Construction Of Excise Court Building (G+2) at Civil Court , Saharsa.

Bill of Quantity

Name of Work:- Construction Of Excise Court Building (G+2) at Civil Court , Saharsa.

Estimated Cost:- 5,97,62,036.00

Earnest Money :-11,95,300.00

Cost of B.O.Q :- 10,000.00

Date of Tender :-

Time of Completion :-

S.NO. S.O.R PARTICULARS OF WORK QUANTITY RATE UNIT AMOUNT

1 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kinds of soil 1320.02 360.70 cum 476130.00 935.467 32.65 34.4 14.4 303.10 1320.017

2 2.27.1 Extra for every additional lift of 1.5 m or part thereof in all kind of soil etc. all complete jobs. 233.87 49.40 cum 11553.00 233.867 233.867

3 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 459.91 123.90 cum 56983.00 459.91 459.91

4 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 1070.51 287.30 cum 307557.00 539.088 2.04 0 1.08 499.92 5.65 22.73 1070.508

5 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l. 1190.94 283.30 sqm 337394.00 974.568 13.38 8.8 8.42 185.7744 1190.9424

6 11.73 Providing designation 100 A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 1459.22 444.80 sqm 649061.00 1459.22 1459.22

7 4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 0

(i) 4.1.3 1:2:4(1 Cement :2 coarse and:4 graded stone aggregate 20 mm nominal size) 81.42 3998.10 cum 325505.00 68.635 0.88 0.54 11.36 81.415

(ii) 4.1.2 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 220.92 4420.80 cum 976643.00 2.04 218.88 220.92

8 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 47.17 4688.30 cum 221147.00 3.75 47.1744 50.9244

9 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 19.05 5670.00 cum 108014.00 1.98 19.0512 21.0312

11 5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. 3.75 5063.40 18988.00

12 5.33.2.1 All work above Plinth level upto floor V Level. Concrete of M-25 grade with minimum cement content of 330 kg/cum 1.98 5863.20 11609.00

13 5.33A Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete. 0

(A) 5.33A.1 All work upto plinth level 393.87 4756.90 cum 1873600.00 392.275 1.6 393.875

(B) 5.33A.2 All works above plinth level upto floor V level 0

(C) 5.33A.2.1 Walls columns, pillars, posts cind struts 112.45 5293.50 cum 595233.00 112.446 112.446

(D) 5.33A.2.2 Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. 354.74 5677.20 cum 2013924.00 354.739 354.739

14 5.33B Add or deduct for providing richer or leaner mixes respectively at all floor levels. 0

(i) 5.33B.1 Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. 859.46 164.50 cum 141381.00 859.46 859.46

15 5.9 Centring and shuttering including strutting,propping etc. and removal of form for. 0

(i) 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 370.81 211.60 sqm 78463.00 214.859 4.94 89.34 61.68 370.819

(ii) 5.9.3 Suspended floors, roots, landings, balcnies and access platform. 1262.55 437.50 sqm 552363.00 1252.935 9.61 1262.545

(iii) 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 1461.24 404.70 sqm 591365.00 1290.489 1.67 4.88 164.2032 1461.2422

(iv) 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts 1403.99 494.40 sqm 694133.00 1007.4 19.8 376.7904 1403.9904

(v) 5.9.7 Stairs,(excluding landings) except spiral-staircaces. 185.03 439.90 sqm 81394.00 185.029 185.029

(vi) 5.9.16.1 Edges of slabs and breaks in floors and walis- Under 20 cms wide 273.60 130.20 m 35623.00 273.6 273.6

(vii) 5.9.19 Weather shade,Chajjas, corbels etc. including edges 95.72 550.90 sqm 52734.00 95.723 95.723

(viii) 5.9.2 Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. 68.01 375.10 sqm 25511.00 68.012 68.012

16 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 0

i 5.22.7A Thermo-Mechanically Treated bars TMTC-500- 8 mm dia. 26388.85 94.50 KG 2493746.00 24065 46.47 80.1 188.96 2008.44 26388.847823

ii 5.22.7B Thermo-Mechanically Treated bars TMTC-500- 10 mm dia. 25331.80 92.60 KG 2345725.00 24065 61.86 1205.064 25331.804

iii 5.22.7C Thermo-Mechanically Treated bars TMTC-500- 12 mm dia. 16860.53 90.80 KG 1530936.00 12032 7.94 4820.1552 16860.53411

iv 5.22.7D Thermo-Mechanically Treated bars TMTC-500- 16 mm dia. 24505.78 91.70 KG 2247180.00 24065 440.9 24505.777823

v 5.22.7E Thermo-Mechanically Treated bars TMTC-500- 20 mm dia. 24064.88 91.70 KG 2206749.00 24065 24064.877823

vi 5.22.7F Thermo-Mechanically Treated bars TMTC-500- 25 mm dia. 12032.44 91.70 KG 1103375.00 12032 12032.43891

17 6.1A Brick work with bricks of class designation 100A in foundations and plinth in 0

18 6.1.14A Cement mortar 1:6 (1 cement: 6 coarse sand ) 12.03 4819.90 cum 57983.00 12.03 12.03

19 6.1C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in etc. 0

(i) 6.1.14.C Cement mortar 1:6 (1 cement: 6 coarse sand 388.21 4923.00 cum 1911163.00 388.211 388.211

20 6.1.14C+ 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra tor Brick work in superstructure above plinth level upto floor V cum 61.59 5765.20 cum 355072.00 61.59 61.59

21 6.1C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in etc. 0

(i) 6.1.12.C Cement mortar 1 : 4 (1 cement : 4 coarse sand) 79.75 5116.30 cum 408004.00 51.226 28.52 79.746

22 6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 8.96 5017.90 cum 44960.00 8.96 8.96

23 6.3C Extra tor Brick work in superstructure above plinth level upto floor V cum 375.29 842.20 cum 316068.00 375.289 375.289

24 6.21A Extra for providing and placing in position 2 Nos, 6 mm dia, MS bars at every third course of half brick masonry (with F. P. S. bricks) 409.81 113.60 sqm 46555.00 409.811 409.811

