Construction of Proposed Storage Yard Buildings for Project Raw Materials at ARDC Division HAL DC

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Construction of Proposed Storage Yard Buildings for Project / Raw Materials at ARDC Division, HAL [DC]. CONTRACT NO. HAL/FMD/C-154A/24-25

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

Part 'I' - Civil Works

1 Removing / transporting the surplus excavated earth including debris, vegetation waste, concrete waste, etc., to a distance upto 5000m outside HAL premises / to contractor's own yard including loading, unloading, depositing, spreading, levelling etc, all complete as per directions of Engineer-in-Charge. 147.00 Cu m 300.13 Rupees Three Hundred and Thirteen Paise Only 44119.11

2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains, pipes, cables, ramp sides, etc., in all kinds of soils (not exceeding 1.50m in width or 10Sq m on plan), including dressing of sides and ramming of bottoms, for all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge. 259.00 Cu m 239.16 Rupees Two Hundred Thirty Nine and Sixteen Paise Only 61942.44

3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing, etc., (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m for all lifts with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge. 350.00 Cu m 163.08 Rupees One Hundred Sixty Three and Eight Paise Only 57078.00

4 Returning / Filling in available useful excavated earth (excluding rock) free from salts, organic or other deleterious matter (Other than black cotton soil & rock, etc.,) in trenches, plinth, sides of foundations, etc., in layers not exceeding 20cm in depth, consolidating each deposited layer by watering, breaking / removing clods exceeding 50mm, ramming and consolidation etc., with all labour, tools & tackles, plant & machinery, etc., lead up to 50 m and lift upto 1.50m, etc., all complete as directed by Engineer-in-Charge. 461.00 Cu m 180.08 Rupees One Hundred Eighty and Eight Paise Only 83016.88

5 Providing, mixing and laying in position cement concrete (1:4:8) derived from natural sources of required thickness using 40mm down graded hard stone / granite aggregate in accordance with IS 456 in all works up to plinth level, including mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering and shuttering, etc., all complete as directed by the Engineer-in-Charge. 309.00 Cu m 6258.39 Rupees Six Thousand Two Hundred Fifty Eight and Thirty Nine Paise Only 1933842.51

6 Providing, mixing and laying in position 50mm thick of cement concrete 1:3:6, using 20mm down graded aggregates including necessary excavation, levelling & dressing & finishing the top smooth, etc., all complete as directed by the Engineer-in-Charge. 483.00 Sq m 688.41 Rupees Six Hundred Eighty Eight and Forty One Paise Only 332502.03

7 Supplying, mixing and placing plain cement concrete (1:2:4) of required thickness using 20mm nominal size down graded hard stone / granite aggregate in accordance with IS 456 in Cills, fillets, coping, etc., upto floor five level, including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by the Engineer-in-Charge. 13.50 Cu m 9091.01 Rupees Nine Thousand Ninety One and One Paise Only 122728.64

8 Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330 kg/m3 design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-Charge. Note: (i) Site design mix to be obtained from Govt. / NABL laboratory for site batching concrete. (ii) Small quantity is as approved by EIC in volumetric proportion.

a) All works upto plinth level including necessary openings and packing if any for laying pipes, cables, etc., 375.00 Cu m 8732.29 Rupees Eight Thousand Seven Hundred Thirty Two and Twenty Nine Paise Only 3274608.75

b) All works above plinth level upto floor V level including necessary openings and packing if any for laying pipes, cables, etc., 499.00 Cu m 9059.04 Rupees Nine Thousand Fifty Nine and Four Paise Only 4520460.96

9 Formwork (Centering and shuttering including strutting, propping etc, and removal of form) for the following RCC members which are defined as below, in fair finished by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below. Note: Formwork material is contractor's own property and shall be removed after completion of work.

a) Foundations, footings, bases of columns, plinth drain, ramp concrete, pedestal, etc., for mass concrete 907.00 Sq m 360.28 Rupees Three Hundred Sixty and Twenty Eight Paise Only 326773.96

b) For Roofs, landings, suspended floors, Slabs supported on walls, roof landings, balconies, access platforms, Gutters, Catwalks, decks, etc., 511.00 Sq m 851.90 Rupees Eight Hundred Fifty One and Ninety Paise Only 435320.90

c) Plinth beams, Lintels, Beams, etc., 1971.00 Sq m 676.56 Rupees Six Hundred Seventy Six and Fifty Six Paise Only 1333499.76

d) For Columns, Pillars, Piers, etc., 1482.00 Sq m 883.18 Rupees Eight Hundred Eighty Three and Eighteen Paise Only 1308872.76

e) Chajja, Weather shade, Canopies, Corbels, etc., including edges 252.00 Sq m 873.81 Rupees Eight Hundred Seventy Three and Eighty One Paise Only 220200.12

10 Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry. 156535.00 Kgs 99.10 Rupees Ninety Nine and Ten Paise Only 15512618.50

11 Brick work with common burnt clay bricks of class designation 7.5 in superstructure above plinth level in all shapes and sizes, including hoisting and setting in position with cement mortar 1:6 (1 cement : 6 coarse sand) and along with necessary finishing, making or leaving holes & chases and making good, etc., all complete as directed by the Engineer-in-Charge. 430.00 Cu m 8365.91 Rupees Eight Thousand Three Hundred Sixty Five and Ninety One Paise Only 3597341.30

12 Half brick masonry with common burnt clay bricks of class designation 7.5 in superstructure above plinth level in all shapes and sizes, including hoisting and setting in position with cement mortar 1:4 (1 cement : 4 coarse sand) and along with necessary finishing, making or leaving holes & chases and making good, etc., all complete as directed by the Engineer-in-Charge. 8.00 Sq m 1032.48 Rupees One Thousand Thirty Two and Forty Eight Paise Only 8259.84

13 Construction of Coursed rubble masonry (first sort) in cement mortar (1:6) with hard stone, solidly hearted faces, beds and joints squared back, in foundation and below plinth including levelling up with cement concrete 1:6:12 ( 20 mm nominal size aggregate) upto plinth level, raking out joints 10mm deep, curing, providing weep holes if any, etc., all complete as directed by the Engineer-in-Charge. 20.00 Cu m 8095.89 Rupees Eight Thousand Ninety Five and Eighty Nine Paise Only 161917.80

14 Providing and fixing expansion hold fasteners on C.C. / R.C.C. / Brick masonry surface backing including drilling necessary holes and the cost of bolt of Wedge expansion type, etc., complete as per direction of Engineer-in-Charge.

a) Fastener with threaded dia 6mm each 304.00 Each 33.76 Rupees Thirty Three and Seventy Six Paise Only 10263.04

b) Fastener with threaded dia 10mm each 16.00 Each 36.75 Rupees Thirty Six and Seventy Five Paise Only 588.00

15 Providing and fixing Ceramic glazed wall tiles / Vitrified tiles / Anti skid / Matt finished conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and set & jointing with neat grey cement slurry @ 3.3kg per Sq m, including pointing in white cement mixed with pigment of matching shade complete , including machine cutting, curing, etc., all complete as directed by the Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing, etc., 68.00 Sq m 1164.91 Rupees One Thousand One Hundred Sixty Four and Ninety One Paise Only 79213.88

16 Providing and fixing M.S. grills of required pattern to openings / steel windows / walls in frames of windows, ventilators, etc., and approved design using MS structurals such as M.S flats, angles, round / square bars, etc., including necessary cutting, welding, embedding in concrete, masonry, etc., including priming coat with approved steel primer, etc., all complete as directed by the Engineer-in-Charge. 1554.00 Kgs 201.30 Rupees Two Hundred One and Thirty Paise Only 312820.20

17 Providing and fixing Fire resistant door frame of section [143 x 57]mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/Sq m) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size [10 x 4]mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc and including necessary accessories, etc., all complete as per direction of Engineer-in-Charge. 45.00 R m 1570.34 Rupees One Thousand Five Hundred Seventy and Thirty Four Paise Only 70665.30

18 Providing and fixing 50mm thick glazed Fire resistant door shutters with view panel of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with all necessary fittings along with stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer, etc., all complete as per direction of Engineer-in-Charge. 14.00 Sq m 6920.98 Rupees Six Thousand Nine Hundred Twenty and Ninety Eight Paise Only 96893.72

19 Providing and fixing panic bar / latch (Double point) to the fire resistant door fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- Charge, etc., all complete as per direction of Engineer-in-Charge. 5.00 Each 7686.23 Rupees Seven Thousand Six Hundred Eighty Six and Twenty Three Paise Only 38431.15

20 Providing and fixing Fly proof stainless steel grade 304 wire gauge with 0.50mm dia. wire and 1.40mm wide aperture fixing to the Windows, Ventilators, Aluminium sections, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge. 55.00 Sq m 1654.13 Rupees One Thousand Six Hundred Fifty Four and Thirteen Paise Only 90977.15

21 Supplying, fabricating and fixing second class teak wooden plain, solid, straight chowkats and frames of doors, windows, partitions, wall panelling frames and other frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed to wall or in position with hold fast lugs or with dash fasteners of required dia & length, etc., all complete as directed by the Engineer-in-Charge. Note: Hold fast lugs or dash fastener shall be paid separately. 0.20 Cu m 131332.01 Rupees One Lakh Thirty One Thousand Three Hundred Thirty Two and One Paise Only 26266.40

