ADDN/ALTN SPECIAL REPAIR TO SELECTED MD ACCN AT SAUGAR CANTT

Amount

Note: (i) Please refer schedule 'A' notes before quoting the tender. (ii) Schedule of credit shall be subtracted offline by department.

Demolition of cement concrete un reinforced in ground floors and paving n exc 15cm thickness below or above GL complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete any description and in any position n.exc 15cm thickness complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with kiln burnt bricks (old size) built in CM (1:6) using sub class 'B' bricks straight or curved on plan exceeding 6 meter mean radius complete all as specified and directed.

M&L for Brick work with old size subclass 'B' bricks, straight or curved on plan in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for Raking out joints/ pointing in cement mortar to squared rubble masonry, coursed or uncoursed complete all as specified and directed.

Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 20 mm thick on stone masonry surface or surface other than fair face of brick work in CM 1:6 and finished even and smooth with out using extra cement complete all as specified and directed.

M&L two coat cement plaster ,first coat 15mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cment. (WPC will be paid seperately under respective item) complete all as specified and directed.

M&L Rendering 5mm thick on fair faces of concrete surfaces in CM (1:3) in ceiling complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M & L for complete removal of existing treatment and applying birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of synthetic distemper over a coat of interior primer incl. preparation of surfaces of walls etc complete all as specified and directed.

M & L for applying birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of synthetic distemper over a coat of interior primer incl. preparation of new wall surfaces of walls etc complete all as specified and directed.

M & L for complete removal of existing treatment mechanically and applying two coats exterior weather coat ( ACE paint or equivalent) over one coat of exterior primer, including properly making of v shape crakes and filling of all crakes with crakes seal incl. preparation of surfaces of old decorated walls etc complete all as specified and directed by Engr-in-charge.

M & L for applying two coats exterior weather coat ( ACE paint or equivalent) over one coat of exterior primer including preparation of surfaces of new walls etc complete all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatment and applying two coats of White wash on wall surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of White wash on ceiling surfaces complete all as specified and directed.

M&L three coats of White wash on newly plaster surface of ceiling including preparation of newly surface complete all as specified and directed.

Treatement for sunken portion is as follows :- Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. M&L for providing 12 mm dia holes of 40mm deep @200mm c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry with dr fixit grouting compound by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3, all as specified and as directed by EIC. M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement. M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc. M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick on top. Note :- above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measered complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.50 but n exc n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

M&L 2nd class H/W, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M & L for pressed steel frames for doors 105mmx60mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate complete and back side of pressed steel frames filled with PCC 1:3:6 type C-0 complete all as specified and directed.

M & L for pressed steel frames for doors 125mmx60mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate complete and back side of pressed steel frames filled with PCC 1:3:6 type C0 all as specified and directed.

S&F 35mm thick flush shutters factory made, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S&F 35mm thick glazed and skeleton shutters factory made, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fritted to chowkats complete all as specified and directed.

S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 200 Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L for 300mm Aluminium alloy, anodised, sliding door bolt (not less than 15mm dia) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S&F factory made solid PVC flush door shutter, 28 to 30mm thick (stiles), with 5 mm thick moulded prelam PVC sheet on the front face & 5 mm thick prelam PVC sheet on back face, centre core will be PVC battern supplying & fixing in frame at site complete all as specified and directed by Engineer-in-Charge

S&F 75 mm butt hinges extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed complete all as specified and directed.

S&F 125 mm long aluminium handles cast type anodised etc all as specified complete all as specified and directed.

S&F 125 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for Winpire 3 track pre painted steel sliding window 3-track, 2glass panel and 1 mesh panel ,sliding window fabricated from roll formed section made of galvanized steel colour coated/powder coated (base steel as per IS 513 D quality galvanized as per IS 277 with Zinc of 120gm/sqm ) with total coated thickness of 0.58mm primer coat with epoxy primer of 5-7 micron thick ,finish painted with a polyester paint of 12-16 micron thick and back coated with alkyd backer of 5-7 micron or powder coated with pure polyester up to 50-60 micron thick. section for external frame should be off 107X44 mm, section of shutter should be of 35 x 49 mm. section of mesh should be 35 x 49 mm . the window should be paneled with 5mm thick plain flot glass and stainless steel wire cloth with 0.36mm nominal dia of wire and average width of aperture 1.18mm. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM) . The sections are to be cut to length, join and assembled by mean of corner bracket . The above frames should be fixed to the concrete/ masonary wall by means of self expanding screws. all as specified and directed by Engr-in-Charge

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40 mm x40 mmx 5 mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm,diagonally bracing of 30 mmX5 mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width 0.7 to 1.2 m and ht 1.9 to 2.10 M.]