25 13.24.2 6 mm cement plaster to ceiling of mix :1:4(1 cement: 4 coarse sand) 1633.18 125.60 sqm 205127.00 1633.179 1633.179

27 13.12.2 15 mm cement plaster on rough side of single or half brick wall of mix.1:6 (1 cement: 6 coarse sand) 1765.26 176.40 sqm 311391.00 1765.255 1765.255

28 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement 11.60 203.60 sqm 2362.00 11.6 11.6

30 13.26 Neat cement punning over plaster surface etc. 148.42 40.50 sqm 6011.00 136.815 11.6 148.415

31 0362C Supplying providing brick bats of approved quality for recharge Pit 5.49 1355.93 cum 7444.00 5.49 5.49

32 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth 82.09 436.60 sqm 35840.00 82.089 82.089

33 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 82.09 1087.90 M 89305.00 82.089 82.089

34 10.15 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge 0

36 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 0

(i) 9.48.1 Fixed to steel windows by welding 1972.41 144.50 kg 285014.00 1972.414 1972.414

(ii) 9.48.2 Fixed to opening/wooden frames with rawl plugs screws etc. 2103.19 161.10 kg 338824.00 461.16 1642.032 2103.192

37 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 9.48 6303.40 sqm 59750.00 9.479 9.479

38 10.17 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. 85.00 174.60 EACH 14841.00 85 85

39 9.147D.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 98.62 9471.00 sqm 934039.00 98.621 98.621

40 9.143 Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm ( ± 0.2 mm) , corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer’s specification and direction of Engineer-in-charge. 65.58 516.80 M 33892.00 65.58 65.58

41 9.142.1 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm,out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core 19.55 3305.50 sqm 64632.00 19.55 19.55

42 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 797.04 546.80 kg 435821.00 797.04 797.04

43 11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab. 373.68 82.90 M 30978.00 373.68 373.68

44 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. 0

45 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 0

47 11.39 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1 st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours such as white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. 58.22 1329.80 sqm 77425.00 58.223 58.223

48 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 261.39 795.00 sqm 207803.00 261.387 261.387

49 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) 3rd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) 4th course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). 113.02 480.60 sqm 54317.00 113.019 113.019

50 22.8.1 Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. With average thickness of 120 mm and minimum thickness at khurras point to be 65 .. 423.45 850.70 sqm 360228.00 423.45 423.45

51 13.13.1 + 13.26 + 13.36.5 Providing 20 mm cement plaster of mix : 1:3 (1 cement: 3 coarse sand) + Providing Neat cement punning + Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 20 mm cement plaster 1:3(1 cement:3 sand) 423.45 280.90 sqm 118947.00 423.449 423.449

52 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete 6.00 189.40 EACH 1136.00 6.00 6

53 13.113.1 Forming groove of uniform size in the top layer of washed stone grit piaster as per approved pattern using wooden batten nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charges. 366.00 31.40 M 11492.00 366 366

54 11.20 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) 0

55 11.20.3 Dark shade using ordinary cement 304.81 766.70 sqm 233700.00 304.813 304.813

56 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 0

(i) 9.20.1 35 mm thick including stainless steel butt hinges with necessary screws- 55.50 2845.60 sqm 157939.00 55.503 55.503

57 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured) 57.18 401.40 sqm 22953.00 57.183 57.183

58 9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 0

59 9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 0

60 9.66 Providing and fixing ISI marked oxidised M.S. handles conforming to IS :4992 with necessary screws etc. complete: 0

61 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. 0

62 9.101 hanging floor door stopper 0

(A) 9.101.1 Twin rubber stopper 27.00 60.80 EACH 1642.00 27 27

63 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 27.00 979.50 EACH 26447.00 27 27

64 9.76 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 0

65 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 0

(i) 8.2.1.2 Rajnagar plain white marble /Udaipur green marble/ Zebra block marble Area of slab over 0.50 sqm 465.63 2615.30 sqm 1217762.00 465.63 465.63

66 8.2.2 Granite of any colour and shade 0

67 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 0

(i) 10.16.1 Hot finished welded type tubes 4543.15 123.90 kg 562896.00 4543.151 4543.151

68 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length. 0

69 9.1.3 Kiln seasoned and chemically treated hollock wood. 4.99 63149.60 m3 314927.00 4.987 4.987

70 2413 Supplying Providinhg and fixing 12 mm thick commercial ply etc. all complete jobs. 131.12 675.59 m2 88580.00 131.115 131.115

71 13.80.A2 Providing and applying white cement based putty of average thickness 2 sqm 46.50 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 5972.93 105.40 sqm 629547.00 5972.926 5972.926

72 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: 14.52 38.60 sqm 560.00 14.52 14.52

73 13.78.1+13.79.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats) 844.30 119.80 sqm 101147.00 844.3008 844.3008

74 13.79.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats) 14.52 81.20 sqm 1179.00 14.52 14.52

75 13.77 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade 0

(i) 13.77.1 New work (two or more coats ) over and including priming coat with cement primer 4207.67 102.30 sqm 430445.00 4207.67 4207.67

76 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade : 0

(i) 13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 1957.83 137.00 sqm 268222.00 1765.255 192.57 1957.825

77 13.81 Applying priming coat 0

i 13.81.3 With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works 20.50 34.60 sqm 709.00 20.5 20.5

78 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: 102.60 83.50 sqm 8567.00 20.5 82.1 102.6

79 13.93 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: New steel work (two or more coats) 0

13.93.1 Two or more coats on new work 288.03 84.50 sqm 24339.00 288.031 288.031

80 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0

81 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0

(A) 12.79.1 Coupler 0

(B) 12.79.3 Single tee with door 0

(C) 12.79.4 Single tee without door 0

(E) 12.79.6 Shoe plain 0

82 12.80 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 0

83 23.10 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more tili the grass forms a thick lawn free form weeds and fit for mowing including supplying good earth if needed. 0

84 23.10.3 In rows 5 cm apart in either direction. 222.30 1027.40 100 m2 228391.00 222.3 222.3

85 CARRIAGE OF MATERIALS 0

86 EXTRA COST OF MATERIALS 0

SANITARI INSTALLATION 0

87 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 5.00 4470.90 EACH 22355.00 0

