M AND R to Roads phase I II III

Excavation for catch/side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. (Item No. 2.18)

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. (Item No. 2.26)

The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains etc. complete (Item No. 8.12)

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.(By/manaual Means) a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add 20% d) 4.50m to 6.0m lift, Add 30% (Item No. 12.02)

Providing soling using 80mm size trap metal in 15cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. (Item No. 21.40)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/granite/quartzite/gneiss metal for foundation and bedding/steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.), with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 24.04)

Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. (Item No. 14.01)

Providing cast in situ/ready mix M20 grade cement concrete for head walls of CD work/retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete.(with reversible drum type mixer/concrete batch mix plant(pan mixer) without SCADA (Item No. 11.29)

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. Complete

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area . (Item No. 2.07)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness. (Item No. 2.09)

Providing 50mm thick semi grout bituminous treatment including supplying all materials, prepairing the exisisting road surface, applying tack coat @ 0.735kg/sqm and laying the required thickness of metal layer, heating and spraying bitumen of specified Grade at the rate of 2.75kg/sqm, spreading chips and laying seal coat of specified Grade of bitumen of 1.25 Kg/sqm and compacting, making the surface good etc. complete(For only Patch Repair works/For Road work)(VG-30 bulk bitumen rates are considered to arrive at rates)

BITUMINOUS MACADAM: Proving and laying bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 80/100mm compacted thickness with 3.3 % using specified grade of Bitumen. -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, vibratory roller.(VG-30 bulk bitumen rates are considered to arrive at rates)

BITUMINOUS CONCRETE:-Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50mm compacted thickness with specified grade of Bitumen, Excluding prime/tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant without SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates)

Excavator(JCB JS 80)

Semi Skilled Labour

Collection of garbage from road side & kundies in MIDC area, conveyance by truck upto disposal point as directed including all leads & lifts, loading, unloading, spreading levelling, disposing etc. complete.

Testing & Royalty charges

BASIC TEST OF AGGREGATE: Flakiness Index & Elongation Index.

FINE AGGREGATE: Silt Factor.

CONCRETE: Compressive Strength OF C.C. Cube (Set of 3 cubes).

BASIC TEST OF CEMENT: Standard Consistancy,Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness

BASIC TEST OF AGGREGATE: Sieve Analysis.

STEEL BAR TESTING: Upto 16 mm (Set of 3 Bars)

BASIC TEST OF AGGREGATE: Water Absorption, Specific Gravity,Impact Value, Crushing Value.

CONCRETE: Concrete Mix Design (With all Tests on basic materials)

FINE AGGREGATE: Fineness Modulus ( Sieve Analysis ),Silt & Clay Content

FINE AGGREGATE: Chloride & Sulphate Content.