S&F MS framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors etc conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in hold fasts, coping, filling of ms frame bed blocks, etc complete all as specified and directed.

M&L stainless steel wire cloth, 0.46mm nominal dia of wire and averaging width of aperture 1.14mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinet boxes and cupboard shutter and shelves complete all as specified and directed.

Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick, fixed with nails for 18/19mm thick prelaminated boards complete all as specified and directed.

S&F continuous (piano hinges, mild steel, bright finish or electrogalvanished width of flaps (when opened) 40mm complete all as specified and directed.

S&F Aluminium handles 100mm size, cast type, anodised complete all as specified and directed.

S&F 100 mm Hasp and staple, safety type, aluminium anodised, with mild steel hinge pin includingt bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F 2nd class H/W small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, incl all necessary labours, 50mm mild steel hinges, articles n exc 200cucm each complete all as specified and directed.

S & F MS 300 mm ordinary rat rail tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F mild steel pre painted hat pegs solid body set of six Nos complete all as specified and as directed.

S&F 25 mm bore prepainted MS conduit drapery rods, suitable for door/widows curtain with fancy type powder coated ms dooms with brackets fitted to each end and fixed to wall complete all as specified and directed.

M&L Two coats of synthetic enamal paint over a coat of pink primer on newly wood/wood based surfaces over 10cm width or girth incl preparation of new surface complete all as specified and directed.

M&L Two coats of synthetic enamal paint over a coat of red oxide primer on steel surfaces over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.

M&L for preprations of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and directed.

M&L RCC 1:1.5:3 (nominal mix) type B1 using 20mm graded stone aggregate as in landing, cooking platforms, shelves complete all as specified and directed.

M & L RCC 1:1.5:3 (nominal mix) type B1 using 20mm graded agg as in chajjas complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs, landings, shelves and similar work n exc 200mmm thick horizondal or sloping complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

M&L Mild steel TMT bars above but 6 to 8mm dia bar and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 410-O or Fe 310-O.complete all as specified and directed..

M&L for rolled section/hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecction plates complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil (for provision of plinth protection) complete all as specified and directed.

Excavation over area s , n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

Removing excavated material and thrown exc 50mtr but n.exc 250mtr and depositing where ditected at a level n.exc 1.5mtr above the starting point complete all as specified and directed.

Moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick spread levelled and rammed including watering

M & L broken stone or boulders hard core of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L cement concrete 1 : 3 :6 type C-2 using 40mm graded stone aggregate as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of joints with bituminous compound complete all as specified and as directed by Engr-in-Charge.

M&L 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floors complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block glossy finished, chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment including 30 to 50mm stone dust cushioning complete all as specified and directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding ,removal servicable tiles to store and rubbish off the premises, all as specified and directed..B66

M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L Non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Ditto all as per item no.74 above but in dado / skirting etc. over and including 10mm thick rendering in cm (1:4) complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8mm mm thick (Square/ rectrangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L Non skid ceramic coloured tiles 7 to 8mm mm thick (Square/ rectrangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material & labour for glazed ceramic tiles of size 600x 300 x 7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed.

M & L for black granite stone 18 to 20mm thick machine cut, bedding & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing type over and including 15mm thick screed bed in CM 1:4 as in floor/shelves all as specified and directed

M&L for mirror polished/prepolished Machine cut kota stone single piece slab as in steps tread,windows cill,18-20 mm thick ,over and including 15 mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing , polishing and rounding the edges complete all as specified and directed.

M&L Kota stone slab 12-15 mm thick mirror polished in skirting, steps riser etc over and including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar sitution complete all as specified and directed.

Taking down steel tubing 15mm bore and connection, incl cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm dia tubes medium grade gavanised with all fittings and fixed complete to walls and ceiling or laid in floors complete incl the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly complete all as specified and directed.