88 17.81 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including ntegrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 7.00 14663.50 EACH 102645.00 0

89 17.7.8 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers 12.00 3694.30 EACH 44332.00 0

90 17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 0

(i) 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern 12.00 3723.20 EACH 44678.00 0

91 17.10.2.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board , 610x510 mm bowl depth 200 mm 1.00 3786.60 EACH 3787.00 0

92 17.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe, 40 mm dia 24.00 104.40 EACH 2506.00 0

93 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm 12.00 857.00 EACH 10284.00 0

94 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 12.00 713.30 EACH 8560.00 0

(i) 17.73.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms 12.00 397.30 EACH 4768.00 0

95 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0

Concealed work, including cutting chases and making good the walls etc. 0

i 18.8.2 20 mm dia nominal bore 140.00 350.80 M 49112.00 0

ii 18.8.3 25 mm dia nominal bore 120.00 463.10 M 55572.00 0

96 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0

i 18.7.4 32 mm dia nominal bore 120.00 395.20 M 47424.00 0

ii 18.7.5 40 mm dia nominal bore 30.00 538.40 M 16152.00 0

97 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 0

i 18.17.2 32 mm nominal bore 5.00 589.90 EACH 2950.00 0

ii 18.17.3 40 mm nominal bore. 5.00 707.30 EACH 3537.00 0

98 18.19.3.2 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore , Vertical 5.00 1049.20 EACH 5246.00 0

99 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 12.00 886.20 EACH 10634.00 0

100 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 10.00 434.20 EACH 4342.00 0

101 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore 10.00 715.10 EACH 7151.00 0

102 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 26.00 594.80 EACH 15465.00 0

103 18.21.1 Providing and fixing uplasticised PVC connection pipe with brass ions 26.00 74.80 EACH 1945.00 0

104 17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 6.00 1500.00 EACH 9000.00 0

105 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 7.00 299.40 EACH 2096.00 0

106 19.30 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 0

i 19.30.1.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 10.00 4266.80 EACH 42668.00 0

107 18.58.2.1 Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid. 150 mm nominal size square,18 mm high with 100 mm dia of the inner hinged round grating. 26.00 169.70 EACH 4412.00 0

108 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 12.00 96.80 EACH 1162.00 0

109 18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter 1.00 166.30 EACH 166.00 0

110 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 14000.00 9.70 litre 135800.00 0

111 19.6 Providing, laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement motor in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 0

112 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0

113 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1.00 33603.40 EACH 33603.00 0

114 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level All types of soil 300 mm dia 90.00 486.80 M 43812.00 60 30 90

115 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge 100 mm nominal size dia 50.00 660.10 M 33005.00 100 100

116 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia 40.00 673.50 M 26940.00 10 30 40

117 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge 3.00 1195.60 cum 3587.00 3 3

118 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge 6.00 1343.20 cum 8059.00 12 12

119 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 12.00 916.80 Hour 11002.00 24 24

120 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:150 mm dia 1.00 210.70 EACH 211.00 2 2

121 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.150 mm clamp 1.00 1531.40 EACH 1531.40 2 2

122 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 150 mm dia 1.00 281.80 EACH 281.80 2 2

123 18.7.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 50.00 538.40 M 26920.00 100 100

124 AR Supplying fitting fixing 2 H.P submersible motor pump 1.00 32086.00 EACH 32086.00 1 1

FIRE Fighting Work 0

125 3 a) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) 0

b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. 0

c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. 0

d) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. 0

e) Suitable cement concrete foundation duly plastered and with anti vibration pads. 0

126 7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 0

i 7.6 80mm nominal bore 40.00 951.00 M 38040.00 0

ii 7.7 100mm nominal bore 40.00 1316.00 M 52640.00 0

iii 7.8 150mm nominal bore 40.00 1856.00 M 74240.00 0

127 9 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : 0

i 9.1 Single headed Gunmetal 6.00 7245.00 Set 43470.00 0

128 10 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : 0

i 10.2 Single headed Stainless steel 2.00 5722.00 Set 11444.00 0

129 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. 0

a 11.4 80mm nominal bore 6.00 4588.00 Set 27528.00 0

b 11.5 100mm nominal bore 6.00 6056.00 Set 36336.00 0

c 11.6 150mm nominal bore 6.00 8241.00 Set 49446.00 0

130 12 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 0

131 13 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 6.00 1236.00 Set 7416.00 0

132 14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 0

133 15 Providing, installation, testing and commissioning of stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 0

134 16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : 0

135 17 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following asrequired. 0

20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 0

20 mm nominal internal dia gun metal globe valve & nozzle. 0

Drum and brackets for fixing the equipmets on wall. 0

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 0

136 18 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required 0

137 19 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required 0

138 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 2.00 17707.00 Set 35414.00 0

139 24 Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, 0

140 AR Providing and fixing CO2 extinguiser consisting of seamless MS cylindrical body squeeze lever dishcharge valve, internal dishcharge tube, 30cm long high pressure discharge hose , discharge nozzle ISI marked capacity 4.50 Kg 15.00 10326.00 Set 154890.00 0

141 AR Providing and fixing storege multi purpose fire extinguisher consisting of welded M.S cylindrical body squeeze lever discharge valve, 30cm long high pressure dishcharge hose ISI marked capacity 6 kg 15.00 5500.00 Set 82500.00 0

Furniture Work 0

142 AR Godrej Aristo Table:- Supply and Installation of Table having size 2400 X 900 X 1100 MM made up of pure teak wood and carved design to give it a aesthetic look. Wood to be used must be properly treated to ensure termite and water resistance. Proper provision of rails, if any and bottoms has to be gives as per approved shop drawing. The Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 2.00 161800.00 Each 323600.00 0

143 AR Godrej Thril LC Chair :- Supply and Installation of Chair made up proper teak wood and carved design which is aesthetically good and comfortable. Seat and back are cushioned with proper required density foam being upholstered with pure leather/fabric/ as per buyer's choice. Wood to be used must be properly treated to ensure termite and water resistance.he Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 4.00 24840.00 Each 99360.00 0