22 Providing, fabricating and fixing 30mm thick flush door shutters for Toilet entrance conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched teak 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and provision of rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames / chowkats, etc., all complete as directed by the Engineer-in-Charge. 4.00 Sq m 3335.27 Rupees Three Thousand Three Hundred Thirty Five and Twenty Seven Paise Only 13341.08

23 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section [90 x 45]mm having single rebate of [32 x 15]mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, etc., all complete as directed by the Engineer-in-Charge. 11.00 R m 524.56 Rupees Five Hundred Twenty Four and Fifty Six Paise Only 5770.16

24 Providing and fixing to existing door frames 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels, including provision of internal wood lipping, rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames / chowkats, etc., conforming to IS: 14856, etc., all complete as directed by the Engineer-in-Charge. 5.00 Sq m 3418.37 Rupees Three Thousand Four Hundred Eighteen and Thirty Seven Paise Only 17091.85

25 Providing [40 x 5]mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block [30 x 10 x 15]cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), etc., all complete as per direction of Engineer-in-Charge. 16.00 Each 210.25 Rupees Two Hundred Ten and Twenty Five Paise Only 3364.00

26 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc., all complete as directed by Engineer-in-Charge. 4.00 Each 111.76 Rupees One Hundred Eleven and Seventy Six Paise Only 447.04

27 Providing and fixing bright finished brass mortice latch and lock of 6 levers, vertical type, and a pair of 100mm lever brass handles of approved quality, polished bright of approved manufacture to door with all necessary screws, bolts, nuts and washers of approved manufacture, etc., all complete as directed by Engineer-in-Charge. 4.00 Each 785.19 Rupees Seven Hundred Eighty Five and Nineteen Paise Only 3140.76

28 Supplying and fixing the Polished (bright finished) brass barrel type tower bolts 250mm long X 10mm with barrel of extruded sections of brass, of approved make and rolled or drawn brass bolt, design to door with all required screws, bolts, nuts, washers, etc., conforming to IS 204 (Part 2), etc., all complete as directed by Engineer-in-Charge. 8.00 Each 405.72 Rupees Four Hundred Five and Seventy Two Paise Only 3245.76

29 Providing and fixing aluminium sliding door bolts(aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc., all complete as directed by Engineer-in-Charge. 12.00 Each 239.42 Rupees Two Hundred Thirty Nine and Forty Two Paise Only 2873.04

30 Providing and fixing 20mm dia chromium plated brass curtain rod / Towel rail of 600mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves, etc., wherever necessary, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 216.77 Rupees Two Hundred Sixteen and Seventy Seven Paise Only 433.54

31 Providing and fixing 5mm thick glass panes for doors, windows and clerestory window,ventilators (weight not less than 12.50 kg/Sq m), including cutting an dfinishing as per site requirement, etc., all complete as directed by Engineer-in-Charge. 3.00 Sq m 2389.11 Rupees Two Thousand Three Hundred Eighty Nine and Eleven Paise Only 7167.33

32 Providing and fixing aluminium handles of 125mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 4.00 Each 60.86 Rupees Sixty and Eighty Six Paise Only 243.44

33 Providing and fixing aluminium tower bolts of size [250 X 10]mm, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 4.00 Each 105.79 Rupees One Hundred Five and Seventy Nine Paise Only 423.16

34 Providing and fixing bright finished brass butt hinges [125 X 70 X4 mm) with necessary screws etc. all complete as directed by Engineer-In-Charge. 12.00 Each 170.12 Rupees One Hundred Seventy and Twelve Paise Only 2041.44

35 Providing and fixing ISI marked aluminium butt hinges (125 X 75 X 4]mm anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyedto required colour or shade with necessary screws, etc., all complete as directed by Engineer-in-Charge. 8.00 Each 137.91 Rupees One Hundred Thirty Seven and Ninety One Paise Only 1103.28

36 Providing and fixing aluminium hanging floor single rubber door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 36.39 Rupees Thirty Six and Thirty Nine Paise Only 72.78

37 Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 780.97 Rupees Seven Hundred Eighty and Ninety Seven Paise Only 1561.94

38 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, with double speed adjustment with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 903.26 Rupees Nine Hundred Three and Twenty Six Paise Only 1806.52

39 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, with double speed adjustment with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 1033.44 Rupees One Thousand Thirty Three and Forty Four Paise Only 2066.88

40 Providing and fixing stainless steel fancy handle to fire rated doors of approved make fixed with SS screws, etc., all complete as directed by Engineer-in-Charge. 5.00 Each 171.49 Rupees One Hundred Seventy One and Forty Nine Paise Only 857.45

41 Structural steel work riveted, bolted or welded in built up sections, trusses, ladders, chequered plates, staircases and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge. 132508.00 Kgs 122.84 Rupees One Hundred Twenty Two and Eighty Four Paise Only 16277282.72

42 Providing and fixing stainless steel ( Grade 304) railing of approved size / design by welding, etc., made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts, etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, etc.), etc., all complete as directed by the Engineer-in-Charge. 1876.00 Kgs 709.63 Rupees Seven Hundred Nine and Sixty Three Paise Only 1331265.88

43 Providing and laying Glazed vitrified tiles Matt / Anti skid polished finish size in floors as indicated below for Paper Joint of tile size of [600 X 600]mm (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.3 Kg/Sq m including grouting the joints with white cement and matching pigments, etc., all, complete as directed by the Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing, etc., 25.00 Sq m 1345.81 Rupees One Thousand Three Hundred Forty Five and Eighty One Paise Only 33645.25

44 Providing, fixing, testing and commissioning single socketed pipes of 110mm dia unplasticised Rigid PVC pipes of 6 kg/cm² SWR grade and of approved make conforming to IS : 13592 Type A, including jointing together with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion and all necessary fittings & specials, bends, branches, sockets, clamps, pipe cutting and wastages, cutting and making good the walls, connecting to existing lines, etc., along with removal of existing rain water pipes, etc., all complete as directed by the Engineer-in-Charge. 396.00 Metre 346.73 Rupees Three Hundred Forty Six and Seventy Three Paise Only 137305.08

45 Providing and fixing precoated galvanised steel sheet roofing accessories for ridges plain (500 - 600mm), 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per Sq m as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws, etc., all complete as directed by the Engineer-in-Charge. 50.00 R m 489.09 Rupees Four Hundred Eighty Nine and Nine Paise Only 24454.50

46 Providing and fixing precoated galvanised steel sheet roofing accessories for Flashings / Aprons (upto 600mm), 0.50mm (+0.05 %) total coated thickness, Zinc coating 120 grams per Sq m as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws, etc., all complete as directed by the Engineer-in-Charge. 167.00 R m 446.14 Rupees Four Hundred Forty Six and Fourteen Paise Only 74505.38

47 Providing, applying and laying 12mm thick cement plaster work in for internal / External areas of Ceilings, Chajjas etc in CM (1:4) including forming grooves not exceeding 10mm wide and not exceeding 10mm deep as per requirement as directed including preparation of surface by hacking, etc., at all levels with necesary materials, labour, scaffoldings, curing, tools and tackles, plants, etc., threading if any as directed, etc., all complete as directed by the Engineer-in-Charge. 474.00 Sq m 318.85 Rupees Three Hundred Eighteen and Eighty Five Paise Only 151134.90

48 Providing, applying and laying cement mortar (1:6) plastering 15mm thick on brick / solid blocks / concrete surfaces, finished even and smooth with trowel for Internal areas, including supply and fixing of hexagonal chicken mesh minimum 150mm wide having opening [20 x 20]mm of 26 gauge at juncitons of concrete & brick work or between different material, including making grooves as per the requirement not exceeding 10mm width and not exceeding 10mm deep with necesary materials, labour, scaffolding, curing, tools and tackles, etc., at all heights, etc., all complete as directed by the Engineer-in-Charge. 2637.00 Sq m 351.89 Rupees Three Hundred Fifty One and Eighty Nine Paise Only 927933.93

49 Providing, applying and laying 18mm thick cement plaster work in two coats for external areas as directed. First coat 12mm thick in cement mortar (1:5) made rough to recieve top coat, second coat 6mm thick in cement mortar (1:6) , final surface finished with a floating coat of neat cement after necessary preparation of surface, at all levels including supply and fixing of hexagonal chicken mesh minimum 150mm wide having opening [20 x 20]mm of 26 gauge at juncitons of concrete & brick work or between different material, with necesary materials, labour, scaffoldings, curing, tools and tackles, plants etc., threading if any as directed, etc., all complete as directed by the Engineer-in-Charge. 4904.00 Sq m 476.42 Rupees Four Hundred Seventy Six and Forty Two Paise Only 2336363.68

50 Painting newly plastered external surfaces with two or more coats applied at 1.43 litre /10 Sq m as per manufacturer specifications of 100% premium acrylic emulsion paint having VOC less than 50 grams / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint with silicon additives of approved make, colour, shade, tint & pattern at all levels, over and including a coat of approved acrylic primer including preparing the surface by removing loose dirt and any organic growth, filling of cracks, necessary scaffolding, etc., all complete as directed by the Engineer-in-Charge. Note: The paint shall have anti-algal, anti-fungal, UV resistant & anti-tarnishing qualities with 100% acrylic base and silicon or elastomeric additives. 3749.00 Sq m 166.53 Rupees One Hundred Sixty Six and Fifty Three Paise Only 624320.97

51 Painting Wooden surfaces of any description with two coats of synthetic enamel paint conforming to IS 2932, of approved colour and manufacture over a coat of primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content, with ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams / litre including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth and even surface, applying knifing paste filler putty before painting the first coat, etc., all complete as directed by the Engineer-in-Charge. 20.00 Sq m 272.50 Rupees Two Hundred Seventy Two and Fifty Paise Only 5450.00

