GE (N) P/T- 67 OF 23-24 REPAIRS TO SEWAGE LINE, CLEANING OF MANHOLES SEPTIC TANK SOAKAGE WELL IN THE AREA OF NIRMAN VIHAR CHITRAGUPTA COLONY, TEST AUDIT COLONY QG CLIMO COMMD CANTEEN MAITRI COMPLEX AND CERTAIN AREA OF AGE B/R (C) UNDER GE (N) PUNE

Amount

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in hard/ dense soil complete all as specified and as directed.

Material and labour for Cement concrete (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping, benching, bed blocks, lintels upto 1.5m clear span and the like including including weathering, slightly rounded or chamfered angles and throating, using necessary form work including demolition of existing concrete all as specified and as directed.

Material and labour in repair for 150mm bore RCC pipes, class NP-2 laid and jointed with collars and tested including demolition and breaking up 150mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Material and labour in repair for 200mm bore RCC pipes, class NP-2 laid and jointed with collars and tested including demolition and breaking up 200mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Material and labour in repair for 300mm bore RCC pipes, class NP-2 laid and jointed with collars and tested including demolition and breaking up 300mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance exceeding 1.5Km and not exc. 5Km and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B1 (using 20mm graded broken stone aggregates) as in surface channel and drain including demolition of existing concrete complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipe including demolition of existing PCC complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore of pipe including demolition of existing PCC complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300 mm bore of pipe including demolition of existing PCC complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 200 mm internal dia of pipe complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 300 mm internal dia of pipe complete all as specified and as directed.

Supply and fix factory made 50 mm thick, 900mmX650mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement as per manufacturer's design and set in CM 1:4 and handles including demolition of existing RCC cover (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix for factory made 50 mm thick, 600mmX450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement as per manufacturer's design and set in CM 1:4 and handles including demolition of existing RCC cover (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix for factory made 50 mm thick, 450mmX450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement as per manufacturer's design and set in CM 1:4 and handles including demolition of existing RCC cover (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Supply and fix for factory made 50 mm thick, 600mmX600mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare includingreinforcement as per manufacturer's design and set in CM 1:4 and handles including demolition of existing RCC cover (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

M&L in repair for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) as in landings, cover slab (for manholes), shelves & similar articles with plan faces & set in CM 1:4 complete all as specified and directed.

M&L for mild steel TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

Taking out semi solid, liquid suspension sludge and foreign material from man hole/ septic tanks/ soakage well of any description and any depth including sucking/ pumping of water with pump set and removing and refixing of acessories and appliances required for safe disposal of sludge and foreign materials either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) in ground complete all as directed. (Note: The location at out side MOD land for disposal of foreign material obtained above shall be located by the contractor himself).

Taking out semi solid, liquid suspension sludge and foreign material from man hole depth exc. 0.6 m but n. exc. 0.9 m manually or macanically and removing and refixing of acessories and appliances required for safe disposal of sludge and foreign materials either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) in ground complete all as directed. (Note: The location at out side MOD land for disposal of foreign material obtained above shall be located by the contractor himself).

Taking out semi solid, liquid suspension sludge and foreign material from man hole depth exc. 0.9 m not exc. 1.20 m manually or macanically and removing and refixing of acessories and appliances required for safe disposal of sludge and foreign materials either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) in ground complete all as directed. (Note: The location at out side MOD land for disposal of foreign material obtained above shall be located by the contractor himself).

Taking out semi solid, liquid suspension sludge and foreign material from man hole depth exc. 1.20 m not exc. 1.80 m manually or macanically and removing and refixing of acessories and appliances required for safe disposal of sludge and foreign materials either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) in ground complete all as directed. (Note: The location at out side MOD land for disposal of foreign material obtained above shall be located by the contractor himself).

Cleaning/clearing & Maintanance of sewage lines including CI/PVC/SGSW/RCC stacks, incl under ground sewage lines any depth by removing any type of blockage from sewage drain upto and including 100mm bore/ dia by rodding or any other means from manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning including intermediate manholes. Sludge/sludge water in form of semi solid/loose state will be disposed off either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) including taking off manhole covers and refixing the same after cleaning. The operation shall be executed/carried out with any kind of sewage cleaning device such as sewage cleaning Mechanical Pump / Vehical and cost of same shall be deemed to be included in the rate quoted by the contractor.