144 AR Godrej Impress L Shape Table :- Supply and Installation of Knocked Down To Be Assembled At Consignee Site By The Seller Frame type: Free standing: Understructure of table Gable end and modesty panel Storage provided: One side,Keyboard tray: Not provided, Foot rest: Not Provided ,Table top Material: MDF board of grade SBG II of IS 12406/Latest,Gable end and modesty panel material Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest, Leg Material: NO LEGS, Table top long sides: To be post form half round profile, Table top plain sides: Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue, Gable end and modesty panel plain side: N.A, 2.00 110814.00 Each 221628.00 0

145 AR Godrej Kareena NXT Visitor Chair :- Supplying and Placing in Position Medium Back Chair. The seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 40.5 cm(W) x 60.5 cm(H) and of seat shall be 47.0 cm (W) x 48.0 cm (D). The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf.The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. The mechanism shall be designed with 360° revolving type, Upright-position locking, Tilt tension adjustment. The twin wheel castors shall be injection moulded in Black Nylon. 2.00 13907.00 Each 27814.00 0

146 AR Godrej Partho 3STR SOFA :- Supplying and placing of 3 SEATER sofa of Over all dimesion : 1950LX 940WX900 Ht (or Size as per approved model or space available) . Frame material should be made up of teak wood. Cushioning of Sofa should be done with proper density as per buyer's requirement along with upholstery of Fabric/leatherite.The Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 4.00 40284.00 Each 161136.00 0

147 AR Godrej ALICE COFFEE TABLE :- Supply and Installation of Center Table for Reception. The size of table shall be 1200mm (W) x 600mm (D) x 460mm (H). The table is made of Glass top with SS understructure. 10 mmtampered glass top & 8 mm tampered bottom glass for storage option. The Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 4.00 21642.00 Each 86568.00 0

148 AR GODREJ 5 SHELF STEEL RACK :- Supply and Installation of Slotted angle racks in record room for storing the file having an size of 1800 x 900 x 450 mm. The racks should be supplied in MS sheet being powder coated of minimum 50 Micron.The Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 10.00 13500.00 Each 135000.00 0

149 AR GODREJ STORWEL PLAIN :- Supplying, Installation and Placing in Position Almira. This shall have an overall size of 900mm(W)x450mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.The Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 8.00 30331.00 Each 242648.00 0

150 AR GODREJ T-9 TABLE :- Supplying and Installtion of Assitant table in courtroom having Table. Size shall be 7200 Length mm x 900 Depth mm x 750 Height mm . Table top shall be made up of 25 mm MDF board. The table gable end shall be 18 mm MDF board , 3 mm prelam MDF board. Provision of Keyboard tray and CPU trolley has to be provided. Provision of supplying and installing 8 Nos of Mobile pedestals made up of MDF board has to be ensured by the vendor having proper drawer and storage.Vendor has to supply the product as per approved shop drawing, color and shade from competent authority.The Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 2.00 32331.00 Each 64662.00 0

151 AR GODREJ BRAVO MB CHAIR :- Supply and Installation Medium Back Chair- Chair Size (Black Height-530xBlack Width-460)mm&(seat depth-450x Seat Width-460)mm with Min-Max Height (420-520)mm.Nylon base chair with push back mechanism & Fix handle.Nylon base chair with push back mechanism.Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechanism with locking system and five star chrome base with water proof plywood os ISI303.Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users.Quick and easy adjustment regulated height of chair relative to floor.Color-As per Buyer's choice.The Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 16.00 13045.00 Each 208720.00 0

152 GODREJ T-104 TABLE :- Supply and Installation of PA Table with Side Unit- Table top Size (1800Lx 900Dx 760H)mm with 50 MM table top thk & Side runner size -(1200L x 400D x 760H) with 35 MM thk. Straight line table with two wire manager. Mobile pedestal with 3 drawer/center lock. Interchangable side runner with 3 drawer with lock.one open shelf on closed shutter with lock key board trey & CPU trolly. Pre- Laminated Particles Board & Edge band thickness will be start from 2mm for top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white 100% Sabish design & texture & 100% Product Consistency fade resistance lamination best International Technology. Color-Wenge/ As per buyer's choice.The Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 4.00 40807.00 Each 163228.00 0

153 GODREJ OXBO HB CHAIR :- Supply and Installation of High Back Chair with revolving.Size (Seat -510x480,Back-660x510,Height-Min,470mm Max540mm) Chrome plated base with gas height adustment and central tilting with single locking machenaism. Armrest with padding.Leatherette uphostery has the look and feel of top grain leather. Cushion with lumber support for all confort. Chrome plated loop armrest with padded upholsery for extra comfort. Chair rotates a full 360 degree in either direction for ease motion.Standard on every executive & controls rate and ease with which chair relines to different weight and strengths of users.Quick and easy adjustment regulated height of chair relative to floor. Color-As per buyer's choice.The Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 2.00 11166.00 Each 22332.00 0

154 GODREJ STYL0 TABLE :- Supply and Installation of Data Operator Table having 3 drawer pedestal: table size would be 1500LX900DX 750HT. Table top made of 30mm thk in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top 1mm for rest parts.PLPB certified from ISI grade & Termite,Borer & Fungus resistance laminated outside in selected color & inside (Non visible Part) will be balancing white, 100% sabish design & texture & 100% Product Consistancy, color -wenge/As buyer's choice.Tabletop supported with 18mm thk gable end & modesty panel in Prelaminated Particle Board with pvc edge banding side Pedestal of 400Lx 450Dx600HT (3 drawer).The Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 12.00 18310.00 Each 219720.00 0

155 GODREJ NANO PERCH :- Supplying and Instalation of Visitor chair having made up of 12 mm plywood with cushion and upholstered with mesh fabric/leatherite. Chair Size Back Height - 400mm, Back Width-410mm. Seat Depth - 430mm & Seat Width 470mm. Black/Red Net Fabric & Powder coated frame. A 14mm thick BWR grade plywood (IS:303) is used to make the seat and back. Deep cushioned back and seat confirmed to body contours for proper aligment,posture and all day comfort, color - as per buyer's choice/Black.The Product should be BIFMA and IGBC Certified as Per direction given by E/I. Make: Godrej, Herman Miller, Sabish or Equivalent 38.00 26825.00 Each 1019350.00 0

