SPL REP TO TOILETS OF OFFRS AND LADIES OF BLDG NO P 314 AND SPL REPAIR TO WASHROOMS OF BLDG NO T162 RENOVATION OF TOILET CUM BATHROOM OF BLDG NO T49 T60 T61 AND T62 AND PROVN OF SENTRY POST AT RP GATE NO 2 OF 7 GARH RIF AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down chowkhats or frame n exc 1.5 sqm each with shutters (without taking off shutters from the frame) including fittings complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters (without taking off shutters from the frame) including fittings complete all as specified and directed.

Taking down toughened glass doors/ fixed glass or urinal partitions glass of any thickness, size and fixed in any positions complete all as specified and directed.

S&F of powder coated aluminium frame for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F of powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket as required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc; aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws complete all as specified and directed. Note: Fittings shall be measured and paid for separately under respective item.

S&F of solar control film, 25 micron, reflective type sticked to glass panes as per manufacturer instructions complete all as specified and directed.

S&F in repairs false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum with semi perforated) false ceiling tiles of 12 mm thick micro tegular fixed in frame size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS code. false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.50mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 3mm dia hanger wire upto 1200mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws complete all as specified and directed.

S&F of solid PVC door frame of size 50 x 47 mm, made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F of factory made factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Stainless steel butt hinges (03 Nos.) and screws shall be included in the quoted rate of item.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other fames/ chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: M.S. hold fast/ lugs or SS dash fasteners shall be included in the quoted rate of item.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: M.S. hold fast/ lugs or SS dash fasteners shall be included in the quoted rate of item.

M&L for providing cement concrete, 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping, bed blocks, lintels, cills, steps, seismic and other similer bands, kerbs and like etc complete all as specified and directed.

M&L for mild steel framed work such as in grills, gratings, railings, frame work of water tanks etc; with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F of 75 mm long mild steel butt hinges, medium weight, cold rolled and fixed to steel frame with welding complete all as specified and directed.

S&F of 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F of 150 mm long aluminium handles, cast type, anodised and fixed to shutters complete all as specified and directed.

S&F of 150 mm long aluminium anodised barrel tower bolts, extruded section and fixed complete all as specified and directed.

S&F of 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F of 100 mm long stainless steel butt hinges, ISI marked, cast type and fixed complete all as specified and directed.

S&F of 100 mm long stainless steel handles, ISI marked, cast type and fixed complete all as specified and directed.

S&F of 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F of 125 mm long extruded brass handles, fabricated type, polished and fixed complete all as specified and directed.

S&F of 250 mm long brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

Taking out carefully of existing Kota stone flooring of any size and thickness, laid, bedded in cement mortar including cleaning of old screed bed and slurry and making stone slab serviceable for refixing complete all as specified and directed.

Refixing old retrieved Kota stone at same location over and including M&L for providing 20 mm thick cement screed bedding in CM 1:6 including grinding and mirror polishing to achieve required finish complete all as specified and directed.

M&L for 18 to 20 mm thick granite stone slab (any type) (table rubbed and polished) as in steps, jambs, pillars, window & door cills, cooking platforms, counter, shelves and like in cement mortar (1:4) over and including 15 mm thick screed bed in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including making the edges bullnosed complete all as specified and directed.

M&L for 20-22 mm thick machine cut kota stone slab flooring of size 1200 x 600 mm (4' x 2') over and including 20 mm thick cement screed base in CM 1:6; laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for 50mm thick sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, platform bases etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:1½:3, type A-1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:1½:3, type A-1 (using 20mm graded stone aggregate) as in beams, bands, cantilevers, bressummers, lintels over 1.5 m span etc. complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surface flat rough finished surface complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, bands, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat rough finished surface complete all as specified and directed.