Cleaning/clearing & Maintanance of sewage lines including CI/PVC/SGSW/RCC stacks, incl under ground sewage lines any depth by removing any type of blockage from sewage drain exceeding 150mm and not exceeding 200mm bore/ dia by rodding or any other means from manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning including intermediate manholes. Sludge/sludge water in form of semi solid/loose state will be disposed off either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) including taking off manhole covers and refixing the same after cleaning. The operation shall be executed/carried out with any kind of sewage cleaning device such as sewage cleaning Mechanical Pump / Vehical and cost of same shall be deemed to be included in the rate quoted by the contractor.

Cleaning/clearing & Maintanance of sewage lines including CI/PVC/SGSW/RCC stacks, incl under ground sewage lines any depth by removing any type of blockage from sewage drain exceeding 200mm and not exceeding 300mm bore/ dia by rodding or any other means from manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning including intermediate manholes. Sludge/sludge water in form of semi solid/loose state will be disposed off either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) including taking off manhole covers and refixing the same after cleaning. The operation shall be executed/carried out with any kind of sewage cleaning device such as sewage cleaning Mechanical Pump / Vehical and cost of same shall be deemed to be included in the rate quoted by the contractor.

Cleaning of blocked WC/gully trap/ Floor trap, upto and including first manhole by manual labour as well flushing with clean water making the WC seat , gully trap, floor trap operational complete all as specified and directed by Enge-in-Charge

Supply and fix in repair PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

Supply and fix in repair PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Supply and fix in repair grating doom 100mm dia of PTMT complete all as specified and as drected. Make: Prayag Cat No. 111 or of equivalent make as per Appx 'A' as approved by GE

Supply and fix in repair grating doom with waste hole 125mm dia of PTMT complete all as specified and as drected. Make: Prayag Cat No. 113 or of equivalent make as per Appx 'A' as approved by GE

Supply and fix in repair PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed.

Supply and fix in repair PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and as directed.

Supply and fix in repair cast iron nahani/floor trap, 75mm dia of outlet, with grating including joining to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

Material and labour in repair PVC (SWR) gully trap 125/ 110 setting and jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 mm x 440 mm, white, with CI 'P' of 'S' trap, front or back inlet and foot rests any pattern, including making good to floor and concrete and all necessary fittings, connections to trap, inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed.

Supply and fix in repair vitreous china European type wash down water closet pan, (Pedestal pattern), white including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, 'P' or 'S' trap, necessary inlet and outlet connections including making good complete all as specified and as directed.

M & L Loose filling with aggregates of gauge 80 to 150 mm of broken bricks in soakage pits, soakage wells including taking out & removing old worthless / unusable material complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed.

Taking out old disturbed hardcore and material & labour for hardcore filling with broken stone or boulders of gauge not exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour 40mm thick PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) as in floor topping finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M & L Glass dividing strips, width of strip 38mm, 3 mm thick , inserted in position, conform to design complete all as per specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection/court yard finishing the surface even and smooth without using extra cement including demolition complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M&L for vitrified double charged coloured tiles 08 to 10 mm thick (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified.

Ditto above ser No 52 but on skirting over 10 mm th backing coat in CM 1:4 complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles of size 300mm x 300mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:4) as in floors complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 300mm x 200mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles of size 400mm x 400mm x 10mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:4) as in floors complete all as specified and as directed.

M&L for textured heavy duty exterior ceramic tiles of size 300mmx300mmx10mm thick as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 20mm thick in CM (1:6) complete all as directed.

Material and labour for brickwork with fly ash old size bricksbricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) including demolition of brick work/ precast concrete block walling, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks exc10 cm in width, type C-1,1:3:6 (using 20mm graded stone aggregate) and setting in cement mortar 1:6 including demolition of existing complete all as directed

Taking down cement plaster on brick/ block/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement mixing water proofing liquid @ 200ml per 50Kg cement, (water proofing liquid to be measured separately) all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as directed.

Supply and fix 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 20 mm bore GI tubing 'medium grade' galvanised, with all fittings laid in trenches complete all as specified and as directed.

Fixing only 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning for refixing complete all as specified and as directed.

Fixing only 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning for refixing complete all as specified and as directed.

Material and labour cutting chases in brick wall, not exc. 10cm girth, pinning in for concealed water tubing and making good to facings where required and pointing to cenment mortar (1:3) complete all as specified and as directed.

Supply and fix in repairs 15mm dia PVC connection 450mm long including PTMT nuts etc complete all as specified and as directed

Supply and fix in repairs plastic water cover closet seat any colour closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC complete all as specified and as directed. Make: Cera Cat No. 2308 Carina or of equivalent make as per Appx 'A' as approved by GE

Supply and fix in repairs waste coupling of PTMT (half or full threaded) bore/ dia of discharge pipe 31/32 mm (H/T) complete all as specified and as directed. Make: Prayag Cat No. 101 or of equivalent make as per Appx 'A' as approved by GE

Supply and fix in repairs waste coupling of PTMT (half or full threaded) bore/ dia of discharge pipe 38/40 mm (H/T) complete all as specified and as directed. Make: Prayag Cat No. 102 or of equivalent make as per Appx 'A' as approved by GE

Supply and fixing in repair PVC lid of any pattern for poly water storage tanks of capacity 500 /1000 litres including PVC hinges and PVC locking both complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs corrugated waste pipe high quality for wash basin, sink of size 50 x 800mm complete all as specified and as directed. Make Prayag cat No. 3451 or of equivalent make as per Appx 'A' as approved by GE

M&L for machine pressed precast cement concrete interlocking paver block, coloured glossy any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including dismantling existing tiling, cement mortar bedding (but not backing), rubbish off the premises complete all as specified and as directed.

M&L for designer coloured glossy chequered cement concrete tiles of size 30cmx30cmx25mm thick in floor, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM (1:6) including dismantling of existing tiles of any description or thickness laid bedded and pointed in cement mortar complete all as specified and as directed.

M&L for removing of plants, bushes, weeds with roots tree grown from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , behind CI pipe, waste water pipe, bends, shafts etc. by chiseling carefully without damaging the structure and making good and filling the disturbed area including toothing, bonding and plastering with cement mortar 1:3 or cement concrete (1:1.5:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings and applying chemical treatment with GLYPHOSATE 41% complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to height of 15 metres vertical slopes)

Supply and fix hume pipe septic in reapirs of 900 mm Dia and 2.5 m length including necessary demolition, excavation , earth work and removal of old septic tank (any size) and removal of debris,fixing of vent pipe , cowl & RCC covers & connecting the new septic tank to the incoming sewer lines and connected to soak pit as directed.

M&L for PCC type B-1, (1:2:4), using 20mm graded stone aggregate) including demolition / dismantling required as in sunken floor mixing water proofing liquid @ 200ml per 50Kg cement. (water proofing liquid to be measured separately) finished even and smooth.

M & L for polymer modified bituminous elastomaric water proof coating @ 0.60 Kg per Sqm in two layers for sunken portion of toilet Make: Dr Fixit, Pidilite

M&L for rendering 15 mm thick in cm 1:4 in sunken portion on Brick / stone masonery surfaces mixing water proofing liquid @ 200ml per 50Kg cement. ((water proofing liquid to be measured separately) including finished even and smooth.

Supply only liquid water proofing compound. Make: Dr Fixit, Pidilite.

S&F 40 mm dia PVC pipe (out from sunken portion) as in spout all as specified and directed.

Dismantling Galvanised. 2 strand, steel barbed wire with barbs of any description and in any position.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from any type of soil/ position and making good disturbed ground.

Excavating in post holes as in hard / dense soil (or similar holes) each n exc 0.5 cu. m, getting out in hard dense soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post.

S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 any size.

S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exc 25mm but n exc 50mm long dia of shank all as specified.

Supply only chain link MS galvanised fencing incl line wire any size and any type of strands, rails, straining bolts etc incle provn of binding wire all complete.

Fixing only in repair chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

M&L for round bars 10mm dia and over cut to length& fixed as in straining bars for stiffining chainlink fence all as specified and directed.

Dismantling of structural steel work of any description including doors, gates, framed trusses etc. complete all as specified and as directed.

M&L for mild steel framed work as in doors or gates of angles or other sections with braces etc., complete drilled for fixing of steel sheeting and prepared for hanging with and including hinges, fabricated hasp and staple for locking arrangement and hanging and fixing complete all as specified and as directed.

M&L two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth.

S& F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins including taking out old /wronout barbed wire from position, etc. as directed (each line wire to be measured)

S& F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line wire to be measured)

S & F Framed work such as grills with ornamental and intricate design, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of nwater tanks and similar work conforming to Fe. 290.Gde-E-165

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/s Akshay Contruction

VIRENDRA FABRICATORS

J P ASSOCIATES

A.S.ENTERPRISES

R k construction

K.K.Enterprises