156 GLASS DOOR STORWEL :- Supply and Installtion of GLASS DOOR STORWEL having size (916x450486x1980)mm, 2.00 40440.00 Each 80880.00 0

157 GODREJ APO Bed :- 1.00 15680.00 Each 15680.00 0

158 GODREJ BOOK CASE :- Supply and Installtion of storage cabinet having size (1200x450x900)mm,Locable side runner with sliding sutter & shelf, made of 25mm thk pre lam particle board with edge banding. Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts.PLPB certificate from ISI grade & Termite Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part ) will be balancing white,100% Sabishdesign & texture & 100% Product Consistency.Color - Wenge/ As per buyer's choice 20.00 39879.00 Each 797580.00 0

159 ZEN MATTRESS :- UrbanBed Zen Memory Foam King Bed Mattress | 15 Years Warranty | Swirl Gel Viscoflex Memory Foam | UltraFresh Treated Washable Cover | 120 Nights Trial (72" x 72" x 4") Medium Soft Mattress 1.00 5681.00 Each 5681.00 0

Total Amount of SOR Item for all work (i) 43336714

Total Amount of Non Schedule Item for all work (ii) 4165063

Applying Correction Factor @ .982 on Scheduled item Only (A) (iii) 42556653 48795645

ADD GST 5.36 % (Only on Scheduled Item) (C ) (iv) 2281037 #REF!

Gross Total (ii) + (iii)+ (iv) 49002753 49003031

1 1.3 Wiring for light point/ fan point/ exhaust fan point/ Call bell Point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch, modular Plate, suitable size G.I box etc. as required.

Batten holder point 65

Tube light point 81

Downlighter point 70

LED st. light point(120W) 12

Ceiling fan point 65

Exhaust fan point 21

2 1.31 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 34 Each 414.00 14,076.00

3 1.32 Supplying and fixing suitable size of G.I. box with modular plate and cover in front or in surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 28 Each 531.00 14,868.00

4 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 420 Meter. 309.00 129,780.00

5 1.53 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amps modular SP MCB 'C' curve, including connections, painting etc. as required. (for AC terminal) 16 Each 683.00 10,928.00

6 1.55 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 26 Each 632.00 16,432.00

7 1.57 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as reqd. 12 Each 1,064.00 12,768.00

8 1.7 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(For ckt.) 795 Meter 201.00 159,795.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(For Comp.+2x5A SSC*) 570 Meter 246.00 140,220.00

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire (For AC) 240 Meter 309.00 74,160.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire (Light DB) 40 Meter 422.00 16,880.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire (For Light DB+Computer DB) 120 Meter 660.00 79,200.00

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire (For Power DB) 80 Meter 925.00 74,000.00

1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire (For LIGHT VTPN DB's) 60 Meter 1,312.00 78,720.00

1.7.14 4 X 25 sq. mm + 1 X 6 sq. mm earth wire (For POWER VTPN DB's) 40 Meter 2,235.00 89,400.00

9 1.15 Supply and drawing the following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

1.15.1 1 X 1.5 sq. mm (For Inverter wiring) 450 Meter 38.00 17,100.00

10 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet 12 Each 131.00 1,572.00

1.24.7 TV antenna socket outlet 10 Each 131.00 1,310.00

11 1.27 Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required.

12 1.16 Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required.

13 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required

14 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar, din bar inerconnections, powder painted including earthing etc. as reqd.(But without MCB/RCCB/Isolator)

2.8.5 6 ways, Double door 2 Each 2,197.00 4,394.00

15 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar, din bar, inerconnections, powder painted including earthing etc. as reqd.(But without MCB/RCCB/Isolator)

2.9.1 4 ways (4+12), Double door, horizontal type 6 Each 4,184.00 25,104.00

2.9.2 6 ways (4+18), Double door, horizontal type 4 Each 5,132.00 20,528.00

16 2.12 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, MCB suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6 A to 32 A, Single pole 152 Each 237.00 36,024.00

17 2.13 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, MCB suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.13.3 40 A, Double pole 2 Each 1,198.00 2,396.00

18 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs)

2.33.1 4 ways , Double door, I/C 160 A, MCCB 3 Each 12,107.00 36,321.00

19 2.34 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 250 amp, four pole MCCB's as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs etc as required. (but without MCCB's & MCBs)

2.34.1 4 ways , Double door, I/C 250 A, MCCB 2 Each 19,610.00 39,220.00

20 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing panel board including drilling holes in cubicle panel, making connections etc. as required.

2.4.1 100 A, 30 KA, FPMCCB (for lift) 2 Each 8,172.00 16,344.00

21 2.12 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, MCB suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

22 2.13 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, MCB suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.13.3 40 A, Double pole 2 Each 1,198.00 2,396.00

23 2.7 Providing and fixing following capacity 4 pole ON-load panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.

24 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 49 Sq. ft. 1,809.00 88,641.00

25 A/R Supplying of copper strip of all sizes for busbar strip/interconnection including drilling holes etc as reqd. 18 Kg 871.00 15,678.00

26 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 2 Each 6,536.00 13,072.00

27 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

28 7.7 Supply of following sizes and core PVC / XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

29 7.1 Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

7.1.2 Above 35 sq. mm and upto 95 sq. mm 50 Meter 326.00 16,300.00

7.1.4 Above 185 sq. mm and upto 400 sq. mm 140 Meter 368.00 51,520.00

FITTING & FIXTURES

30 1.33 Supplying and fixing 2 pin, 5/6 amp. ceiling rose on the existing junction box/ wooden block including connection etc as required. 171 Each 64.00 10,944.00

31 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 65 Each 80.00 5,200.00

32 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

6.1.5 12watt LED lamp 65 Each 239.00 15,535.00

33 1.38 Supplying and fixing electronic musical call bell suitable for single phase, 230 volts complete as required. 4 Each 351.00 1,404.00

34 5.1 Supplying and fixing 4' X 18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 81 Each 521.00 42,201.00

35 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

36 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

37 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 12 Each 1,038.00 12,456.00

38 1.25 Supplying and fixing two module stepped type electronic Fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 65 Each 358.00 23,270.00

39 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 65 Each 2,482.00 161,330.00

40 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

41 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 Set 13,721.00 27,442.00

42 3.17 Providing & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 30 Meter 144.00 4,320.00

FOR LIGHTNING ARRESTER

43 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 4 Each 416.00 1,664.00

44 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 4 Each 81.00 324.00

45 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 120 Metre 102.00 12,240.00

46 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 60 Metre 145.00 8,700.00

47 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 3 Each 102.00 306.00

48 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 2 Set 6323.00 12,646.00

49 3.9 Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with GI nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) 30 Metre 133.00 3,990.00

FOR CAMPUS LIGHT

50 8.22 Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation)

51 9.16 Providing and making of following sizes octagonal street light pole foundation in reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) of specified size including PVC conduit, form work, curing, reinforcement, excavation and refilling etc. as required.