52 Painting Steel surfaces of any description with two coats of synthetic enamel paint of approved colour, brand and manufacture to give an even shade, including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth, etc., all complete as directed by the Engineer-in-Charge. 1095.00 Sq m 207.87 Rupees Two Hundred Seven and Eighty Seven Paise Only 227617.65

53 Painting newly plastered interior surfaces with two coats of premium acrylic emulsion paint of interior grade having VOC (Volatile Organic Compound) content less than 50 grams / litre conforming to IS 15489, of approved make, brand, colour, shade, tint, manufacture & pattern at all levels, including preparing the surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even and smooth by providing and applying white cement based putty of average thickness of 1mm in 2 coats of approved brand and manufacture over the plastered wall surface and followed by the applying priming coat with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content With water thinnable cement primer on applied putty having VOC content less than 50 grams/litre, necessary scaffolding, etc., all complete as directed by the Engineer-in-Charge. 3135.00 Sq m 342.51 Rupees Three Hundred Forty Two and Fifty One Paise Only 1073768.85

54 Demolition of reinforced cement concrete work of any description and in any position manually / by mechanical means using pneumatic tools, breaking to pieces of any thickness or volume, if necessary stockpiling and stacking servicable and unservicable materials seperately at designated locations and disposal of demolished / rubbish / unserviceable / dismantled or waste material (Except saleable materials) by mechanical transport outside HAL upto a total lead of 11kms for all lifts, including cutting reinforcement bars, etc., all complete as directed by the Engineer-in-Charge. 112.00 Cu m 3043.76 Rupees Three Thousand Forty Three and Seventy Six Paise Only 340901.12

55 Supply, laying and compacting of granular sub-base in flooring, subbases, ramps, etc., upto plinth level of requisite grading by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, etc., all complete as per specifications and directions of Engineer-in-Charge. 383.00 Cu m 2580.30 Rupees Two Thousand Five Hundred Eighty and Thirty Paise Only 988254.90

56 Providing and placing in position 100mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.60mm thick, 100mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site, etc., all complete as per direction of Engineer-in-Charge. 245.00 Sq m 2831.47 Rupees Two Thousand Eight Hundred Thirty One and Forty Seven Paise Only 693710.15

57 Providing and laying design mix cement concrete of M-30 grade manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer in roads / hardstandings / flooring using cement content as per design mix, using coarse sand and graded stone aggregate of approve size in appropriate proportions as per approved & specified design criteria, laying over reinforcement, spreading and compacting mechanically by using needle vibrator, levelling to the required slope / camber, finishing with required texture including steel form work with sturdy M.S channel sections, curing making provision for contraction / expansion joints, construction and longitudinal joints [10mm wide X 50mm deep] by groove cutting machine, providing and filling joints with approved joint filler and sealent, etc., all complete as per the drawings/directions of Engineer-in-Charge. Note: Cement content considered in M-30 is @ 340 kg/Cu m. 308.00 Cu m 10196.47 Rupees Ten Thousand One Hundred Ninety Six and Forty Seven Paise Only 3140512.76

58 Providing and fixing pre-moulded joint filler in joints of RCC roads / CC pavements, flooring after making the joints dust free with high pressure air jet cleaners including providing [10 X 10]mm joint sealant compound, etc., all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.), complete as per the drawings/directions of EIC. 505.00 Per 4 cm depth per cm width per m length 19.47 Rupees Nineteen and Forty Seven Paise Only 9832.35

59 Providing and filling in position rubberized bitumen hot sealing compound of grade 'A'conforming to IS: 1834 for sealing of joints in roads / pavements. Flooring, etc., all complete as per direction of the Engineer-in-Charge. 505.00 Per cm depth per cm width per m length 7.95 Rupees Seven and Ninety Five Paise Only 4014.75

60 Providing and fixing beveled edge mirror of size [600 x 450]mm of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., all complete as directed by Engineer-in-Charge. 4.00 Each 1477.27 Rupees One Thousand Four Hundred Seventy Seven and Twenty Seven Paise Only 5909.08

61 Providing and fixing Wall hung half pedestal Vitreous China Wash basin size of approx size [630 x 450]mm fixed with with C.I. brackets / rack bolts , single 15mm C.P. brass pillar taps, 32mm C.P. brass waste coupling of standard pattern, P.V.C. waste pipe with waste fittings of 40mm dia and make it function of approved brand/make, including painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as per direction of Engineer-in-Charge. 3.00 Each 2152.63 Rupees Two Thousand One Hundred Fifty Two and Sixty Three Paise Only 6457.89

62 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including cutting and making good to the walls and floors wherever required, etc., all complete as per direction of Engineer-in-Charge. 2.00 Each 5986.03 Rupees Five Thousand Nine Hundred Eighty Six and Three Paise Only 11972.06

63 Providing and fixing 8mm dia C.P. / S.S. Jet (Health Fuacet) with flexible tube upto 1 metre long with S.S. triangular plate on walls/Eureopean type W.C. material of approved make and quality all, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 320.77 Rupees Three Hundred Twenty and Seventy Seven Paise Only 641.54

64 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size [610 x 390 x 370]mm having pre & post flushing with water [250 ml & 500 ml consumption], having water inlet from back side, including fixing to wall with suitable brackets embedded in cement mortar (1:3), connecting the waste pipe to floor trap with all necessary fittings and accessories like 32mm dia semi-rigid PVC waste pipe (concealed in the wall) including PVC waste fittings, clamps, etc., all as per manufacturers specification and direction of Engineer-in-Charge. 3.00 Each 7426.18 Rupees Seven Thousand Four Hundred Twenty Six and Eighteen Paise Only 22278.54

65 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour, etc, all complete as directed by the Engineer-in-Charge. 2.00 Each 213.11 Rupees Two Hundred Thirteen and Eleven Paise Only 426.22

66 Providing, fixing, testing and commissioning trap [floor trap] of approved make with 100 mm inlet and 75 mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150 mm thick cement concrete (1:2:4) for embedding the trap,etc.,all complete as directed by the Engineer-in-Charge. 10.00 Each 543.34 Rupees Five Hundred Forty Three and Thirty Four Paise Only 5433.40

67 Providing and fixing of toilet paper holder of C.P brass type, etc., all complete as directed by Engineer-in-Charge. 4.00 Each 738.39 Rupees Seven Hundred Thirty Eight and Thirty Nine Paise Only 2953.56

68 Providing and fixing of ball valve (brass) 25 mm nominal bore dia, of approved quality, High or low pressure, with plastic floats, screwed for iron pipe or brass ferrule and fixed,including necessary fittings i.e flynut, etc., all complete as directed by the Engineer-in-Charge. 1.00 Each 426.34 Rupees Four Hundred Twenty Six and Thirty Four Paise Only 426.34

69 Providing and placing in position at terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes, etc., all complete as directed by Engineer-in-Charge. 2000.00 Per Litre 10.12 Rupees Ten and Twelve Paise Only 20240.00

70 Supplying, jointing, testing and commissioning, approved make GM body gate valves with C.I wheel and screwed ends, etc., all complete as directed by Engineer-in-Charge.

a) 25mm 1.00 Each 571.83 Rupees Five Hundred Seventy One and Eighty Three Paise Only 571.83

b) 50mm 1.00 Each 943.23 Rupees Nine Hundred Forty Three and Twenty Three Paise Only 943.23

71 Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85 gms fixed to the health faucet, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 144.16 Rupees One Hundred Forty Four and Sixteen Paise Only 288.32

72 Providing and fixing C.P. brass bib cock of 15mm nominal bore dia and approved quality conforming to IS:8931, etc., all complete as directed by the Engineer-in-Charge. 6.00 Each 465.62 Rupees Four Hundred Sixty Five and Sixty Two Paise Only 2793.72

73 Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1m spacing, necessary reducers, tank adaptors, etc., This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., all complete as per direction of Engineer-in-Charge.

a) 15mm dia 30.00 R m 457.35 Rupees Four Hundred Fifty Seven and Thirty Five Paise Only 13720.50

b) 20mm dia 40.00 R m 493.92 Rupees Four Hundred Ninety Three and Ninety Two Paise Only 19756.80

c) 25mm dia 40.00 R m 576.28 Rupees Five Hundred Seventy Six and Twenty Eight Paise Only 23051.20

d) 32 m dia 10.00 R m 679.23 Rupees Six Hundred Seventy Nine and Twenty Three Paise Only 6792.30

74 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, etc., all complete as per direction of Engineer-in-Charge.

a) 40mm dia 45.00 R m 517.30 Rupees Five Hundred Seventeen and Thirty Paise Only 23278.50

75 Supply and Making connection of drain pipes of 100 to 250mm diameter or sewer line with existing manhole including breaking/cutting into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with C.M 1:3 ( 1 cement : 3 caorse sand ), finished with a floating coat of neat cement and making necessary channels for the drain, etc., all complete as directed by the Engineer-in-Charge. 4.00 Each 744.58 Rupees Seven Hundred Forty Four and Fifty Eight Paise Only 2978.32

76 Constructing brick masonry manhole with Common burnt clay F.P.S in cement mortar 1:4 with R.C.C. top slab with 1:1.5:3 mix 20mm nominal size, foundation concrete 1:4:8 mix 40mm nominal size, inside plastering 12mm thick with cement mortar 1:3 finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size of [90 x 80]cm and 45cm deep including C.I. cover with frame (light duty) [455 X 610]mm internal diameter, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg), etc., all complete as per the directions of Engineer-in-Charge. 1.00 Each 11732.68 Rupees Eleven Thousand Seven Hundred Thirty Two and Sixty Eight Paise Only 11732.68

77 Constructing brick masonry chamber of inside dimensions [600 x 850]mm and 45cm deep for underground C.I. inspection chamber and bends with common burnt clay F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) [455 x 610]mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete, etc., complete as per standard design and directions of the Engineer-in-Charge. 1.00 Each 8814.62 Rupees Eight Thousand Eight Hundred Fourteen and Sixty Two Paise Only 8814.62

78 Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of 450mm diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap), etc., all complete as per the directions of Engineer-in-Charge . 1400.00 R m 2093.15 Rupees Two Thousand Ninety Three and Fifteen Paise Only 2930410.00

79 Providing, fabricating and fixing aluminium work for partitions, Curtain wall frames, ventilators (Min. thickness of powder coating 50 microns) made up of aluminium extruded sections, windows, etc., Ventilators: conforming to designaton 63400 of IS 1285 and of approved make, Sliding Window Frame: Top and side sections of the frames to accomodate the shutter section. d) Bottom section of the frame shall be with gutter and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, e) Shutters are to be provided with galss of approved size for two shutters and stainless steel fly proof mesh for one shutter fixed with good quality tapered aluminium interlocking screwless snap on type glazing clip not less than 0.90mm thick. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, Panelling, fly proof mesh will be paid seperately). 1187.00 Kgs 487.76 Rupees Four Hundred Eighty Seven and Seventy Six Paise Only 578971.12

80 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions, etc., With float glass panes of 5mm thickness (weight not less than 12.50 kg/Sq m) along with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge. 199.00 Sq m 1382.93 Rupees One Thousand Three Hundred Eighty Two and Ninety Three Paise Only 275203.07

81 Aluminium work for shutters of doors, windows i.e. Powder coated aluminium windows (minimum thickness of powder coating 50 micron) & ventilators in moving position including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required including necessary accessories, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge. 1167.00 Kgs 582.89 Rupees Five Hundred Eighty Two and Eighty Nine Paise Only 680232.63

82 Providing and fixing 12mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws, etc., complete as per architectural drawings and directions of Engineer-in-Charge. 44.00 Sq m 1024.76 Rupees One Thousand Twenty Four and Seventy Six Paise Only 45089.44

83 Providing and fixing mineral fibre false ceiling tiles With 16mm thick beveled tegular mineral fibre false ceiling tile at all heights of size [595 X 595]mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33mm thick (galvanized @120 gsm) comprising of main T runners of [15 x 32]mm of length 3000mm, cross T of size [15 x 32]mm of length 1200mm and secondary intermediate cross T of size [15 x 32]mm of length 600mm to form grid module of size [600 x 600]mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50mm long 8mm outer diameter M-6 dash fasteners, 6mm diameter fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size [85 x 25 x 2]mm, spaced at 1200mm centre to centre along main ‘T’. The system should rest on periphery walls / partitions with the help of GI perimeter wall angle of size [24 x 24 X 3000]mm made of 0.40mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-Charge. 59.00 Sq m 2143.95 Rupees Two Thousand One Hundred Forty Three and Ninety Five Paise Only 126493.05

84 Supplying and Fixing of Curvilinear Urinal Partitions Plates / wall made out of 8mm thick glass with frosting and fixed to the walls with SS fittings of size 900 H and 450mm W at requisite levels as per the manufacturers instruction including necessary screws, fittings and fixures, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 2838.99 Rupees Two Thousand Eight Hundred Thirty Eight and Ninety Nine Paise Only 5677.98

85 Supplying, laying, testing and commissioning the following dia PVC pipes of SWR grade and of approved make with rubber ring joints conforming to IS 5382, jointed together with solvent, in trenches and floors, including all necessary fittings & specials, bends, branches, sockets, pipe cutting and wastages, cutting and making good the floors, etc., all complete as directed by the Engineer-in-Charge

a) 75mm dia 15.00 R m 500.00 Rupees Five Hundred Only 7500.00

b) 110mm dia 15.00 R m 576.28 Rupees Five Hundred Seventy Six and Twenty Eight Paise Only 8644.20

86 Providing and fixing (Jaguar make) C.P liquid soap holder with dispenser of available size and standard shape with bracket of the same materials with snap fittings of approved quality and colour, including cutting and making good the walls, etc., all complete as directed by the Engineer-in-Charge. 3.00 Each 1186.45 Rupees One Thousand One Hundred Eighty Six and Forty Five Paise Only 3559.35

87 Providing and fixing (Jaguar make) C.P brass Angle cock with all necessary fittings along with washers, leak proof rubber gasket arrangement, etc., and packing with white cement, etc., all complete as directed by the Engineer-in-Charge. 6.00 Each 533.90 Rupees Five Hundred Thirty Three and Ninety Paise Only 3203.40

88 Supplying and fixing in position factory insulated sandwich panel for roofing and cladding minimum 80mm thick with facings made up of pre-painted galvalume, not less than 0.50mm thick (TCT) on top and 0.50mm thick on the bottom with 550 Mpa yield strength. The core material shall be made up of rigid polyisosyrene foam (PIF) conforming to IS 12436 and of density around 40 ± 2 kg/m³ fixed with self tapping screws incuding necessary supplementary fittings, butyl tape, joint fillers, joint laps, making provision for accessories, necessary cutouts/openings, supports for joinery as required etc.,along with the end caps and all exposed surfaces are protected with masking.80mm Thk core PIR and 120mm Thk overall thickness include crest, all complete as per manufacturer's specification and as directed by the Engineer-in-Charge. Note: (i) Refer detailed technical specifications. (ii) The quoted rate shall be inclusive of overlaps and wastages. (iii) A performance guarantee bond for 10 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 10 years from the date of completion of contract / project as a whole. 1700.00 Sq m 2280.00 Rupees Two Thousand Two Hundred Eighty Only 3876000.00

89 Supply & Laying of Truss less Roof with material Pre-painted Galvalume Coated Steel Sheets conforming to ASTM A792M / IS 15961 Grade ‘D’ / 350 MPa having Yield Strength min.Coating mass AZM 150 Base Metal Thickness ‘BMT’: 0.9 mm (+/-0.02mm), After Paint Thickness ‘APT”: 0.95mm (+/-0.02mm), Coil Width: 912mm (+/-2mm), Coating Type: RMP Coated, Paint top coat: 20-25 microns & under coat: 10-12 microns along with Hangers / Clamps, Consumables like Anchor Fasteners / SDS, Washers, Epoxy Paint Lacquer, etc., all complete as directed by the Engineer-in-Charge. 396.00 Sq m 1690.00 Rupees One Thousand Six Hundred Ninety Only 669240.00

90 Providing and fixing bright finished brass handles of 200mm size with screws, etc, all complete as directed by the Engineer-in-Charge. 4.00 Each 847.46 Rupees Eight Hundred Forty Seven and Forty Six Paise Only 3389.84

91 Supplying, fixing, testing and commissioning of horizontal Lifeline system designed to provide safe access to roof area. The system shall have 8mm SS 316 two line wire system with zinc plated and e-coated steel brackets, detachable travellers, posts and base plates that provide flexible, continuous protection for multiple users working at height. The system shall incorporate an inline shock absorber that minimises loads applied to both the user and the building in the event of a fall. The rate is inclusive of necessary fittings / fixtures like base plates, start & end posts, intermediate & corner posts, Energy absorbers, tensioner assembly, end assembly, intermediate brackets, extended intermediate bracket for gutter and ridge connections, corner bracket, tensioner cable extrimity, cable Extrimity, Extrimity ring, Horizontal Skater, Anchor Post, kernamental Rope, Rope grab fall arrestor, Karabiner, Full Body Harness, aluminium rivets with specially designed EPDM washer to ensure water tightness, water proofing sealant tape, PPE - body harness and 2m dual lanyard, etc., all complete as per manufacturer's specifications and as directed by the Engineer-in-Charge. Note :The quoted rate shall be for the entire work and nothing extra shall be paid on this account. 190.00 R m 1313.56 Rupees One Thousand Three Hundred Thirteen and Fifty Six Paise Only 249576.40

92 Supplying and fixing Motorized G.I. rolling shutter, made of approximate size [5 X 5]m and approved make. The curtain shall be constructed from Tata Bluescope / JSW 150 gsm single skinned galvalume steel laths with natural finish of min. 1.25mm thickness and interlocking distance of minimum 75mm. Side guides shall be made of min. 2 or 3.15mm thick heavy duty TG Galvanised steel, as per the site requirement, along with necessary fixtures like cleats (spacing shall not exceed 0.75m) or supports brackets for attachments to the walls or column by screws or bolts and necessary seals.The size of the guide channels shall be conforming to Is:6248-1979. Single piece G.I. Heavy duty mild steel suspension shaft along with roller of sufficient diameter with springs shall be provided along with necessary hexagonal bracket plate of min 3.15mm thickness, size conforming to Is:6248-1979 and square bar, if necessary. The provision of Pressed galvalume steel hood cover with reinforced bracket as required to suit the shutter width and motor cover with natural finish of minimum 0.90mm thick and of reuired shape along with necessary fixtures and stiffeners like angle cleats, angle or flat stiffeners,etc shall be provided. Bottom profile shall be of G.I. plate with angle stiffner. The bottom rail shall be fixed with extruded rubber bottom seal that shall seal against the floor when the door is fully closed. The CE Certified CRS Compact Gear motorised system shall be indirect drive type along with system power supply wired with industrial plug and three station push button / switch with deadman control and arrangements for inside and outside locking. A provision of suitable safety devices/system like inbuilt limit switches, External safety brake's, Control switch, etc., are to be provided in accordance with EN 14121-1:2007 Safety of machinery. 80.00 Sq m 9407.35 Rupees Nine Thousand Four Hundred Seven and Thirty Five Paise Only 752588.00

Provision shall be made for manual operation by hand chain in emergency condition, etc., all complete & fully operational. The rate is inclusive of two coats of painting, of approved shade and manufacture, over a coat of grey epoxy primer by spray including preparation of surface, all materials, labour, machinery, tools and tackels, etc., all complete as directed by the Engineer-in-Charge. Note: (i) Clear opening shall be measured for payment. (ii) The quoted rate shall be for the entire work and making it operational..

Sub-Total of Part 'I' - Civil Works (Excluding GST) Rupees Seven Crore Twenty Nine Lakh Thirty Seven Thousand Seven Hundred Eighty Eight and Forty Nine Paise Only 72937788.50

Part 'II' - Electrical Works

LED Light fixtures

1 Supply, fixing to existing MS perlins at approx. 8.5 mtr height(Approx.), including using suitable MS angle frame work with required fixing hardwares etc., as per site requirement, testing & commissioning of industrial type highbay LED lighting fixture of wattage not exceeding 120 watts made out of high pressure diecast aluminium housing, diffuser made of high grade toughened glass, integral control gear, eye hook etc., (as per OEM standards). The technical parameters of lighting fixtures are as below: The luminaire should have Lumen efficacy ≥ minimum 140lm/watt and lumen output not less than 16800lumens, PF>0.90 and Colour temperature shall be ≥5700K, CRI≥70, THD <10%, IP66/65 operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V with standard accessories complete in all respects and as directed by Engineer in-charge. The fitting shall be of Crompton model no:CIP-327-120-57-60D-HL2-LM-NSG/ Equivalent model in other approved makes. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminaries & LM80 certificate for LED shall be produced. 31.00 Nos 18827.97 Rupees Eighteen Thousand Eight Hundred Twenty Seven and Ninety Seven Paise Only 583667.07

2 Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaries. Other standard accessories including necessary inter-connections and supply of 1 No of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-charge. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.1XT8+LT8-20-865/Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge. 11.00 Nos 1150.00 Rupees One Thousand One Hundred Fifty Only 12650.00

3 Supply & fixing on the building at a height of 5-8mtr approx. including supply and fixing GI pipe bracket made out of 40mm dia class B GI pipe of 1.5Mtrs long bent to shape with necessary fixing hardwares etc., to fix on building and testing & commissioning of building light LED light fixture of wattage not exceeding 45 watts and Efficacy > 110/120 lm/W with 10KV SPD with necessary interconnections consisting of pressure die cast aluminium housing, optical cover made out of heat resistance toughened clear glass / polycarbonate with IP66, luminous, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5600K+400K, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-change. The luminaries shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.95. LM 79 certification for luminaries & LM80 certificate for LED shall be produced. Any approved make fitting meeting the above technical specification has to be supplied.The LED Light fixture shall be of Crompton model no:CRP-409-45-57-SL-GL-NSG /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaries should be one of approved make as per approved make list of HAL complete in all respect and as directed by Engineer-in-charge. 16.00 Nos 4558.47 Rupees Four Thousand Five Hundred Fifty Eight and Forty Seven Paise Only 72935.52

4 Supply, fixing on ceiling including suitable fixing hardwares, testing & commissioning of surface mounting type square LED lighting fixture of wattage not exceeding 36watt made out of white powder coated CRCA housing/ aluminium housing, front frame with translucent /polycarbonate cover including control gear. The luminaire should have Lumen efficacy ≥100 lm/watt and lumen output not less than 3600lumens with PF >0.9 and Colour temperature shall be >5700K operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections and other standard accessories complete in all respects and as directed by Engineer in charge. LM79 certification for luminaires & LM80 certificate for LED shall be produced. The LED Light fixture shall be of Crompton model no:LCTLSNE-36-FO-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 8.00 Nos 5193.22 Rupees Five Thousand One Hundred Ninety Three and Twenty Two Paise Only 41545.76

5 Supply, fixing directly to the ceiling/wall using suitable mounting arrangements testing & commissioning of surface mounting Decorative type 10W LED mirror light fitting, including driver, the driver shall have PF >0.9 and Colour temperature shall be ≥5700K, THD <20% operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections complete in all respect and as directed by EIC. The lighting fixture shall be Bajaj make Model-BCLSB 10W WH/Equivalent make in other approved makes. 3.00 Nos 547.46 Rupees Five Hundred Forty Seven and Forty Six Paise Only 1642.38

6 Supply & fixing on existing MS hook 1200mm sweep, Five star rated with brushless direct current motor(BLDC) Ceiling fans complete with blades, down rods, and accessories, 230V single phase 50Hz AC supply. Minimum air delivery 210cu.m/min with service value 6.00 BEE, erected in position with necessary flexible copper leads of required colour and with canopy, down rod 300mm to 600mm length as per site requirement, necessary rubber bushings, clamps nuts,bolts etc., complete in all respects and as directed by Engineer-in-charge. 4.00 Nos 2642.57 Rupees Two Thousand Six Hundred Forty Two and Fifty Seven Paise Only 10570.28

7 Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge. 3.00 Nos 4731.36 Rupees Four Thousand Seven Hundred Thirty One and Thirty Six Paise Only 14194.08

8 Supply, installation, testing & commissioning of 450mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge. 14.00 Nos 6927.97 Rupees Six Thousand Nine Hundred Twenty Seven and Ninety Seven Paise Only 96991.58

9 Supply, fixing, testing & commissioning of the following factory built powder coated Double door Horizontal type three pole and neutral MCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:

a) 6 way (4 + 18), Double door Horizontal MCB DB 2.00 Nos 4814.70 Rupees Four Thousand Eight Hundred Fourteen and Seventy Paise Only 9629.40

b) 4way ( 4 + 12), Double door Horizontal MCB DB 5.00 Nos 3959.97 Rupees Three Thousand Nine Hundred Fifty Nine and Ninety Seven Paise Only 19799.85

c) 63 amps. ratings, 4P MCB, "C" curve, 10 KA breaking capacity. 2.00 Nos 1000.88 Rupees One Thousand and Eighty Eight Paise Only 2001.76

d) 40 amps. ratings, 4P MCB, "C" curve, 10 KA breaking capacity. 11.00 Nos 938.93 Rupees Nine Hundred Thirty Eight and Ninety Three Paise Only 10328.23

e) 6-32 amps. ratings, SP MCB, "C" curve, 10 KA breaking capacity. 72.00 Nos 247.80 Rupees Two Hundred Forty Seven and Eighty Paise Only 17841.60

10 Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 A "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 6.00 Nos 3975.47 Rupees Three Thousand Nine Hundred Seventy Five and Forty Seven Paise Only 23852.82

11 Supply, fixing on wall/grouted to the floor 600mm above floor level, using suitable angle iron frame work, testing and commissioning of the 63A, 415V Gr, TPN powder coated, Switch disconnector fuse unit with equal rating DIN type HRC fuses, front operating handle,ON and OFF indication using LED module etc., enclosed in sheet steel enclosure, including suitable cable end box(incoming/outgoing) wherever necessary complete in all respects and as directed by Engineer-in-charge. 1.00 No 3043.31 Rupees Three Thousand Forty Three and Thirty One Paise Only 3043.31

12 Design, fabrication,Supply, erection, testing & commissioning of Outdoor Type LT Panel -1 (PTTA) 1.00 Set 89917.40 Rupees Eighty Nine Thousand Nine Hundred Seventeen and Forty Paise Only 89917.40

Design, fabrication, supply, installation, testing and commissioning of cubicle type Indoor LT Panel with front lockable door arrangement, suitable to be mounted on the existing brick pedestal/cable duct using M.S channel frame work, with cable entry from bottom/top with removable gland plates with required knock-outs, panel fabricated out of CRCA sheet steel folded and braced as necessary to provide a rigid support for all components, totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-54, multi-tier cubicle type formation with front hinged lockable doors for the individual feeders/ compartments, preparation of surface and treatment by seven tank process, powder coated with approved colour for not less than 50 microns and all doors and covers shall be fully gasketed using good quality EPDM gasket and/or rubber strips and ensure good lockable, durable door opening & closing mechanism, suitable meshed ventilator louvers with suitable cover,canopy type covering and Aluminium bus bars for three phases and neutral, bus bar insulators, heat shrinkable PVC sleeves etc., with necessary interconnections as specified in Technical specifications for electrical & mechanical works, comprising of following switchgear and accessories complete in all respects and as directed by Engineer-in-charge.

Note:-1) Current density shall not exceed 0.8A/sq.mm for Aluminium bus bars in LT Panel

2)All MCCBs in the LT panels shall be adjustable with thermal settings(80% to 100%), overload and short circuit releases including door interlocking device, front operating handle complete,ON and OFF indication of LED module etc. complete in all respects.

2)The operating height of the Panel shall not exceed 2.1 mtr. from FFL.

i) 1-no 250A 415V gr 4P 36KA MCCB TM Based

ii) Lot - 300A, 4P, 415V, short circuit rated 36KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

iii) 1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

iv) 1 Set-250/5A current transformers of suitable class and VA burden for metering.

v) 1no-(0-500V)range digital type Voltmeter with a push button option for selecting the phases.

vi) 1Set - RYB indicating lamps of LED module with 6A, 230V, 10KA, SP MCB.

vii) 1Set- 6A, 230V, 10KA, SP MCB for the protection of measuring instruments.

i) 1 No - 125A 415V gr. 25KA TP+NL MCCB,TM based

ii) 6Nos- 40A 415V gr. TPN 10KA MCB.

iii) 3Nos-63A 415V gr. TPN 10KA MCB.

Lighting Point wiring

13 Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)

a) Wiring to single light/fan point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 12.00 Pts 1420.02 Rupees One Thousand Four Hundred Twenty and Two Paise Only 17040.24

b) Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 4.00 Pts 2250.53 Rupees Two Thousand Two Hundred Fifty and Fifty Three Paise Only 9002.12

c) Wiring to exhaust fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects. 7.00 Pts 1420.02 Rupees One Thousand Four Hundred Twenty and Two Paise Only 9940.14

14 Supplying and fixing following suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 3 pin 5/6A modular socket outlet and 5/6 A modular switch, connections etc., as required.modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 10.00 Nos 461.73 Rupees Four Hundred Sixty One and Seventy Three Paise Only 4617.30

15 Supplying and fixing following suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required. 6.00 Nos 567.23 Rupees Five Hundred Sixty Seven and Twenty Three Paise Only 3403.38

16 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 100.00 Mtrs 266.19 Rupees Two Hundred Sixty Six and Nineteen Paise Only 26619.00

b) 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 100.00 Mtrs 323.30 Rupees Three Hundred Twenty Three and Thirty Paise Only 32330.00

a) Supply, Fixing, in flush with wall/on wall as per site condition, suitable size modular GI box/PVC box with base plate, glossy front cover for supply and housing of 1 No. of RJ-11 telephone socket outlets with shutter including supply of suitable size modular type GI concealed/open PVC mounting box with base plates, front covers, etc., with necessary interconnections and chipping the wall, replastering to smooth finish etc., wherever required complete as directed by Engineer-in-charge. 2.00 Nos 143.25 Rupees One Hundred Forty Three and Twenty Five Paise Only 286.50

b) Supply & drawing of 0.5 mm dia copper conductor PVC insulated 4 pair colour coded and twisted unarmoured telecommunication cables in the existing PVC conduit as per standard practice including necessary inter connections & end terminations. 50.00 Mtrs 52.26 Rupees Fifty Two and Twenty Six Paise Only 2613.00

18 Supply & fixing in flush with existing work station cubical(Modular Table) wire ways cutouts/PVC race ways/Aluminium partition, testing & Commissioning of 2 no's 1 Module RJ-45 socket in Module plate for Two number of Data point including supply base plates, front covers, etc., with necessary interconnections complete as directed by Engineer-in-charge. 8.00 Nos 1361.86 Rupees One Thousand Three Hundred Sixty One and Eighty Six Paise Only 10894.88

19 Supply and drawing in the existing PVC conduits / wall / above false ceiling, Cat 6 UTP 4-Pair cable including necessary interconnections complete for LAN & Internet point as directed by Engineer-in-charge. 200.00 Mtrs 55.18 Rupees Fifty Five and Eighteen Paise Only 11036.00

20 Supplying and fixing following size modules, GI box alongwith Modular base & cover plate for modular switches in recess etc. as required.

a) 1 or 2 Module 10.00 Nos 288.45 Rupees Two Hundred Eighty Eight and Forty Five Paise Only 2884.50

21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

a) 20MM PVC Conduit 100.00 Mtrs 123.90 Rupees One Hundred Twenty Three and Ninety Paise Only 12390.00

22 TIMER PANEL 2.00 Set 24819.49 Rupees Twenty Four Thousand Eight Hundred Nineteen and Forty Nine Paise Only 49638.98

Supply, installation, testing and commissioning of Outdoor weather proof 2rows 24 module module distribution board of Hensel Cat. No.KV 9224 M or equivalent in Legrand/ Hager/ Schneider make including suitable locking facility by means of built in lock with profile cylinder with set of Key's and with suitable size cover, cable entry on one side. The DB shall be mounted at suitable height on the wall using suitable size MS angle/channel frame work with painting as per EIC, with cable entry knock-outs, including rigid support for all components, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 with necessary interconnections between incoming and outgoing MCB's, contactor and timer using suitable size flexible copper wires and comprising of following switchgear and accessories complete in all respects and as directed by Engineer-in-charge.

a) 1No- 32A 415V gr.10KA FP MCB with overload and short circuit protection.

b) 1No-25A, ML1.5 contactor of L&T Cat.No.SS91851 with contactor coil suitable for 230V Single phase supply.

c) 1No- Modular digital time switch for street light & Building light control of Legrand Alpha Rex 3 D21 or equivalent approved make with one channel daily cycle unit suitable for daily programming to switch ON & OFF and operate on 230V single phase supply.

d) 4Nos, 6-32A, 230V Gr, 10KA SP MCB with overload and short-circuit protection.

23 Supply and fixing of weather proof cable junction box with terminals of minimum size 155 mm x 210 mm x 92 mm Hensel Cat. No. DK 1616 G or equivalent in Legrand/ Schneider/ Hagar make only. The Box shall be mounted at suitable height on the pole using suitable size MS angle frame work with painting as per EIC, with cable entry knock-outs, including rigid support for all components, Din channel, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 complete in all respects and as directed by Engineer-in-charge. 47.00 Nos 1156.78 Rupees One Thousand One Hundred Fifty Six and Seventy Eight Paise Only 54368.66

24 Supply, laying, testing & commissioning of following size LT armoured power cable

Supply & laying in the already excavated cable trench/cable tray/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of following size XLPE insulated Aluminium (Al) /Copper (cu) conductor 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment earthed Armoured (Arm)U.G cables and as per technical specification including stacking at site, proper storage complete etc. as required. (Note:- Excavation, sand & Brick Protection, concrete cutting, reconcreting, casing pipes will be measured separately.)

a) 3.5 CX 185 Sqmm Aluminium armoured conductor. 200.00 Mtrs 1035.56 Rupees One Thousand Thirty Five and Fifty Six Paise Only 207112.00

b) 3.5CX 25 Sqmm Aluminium armoured conductor 200.00 Mtrs 210.15 Rupees Two Hundred Ten and Fifteen Paise Only 42030.00

c) 3CX 2.5 Sqmm Copper armoured conductor 1000.00 Mtrs 169.47 Rupees One Hundred Sixty Nine and Forty Seven Paise Only 169470.00

25 Supply,testing & commissioning of 4C X 16 Sqmm Aluminium armoured conductor XLPE insulated , 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment earthed Armoured (Arm)U.G cables 4C X 16 Sqmm Aluminium armoured conductor. 600.00 Mtrs 155.93 Rupees One Hundred Fifty Five and Ninety Three Paise Only 93558.00

26 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of 4C X 16 Sqmm Aluminium armoured conductor in the existing masonnry open duct as required 150.00 Mtrs 27.10 Rupees Twenty Seven and Ten Paise Only 4065.00

27 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

a) 3.5 CX 185 Sqmm Al Arm LT Cable End Joint 2.00 Nos 846.97 Rupees Eight Hundred Forty Six and Ninety Seven Paise Only 1693.94

b) 3.5C x 25 Sqmm.Al Arm LT cable. 8.00 Nos 302.97 Rupees Three Hundred Two and Ninety Seven Paise Only 2423.76

c) 4C x 16 Sqmm.Al Arm LT cable. 22.00 Nos 299.10 Rupees Two Hundred Ninety Nine and Ten Paise Only 6580.20

d) 3CX 2.5 Sqmm Copper armoured conductor 100.00 Nos 320.00 Rupees Three Hundred Twenty Only 32000.00

28 Carrying out Mechanized Horizontal directional drilling of soil under the existing road/gate way for laying 1 run of HDPE pipe including supply and laying 1 run of 125 mm dia PE100 PN08 HDPE pipes, any ISI approved make conforming to IS 4984:1995 including suitable jointing using welding as required, providing pull tapes in the laid HDPE pipe, ends brought out, the brought out ends shall be sealed with suitable material to prevent soil and water entry and buried under soil. A cement concrete route marker shall be grouted in the soil above both the end of pipes with mark "End of pipes 1Rx125mm"complete as directed by Engineer in charge. 50.00 Mtrs 800.00 Rupees Eight Hundred Only 40000.00

29 Supplying and installing of perforated 225 mm Width X 50 mm Depth X 1.6 mm Thickness Hot dip galvanised Iron cable tray (Galvanisation thickness not less that 50 micron)with perforation not more than 17.5% in convenient sections,joined with connectors,suspended from ceiling with G.I suspenders including GI bolts & nuts etc.as required. 80.00 Mtrs 866.33 Rupees Eight Hundred Sixty Six and Thirty Three Paise Only 69306.40

a) Supply & providing GI earth stations using 600 x 600x 6.3 mm thick G.I plate electrode at 2.5 mtr. below the ground level with 20mm dia class B G.I pipe for watering, G.I funnel etc. & Cement concrete base of minimum size 750x750x100mm thick shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc. and providing cement concrete chamber of inside dimension 300x300x300mm with a wall thickness of 120mm using 1:2:6 CC above the base concrete including providing 50mm thick RCC cover including required salt & charcoal, 2 runs of 50x6 mm G.I strip from plate electrode upto top of the chamber etc. as per technical specification enclosed with the tender & as per IS 3043 complete in all respects. 4.00 Nos 7232.69 Rupees Seven Thousand Two Hundred Thirty Two and Sixty Nine Paise Only 28930.76

b) Supplying & laying 25 mm X 5 mm GI strip at 0.50 meter below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm) 60.00 Mtrs 139.39 Rupees One Hundred Thirty Nine and Thirty Nine Paise Only 8363.40

c) Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 80.00 Mtrs 40.65 Rupees Forty and Sixty Five Paise Only 3252.00

31 Excavation in all types of soil for Cable trench including refilling, consolidating of soil after laying the cable including ramming and levelling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge. 10.00 Cu. Mtrs 498.80 Rupees Four Hundred Ninety Eight and Eighty Paise Only 4988.00

32 Demolishing Cement Concrete manually/mechanical means including disposal of material within 50 meters lead as per direction of Engineer in charge

a) Nominal Concrete 1:3:6 or richer mix (including equivalent design mix) 2.00 Cu. Mtrs 2356.29 Rupees Two Thousand Three Hundred Fifty Six and Twenty Nine Paise Only 4712.58

33 Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing,and reinforcement-All work up to plinth level:

a) 1:2:4 (1 cementy: 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 2.00 Cu. Mtrs 8308.50 Rupees Eight Thousand Three Hundred Eight and Fifty Paise Only 16617.00

34 Supply & fixing on the top of the building 3 pronged lightning conductor finials fixed on 20 mm dia copper tube 2 mtrs. long with gun metal 150 mm dia. Base & fixing arrangements for the down conductors/GI strip.Complete in all respect 1.00 No 7500.00 Rupees Seven Thousand Five Hundred Only 7500.00

Sub-Total of Part 'II' - Electrical Works (Excluding GST) Rupees Twenty Lakh Two Hundred Seventy Eight and Seventy Eight Paise Only 2000278.78

Part 'III' - Fire Alarm System

35 FIRE DETECTION AND ALARM SYSTEM

a) Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the Two loop Panel/modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history login the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. Including supply, installation and connectivity of Auto dialer with addressable control module main control panel with minimum 10 telephone nos. connectivity. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. 1.00 No 231563.26 Rupees Two Lakh Thirty One Thousand Five Hundred Sixty Three and Twenty Six Paise Only 231563.26

b) Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be UL / FM / Vds approved. 4.00 Nos 2766.47 Rupees Two Thousand Seven Hundred Sixty Six and Forty Seven Paise Only 11065.88

c) Supply and installation of PVC type response indicators with LED indications for above false ceiling detectors and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be UL / FM / Vds approved. 2.00 Nos 267.16 Rupees Two Hundred Sixty Seven and Sixteen Paise Only 534.32

d) Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) of suitable range(min 45mtr) required for the dome/simulator are complete with emitter and receiver including connections with remote test features etc., complete as required. 6.00 Nos 72536.97 Rupees Seventy Two Thousand Five Hundred Thirty Six and Ninety Seven Paise Only 435221.82

e) Supplying, installation, testing & commissioning of addressable manual call point complete as required and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be UL / FM / Vds approved. 4.00 Nos 3747.03 Rupees Three Thousand Seven Hundred Forty Seven and Three Paise Only 14988.12

f) Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be UL / FM / Vds approved.. 4.00 Nos 3393.71 Rupees Three Thousand Three Hundred Ninety Three and Seventy One Paise Only 13574.84

36 Supply, installation, integrating with the existing main FACP, testing & Commissioning of Auto dialer with addressable control module connected to main control panel with minimum 10 telephone nos. connectivity working on 24volts supply including connected cabling/wiring complete in all respects, as per technical specification. 1.00 No 8916.35 Rupees Eight Thousand Nine Hundred Sixteen and Thirty Five Paise Only 8916.35

37 Supply, laying and fixing directly to the ceiling/on wall / above false ceiling/cable duct/truss etc, testing & commissioning of 2 Core X1.5 sqmm copper XLPE insulated FRLS with ISI mark armoured RED colour LT cable along with required accessories, terminations glands, as directed by EIC to complete the installation as per the technical specification. 500.00 Mtrs 97.68 Rupees Ninety Seven and Sixty Eight Paise Only 48840.00

Sub-Total of Part 'III' - Fire Alarm System (Excluding GST) Rupees Seven Lakh Sixty Four Thousand Seven Hundred Four and Fifty Nine Paise Only 764704.59

Part 'IV' - Solar Power System

1 Design, Supply, Installation, Testing & Commissioning of 100 kWp Solar Photovoltaic On Grid Rooftop System at Aircraft material store ARDC Division. 1.00 Set 3975000.00 Rupees Thirty Nine Lakh Seventy Five Thousand Only 3975000.00

a) Supply, Fixing, Testing & Commissioning of 100 KWp Grid Tied Solar Rooftop Power Plant consists of Solar Photo Voltaic array, power conditioning unit(PCU)/Inverter, consisting of Maximum Power Point Tracker (MPPT), inverter, controls, protections and switches. PV Array is mounted on suitable structure. Grid tied SPV system is without battery and should be designed with necessary features to supplement the grid power during day time. Components and parts used in the SPV power plants including the PV modules, metallic structures, interconnecting cables, junction box, switches, PCU's, earthing etc., complete in all respects and as detailed as below:-

b) Supply, installation, testing and commissioning of Solar PhotoVoltaic modules of minimum 535Wp or above rating consisting with 144 half-cut cells configuration, with MONO crystalline silicon solar cells meeting IEC 61215 (revised) / IS 14286 / IEC 61646 standards. PV modules must qualify to IS/IEC61701 also PV modules used must qualify to the latest edition of IEC PV module qualification test or equivalent BIS standards. In addition, the modules must confirm to IEC 61730-1 & IEC 61730-2 with minimum efficiency of 20% with all accessories as per the tender specification, module shall have positive tolerance of 0 to 4% and negative temperature coefficient of power for the modules shall be less than or equal to 0.45% per deg. C.

c) Supply, fabrication, erection of Non Penetrating type Aluminium Clamps with adhesive type shall be used for the Galvalume Sheet Roof Area as per site requirement.

d) Supply, Installation, Testing and Commissioning of Grid Tied solar string inverter of 100kVA rating or 2Nos of 50KVA inverters, which will give a total capacity of 100KVA to achieve the desired capacity, IP 65 rated, outdoor, and IP 20 for indoor unit the output should be three Phase 415V, 50Hz, true sinewave inverter system, with Maximum Power Point Tracker charge controller. Inverter should have Minimum 3 MPPTs, with 2 strings per MPPT. Minimum protection required shall be over voltage/surge, over load, short circuit and anti- islanding protection. Earthing shall be provided as per IEC standards. IGBT / MOSFET switching and microprocessor / DSP type controller with true sine wave output. Unity Power factor(100kVA=100kW). Accuracy of AC voltage control = +/-3%. Accuracy of AC frequency control = +/-1%. Frequency = 50Hz. Intelligent interface with LED/LCD display(Bluetooth/Wifi interface is also acceptable). Total Harmonic Distortion <3%, the minimum inverter efficiency should be >95% and P.F of >0.9. The inverter should have all specification, protections, operational modes, etc as detailed in technical specification. The inverter should have in-built Type Surge protection device on AC and DC side.The item includes all necessary accessories like supports, canopy etc,.

e) Supply, fabrication, fixing & grouting of MS angle frame work/Mounting stand with Canopy arrangement for the Inverter erection.

f) Supply & laying/drawing of following DC Cables.

g) Supply, laying, testing and commissioning of Cables of appropriate sizes shall meet IEC 60227/IS 694, IEC 60502/IS1554 standards, voltage rating of 660/1100V cables from Modules to String Combiner / Monitoring Box/inverter, UV Protected Cable. Scope includes suitable size PVC pipe for cable protection. The item includes all necessary accessories clamp, ties etc as required complete as per technical specification.

h) Design,Supply, fabricating, installing of 300x50x2mm or suitable size perforated GI cable Trays with and with out cover including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures including suitable size M.S. angle supports and necessary fixing hardware as required and as per site requirements.

i) Supply and fixing/connecting of MC4 Connector suitable for 1C 4 Sqmm DC Cable at String side

k) Supply and fixing/connecting of MC4 Connector suitable for 1C 4 Sqmm DC Cable at Inverter Input side

l) Supply and fixing of Lightning arrestors(LA) spike.

Supply & providing GI earth stations using 600 x 600x 6.3 mm thick G.I plate electrode at 2.5 mtr. below the ground level with 20mm dia class B G.I pipe for watering, G.I funnel etc. & Cement concrete base of minimum size 750x750x100mm thick shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc. and providing cement concrete chamber of inside dimension 300x300x300mm with a wall thickness of 120mm using 1:2:6 CC above the base concrete including providing 50mm thick RCC cover including required salt & charcoal, 2 runs of 50x6 mm G.I strip from plate electrode upto top of the chamber etc. as per technical specification enclosed with the tender & as per IS 3043 complete in all respects.

n) Supply, fixing & connecting the 25x3mm(75 sqmm) size G.I strip on wall / clamping to the existing duct wall / fixing on cable tray/ laying 2 ft. below the ground level including concrete cutting, reconcreting, excavation, refilling, consolidation & levelling of soil after laying for interconnection between the earth pits & panels, DB's as directed by Engineer-in-charge.

o) Supply and fixing on the wall/tray 4 Sqmm copper un armoured cable complete with necessary interconnections using suitable lugs, bolts & nuts to effect proper earth continuity as per standard practice.

p) Remote monitoring system with WMS for Data Accusation

q) Supply, Erection,testing & commissioning of DATA Monitoring System with Display monitor as per IEC standard.

s) Supply, installation, testing and commissioning of AC Distribution panel board suitable for 415V, 50 Hz, outdoor type with IP55, metal clad, totally enclosed, rigid, floor or wall mounted, air insulated cubical type. Class I+II surge Protective Device with CT & Multifunction Meter, incoming MCCB & Outgoing MCCB. DCDBs, cabling from AC Isolation boxes to inverter,array junction boxes etc.

t) All other accessories for complete functioning of solar PV power plant.

Sub-Total of Part 'IV' - Solar Power System (Excluding GST) Rupees Thirty Nine Lakh Seventy Five Thousand Only 3975000.00

Part 'V' - Crane Work

1 Design, Manufacturing, transport, Erection, Testing and Commissioning of 5 Ton capacity box type double girder, E.O.T crane with a span of 24.8mtrs (approx), lift height of 5.5 mtrs, bay length 44.8mtr complete in all respect and comprising of Crab hoist, electrical controls, cabling as per standard practice,technical specification and other required accessories. 1.00 Set 3143750.00 Rupees Thirty One Lakh Forty Three Thousand Seven Hundred Fifty Only 3143750.00

2 Supply, Fixing, Testing and Commissioning of shrouded bus bar 125A- 4 row GI DSL system for above crane with all required accessories and technical specifications complete in all respects, to a bay length of 44.8mtrs(Approx). 44.80 Mtrs 2455.00 Rupees Two Thousand Four Hundred Fifty Five Only 109984.00

3 Supply, Erection and commissioning of 50 MM bright Square bar for above crane with all necessary accessories and technical specification complete in all respect. 89.60 Mtrs 3125.00 Rupees Three Thousand One Hundred Twenty Five Only 280000.00

Sub-Total of Part 'V' - Crane Work (Excluding GST) Rupees Thirty Five Lakh Thirty Three Thousand Seven Hundred Thirty Four Only 3533734.00

Sub-Total of Part 'II + III + IV + V' - Electrical Works (Excluding GST) Rupees One Crore Two Lakh Seventy Three Thousand Seven Hundred Seventeen and Thirty Seven Paise Only 10273717.37

Total of Part 'I' + 'II + III + IV + V' (Excluding GST) Rupees Eight Crore Thirty Two Lakh Eleven Thousand Five Hundred Five and Eighty Six Paise Only 83211505.87

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 83211505.87 BELOW % 83211505.87

Add 18% GST Rupees One Crore Forty Nine Lakh Seventy Eight Thousand Seventy One and Five Paise Only 14978071.06

Grand Total (Including GST) Rupees Nine Crore Eighty One Lakh Eighty Nine Thousand Five Hundred Seventy Six and Ninety Two Paise Only 98189576.92

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/C-154A/24-25

Name of Work: Construction of Proposed Storage Yard Buildings for Project / Raw Materials at ARDC Division, HAL [DC].

Estimated Amount in Lakhs.: 981.9

Tender Notice Date:(DD/MM/YYYY) 24.07.2025 Can we give in DD/MM/YYYY

Completion Period(In months) 15

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3 Kindly mention at Col I J &K as " Any Other related Information"

Sl.No Description Details Enclosed / Not Enclosed Any Other Related Information Remarks

1 Name of the Individual / Firm / Company: * Mandatory Pls enter name

2 Type of ownership Related Document to be Uploaded to eProcurement Portal

3 Year of Estblishment of Company/Business

4 If Other, please specify

5 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., If not enclosed reasons be to recorded here

6 Address for correspondence:

8 PAN no and Name of Holder

9 PF number (If any)

11 (a) Service Tax Registration No

11 (b) Goods and Service Tax ID No.

12 Contact details

Contact person name Pls

Ph. No. with STD code

FAX No. with STD code 5 6

13 Registered Contractor

If Registered Contractor with HAL Yes/ No Pls Enter Related Document to be Uploaded to eProcurement Portal * Category: A = Above 25 Crores B = 15Crore to 25 Crores C = 5Crore to 15 Crores D = 1 Crore to 5 Crores E = Lessthan 100 Lakhs to 75 Lakhs F = 75 Lakhs to 50 Lakhs 0 7 .A1 1

Name of Organisation 199999 7 A 2

Category and Registration No. 200000 6 B 3

PEMD Amount ( If paid ) 499999 6 C 4

not required Need to Fill Column 19 no comparision 500000 5 D 5

14 I.T Returns for past 03 years 999999 5 E 6

2024-25 Pls Select 'Yes','No' for IT Returns for all the 3 years 2499999 4

15 Maximum value of works excuted during the followinf 5 years. . (In Lakhs)

2019 - 2020 Pls enter Finiancial Turnover in Rupees for all the years NOTE: The value of max work to be supported with the details of Works executed for each year including name of the organisation with period of execution. Here last 3 years cells to be considered to Check Annual Turn Over for 30 % value of Estimation given above 1 6.00 7.00 0 0

Avg Annual Turnover criteria is not met

16 DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : PROVISION for 10 works are given. If more, a separate similar sheet to be made showing all the works with all details as per this FORMAT and same to Uploaded. However, 9 works details to be provided and balance work value of other works to be added and to be provided in 10th row as OTHER works.

Sl.No(work No) Name of Organization with address Name of the work on hand Amount of Contract Rs (in Lakhs) Period of CONTRACT in months Date of Commencement of work as Work Order in dd/mm/yyyy Probable date of Completion as Agreed Actual progress achieved till date of Tender Notification Rs (in Lakhs) Balance value of work on hand [Col.(3)-Col.(7)] Rs (in Lakhs) Remarks If Any 0.00

8 0.00 Max Turn Over 07-08 8500000

9 0.00 Current Level to be brought by adding 10% for every year 10-11 8500000 X 1.1 X 1.1 X 1.1

10 0.00 Turn Over to considered A 11313500

0.00 Balance Work On Hand 207452000

Bid Capacity 0.00 Bid Capacity Criteria is not Met this shouldf be hidden while uploading

17 Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)] Bid Capacity (2 X A X N) - B

Related Document to be Uploaded -162198000

18 Quantity of work Excuted during the last three years

Earthwork [in Cum]

Concrete work [in Cum]

Reinforcement steel [in MT]

Any other quantity of items tenderer would like to mention

19 Bank(s) details: [Copy of the cheque leaf to be uploaded]

19a Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

19b Bank Statement for past three month

19c Latest Over draft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

20 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice. SOLVENCY solvency cal

Name of Bank & Branch Pls Related Document to be Uploaded to eProcurement Portal 24.07.2025 1-Jul 0 40000

Date of Issue(dd-mm-yyyy) #VALUE! 200000 40000

Value Rs. In Lakhs 200001 150000

Solvency value is as per NIT

21 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender] 40000 500001 250000

Completed similar works during last 7 years You are Not Eligible Pls Select Works Completed during last 7 years 1000000 250000

Work NoI Type of Work [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Name of The organisation

Brief Description of Work: 2000000 500000

Completed value of Work in Rs. Lakh: 2000001 1000000

Date of Commencement of Work [DD/MM/YYYY]: 4000000 1000000

Date of Actual Completion of Work[DD/MM/YYYY]: 4000001 2000000

Work No II Type of Work [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Name of The organisation

Brief Description of Work

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]: work done

Work No III Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 24.07.2025 2555

Name of The organisation

Brief Description of Work: #VALUE!

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work Competion is NOT with in 7 years

Valid Class I Electrical Licence [or] Undertaking for engaging Electrical Contractor possessing valid Class I Electrical Licence Please Enter Electricial Licence No Electricial Licence valid upto Related Document to be Uploaded to eProcurement Portal

22 DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Sl.No Name of members or technical personllel avalable in the organization Qualification of similar nature number of years of experience

23 DETAILS OF MACHINERY AVAILABLE

Sl.No Name of Mechinery No Make Year of Manufacture

1 Concrete Mixers - Type etc

2 Vibrators - Diesel - Electrical

3 Weiding equipment's

4 a) Rectifiers

5 b) Welding Generators

6 Erection equipment's

10 Water Lifting motor pumps

13 Drilling Equipment's

16 Stone crushers

17 Bitumen hot mixture plant

18 Bitume boiler

20 Batching plants

21 Vibratory rollers

23 Cranes-Details

24 Concrete pumps

26 Rock breakers

27 Transit mixers

29 Weight batches

24 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Ph. No. with STD code

FAX No. with STD code

I/We declare and confirm that - 1. All information and attachments submitted in this application are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my application and suspension of any registrations granted. 3. I/We shall not make refund claims of expenditure incurred in processing this application. Pls enter

26 Tender Document Cost and EMD details

Descipttion Enclosed / Not enclosed Valid upto [in case of BG] Related Document to be Uploaded to eProcurement Portal

Tender cost Enclosed

27 Average annual financial turn over during the last 3 years, ending 31st March 2024 [ should not be less than 30% of amount put to tender] and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account statement. . (In Lakhs)

2023-24 Pls Select 'Yes','No' for Annual financial turn over for all the 3 years

Average 0.00 FALSE

Balance sheet and Profit & loss statement for last 05 years