Taking down steel tubing 20mm bore and connection, incl cleaning for refixing or removal to store complete all as specified and directed.

S&F 20mm dia tubes medium grade gavanised with all fittings and fixed complete to walls and ceiling or laid in floors complete incl the holes in walls and floors shall be bade by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting n exc 10cm girth. pinning in, making good to facings where required and pointing in CM 1:3 on stone walls complete all as specified and directed.

S&F in repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 400gms) complete all as specified and directed.

S&F CP hot & cold water wall mixure unit with with arrangement for overhead shower and with hot & cold valves cast copper alloy type heavy duty fixed to 15mm bore of pipe complete all as specified and directed.

S&F in repair 15mm bore angle cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms) complete all as specified and directed.

S&F in repair 75 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union complete all as specified complete all as specified and directed.

S&F Wash hand basin mixture15mm bore cast copper alloy, with capstan heads, chromium plated, screwd down high pressure, with lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipes and fixed in repairs complete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including 'P' or 'S' Trap, etc complete all as specified and directed complete all as specified and directed.

S&F in repair vitreous china WHB white flat back size 550x400mm including S&F angle iron brackets, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia complete all as specified & directed.

S&F Vitreous China full size pedestal for wash hand basin complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 610mm x 460mm x 254mm, bowl size 560mm x 405mm x 254mm ( cat no. 1224SD) of make prayag or equivalent complete all as specified & directed.

S&F Stainless steel kitchen plate rack of size 24" X 30" X 10" (cat no. P-330) of make prayag or equivalent complete all as specified and directed.

S&F in repair PVC low level flushing cistern of 10 Ltr capacity, dual (5 Ltr/10 Ltr) valve less including flushing pipe bend PVC bend etc. complete all as specified and directed.

S&F PVC connection on pipe 450mm long with brass nut bolt complete all as specified and directed.

S&F Brass chromium plated tubular towel rail 600mm long between flanges, 20mm dia, D type etc complete all as specified and directed.

S&F soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug etc complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.

Dismantling water tanks of 500 ltr capacity and removing from site complete all as specified and directed.

S&F 500 ltr capacity of rotational moulded polyethyline water storage tank (Cylindrical vertical with closed tape) hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified & as directed .

Disconnecting existing tanks, setting aside, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. lowering and hoisting if required. Reconnecting and re-fixing in position complete all as specified and directed.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & as directed

S&F 15mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified & as directed

S&F in repair PVC (SWR) Pipe single socketed in any length with adhesive joint laid in floor or fixed to wall with clamps for 110mm dia complete all as specified & as directed

S&F in repair PVC (SWR) Pipe single socketed in any length withadhesive joints laid in floor for or fixed to wall with clamps 75mm dia complete all as specified & as directed

S&F in repair PVC Bends any radius 110mm dia provided with axcess door complete all as specified & as directed

S&F in repair PVC Bends any redius 75mm dia provided with axcess door complete all as specified & as directed

S&F in repair PVC (SWR) Junction single T equal or unequal 110mm dia provided with eccess door complete all as specified and directed.

S&F in repair PVC (SWR) Junction single T equal or unequal 75mm dia provided with eccess door complete all as specified & as directed.

S&F in repair PVC vent cowl 110mm dia complete all as specified & as directed

S&F in repair for 75mm outlet dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height etc .

M&L for PCC(1:2:4)type Bo using 12.5mm graded stone aggregates mixed with integral waterproofing chemical/compound as in padding on roof surfaces for correcting /making proper slope on roof,surface finished fair and even without using extra cement complete all as specified and directed. (WPC will be measured and paid for separately)

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified. The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified as under:- (a) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. (b) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (c ) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (d) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (e) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane

M&L for cement concrete tiles 25cm x 25cm x 22mm thick,with grey cement and no pigment, machine pressed; set, jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15 mm screed be in CM (1:4) complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed.

Labour only for removal of unsound RCC by hammer chiseling or pneumatic chopper and exposing reinforcement all around including providing jacking up arrangement or temporary supports of adequate strength to avoid any damage to the existing structure and removing rubbish to outside MD land complete all as specified as directed.

