For the Work of Laying of 11kV Cable Under BP 2025-26 EUDD Sri Gorakhnath, Gorakhpur

Amount

fo|qr uxjh; forj.k [k.M&Jh xksj[kukFk] xksj[kiqj ds vUrxZr fctusl Iyku esa Lohd`r Hkwfexr dsfcy fcNkus ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

3x185 mm2 XLPE 11 KV

Cable jointing kit 11 KV XLPE 3X185 sq mm

Cable jointing kit 11 KV XLPE 3X185 sq mm S/T

PCC 11 Mtr. Long

11 KV Dropper Channel

11 KV Top Channel

11 KV Pin Insulator

11 KV pin with net

Stay Complete

Earthing Complete

Supply of following material/fitting complete in all respect :-

HDPE Pipe dia 150 mm PN 6 PE 8

Cable Route Marker

Holding clamps for top, dropper, t-off etc

G.I Nuts & Bolts off size

G.I Pipe dia 150 mm

The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp/PCC Clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). In case of ST Pole Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. All work will be done as per RESPO norms & relevent IS Specification.

Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with nozelling and binding of stay wire (Complete work)

Earthing of Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO Norms.

Laying of HDPE Pipe 150 mm Diameter for laying of 11 KV XLPE 3X185 sq mm Cable by horizontal drilling method. The HDPE pipe shall be of PE 80 grade with pressure rating PN6 conforming to IS 4984/1995 and shall have wall thickness of 6.20 to 7.10 mm (HDPE pipe 150 mm dia with elbow and socket for cable will be supplied by contractor)

Laying and dressing of under ground 11 KV XLPE 3X185 sq mm into HDPE Pipe (Wherever required) by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required.

Erection of 11 KV XLPE 3X185 sq mm Jointing Kit with complete work

Erection of Cable Route Marker

Making Loop alongwith dressing, Marking, Tagging and Hoisting of cable on Single/Double pole using G.I. Pipe 6"dia 3 mtr. Long with complete work.

Manish Traders (BID ID -5528241)

M/s S.B.S. Traders (BID ID -5526269)

M/s Anil kumar singh (BID ID -5527731)