9.16.2 For 6/7 metre pole (500mm X 500mm X 1400mm) 12 Each 4398.00 52,776.00

52 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

53 7.7 Supply of following sizes and core XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor for working voltage upto 1.1 KV as required.

7.7.3 10 sq.mm, 2 core (For campus light + ckt for campus light) 250 Metre 201.00 50,250.00

54 7.1 Laying of one number PVC insulated and PVC sheathed/ XLPE power cble of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

55 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 1 Set 6323.00 6,323.00

56 3.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. 220 Metre 53.00 11,660.00

57 1.15 Supplying and connection of following sizes ISI marked FR PVC insulated, single core copper conductor cable etc as reqd.

FOR FIRE ALARM & DETECTION SYSTEM

58 DSR 28.1.9 Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

59 DSR 28.1.2 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with 75 Each 1,223.00 91,725.00

60 DSR 28.1.4 Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. 3 Each 444.00 1,332.00

61 DSR 28.1.7 Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. 3 Each 530.00 1,590.00

62 DSR 28.5.1 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. & LSZH outer sheath complete as required. 750 Meter 386.00 289,500.00

Solar Photovoltaic Power Plant

63 DSR 17.1 Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc. as required. 28 KWp 54,280.00 1,519,840.00

a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV module used in any solar power project must have Radio frequency identification tag with information such as name of manufacturer, month and year of manufacturing, country of origin (separately for Solar cell and module), I-V curve, Unique Serial No and Model No of the module, Wattage, Im, Vm and FF, name of test lab issuing IEC certificate.

b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 415 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-in meter and data logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP. PCU/inverter shall be capable of complete automatic operation including wake-up, synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to IEC standard with shutdown/standby mode. It must be provided with grid islanding along with manual disconnect pole isolation switch besides automatic disconnection. Minimum protections: Mains Under / Over Voltage, Over current, Over/Under grid frequency, Over temperature, Surge voltage induced at output due to external source, Short-circuit, Lightening, Anti Islanding (for grid synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum parameters: DC input voltage, DC current, AC Voltage and current (all 3 phases, in case of 3 phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other parameters applicable standard. Communication interface RS 485 / RS 232.

c) Module mounting structure: The roof top solar plant generation units shall be installed by using supporting Aluminium/Galvanized MS structure (mass of zinc coating shall be as per IS4759 ) having minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting structure would be designed to sustain wind load and seismic parameter of the site of installation. All the structure shall be design as per applicable BIS code and the material shall also confirm the applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible with the materials used in the module frame, its fasteners, nuts and bolts. The suitable arrangements for maintenance and cleaning shall be provided.

d) Real time online web interfaced Data Monitoring System complete with accessories for various parameters such as Solar Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input Voltage and Current, Time Active, Time disabled, Time Idle, Power produced and other parameters as per standard practices.

e) Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. Each junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast aluminium alloy with full dust, water & vermin proof arrangement with High quality Suitable capacity Metal Oxide Varistors(MOVs) (semiconductor diode with resistant applied voltage)/ surge arrestors and suitable Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc.

f) Lightning, surge voltage protection, earthing protection and grid islanding.

g) Cables: Connections & Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV grade armored power and control cables(ISI Marked) along with supplying & fixing of necessary channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as required.

h) DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, etc. as required.

CCTV Surveillance System

64 DSR-40.2 Supplying Installation Testing and Commissioning of 2MP Fixed Lens IP IR Outdoor Bullet Camera having following specifications and features etc :-

1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video

2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt Smart IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

3) Compression (Minimum):-Video:- H.265 or better, H.264H, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120db or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable(Main stream: 2MP (1920 × 1080)@25/30 fps Sub streams minimum: 720P@25/30 fps).

7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade, trusted boot. 9) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; audio detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, 13) System Capability: ONVIF, Camera shall support open source VMS

14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VAC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

40.2.1 2MP @ 25/30fps@1080P (1920×1080) Outdoor Bullet Camera with 2.8/ 3.6mm fixed lens 8 EACH 7,760.00 62,080.00

65 DSR-40.1 Supplying Installation Testing and Commissioning of 2 MP IP IR Dome Camera having following specifications, type of lens and features etc :-

1) Signal System: PAL/NTSC, Signal to Noise Ratio: >50 dB, Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

3) Compression (Minimum):-Video:- H.265 or better, H.264H, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120db or more) 5) Digital Noise Reduction:- DNR (3D) On/Off

6) Video Streaming & Frame Rates :- Triple streaming , configurable (Main stream: 2MP (1920 ×1080)@25/30 fps,Sub streams minimum: 720P@25/30 fps). 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade, trusted boot. 9) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card.

10) Recording Management: Format SD, overwrite, storage management, video to NAS device 11) Alarm Trigger : Motion/tampering detection; audio detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast 13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VAC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

40.1.1 2MP (@ 25/30fps@1080P (1920×1080)) IP IR Dome Camera with 2.8/ 3.6mm fixed lens 12 EACH 8,048.00 96,576.00

66 DSR-40.11 Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications and features etc as mentioned below :

1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses to record per NVR and to provide a live view, storage and simultaneously Multi-channel playback of all IP camera or more and must be ONVIF with minimum support of 384 Mbps incoming Bandwidth. 2) NVR should support video compressions : H.265 or better, H.264, MJPEG. 3) Must support 1 channel RCA Input, 2 channel RCA Output for Two-way Talk with G.711U/A, G.711u, PCM, G726 audio compressions.