M & L for cleaning exposed rusted reinforcement in site with wire brushes and applying polymer based rust remover of make Dr fixit Rust Remover (Rust removing chemical) or 'Defroster" or equivalent chemical as approved as per manufacturers instructions complete all as specified and as directed

Labour only for welding with new additional reinforcement bars as required of site i.e. where dia of existing bar is found reduced than the original size of bars complete all as specified and directed Note: supply only reinforcement bars will be measured and paid separately under respective items here in before complete all as specified and directed.

M&L for priming the old and / or new steel reinforcement with one coat of Fosroc 'Nito Zinc primer" or Dr Fixit epoxy zinc primer or equivalent as approved by brush application complete all as specified and directed.

M&L for hard drawn steel wire fabric cut to length bent to shape, dia of fabric 3 mm and aperture 50 mm, cover entire steel surface, not exceeding 4 kg per Sqm complete all as specified and directed

M&L for bounding the entire exposed surface with one coat of "Fosroc Nitcobond SBR" as per manufacturers instructions complete all as specified and directed

M & L for one layer of Fosroc spray for SL concrete 20mm thick (comprises composition 1:2:1 plain cement concrete i.e. one part of cement two parts of fine aggregate and one part of 10mm and down size trap stone aggregate) mixed with spray set SL 2 to 2.5 % weight of cement and 12.5 to 16.5 liter of water mixed as per manufacturers instructions an gunnting pressure nozzle with a delivery capacity of 2.5 kg Sqm over column beam roof slab and other similar work complete all as specified and directed.

M & L for 10 mm thick rendering in cement mortar 1:4 over guniting concrete surface and finished the surfaces even and smooth or matching/ flushing with adjoining plastered surfaces complete all as specified and directed.

Demoltion and breaking up existing sewage (SGSW / AC pipes and the like , 150mm bore set in cement mortar and removing demolished material to a distance exc 50m and n exc 100m complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in coping, bed plates, kerbs, etc. including necessary form work complete all as specified and as directed.

Material and labour for rending 15 mm thick in cement mortar (1:4) on wall, finished even and smooth without using extra cementcomplete all as specified and as directed.

Material and labour for plain cement concrete Type B-2 (1:2:4) using 20 mm graded stone aggregate as in surface channel & drain complete all as specified and as directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement, concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

M&L for concrete bed of PCC 1:4:8 type D2 using 40mm graded stone aggregate for SGSW pipes 150mm bore, bedding and hanching completely after pipes are laid, jointed and tested complete all as specified and directed.

Supply and laying of salt glazed stone ware pipes 150mm bore grade 'A' laid in trenches and jointed in cm (1:1) incl testing complete all as specified and directed.

Supply and laying of salt glazed stone ware bends and taper bends, any radius size 150mm bore grade 'A' laid in trenches and jointed in cm (1:1) incl testing complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required(Internal dia of pipe 150mm) complete all as specified and directed.

Cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar l:1 (Internal dia of pipe 150mm) complete all as specified and directed.

M&L for providing precast cement concrete (RCC) nominal mix, 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc), chullah hoods, chajjas, water troughs nangers, shelves and similar articles with plain faces and setting in cement mortar 1:4 complete with joints to match including necessary form work complete all as specified and directed.

M&L Mild steel TMT bars above but 6 to 8mm dia bar and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 410-O or Fe 310-O.complete all as specified and directed..

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc complete all as specified and directed.

Taking down main switch, DB/change over/MCCB, AC box of any capacity complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sqmm FRLS PVC insulated, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc/square TW Mica Top blocks at junction for batten holders, ceiling rose etc screws, gutti/roul plugs PVC all as per site requirement including MS sunken boxes made out of ms sheet and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green

(a) For one light, fan point controlled by one switch

(b) For one call bell point controlled by one push button switch.

(c) For one 5 Amp independent socket point controlled by one switch

(d) For one 3 pin ,5 Amp socket point with other switch on the same board

(e) One light point controlled by two way switch

All as per item No 3 here in before but for power point wiring using with 2.5 sqmm FRLS PVC insulated , unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.

S&F switch piano type flush, single pole, one way, 5 Amp 230 Volt.

S&F switch single pole, two way, 5 Amp 230 Volt.

