Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.9 LAccepted-AOC | ₹46.9 L Quoted ₹47.0 L | L1 | Accepted-AOC Found lowest and reasonable and accepted |
| 2 | L2₹55.8 LRejected-Finance 0 DEURAWA NICHLAUL MAHARAKANJ MAHARAJGANJ UTTAR PRADESH 273307 | 273307 | ₹55.8 L | L2 | Rejected-Finance In order but L2 |
| 3 | L3₹58.3 LRejected-Finance 29 108 A STREET NO 10 VISHWAS NAGAR DELHI 110032 | DELHI | SHAHDARA | DELHI | 110032 | ₹58.3 L | L3 | Rejected-Finance In order but L3 |
| Sl No | Description | Qty | Unit | Maa Vaishno Enterprises L2 | A N BUILDERS L3 | M/S ROORKEE ENGINEERING L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exc1.50 m in width and not exc1.50 m in depth for foundation, manholes cespits etc not exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed. | 51.02 | Cum | 200 ₹10,204 | 200 ₹10,204 | 200 ₹10,204 |
| 2.00 | Removal of surplus soil to a distance not exc 50 m and depositing where directed at a level not exc.1.5 m above the starting point complete all as specified & directed. | 36.64 | Cum | 150 ₹5,496 | 150 ₹5,496 | 50 ₹1,832 |
| 3.00 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm thick complete all as specified and directed | 14.38 | Cum | 150 ₹2,157 | 150 ₹2,157 | 90 ₹1,294.20 |
| 4.00 | Demolition of brick/stone masonry built in cement or cement lime mortar in any description complete all as specified and directed. | 9 | Cum | 250 ₹2,250 | 250 ₹2,250 | 200 ₹1,800 |
| 5.00 | Demolition of reinforced cement concrete in any description beam, roof, coloumn etc complete all as specified and directed. | 2.5 | Cum | 250 ₹625 | 250 ₹625 | 500 ₹1,250 |
| 6.00 | M&L for PCC 1:4:8 Type D-2 as in foundations and mass concrete all as specified and directed. | 4.5 | Cum | 4,000 ₹18,000 | 4,500 ₹20,250 | 3,000 ₹13,500 |
| 7.00 | S & F steel reinforcement of TMT bars of size 10mm dia and over, cut to length, bent to shape as required including cranking, hooking ends & binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed. | 4,050 | Kg | 105 ₹4.3 L | 105 ₹4.3 L | 95 ₹3.8 L |
| 8.00 | All as per item No 7 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. | 580 | Kg | 110 ₹63,800 | 110 ₹63,800 | 95 ₹55,100 |
| 9.00 | M & L for RCC M 25 (nominal mix) 1:11/2 :3 using 20mm graded crushed stone aggregate as in columns, pillars etc. complete all as specified and directed. | 9.75 | Cum | 6,000 ₹58,500 | 6,000 ₹58,500 | 5,600 ₹54,600 |
| 10.00 | M&L for RCC M25(Nominal mix) 1:11/2 :3 using 20mm graded crushed stone aggregate as in foundations, including rafts, footings , foundation beams, bases for columns etc basement slabs under reamed piles and mass concrete etc. complete all as specified and directed. | 5.8 | Cum | 6,000 ₹34,800 | 7,000 ₹40,600 | 5,600 ₹32,480 |
Updated dates
Tender Value
₹49.8 L
EMD Value
₹99,600
Closing Date
22 Dec 2025, 6:00 pmClosed
GE (U) Meerut Cantt
GE(U) Roorkee Road Meerut cantt
PROVN OF SECURITY ENTERY AND EXIT INCLUDING MAIN GATE, ROAD FURNITURE AND SECURITY NEAR NH-709A FOR 8 EW BN, PROVN OF ADDN/ ALTN TO OR MESS AND PROVN OF PROTECTIVE MONKEY NETS FOR 115 X WATER TANK AND INSTL OF IRON NET OVER THE GARBAGE PIT AT 8 EW BN
2025_MES_720916_3
8715/E8
Open Tender
Civil Works
180 days
Meerut cantt
Please refer tender documents
12 documents required · 12 mandatory
₹500
GE (U) Meerut Cantt
₹99,600
Yes
6 Feb 2026
3 Dec 2025
29 Dec 2025
3 Dec 2025
22 Dec 2025
10 Dec 2025
Amount
Excavation in trenches not exc1.50 m in width and not exc1.50 m in depth for foundation, manholes cespits etc not exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed.
