Construction of Room for HT LT Panel including Fencing of Transformer of ESS IV at NIT Meghalaya Permanent Campus, Saitsohpen,Sohra

Amount

Earthwork in excavation by manual means up to a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal Of surplus earth with all lead and lifts as directed and specified for the following classification of soils. All kinds of soil (ordinary soil/ hard soil/ dense soil)

Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for R.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for all heights complcte and as directed by Engineer in charge. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel)

Lintels, beams, plinth beams, girders, bressumers and cantilevers (using steel).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost Of centerjng, shuttering, finishing and reinforcement- All work up to plinth level: M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, slabs, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to first flcor level, excluding the cost of centerlng, shuttering, finishing and reinforcement M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. Stone soling 100 mm

Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately 1 :3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size

Half brick masonry with common burnt clay (non modular) lst class bricks in superstructure above plinth level up to first floor level Cement mortar 1 :4 (1 cement: 4 coarse sand)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections ………………. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, and panelling to be paid for separately For fixed portion Powder coated aluminium (minimum thickness Of powder coating 50 micron)

For shutters, doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing Of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separatelyPowder coated aluminium (minimum thickness Of powder coating 50 micron

Providing and fixing 12 mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to ls:12823 Grade-I Type-ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door. window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge: With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm

Providing and fixing lsl marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per ls:1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x63x4 mm

Providing and fixing aluminium sliding door bolts, lsl marked anodised (anodic coating not less than grade AC 10 as per ls:1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with lsI, ls:3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium handles, lsl marked, anodised (anodic coating not less than grade AC 10 as per ls:1868) transparent or dyed to required coloilr or shade, with necessary screws etc. complete:

Providing and fixing aluminium tower bolts, Isl marked, anodised (anodic coating not less than grade AC 10 as per ls:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3xl00 mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65 mm and not less than 15 mm wide) bolting device, steel handles, pegs, stays of 300 mm long etc. complete including providing 12xl2 mm square bars duly welded to steel frame at not more than 12 cm c/c applying a priming coat of red-lead paint etc. complete as per drawing Openable

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0mm thick glass panes

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes up to 10 mm dia. etc. complete

Providing and fixing G.I. chain link fabric fencing Of required width in mesh size 50x50 mm includjng strengthening with 2 mm dia. wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge Madeof G.I. wire ofdia. 4 mm

20 mm cement plaster of mix: 1 :4 (1 cement: 4 fine sand)

Cement mortar 1 :4 (1 cement: 4 fine sand).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Wall painting with acrylic emulsion pain of approved brand and manufacture to give an even shade

Peter O Lyndem (BID ID -3310784)

terence remdor syiem (BID ID -3311307)

Nabashem Warjri (BID ID -3311309)

Shri Collinstar Sawkmie (BID ID -3311302)