down on high water tempreture and low Oil pressure. (ii) All control wires shall be properly bunched, tied, ferruled for proper identification and crimped with adequate size of copper lugs. the cost of same are deemed to include under these items. (iii) The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of Sch `A’ as `supply only ‘ but quoted rates are inclusive of replacement of small/minor parts such as nuts, bolts, washers, shim, small springs, screws/gaskets/ packing /studs etc.

Supply only the following items/spare parts suitable for AMF pannel of DG set , dismantled/fixed under Sch `A` item No 77 here in above complete all as specified and directed. Note :- (i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 77 here in above. (ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.

Electronic timer,on delay type, dual range, suitable of 220 Volts/ 24 Volts, 2NO+2NC, 50 Hz, AC supply/ DC supply , for 0-60 seconds.

Power contactor 3 pole with 2NO + 2NC auxiliary contacts, coil voltage 220 volts, AC 3 rating 100 Amps

Power contactor 3 pole with 2NO + 2NC auxiliary contacts, coil voltage 220 volts, AC 3 rating 200 Amps.

Power contactor 3 pole with 2NO + 2NC auxiliary contacts, coil voltage 220 volts, AC 3 rating 300/325Amps.

Power contactor 3 pole with 2NO + 2NC auxiliary contacts, coil voltage 220 volts, AC 3 rating 400 Amps.

Power contactor 3 pole with 2NO + 2NC auxiliary contacts, coil voltage 220 volts, AC 3 rating 600 Amps.

Auxilliary relay 8 pin, 24 Volts ,DC , 2 change over.

Auxilliary relay 8 pin, 220 Volts , AC , 2 change over

Bimetal under volt / over volt relay suitable for 3 phase, 3 wire with 2 NO+2NC auxiliary contacts

Engine starting relay with sequence timer & Master timer suitable for 12 / 24 Volts DC supply

Indicating lamps LED type with holder for 12 / 24 volts DC supply

Digital electronic volt meter 0-50 V range suitable for 12 / 24 volt DC supply panel flush pattern square type size 96mmX96mm

Digital electronic volt meter 0-500 V range suitable for 415 Volts panel flush pattern square type size 96mmX96mm

HRC fuse DIN type with base for AC circuit 415 volts having rating of 400 Amps

No volt coil 100 to 400 Amp complete for suitabel capacity of DG sets panels

M&L for Cleaning of MS fuel tank of DG sets of 100 to 320 ltr capacity by collecting the fuel in cleaned barrels and removing sludge deposited/accumulated inside the tank of and disposal of sludge at a distance not exceeding 100 metre and cleaning the tank with kerosene oil , replacement of fuel tank strainer and unserviceable fuel gauge with new PVC fuel level indicator fixed with clips to the tank and marking levels for every 10 litre by marking and numbering on the side of fuel tank with synthetic enameled paint and refilling the collected fuel after filtration complete all as specified and directed.

M&L for Cleaning of MS fuel tank of DG sets of 350 to 800 ltr capacity by collecting the fuel in cleaned barrels and removing sludge deposited/accumulated inside the tank of and disposal of sludge at a distance not exceeding 100 metre and cleaning the tank with kerosene oil , replacement of fuel tank strainer and unserviceable fuel gauge with new PVC fuel level indicator fixed with clips to the tank and marking levels for every 10 litre by marking and numbering on the side of fuel tank with synthetic enameled paint and refilling the collected fuel after filtration complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead strip 36mm x 6 mm (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 40mm bore for protection of GI strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing & taking down of old/ ineffective earthing complete all as specified and directed. Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.

Excavation in trenches/pits in any type of soil(soft/loose/hard/dense) not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out complete all as specified and directed.

Returning, filling, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supply and laying Sub class 'B' bricks(old size) laid flat with length of brick perpendicular to length of cable in trenches as cable covers complete all as specified & directed.

M&L for clean and dry sand (unwashed) in trenches around the cable for cushioning complete all as specified & directed. Note :- Sand cushioning 8cm before laying the cable and 15cm after laying the cable & punned down 18cm,and punned thickness shall be measured and paid.

Supply,laying,testing and commissioning in pipes/ducts/poles/trenches/under floor/under road XLPE insulated cable screened PVC heavy duty with aluminium conductor,1100 Volt grade(earthed) of cross section area 95 Sqmm,3.5core complete all as specified & directed.