4) Intelligent auto power on when power resumes after power outage. 5) Storage: It should support minimum 8 SATA Slots with 20TB capacity/ Slot and RAID support of RAID 0/1/5/6/10. 6) Connectivity Interface : 2 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232, 1x eSATA Port 7) Backup Interface : Its should have 4 Nosx USB port (2x USB3.0, 2xUSB2.0) 8) Video Output Ports: 2x HDMI and 2 VGA 9) Alarm Ports: It should have 16/8 Ch In/ Out ports to connect various type of external sensors and output devices like hooter/ Siren etc. 10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number for power failure, HDD failure, vandalism, tempring, network disconnection and panic 11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and viewing.

12) Protocols: HTTP, HTTPS, TCP/IP, IPv4/IPv6, UDP, DHCP, DNS, SMTP, UPnP, IP Filter, PPPoE, FTP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP need. 13) Standards: CE, FCC, RoHS, BIS Certified 14) Power Supply : Should support AC100-240V, 50/60Hz Power supply.

15) Operating Condition : -5°C to 50°C, humidity 90% (max) (non-condensing) 16) The VMS application shall support all the features & functionalities of the offered cameras. 17) VMS should consist Licenses for all channels to record Cameras with General, motion detection, intelligent, alarm and POS recording modes. VMS should be provided with Camera Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras to achieve the functionality. 18) The NVR OEM shall be responsible for providing a mobile application compatible with both Android and iOS devices, enabling remote monitoring and playback of cameras/NVR footage. 19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP address for remote monitoring over the Internet. 20) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode 21) It should support Resolution: 32MP; 24MP; 16MP; 12MP; 8MP; 5MP; 4MP; 1080p; 720p; D1; CIF; QCIF 22) When alarm recording is enabled and an event occurs, you can click the alarm icon on monitoring page to view the alert details. The snapshot function is supported on monitoring and playback page

23) The Network Video Recorder (NVR) shall be configured to send email whenever a system message is created or an alarm event occurs. The email server shall be a valid SMTP server. Each recipient email address shall be configured to receive any combination of critical, warning, or informational messages or alarm notifications. When an alarm occurs, the email message includes the NVR name, time of alarm and a list of camera that is configured to record upon alarm

24) It should have Web and GUI interface. 25) Built-In Artificial Intelligence: NVR should have built-in AI :- - 2 Channel face detection and recognition, - Minimum 4 Channel perimeter protection, - Minimum 8 Channel Smart Motion Detection

26) Face Recognition Database Capacity: It should support total Blacklist and Whitelist capacity of Minimum 20,000 Faces or more with Face Detection speed of 12 face images/sec and facility to add Name, gender, birthday, address, credential type, credential No., countries & regions and state to each face image. 27) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group, glasses, expressions, face mask, beard, Top color, top type, hat, bag, age, gender and umbrella. 28) ANPR Capability: It should support ANPR Camera with License plate, plate color, vehicle body, vehicle model, vehicle logo, calling, seatbelt, vehicle registration location etc vehicle attributes. 29) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan, cybersecurity exception 30) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 31) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection.

32) Smart playback function: Should support smart search for the selected area in the video and smart playback to improve the playback efficiency 33) VCA (Video Content Analytic): Should support multiple video contented analytics based on camera analytics 34) Analytics by NVR: Perimeter protection and face recognation

40.11.1 32 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16/25/32(36), 2nd screen: 1/4/8/9/16 1 EACH 64,784.00 64,784.00

67 DSR-40.12 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

40.12.2 6TB (Terabytes) 1 EACH 16,376.00 16,376.00

68 DSR-39.1 Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

39.1.1 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+. 3 EACH 35,091.00 105,273.00

69 DSR-42.4 Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nits or better, Video wall mode should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response time less than 12ms, Display control shall be on monitor screen and programmable with remote (remote shall be supplied with system), Key Board, Optical Mouse, etc. as required.

42.4.2 42 inch or larger 1 EACH 51,459.00 51,459.00

70 DSR-39.17 Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required.

39.17.1 1 Run of cable 305 Meter 60.00 18,300.00

71 DSR-39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.

72 DSR-39.18 Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non- Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required.

39.18.1 1 Run of cable 725 Meter 74.00 53,650.00

73 DSR-39.15 Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. 32 EACH 302.00 9,664.00

74 DSR-39.11 Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel.24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. 3 EACH 5,278.00 15,834.00

75 DSR-39.13 Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.

39.13.1 Copper Patch Cords of length 1m (3ft) 32 EACH 173.00 5,536.00

39.13.2 Copper Patch Cords of length 3m (10ft) 32 EACH 405.00 12,960.00

76 DSR-39.14 Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. 32 EACH 212.00 6,784.00

77 DSR-39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.

78 DSR-39.14 Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. 0 EACH 212.00 0.00

79 DSR-39.1 Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

39.1.1 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+ 2 EACH 35,091.00 70,182.00

80 39.3 Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of min. 168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD Snopping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN, VLAN Trunking, DHCP Snopping, Server, server Screening. RADIUS , TACACS+ Authentication, ǪoS: 802.1P, 8 queues per port, ǪoS : WRR, Strict+WRR, WRED, 802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.3ah, sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.

39.3.1 24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each copper port supporting 802.3at PoE+ min. 3 EACH 125,393.00 376,179.00

81 DSR-39.8 Supplying, Installation, Testing and commissioning of indoor Wireless Access Point for High density use having features and specifications etc. as mentioned here under- WiFi6 802.11ax 574Mbps (2.4GHz) + 2402Mbps (5GHz), WIFI 6 Certified, 1 x RJ45 console port, MG 2.5G LAN POE Port, factory reset, WPA/WPA2/WPA3™ Personal/Enterprise, WEP 64/128-bit, SSID broadcast disable, MAC address access control, Internal RADIUS server, SNMP, Customizable Captive Portal, Auto Channel, Works as Access Point, WDS, WDS with AP, Wireless Client ., Web (HTTP), Secure Socket Layer (SSL), Traffic control, Support ATF/Fast Roaming/Band Steering, Supports enhanced security – WPA-PSK/WPA2- PSK/WPA3-PSK and RADIUS client, and Cipher negotiation, and MAC/ IP ACL for networks, Certifications: MTCTE, CE, FCC. Works as Standalone, Compatible with S/W & H/W Controller with addtional features like - Real-Time Monitoring and Alerts, Rich Advanced Features, Centralized Device Management, Role-Based Administration, Real-Time Monitoring, VLAN and Access Control, Auto RF Management and Bandwidth Optimization, Multi-SSID and Captive Portal Authentication.OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required. 6 EACH 35,559.00 213,354.00

82 Supply, Installation, Testing and Commissioning and final testing of automatic lift complete in the shaft well and pit already constructed as per CPWD Specification including automatic rescue device (ARD), all standard equipments, accessories and control equipments as per manufacture's design and as per CPWD specification (Part-III LIFTS) on turnkey basis, conforming to NBC/Statutory norms and fulfilling following requirements. (i) Type: Passenger lift. (ii) Load: As specified. (iii) Speed: 1.00 metre/sec.

(iv) Control: ACV3F, 32 bit microprocessor integrated serial communication control system with RMS (remote monitoring system)/BMS (Building monitoring system) supporting software. (v) Motor/machine: Permanent magnetic synchronous gearless motor. (vi) Operation: Simplex collective selective with/without lift attendant.

(vii) Total rise: About 3 mtrs. (approx) between two stops. (viii) Landings: All floors on same side. (ix) Floor served: As specified. (x) Signals : Digital car position indicator, car travel direction indicator inside car & at all landings, voice annunciator with suitable music shall be provided in the lift car. (xi) Shaft size: As per manufacturer's design and as per CPWD specification (Part III LIFTS), Shaft to be constructed separately.

(xii) Guide rail: As per manufacturer's specification. (xiii) Lift & Car size: As per manufacturer's design and as per CPWD specification (Part III LIFTS). (xiv) Car Entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS). (xv) Landing Entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS). (xvi) Car door: S.S. (Stainless steel) hairline finish centre opening door . (xvii) Landing door: S.S. (Stainless steel) hairline finish centre/telescopic opening door .

(xviii) Door operation: Automatic electric power operated door, full height infrared curtain with multiple criss/cross light beams. (xix) Car interior: S.S. (Stainless steel) panel with hair line finish on all sides. (xx) Car floor: Anti skid PVC flooring on heavy duty MS (mild steel) platform. (xxi) Car ceiling & lighting: S.S. (Stainless steel) finish with aesthetic appearance with LED Ceiling lights. (xxii) Car ventilation: Pressure fan/blower fan (car fan with automatic sleep timer shall be provided). (xxiii) Emergency lighting in car: Battery operated emergency lighting in the lift car. (xxiv) Intercom system: Battery operated intercom system in lift car, machine room and ground floor/control room. (xxv) Emergency alarm: Battery operated alarm bell system in lift car & control room/ground floor. (xxvi) Position of machine room: MRL (xxvii) Electric power supply: AC 415V, 3 Phases 50 Hz & AC 230 V1 Phase 50 Hz terminated in machine room.

By Analysis of Quotation from KONE (Proposal no.KEI/0040/202604/0018521332) & Schindler (offer no. 0304135211) (xxvi) Position of machine room: MRL (xxvii) Electric power supply: AC 415V, 3 Phases 50 Hz & AC 230 V1 Phase 50 Hz terminated in machine room. (xxviii) Fire man switch: Fire man switch at machine room/terminal landing. (xxix) All car panel buttons and all floor switches must be with braille language as per lift act. (xxx) Audio visual indication in the lift car showing overloading shall be provided such that doors keep open till excess load is removed. (xxxi) Spring buffer/hydraulic buffer shall be provided. (xxxii) Mechnical over speed governor, door key holes in the floor doors shall be provided. (xxxiii) Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works, foundations for the machines etc. (xxxiv) In the hoist way fascia plate shall be provided. (xxxv) Permanent wiring in lift machine room and lift well with proper no. of light points, with fixtures, exhaust fan, plug points and 3 phase 440V power supply shall be made in lift shaft by the department, machine room or at desired level. (xxxvi) Car top safety barricade shall be provided.

(xxxvii) ARD (automatic rescue device): Solit state inbuilt automatic rescue device (ARD) automatically rescues passengers trapped in the lift car in between floors in the event of power failure. Automatic operation and immediate action in the event of mains failure, capable of moving the lift to the nearest landing, opens the automatic door of the lift car and floor. Sealed maintenance free battery backup with automatic charging unit and auto changeover device on mains failure. ( 1st Year free maintenance of lift including 3rd party inspection) Make: OTIS/KONE/SCHINDLER/MITSHUBISHI/THYSSENKRUP

10 Passenger, (680 KG) (G+2) MRL LIFT 2 JOB 1,739,280.00 3478560.00

Operation for one year ,Semi skilled (2 nos x 1 shift) 2 1 shift 193,283.00 386566.00

83 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

Exhaust Fan Point 2

Bulk-Head point 6

1.3.3 light point- Group - C 8 p/pt. 1,146.00 9168.00

84 1.32 Supplying and fixing suitable size of G.I. box with modular plate and cover in front or in surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 8 Each 531.00 4,248.00

85 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 120 Meter 309.00 37,080.00

86 1.7 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(For ckt.) 20 Meter 201.00 4,020.00

1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire (For lift DB) 40 Meter 1,312.00 52,480.00

87 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar, din bar, inerconnections, powder painted including earthing etc. as reqd.(But without MCB/RCCB/Isolator)

2.9.1 4 ways (4+12), Double door, horizontal type (for Lift) 2 Each 4,184.00 8,368.00

88 2.12 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, MCB suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6 A to 32 A, Single pole 16 Each 237.00 3,792.00

89 1.33 Supplying and fixing 2 pin, 5/6 amp. ceiling rose on the existing junction box/ wooden block including connection etc as required. 2 Each 64.00 128.00

90 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

91 5.1 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser, IP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. etc as required. 6 Each 1,275.00 7,650.00

92 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 4 Set 13,721.00 54,884.00

93 3.17 Providing & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 100 Meter 144.00 14,400.00

G. Total Civil + Electircal (A+B) 59762036.00

Executive Engineer 268

Building Division, Saharsa.