Removal of surplus soil to a distance not exc 50 m and depositing where directed at a level not exc.1.5 m above the starting point complete all as specified & directed.
Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm thick complete all as specified and directed
Demolition of brick/stone masonry built in cement or cement lime mortar in any description complete all as specified and directed.
Demolition of reinforced cement concrete in any description beam, roof, coloumn etc complete all as specified and directed.
M&L for PCC 1:4:8 Type D-2 as in foundations and mass concrete all as specified and directed.
S & F steel reinforcement of TMT bars of size 10mm dia and over, cut to length, bent to shape as required including cranking, hooking ends & binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.
All as per item No 7 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M & L for RCC M 25 (nominal mix) 1:11/2 :3 using 20mm graded crushed stone aggregate as in columns, pillars etc. complete all as specified and directed.
M&L for RCC M25(Nominal mix) 1:11/2 :3 using 20mm graded crushed stone aggregate as in foundations, including rafts, footings , foundation beams, bases for columns etc basement slabs under reamed piles and mass concrete etc. complete all as specified and directed.
M&L for formwork to sides of flat surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical and directed.
M & L of formworks to sides of pillars, posts, struts, columns and stanchion, square, rectangular in rough finfished surface of concrete, complete all as specified and directed.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed
Rolling and consolidating formation surfaces (in cutting) with 8 to 12 tonne power roller complete to required level, gradient, slopes, camber and super elevation including filling depressions with and incl approved earth which may occur during rolling process complete all as specified and directed.
M&L for soling (or sub base) in 150mm consolidated thickness with broken stone boulders or quarried stone, 80 to 40mm size interstices filled, surface formed and rolled to required level, chamber, gradient and super elevation and consolidating with 8 to 12 tonne power roller complete all as specified and directed.
M&L for 150mm thick (compacted thickness) WBM in two layers (each layer of 75mm thick), with broken stone corse aggregate ( lime stone/ sand stone/ flint/ quartzite) of grading 2 (63 to 40mm size for 1st layer) and (50 to 20mm size for 2nd layer) grading 3, spread, rolled and consolidated to require gradient, camber, level and super elevation with 8 to 12 tonne power roller complete all as specified and directed.
M&L for preparing unsurfaced water bound macadam top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all specified and directed.
M&L for applying evently a priming of paving bitumen @ of 10Kg /10Sqm using paving bitumen of VG-10 etc complete all as specified and directed.
M&L for Applying evenly a priming/tack coat with paving bitumen VG 30 (60/70 grade) @ 5 Kg per 10Sqm of road surface and laying premixed bituminous macadam using binder (Bitumen VG-30/60/70 grade) contents @ 4 % by weight of total mix, mixed in Hot mix Plant and laid by using self propelled mechanical paver, rolled and compacted to required camber & gradient using 8 to 10 tonne power roller/tandem vibrating roller to achieve uniform smooth surface etc, complete all as specified and directed
M&L for providing bituminous premix semi dense asphaltic concrete(SDAC), 40mm consolidate thickness with 5.5% binder (using paving bitumen any penetration) content by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and directed.
M&L for pre cast cement concrete 1:3:6, type C-1, in kerb stone set in cement mortar 1:6, including necessary earth work excavation, complete all as specified and directed
M & L for RCC M-25 (nominal mix) 1:11/2 :3 using 20mm graded aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.
M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge
M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, as roughed finished surface of concrete complete all as specified and as directed by the Engineer-in-Charge
M & L for 15mm thick black granite in work over & including 15mm thick screed bed in CM 1:4 machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.
M&L for Mild steel, plain, black sheet 1.25 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
S & F framed work as in doors or gate of approved pattern, oranamental and intricate design of angle or other section conforming to Fe 290 Gde E-165 with gusset plateds, rail braces etc drilled for fixing of steel sheeting or other covering of doors etc to be prepared for hanging or slidingwith and ilncluding either hooking and hinges or steel hangingdoor fitting (excluding sheeting or othefr covering running rails and guiders) and hanging also fastening and fixing complete all as specified and directed.