Supply,laying,testing and commissioning in pipes/ducts/poles/trenches/under floor/under road XLPE insulated cable screened PVC heavy duty with aluminium conductor,1100 Volt grade(earthed) of cross section area 120 Sqmm,3.5core complete all as specified & directed.

Supply,laying,testing and commissioning in pipes/ducts/poles/trenches/under floor/under road XLPE insulated cable screened PVC heavy duty with aluminium conductor,1100 Volt grade(earthed) of cross section area 240 Sqmm,3.5 core complete all as specified & directed.

Supply and laying 80mm bore GI pipe 'light grade' in trenches,under floors,roads,along poles for protection of cables,including sealing ends complete all as specified & directed.(MS Clamps to be measured and p[aid under appropriate item)

Supply and laying 50mm bore GI pipe 'light grade' in trenches,under floors,roads,along poles for protection of cables,including sealing ends complete all as specified & directed.(MS Clamps to be measured and p[aid under appropriate item)

CRANE & COMPRESSOR

S&F in replacement of DOL starter three phase,415 volt suitable for upto 5HP motor of crane complete all as specified and directed

S&F ( in replacement ) of flame proof suspension type pendent / hanging controlling unit with flame proof star/ stop push buttons with indicator lamp and emergency control remote , lifting hock for UP and DOWN , long travel motion ,cross travel and connoting to controlling micro speed panel suitable for safe and smooth operating system of EOT crane of 2 Tons capacity including making cable connection and testing complete all as specified and directed in presence of Engre-in-charge make BCH or equivalent model and make

S&F ( in replacement ) of flame proof suspension type pendent / hanging controlling unit with flame proof star/ stop push buttons with indicator lamp and emergency control remote , lifting hock for UP and DOWN , long travel motion ,cross travel and connoting to controlling micro speed panel suitable for safe and smooth operating system of EOT crane of 10 Tons to 20 tons capacity including making cable connection and testing complete all as specified and directed in presence of Engre-in-charge make BCH or equivalent model and make

S&F MCCB fixed thermal and fixed magnetic setting type of capacity 400 amps , 4 pole of breaking capacity icu 36kA,415 volts AC 50Hz as per including fitted with suitable size of aluminium lugs complete and taking down of existing MCCBs all as specified and directed

S&F MCCB fixed thermal and fixed magnetic setting type of capacity 315 amps , 4 pole of breaking capacity icu 36kA,415 volts AC 50Hz as per including fitted with suitable size of aluminium lugs complete and taking down of existing MCCBs all as specified and directed

S&F main switch DP switch HRC type of capacity 400 amps , 4 pole in metal 415 volts AC 50Hz as per including fitted with suitable size of aluminium lugs complete and taking down of existing Main switch all as specified and directed.

S&F in replacement of unserviceable main gear box oil seal packing ,gear box ball bearing etc or other defected connecting parts as required at site sample /type and making it oil lask proof and sound less proof complete and including testing on load of 2 ton EOT crane complete all as specified and directed .

S&F in replacement of unserviceable main gear box oil seal packing ,gear box ball bearing etc or other defected connecting parts as required at site sample /type and making it oil lask proof and sound less proof complete and including testing on load of 10 ton to 20 tons EOT crane complete all as specified and directed .

M&L for servicing of over head crane complete including cheking / tighting of nuts , bolts and brakes complete system ,adjusting of breaks motions and VFD adjustment setting as per load testing run of flame proof / non flame proof / normal type EOT/ HOT cranes with having single or double girder type and providing greasing & oiling of travelling / moving parts of cranes with connecting motor girder parts for movement of cranes hoist / long /cross travelling and including maintained the controlling of speed /creeping micro speed of motors with minor maint/repair the electrically operated main control panel wire with connecting control wiring system consisting of main switch ,step down transformer, contractor ,HRC fuse , VFD, PLR ,control pendent , wire rope with break drum unit , gear box unit ,oil levels , motor bed / foot, electrical control cable , motor terminal, end cable carriage trolly , motor shaft , bush flange bearing with lathe work , chain pully block , racket cluch ,gear block , chain wheel ,chain etc and including locating the defected fault and rectification of the fault and rectification of oil leakage etc any type and size and replacement of defected nut, bolts& washer andmaking it sound less proof and after trails testing run complete all as specified in present of Engr-in- charge Note:- (i) servicing , adjusting etc of breaks motions and testing run work will be carried out by well qualitied technician having good experience in the about reparing field of EOT cranes (ii) It is personally responsibly / liability of contractor for smooth function of cranes during contract period & defect liability period after the handing /taking over the all site without any extra cost to department (iii) contractor shall be immediately depute suitable nos of trademan to attend the complaints on required basis for found unserviceable of crane with in the effected time after launching of complaints or all as specified and directed by Engre-in-charge

EOT crane of capacity 20 tons.