S&F socket outlet , 5 pin, 5 Amp flush, 230 Volt.

S&F switch piano type flush, single pole, one way,15Amp 230 Volt .

S&F socket outlet 2 in 1, 6 pin, 5/15 Amp ,flush type universal shuttered 230 Volt complete.

S&F ceiling rose, surface backlit, 63.5x48 mm three terminal.

S&F call bell ding dong type 230 Volt complete all as specified and directed.

S&F bell push flush type one way 5 Amp 240 Volt.

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting with 9 Watt LED bulb.

S&F testing and commissioning of MCB SP 6-40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs.

Same as item no 162.00 but SPN 32- 63 Amps, 240 V.

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size.

S&F double door metallic sheet metal enclosure for DB double door(DPX-125 ) VTPN 4 Way 415 Volts with 200 Amps rated bus bars IP 43- "IK 08.

S&F MCCB 63 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs all as specified and directed. .

S&F electronic double space rotary step type 5 speed regulator 120- 280 V,

S&F surface/wall mounted LED based batten type fitting, 4 feet long of capacity 20 watts, operating on 240 volts, AC, 50Hz supply. Fitting should be made out of co-extruded polycarbonate channel, ultra slim with housing part in white finish and diffuser part in opel finish, decorative ABS end caps. LED electronic drive shall be SMPS based with constant current input, luminous efficiency ≥ 100 Imn/watt, total luments output not less than 2010 lumens, CCT 6500K, CRI≥80 and IP 20 protection complete all as specified and directed.

M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 2009 specification complete all as specified and directed.

S&F surface/wall mounted LED based decorative oval bulk head luminaries comprising of high brightness LEDs, housed in oval shaped pressure die-cast aluminium housing, ring, corrosion resistant type, epoxy powder coated finish, polycarbonate diffuser having system powers 10watt, operating voltage 240 volt, CRI≥80, pfI≥0.95, lumens output 800 lmns CCT 6500k, lmn/watt≥ 80, with IP65 protection complete all as specified and directed.

Taking down and refixing of ceiling fan of existing location complete all as specified and directed.

Taking down and refixing connecting electric meter SP up to 40 amp incl S & F suitable PVC/Wooden board close recessed type of suitable size

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green

S&F box type LED optic fitting 1 x 9 Watt 2 feet box type complete . as specified and directed by Engr -in -Charge

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep, metallic body, including making holes in any type of wall construction to accommodate exhaust fans and making good the disturbed portion to match with the existing surfaces complete all as specified and directed..

S&F electric water heater (Geyser) ISI Marked 25 ltr capacity AC 230 V 5 Star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories complete all as specified and directed.

S&F of GI tubing medium grade of size 15mm bore including all fitting & fixtures on wall/ceiling/floors complete all as specified and directed

Supply and fixing PVC connection pipe 15 mm dia with PTMT nuts and bolts of length 450mm suitable for cold and hot water coupling nut of brass, heavy duty, complete all as specified and directed.

S&F 15 mm bore stop valves chromium plated alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or unions and fixed all as specified and directed.

S&F 15 mm bore bib tap chromium plates alloy with crutch or butterfly handle screwed down fancy type screwed for iron pipe or brass ferruble and fixed all as specified and directed.

S&F ceiling fan 1200 mm sweep 'BEE' rating confirming to IS metallic white colour with, single phase connecting with existing point for suitable wire with all accessories complete all as specified and directed. .

Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 25 sqmm 3.5 core as specified and directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for laying of cable as the case may be and getting out in any type of soil.

M&L for sand cushioning in trenches for the cable etc all as directed by Engr-in-charge.

Returning filling, spreading, leveling, watering and well ramming in layers n. exc 25 cm thick complete.

Removing excavated surplus material n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr from starting point.

S&L kiln brunt bricks sub class B laid in trenches for cable protection complete

S&F GI Pipe light grade 40mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers)

Schedule of credit (to be deducted offline by the department) (-) 4,59,112.00

Jyoti enterprises

SHIV SHANKAR MISHRA

M/s Raghav Traders

POONAM ELECTRIC INDUSTRY

R. S. JAIN AND SONS

M/s AJAY JAIN

M/s JAYPEE ENTERPRISES

Raja enterprises

Manak landmarks