Demolition of cement concrete in ground floor (unreinforced) and paving n exc 15 cm thick (below or above GL) including tiling if any complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in sub base of floors to receive finish, finished even and rough complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like; finishing the surfaces even and smooth without using extra cement with and including making the grooves in bays n exc 2 m in length and cutting dummy joints 65 x 10 mm @ 3 m interval and at corners and filling the same with bitumen mastic 1:3 complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) joint free, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors; over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) joint free, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors; over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) joint free, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm over and including 10 mm thick rendering in CM 1:4 for backing of tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for premium double charge matte finish vitrified tiles 9-10 mm thick (area of each tiles n exc 2.20 sqm each) as in floors, fixed with 5 mm spacers set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM (1:6) and pointed with epoxy tile grout filling of approved make and colour including dismantling of old tiles fixed in any mortar and position complete all as specified and directed.

M&L for premium double charge glossy finish vitrified wall tiles 9-10 mm thick (area of each tiles n exc 2.20 sqm each) fixed on vertical surfaces; set and jointed in neat cement slurry over and including 10 mm thick cement plaster in CM (1:4) and pointed with epoxy tile grout filling of approved make and colour including dismantling of old tiles fixed in any mortar and position complete all as specified and directed.

M&L for coloured glazed ceramic tiles in walls/ vertical surface of size 350 x 250/ 450 x 300 & 7 mm thick over and including 10 mm thick rendering in CM 1:4 for backing of tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles with matching high lighter in walls/ vertical surface of size 600 x 300 & 7-8 mm thick over and including 10 mm thick rendering in CM 1:4 for backing of tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including dismantling of old tiles complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, including racking out joint, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on brick/concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces, finishing the surfaces even and smooth without using extra cement including mixing water proofing compound complete all as specified and directed. Note: WPC will be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of required shade and colour, applied as per manufacturer's specification complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for applying a coat of 2 mm thick white wall care cement based water proof putty in two layers on walls/ ceiling, finshed even and smooth complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over coat of white cement based putty (where required) complete all as specified and directed. Note: Wall Putty shall be measured and paid separetely.

M&L for preparation of old plastered surfaces of walls, soffits, facia, chajjas etc. and applying two coats of exterior weather proof water based emulsion paint (white/tinted) complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of exterior weather proof water based emulsion paint (white/tinted) over a coat of white cement based putty (where required) complete all as specified and directed. Note: Wall Putty shall be measured and paid separetely.

M&L for complete removal of old decorated surface of walls and applying two coat of exterior weather proof water based emulsion paint (white/tinted) over a coat of white cement based putty (where required) including preparation of wall surfaces complete all as specified and directed. Note: Wall Putty shall be measured and paid separetely.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means with and including applying two coats of oil emulsion distemper over coat of white cement based putty (where required) complete all as specified and directed. Note: Wall Putty shall be measured and paid separetely.

S&F of 4.8 mm thick sheet glass, ordinary quality and glazing with rubber gasket in square not exceeding 0.5 Sqm in each pane for aluminium window, door, ventilator complete all as specified and directed.

S&F of 4.8 mm thick sheet glass, ordinary quality and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane for aluminium window, door, ventilator complete all as specified and directed.

S&F of 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads beading complete all as specified and directed

S&F of 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed

S&F of 10 mm thick frosted toughened glass as in doors or other similar works in approved shape and design with necessary steel fittings and fixtures including 300 mm long one stainless steel handles fixed in both sides of door shutter, SS locks fixed with wall/ ceiling/ floors etc complete all as specified and directed. Make: Steel fittings and fixtures shall be of Ebco/Hettich Saint Gobain.

S&F of 10 mm thick frosted toughened glass, fixed type as in partition walls or other similar works in approved shape and design with necessary steel fittings and fixtures complete all as specified and directed. Make: Steel fittings and fixtures shall be of Ebco/Hettich Saint Gobain.

S&F of 12 mm thick toughened glass as in doors or other similar works in approved shape and design with necessary steel fittings and fixtures including 300 mm long one stainless steel handles fixed in both sides of door shutter, SS locks fixed with wall/ ceiling/ floors etc complete all as specified and directed. Make: Steel fittings and fixtures shall be of Ebco/Hettich Saint Gobain.

S&F of fancy type stainless steel body lock for glass doors of premium quality and of approved brand with two/three set of keys complete all as specified and directed. Make: Godrej or equivalent as approved by GE.

S&F of fancy type stainless steel 300mm long fancy H-type curve/ straight as required, handle set made out of 25mm dia stainless steel pipe and fixed to toughned glass doors complete all as specified and directed. Make: Godrej or equivalent as approved by GE.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F of 25 mm dia stainless steel drapery/ curtain rod, min 2 mm thickness with fancy type brackets/holders for hanging and fixing complete all as specified and directed.

S&F in repairs half stall vitreous china urinal, white colour of size 710 x 480 x 300 mm, Ist quality with sensotrinic sensor flushing valve with complete kit including CP waste coupling and PVC down waste pipe upto floor level complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm including cutting for and pinning in ends of brackets or erecting stand with and including 32 mm PTMT waste coupling and 32 mm PVC corrugated waste pipe complete all as specified and directed.

S&F in repairs vitreous china single piece WC with inbuilt cistern with UF soft close seat cover, hinges, dual flush cistern fittings and accessories set complete all as specified and directed. Make: Jaquar Cat No. LYS-WHT-38751S250UFSMZ / OPS-WHT-15753NS250UFSMZ or equivalent as approved by GE.

S&F in repairs vitreous china over counter (table top) wash hand basin, white, circular or triangular shape including PVC connection and CP waste coupling complete all as specified and as directed. Make: Jaquar Cat No. FSS-WHT-29901 / LYS-WHT-38901N or equivalent as approved by GE.

S&F in repairs 15 mm bore brass CP pillar taps with long extension body (suitable for counter top WHB), fancy type, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. Make: Jaquar OPP-15021PM / LYR-38021 or equivalent as approved by GE.

S&F in repairs 15 mm bore brass CP long body bib cock, fancy type with wall flange, screwed for iron pipe and fixed complete all as specified and directed. Make: Jaquar Cat No. COP-CHR-107PM or equivalent as approved by GE.

S&F in repair 15 mm bore brass CP angle stop cock, fancy type with long shank, concealed type, screwed for iron pipe and fixed complete all as specified and directed. Make: Jaquar cat No. CQT-CHR-23083K or equivalent as approved by GE.

S&F in repairs stainless steel toilet paper holder with flap complete all as specified and directed. Make: Jaquar Cat No. ACN-CHR-1153S or equivalent as approved by GE.

S&F in repairs 15 mm bore brass CP two way bib taps, fancy type, screwed for iron pipe and fixed complete all as specified and directed. Make: Jaquar Cat No. ARI-CHR-39041 or equivalent as approved by GE.

S&F in repairs brass CP single lever 3 - inlet diverter (complete set- concealed brass operating kit with button assembly, top cover, lever, shower knob etc) for mixing hot and cold water suitable for pipe of 15mm bore complete all as specified and directed. Make: Jaquar Cat No. KUP-CHR-25079NKPM, ALD-079N or equivalent as approved by GE.

S&F in repairs brass CP bath tub spout cock with wall flange suitable for pipe of 15mm bore complete all as specified and directed Make: Jaquar Cat No. SPJ-CHR-5429S or equivalent as approved by GE.

S&F in repairs ABS CP overhead shower rose 100mm dia with rubit cleaning system including 200mm long compatible pipe suitable for pipe of 15 mm bore complete all as specified and directed. Make: Jaquar cat No. OHS-CHR-1989 or equivalent as approved by GE.

S&F in repairs stainless steel tubular towel rail 450 mm long including a pair of bracket complete all as specified and directed. Make: Jaquar cat No. ACN-CHR-1111BSM or equivalent as approved by GE.

S&F of stainless steel towel rack 600 mm long with lower hangers and hooks complete all as specified and directed. Make: Jaquar cat No. ACN-SSF-1181S or equivalent as approved by GE.

S&F of brass CP swivel magnifying mirror of round shape and fixed on wall with SS screws complete all as specified and directed. Make: Jaquar Cat No. ACN-CHR-1195N or equivalent as approved by GE.

S&F in repairs 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F of PTMT liquid soap dispenser white color of standard size with necessary fixing screws complete all as specified and directed.

S&F in repairs stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in replacement vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with and including white plastic seat cover with aluminium hinging device complete all as specified and directed.

S&F in replacement vitreous china WC squatting pan "Orissa Pattern" of size 580 x 440mm white with integral foot rests with and including provn of cement concrete bedding and 'P' or 'S' trap as required including connection to trap and to flush pipe, anti syphonage pipe, etc. and making good to floor complete all as specified and directed.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity with 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers and fixed complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 1000 litres, hoisted including all fittings as required and 20 mm dia PTMT float valve (Min wt 20mm-210gms) and fixed in position complete all as specified and directed.

S&F in repairs vitreous china urinal, bowl type (back or corner wall type) with providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement (excluding flushing cistern) but with and including CP waste fitting, PVC waste pipe, CP urinal spreader and PVC connection 450 mm long for flushing complete all as specified and directed.

Supply and laying full body coverstone vitrified tiles as countertop or wall lining etc; of size 800 x 2600 mm and min thickness 15 mm with water absorption less than 0.06% conforming to IS:15622 of approved make, brand and manufacturer, laid on 20 mm thick screed bed in cement mortar 1:4 and jointing with grey cement slurry @ 3.30 kg/sqm including grouting the joints with white cement and matching pigments etc; the slab must be cut with zero chipping diamond cutter only and laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vaccum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily of approved colour and make complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F of sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F of 5 mm thick corner glass shelf (CP bracket) of size not less than 225 x 225mm with SS railing fixed with SS screws and PVC rawl plug complete all as specified and directed.

S&F of 100 mm dia stainless steel grating doom with or without hole complete all as specified and directed.

S&F of PVC connection 15mm size with PTMT nuts of length 600 mm and fixed complete all as specified and directed.

S&F of 32 mm bore LDPE waste pipe for WHB/ sink of length not less than 80 cm upto floor trap and fixed complete all as specified and directed.

S&F in repairs chromium plated shower rose 125 mm size with or without swivel joints, with shower arms any size including fixing to steel pipe or union of 15 mm bore complete all as specified and directed.

S&F of 15 mm bore stop valves, cast copper alloy, chromium plated, fancy type (Concealed type) with long shank and cup and capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bore wash basin mixer, centre hole for mixing hot & cold water, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs for health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F of 32 mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union, cap and fixed complete all as specified and directed.

S&F in repairs 15 mm bore long body bib taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore two way bib taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore angle/ stop valves, cast copper alloy, chromium plated, fancy type with long shank and cup and capstan head, screwed down, screwed for iron pipe or union complete as specified and directed.

S&F of 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (Concealed type) complete all as specified and directed.

S&F of 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (Concealed type) complete all as specified and directed.

S&F in repairs 20 mm bore CPVC pipes SDR 11 & CPVC SDR 11 brass fittings, fixed on walls/ ceiling or laid in floors complete all as specified and directed.

S&F in repairs 25 mm bore CPVC pipes SDR 11 & CPVC SDR 11 brass fittings, fixed on walls/ ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc; and making good, cutting not exc 10 cm girth complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. and rubbish not exc. 50 m complete all as specified and directed.

Making good under cills, jambs or over arches, lintels and bressummers including all pinning where necessary in cement mortar 1:4 complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in louvres and jallies, 35mm thick (measured solid) including all mouldings but excluding frame and set in CM 1:4 complete all as specified and directed.

Surface dressing n exc 15 cm deep and getting out in any type of soils complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in any type of soils complete all as specified and directed.

Excavation in trenches n exc 1.5 m deep and n exc 1.5 m wide for foundation, manholes, pipes, cable, etc; and getting out in any type of soils complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface and getting out in any type of soils complete all as specified and directed.

M&L for cutting into existing manholes/ septic tanks for connecting new drains, making good to pipes and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching as required for 110 mm dia pipe complete all as specified and directed.

Returning, filling in any type of soil including spreading, levelling, watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

Removing excavated material to a distance exc. 500 m but n exc. 1.5 km and depositing where directed at a level n exc 1.5 mtr above starting point all as specified.

S&F in repairs 75 mm bore PVC (SWR) floor trap plain with SS grating, fixed and jointed with solvent cement complete all as specified and direcetd.

S&F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with MS clamps complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with MS clamps complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed with solvent cement complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F of mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F of mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F of mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc; complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, steel of Fe 410-W (Gde E-250) quality complete all as specified and directed.

S&F for 1.60 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F of rolled mild steel work as in bands, straps, clamps, hold fasts, wall ties, hooks for hanging fans and smilar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F of rolled mild steel framed work as in rafters, purlins, trusses and like (beam, tee, angle, channel or flat sections) including cutting to required length and necessary welding etc; of Fe 410-W(Gde E-250 quality complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, chajjas, etc. and fixed with self tapping screws complete all as specified and directed

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in ridges, hips, valley gutters, drip, straight flashing etc. (length and gith as fixed) and fixed with self tapping screws complete all as specified and directed

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description, exceeding 10cm width or girth and applying one coat of synthectic enamel paint of approved tint complete all as specified and directed.

S&F of mild steel drawer and cupboard locks, size 50 mm, 2 levers with keys and fixed complete all as specified and directed.

Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such asswitches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down of unserviceable old existing service /submain wire of any size and any type complete all as specified and directed.

Taking down of unserviceable distribution boards with MCBs complete all as specified and directed.

M&L for point wiring for one light / fan / bell point with 1.50 sqmm (nominal area) FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one one-way switch, drawn in & including non metallic rigid PVC conduit, concealed (ISI marked) medium grade not less than 20mm diameter with all conduit accessories in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 (except on ceiling for fan point only, surface casing capping will be used in lieu of concealed PVC conduit) including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly, sunken sheet steel terminal box made out of 1.20 mm thick GI/MS sheet for mounting of modular fittings like switches, sockets, fan regulators etc. complete all as specified and directed.

All as per item No. 159.00 here-in-before but for 3 pin 5 Amp socket outlet on independent board.

All as per item No. 159.00 here-in-before but one 3 pin 5 Amp socket outlet on same board.

All as per item No. 159.00 here-in-before but 3 pin 15 Amp socket outlet on independent board and electric wiring with 2.5 sqmm copper conductor cable.

S&F of modular switch piano, one module, single pole, one way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed.

S&F modular socket outlet 2-in-1, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed.

S&F of modular switch piano, one module, single pole, one way, 16 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed.

S&F of modular socket outlet, 2 module multipurpose having provision for 2/3 pin, 6/16 Amp, 230 volt AC complete all as specified and as directed.

S&F of ceiling rose surface bakelite, three terminals, 230 volt AC complete all as specified and as directed.

S&F in replacement single pole and neutral sheet metal enclousers with two pin and earth, plug and socket, suitable for shingle phase 240 Volt including one SP MCB of capacity 20 Amps having 'C' charactristic, breaking capacity 10KA, including industrial plug top complete all as specified and directed.

S&F of modular type lamp holder insulated PVC/Polycarbonated body with back plate for conduit/batten fittings complete ISI marked complete all as specified and directed.

S&F of LED inventor type lamp 10 watt B22 CDL complete all as specified and directed.

S&F in repairs LED tube light complete fitting, 20 W, 240 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable suitable from ceiling rose complete all as specified and directed.

S&F in repairs LED tube light fitting, surface mounted lumanaires, 1 x 20 W, 240 V, decorative ultra slim round /squar profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with bipin holders, LED lamps, connector block, etc. complete with all accessories internally prewired and including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement of LED slim square/circular panel fitting for surface ceiling light 15 Watt colour warm white including connected with including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement recess mounting spot LED light round downlighter designed with excellent thermally managed luminaire 12 Watt , 220 Volt Ac recessed type with high efficiency PMMA diffuser soft glare free light complete driver, holder and LEd lamp suitable for roof ceiling including connecting up driver three core flexible copper conductor c cable of suitable size complete all as specified and directed.

S&F of curved 6 watt LED warm white adjustable multiple angle mirror light including in-built LED driver new generation, energy saving, environmental friendly, long life aesthetically designed for diffused lighting with high power LED as light source complete all as specified and directed.

S&F of ceiling fan complete with blades, down rods and accessories, 230 volts, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note: Old unserviceable ceiling fan will be deposited at MES store yard.

S&F of heavy duty exhaust fan, steel body AC single Phase 230V of size 380 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed. Note: Old unserviceable exhaust fan will be deposited at MES store yard.

S&F of exhaust fan, rust proof steel body, 230 Volts AC, single phase of size 300mm sweep with blades, frame and louvers and all necessary fittings with and including drilling of hole and repair of disturbed surfaces complete all as specified and directed. Note: Old unserviceable exhaust fan will be deposited at MES store yard.

S&F of exhaust fan, PVC body, 230 Volts AC, single phase of size 250mm sweep with blades, frame and louvers and all necessary fittings with and including drilling of hole and repair of disturbed surfaces complete all as specified and directed. Note: Old unserviceable exhaust fan will be deposited at MES store yard.

S&F of vertical type, storage water heater of capacity 25 litre having excellent corrosion resistance, advanced 3 level safety fixture, high grade stainless steel tank with glass line coated, powerful heating element, auto cutoff, 5 star rated energy efficient, LED indicator including all necessary items such as NRV, connection pipe etc. complete all as specified and directed

S&F in repairs integral LED Building security light luminaire of not less than 36 W, luman efficacy not less than 100 lm per watt, comprising of die cast alluminium housing, enclosed with glass cover in frame, IP-66 protection suitable for voltage range should be 170 to 240 Volts with glass cover and washer connecting to electric system complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1 metre long and MS clamp and nut bolts washers and connected with three core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed

S&F of wall mounted fan of metal body with plastic blades, 400 mm sweep, 1350 rpm, 55 watts, 240 V, 50 Hz, air deliver 65 m³ per minute, three Nos of speed controlling complete all as specified and all as directed.

S&F in repairs sheet metal enclosure, double door type, surface mounted concealed in wall 12 ways, 240 Volts, ISI marked, 200 amps bus bar dust and vermin proof (IP-54 protection) suitable for incorporation MCBs and isolators etc complete all as specified and directed. NOTE:- MCB shall be measured and paid separately.

S&F in repair sheet metal enclosure, double door type, surface mounted concealed in wall 8 ways, 240 Volts, ISI marked, 200 amps bus bar dust and vermin proof (IP-54 protection) suitable for incorporation MCBs and isolators etc complete all as specified and directed. NOTE:- MCB shall be measured and paid separately.

S&F in repair sheet metal enclosure, double door type, surface mounted concealed in wall 6 ways, 240 Volts, ISI marked, 200 amps bus bar dust and vermin proof (IP-54 protection) suitable for incorporation MCBs and isolators etc complete all as specified and directed. NOTE:- MCB shall be measured and paid separately.

S&F of MCB, SP, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 6 to 32 Amps including making connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F of MCB, SPN, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 32 Amps including making connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F of MCB, SPN, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 40 Amps including making connection with suitable size aluminium / copper lugs complete all as specified and directed.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100 V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. of 20 mm external diameter and PVC insulated stranded copper conductor of 6 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. Note: Two runs of 6 sqmm cable, one run of 6 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100 V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. of 20 mm external diameter and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. Note: Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

M&L for earthing complete with galvanised steel plate earth electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of size 32x6 mm galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 x 40 x 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and directed.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 10 sqmm, 2 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc; including taking out old unserveciable cable, any type complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. Note:-Compacted/punned thickness shall be measured and paid.

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

S&F in replacement 40mm GI tubing light grade (as per IS -1239) with all fittings as required for passing through cables under floors, along the wall/ pole, etc; with suitable size M.S. flat iron clamps incl nuts, bolts and washers complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 500 litres, hoisted including all fittings as required and fixed in position complete all as specified and directed.

S&F of Gun-metal gate valves of size 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun-metal gate valves of size 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 45354.00

Makewell Enterprises (BID ID -3500187)