EOT crane of capacity 2 tons.

EOT crane of capacity 5 tons.

EOT crane of capacity 10 tons.

S&F Limit switch for crane from 10 tons to 20 ton complete all as specified and directed.

S&F Crane operating Push button Remote 2 tons to 20 tons complete all as specified and directed.

S&F in replacement of magnetic brake 0.5HP 415V alongwith connecting fixing accessories as per existing sample / model suitable for break system of 2 Tons EOT cranes complete specified and directed by Engre-in-charge

S&F in replacement of hydraulic brake 1HP 415V alongwith connecting fixing accessories as per existing sample / model suitable for break system of 10 Tons to 20 tons EOT cranes complete specified and directed by Engre-in-charge

M&L for taking down of unserviceable motor motor from Over Head Cranes and including transporting and rewinding electric motor of capacity upto 2 HP ,3 phase 415 volts ,with supper enameled copper conductor wire as per existing sixe/gauge including making vanishing drying and connecting fixing accessories etc including refixing on same position and testing on load complete all as specified and directed in presence of Engre-in-charge

M&&L for taking down of unserviceable motor motor from Over Head Cranes and including transporting and rewinding electric motor of capacity upto 5 HP ,3 phase 415 volts ,with supper enameled copper conductor wire as per existing sixe/gauge including making vanishing drying and connecting fixing accessories etc including refixing on same position and testing on load complete all as specified and directed in presence of Engre-in-charge

M&L for Rail repair of cranes 10 to 20 tons making smooth for functional , cleaning dust, welding works complete all as specified and directed in presence of Engre-in-charge

S&F in replacement of FRLS PVC insulated electric cable with multi standed copper conductor cable with having of single 16 core of 2.5 sqmm ,1100 volts grade and making cable connection complete all as specified and directed

S&F in replacement of FRLS PVC insulated electric cable with multi standed copper conductor cable with having of single 4 core of 6 sqmm ,1100 volts grade and making cable connection complete all as specified and directed.

S&F in replacement of FRLS PVC insulated electric cable with multi standed copper conductor wire with having of single 2 core of 2.5 sqmm ,1100 volts grade and making cable connection complete all as specified and directed.

Supply of spare parts required for maintenance of EOT Crane of various capacities:-

Power contractor MNX -110 for EOT Crane .

Power contractor MNX 95 for EOT Crane .

Power contractor MNX 32 for EOT Crane .

Power contractor MNX 22 for EOT Crane .

Power contractor MNX 18 for EOT Crane .

Over relay 415 Volts.

Athekatic bearing VC 210 for HOT Crane .

Athekatic bearing VC 205 for HOT Crane .

Electric Hose 10/20 Ton Capacity 415 Volts.

AC drive ( inventer ) 10/20 HP 415 Volts.

PT coil 415 Volt.

M&L for Checking & repairing of 30 Kg/cms air compressor, by oiling, greasing and servicing including painting with one coat of synthetic ennamalled paint complete all as specified and directed.

M&L for rewinding of 3 HP motor 3 phase, 415 volt incl painting with one coat of synthetic ennamalled paint complete all as specified and directed.

Checking & repairing of 30 Kg/cms TO 500 KG/CMS air compressor, by oiling, greasing and servicing including painting with one coat of synthetic ennamalled paint complete all as specified and directed.

M&L for rewinding of 12.5h HP motor 3 phase, 415 volt incl painting with one coat of synthetic ennamalled paint complete all as specified and directed.

S&F fan belt for air compressor of 30 Kg/cms to 500 kg/cms complete all as specified and directed.

S&F bearing (DE/NDE) for air compressor of 30 Kg/cms to 500 kg/cms complete all as specified and directed.

Ambrish Builders (BID ID -3447300)

MTR GROUP & COMPANY (BID ID -3457086)