M&L for preparation of new steel surfaces over 10cm width or girth & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified & directed.
M&L for PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in coping including necessary formwork complete all as specified and directed
M&L for 10mm thick cement plaster on fair faces of bricks surfaces or concrete surfaces in CM 1:4 finished even and fair without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.
S & F Solar stud with 3 LEDs of red/yellow colour on each side (total 6 Nos) housed in a tough pressure die casted aluminum alloy of size 125x125mm with built in stem of suitable length with LEDs, solar-cells, battery & light sensor duly covered with tough unbreakable polycarbonate transparent sheet on top. Equiped with solar system workable for 2-3 days (night) after full charge of 8-10 hours, fixed on road surface by cutting hole and grouting with epoxy all as per manufacture's instruction, etc complete all as specified and directed. Make : Green lite Cat Part No : GPL-03-01 or equivalent of 3M/SINOR
M&L for preparation biruminous surfaces of road and marking 2.5 mm thick cenrtre lines, stop lines, dashes, arrows etc. and the like 15 cm wide on roads pavements with hot applied thermostatic road marking paint of approved colour confirming to BS 3262-1989 with special applicators machine all as per manufacturers instructions complete all as specified and directed
S&F road side convex mirror 24 inches incl stainless steel post with PCC 1:3:6 20mm aggregate in foundation size 0.6x0.6x.09m incl excavation complete all as specified and directed.
S&F in repair informatory sign board in required size and each sign board made of 4mm thick aliminium panel (ACP) one side face to fully covered with 3M scotchlite brand intensity prismatic grade retro-reflactive sheeting as per ASTM D 4956 Type IV in required colour. The retro reflactive sheet shall be processed on ACP by 3M equipment heat lamp vacum applicator and letter, signs and symbol shall be cut by computerisied plotter or digital printed on retro reflactive sheet with high quality eco solvent digital Roland and fabricated out of high intensity prismatic grade sheeting with text matter (as required) and border of same sheeting.Sign board shall be supplied along with supported circular hollow stainless steel section frame of size 20mm dia1.29mm thick along with proper clamping with same section of stainless steel and nut bolts/welding,outer side size of board 1.2mx0.6m hollow section frame pipe 60mm dia 1.29mm thick, board ht from ground level to top 2.50m and necessary excavation, PCC complete all as specified and directed.
M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cm 1:6 ,complete all as specified.
M&L for rendering 15 mm thick on fair faces of brick work or cocrete surfacesk in cm 1:4,complete all as specified.
S& F pressed steel frames size 125X60mm for doors with one or more rebates including necessary fixing lugs hings lock strike plats complete as specified
S&F solid PVC door frame of size 50mm X 47 MM made out of 5 mm plain colour PVC sheet reinforced with M.S square tube in opening as per specification in drawing.
S&F 35 mm thick glazed and skelton shutters open rebated and prepared to recevie gauze etc ( with out sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitered beads for secruing glass etc, sizes of members of shutters as specified in SSR Part I section 8 clause 8.24 ( a)
S&F factory made shutters 35 mm thick plain framed panelled shutter ( Two panel ) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercila veneering on both faces ,. The size of rail and stile as per IS : 1003 ( part 1) kiln seasoned and chemically pressure treated complete
S&F factory made solid panel PVC door shutter 30mm trick ( style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colourPVC sheets on top rail, lock rail & bottom rail, rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading , and jointed together with solvent cement as per specification in drawing
S&F 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy all as specified and directed.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed.
S&F aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed.
S&F 100 butt hings heavy weight cold rolled mild steel all as specified.
S&F 150 mm overall length of cover plate floor dooe stopper of aluminium alloy body and tougue with hard drawn steel spring all as specified.
S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of 1.40 mm and fixed with tinned track or galvanised wire staples all as specified.
S&F aluminium powder coated glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium powder coated snap beading, screws, aluminium (powder coated ) fittings such as handle clips (suitable size), locking device, and glazing in panels with 5.0mm thick coloured/tinted glass and gauged with 0.36mm dia, 1.40mm aperture SS wire mesh using Jindal Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified and shown in drg and as directed by Engineer-in-Charge. (In case of non-availability of any particular section, the higher section in terms of Kg/rm shall be provided without any extra cost to govt.
S&F aluminium fully glazed door with shutter and frame with one or more rebates made out of Powder coated aluminium sections, shutters fixed with floor spring hinge (ISI marked) including jointing cleats for fixing etc complete all as specified with panel of 6 mm thick tinted glass (tint of glass as approved by GE), clips, rubber packing, powder coated aluminium snap beading, screws and aluminium fittings all as shown as drg No. CEAA/TD/132 sheet 1/2 and 2.2 except fixed glazing (FG) all as specified and directed.
Supply only aluminium Powder coated grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm
S&F anonised aluminium snap grid size 605X605 mm frame work for false ceiling including 6 mm dia GI hanger up to 2.0 m hight all as specified
M&L for perforated particle board/ tiles for insulation and accoustic purpose 60X60 cm in size fixed with on frame work or with staple on snap grid as in ceiling flat or sloping all as specified and directed.
M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc.
M&L for vitrified ceramic glossy finish shade with double charged 10 mm thick (sqaure/rectangular) area of each tiles exc. 0.42 Sqm and n. exc 1.00 sqm ,(1200mm*600mm ) in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete.(Note:-Tile colour and pattern approved by Engr-in-charge)
All as per above item No 56 but on vertical surfaces over and including 10 mm thick backing coat in cm 1 : 4,complete all as specified.
M&L for non skid ceramic tiles any colour 7 to 8 mm thick ( square/rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including 15 thick screed bed in cm 1:6 complete.(As approved by Engr-in-Charge)
M&L for glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 300*600*7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and icluding plaster in CM 1:4 all as specified and directed.
M&L for Preparing new plastered or unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots Washing, rubbing down and stopping of distempered and painted surfaces over a coat of putty applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified.
S&F PVC wall lining con-sisting of 5 mm thick insulating PVC wall panelling sheet inclusive of solvent cement and fixing at site complate as specification and drawing .
M&L for preparaing the surfaces on new surfaces applying two coat of distemper oil emulsion over a coat of 2 mm thick putty,complete all as specified.
M&L for preparation wooden of surfaces of any description , not otherwise described over 10 cm width or girth two coat of synthetic enamel paint over one coat of pink primer complete
M&L for cement concrete 75 mm thick type C-2 1:3:6 ( 40 mm graged aggregate as in plinth protection ) all as specified and directed
Excavating in post holes (or similar holes) each n.exc. 0.5 cum, getting out in hard dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers, n.exc. 25cm, watering and removing surplus soil to a distance n.exc. 50m and making good surface
S&F rolled trusses ( framed ), trussed purlins, crane and fastening feavy bracket framing ( bem, tee,anglechannel or flat sections) including distance pieces cleates etc confirming to Fe 410-W(Gde E-250 Quality)
Complete removal of existing treatment on old treated surfaces applying two coat of distemper over a coat of putty all as specified and directed
Complete removal of existing treatment for Preparing old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots Washing, rubbing down and stopping of distempered and painted surfaces over a coat of putty applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified.
S&F pre painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of an colour having a tensile strength of 550 Mpa as in roof covering / clading to wall fixed with self tapping screws as specified(AZ 150)
S&F MS wind tie for roof including securing bolte etc complete all as specified.
M&L for machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.
M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @ 3 % by weight of cement on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
S&F 25mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
Dismantling of existing unserviceable RCC/PVC water tank and S&F 500 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top ) hoisted & fixed in position complete all as specified and directed.
Dismantling of existing unserviceable RCC/PVC water tank and S&F 1000 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top ) hoisted & fixed in position complete all as specified and directed.
M & L for rolled mild steel work frame work as in doors or gates ,angle or other section with gusset plates , rails, braces, hinges, etc complete drilled for fixing and confirming to Fe-290 or Fe-330 complete all as specified and directed. (Note: Frame will be make for PVC water tank 500/1000 Ltrs, cutting holes in frame and welded mesh as per tank nipple existance or where required)
M&L for welded steel wire fabric fixed to wood or steel members, weight not exceeding 4 Kg/sqm, complete all as specified & directed.
Disconnecting existing PVC water tanks of capacity exc 250& n.exc 500 litres capacity, setting aside (or lowering if required), cleaning and removing all scales, dirts etc from tanks and from m,ouths of circulating pipes, etc and hoisting if required, reconnecting and refixing in position complete all as specified and as directed.
S&F 20mm tank Nipple suitable for HDPE water tank. (Minimum weight 20mm-45gms) complete all as specified and directed
S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed
Supply and fix 20mm dia Gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed FRLSH copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper FRLSH stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.
(a) One light /Tube/ fan point controlled by one, one way switch 05/06 Amps
(b) One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch
(c) One 3 Pin, 05 /06 Amps socket outlet point on independent board controlled by one, one way 5/06 Amps switch
All as per serial item No 90 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed
Supply & fixing switch piano flush type, 05/06 Amps single pole , one way 240 volts complete all as specified & directed
Supply & fixing switch piano flush type, 15 /16 Amps single ploe, one way 240 volts complete all as specified & directed .
Supply & fixing socket outlet 3 pin, 05/06 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.
Supply & fixing of socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.
Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.
Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed
S&F 20 watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative Aluminium extrusion cover ensures soft and glare free lightening T5 LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, easy to install, Efficacy:100 lumen/watt, Minimum 3.5 KV Voltage Serge Protection, Power factor > 0.9, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.
Supply and fix exhaust fans AC single phase 230/240 V of size 250 mm sweep inbuilt louvres complete including connecting up with 3 core cord flexible from ceiling rose to exhaust fan etc. all as speified and directed by Engr-in-charge.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SP 6 To 32 AMP
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.(i) SPN 40 To 63 AMP
S & F MCB DB single door SPN 8 Way with 200 Amps rated copper bus bar complete all as specified and directed.
M & L for sub main wiring with 4.0 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, FRLSH copper conductor stranded cable with and including continuous earth wire of size 4.0 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed .
Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified.
S & F Recess mounted economical LED panel light 2`X2` 36/40 watt Deep drawn CRCA sheet steel housing duly power coated in slim housing with high quality opal diffuser for uniform light with IP20, 100lm/w housing of pressed aluminium sheeet with complete all as specified and directed.
S&F wall mounting fan 400 mm sweep steel type with cord for speed adjustment including making connections with suitable size of copper wire and making good surfaces complete all as specified.
Supply and fix LED post top Lantern with die cast aluminium spigot gate light 45 Watt with spun power coated to cover,PDC heat sink,opal Pc diffuser and clear acrylic Clear milky diffuser for uniform bright light, efficacy 80lm/watt, with IP65 degree of protection & impact resistance complete all as specified and directed.
M&L for earthing to switch gear/MCB DB with mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised iron earth lead 4.0 mm dia by means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 15 mm bore GI pipe medium grade for watering and 20 mm dia GI pipe light grade for protection of earth lead up to 3 mtr with funnel, wire mesh etc with and including testing complete all as specified and as shown in electrical plate No 3 of MES sch Part I.
M & L for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, FRLSH copper conductor stranded cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed .
Supply and fix electric water heater,storage type steel body with SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece completed all as specified and directed.
Supply and fix exhaust fans steel body AC single phase 230/240 V of size 450 mm sweep inbuilt louvres complete including connecting up with 3 core cord flexible from ceiling rose to exhaust fan etc. all as speified and directed by Engr-in-charge.
Supply, laying and testing of XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade, cross sectional area 25 sqmm 4 core complete all as specified and directed.(Notes:- Excavation earth work sand cushioning bricks shall be measured and paid separately)
M&L for Sand cushioning for underground cables 8 cm before laying the cable and 15 cm after laying and streatching the cable, complete all as specified . (Note: Punned thickness shall be measured).
Material and labour for brick protection with sub class B bricks using old size bricks , laid dry, flat over cable , longer length of brick laid perpandicular to the cable in trenches all as directed.
Maa Vaishno Enterprises (BID ID -3496570)
A N BUILDERS (BID ID -3497576)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.35 MB
Tender8715.pdf
Tender Documents • 1.43 MB
PS8715.pdf
Additional Documents • 0.89 MB
CreditSchedule8715.pdf
Additional Documents • 0.16 MB
AllMakes8715.pdf
Additional Documents • 0.65 MB
BOQ_831632.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid