Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 2 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 3 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
Tender Value
Refer Docs
EMD Value
₹49,000
Closing Date
23 Sept 2026, 3:00 pmClosed
Nikhil Kumar
Chandrawal Water Works-I, Civil Lines, Delhi-110054
Providing of adhesive, thread locker and various industrial lubricants for day to day maintenance of various units under Chandrawal Water Works-II
2026_DJB_298463_7
NIT no. 8 (2026-27)
Open Tender
Miscellaneous Works
Item Rate
30 days
Chandrawal WW-II
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Delhi Jal Board
₹49,000
23 Sept 2026
16 Sept 2026
23 Sept 2026
16 Sept 2026
23 Sept 2026
16 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing Hight Strength Thread Locker (Anaerobic dimethacrylate ester) having atleast the following properties:
Breakaway torque (M10): ≥ 26 Nm, Temperature resistance: –55°C to +180°C, Fixture time: ≤ 10 min, works on active metal but also on passive substrates, Prevailing torque (M10): ≥ 32 Nm | 3 | Liter | 80 | ₹240 |
| 2 | Providing High Stength Bearing reatainer (Urethane methacrylate anaerobic adhesive) having atleast the following properties :
Gap filling capability: up to 0.25 mm, Shear strength (steel): ≥ 28 N/mm², Works on active & passive metals, Temperature resistance: –55°C to +180°C | 3 | Liter | 80 | ₹240 |
| 3 | Providing Low Viscosity Instant adhesive (Ethyl cyanoacrylate adhesive) having atleast following properties:
Viscosity: 12–22 cP, Very fast fixture: ≤ 5 sec on plastics & rubber, Lap shear strength (steel): ≥ 15.5 N/mm², Temperature resistance: –40°C to +120°C | 4 | Kg | 80 | ₹320 |
| 4 | Providing High Temperature RTV Silicone (Acetoxy silicone sealant) having atleast following properties:
High temperature resistance: up to 315°C, Shore A hardness: ≥ 18, Elongation at break: ≥ 300%, Tensile strength: ≥ 1.5 N/mm², Peel strength on metal: ≥ 1.73 N/mm | 5 | Kg | 80 | ₹400 |
| 5 | Providing of Graphite-based non-metallic anti-seize having atleast following properties :
Penetration: 310–360 (1/10 mm), Torque coefficient K: 0.13 (lubricated bolt), Temperature range: –29°C to +482°C, Good conductivity across threaded joints | 10 | Lb | 80 | ₹800 |
| 6 | Providing of Fast Set Steel Putty having atleast folllowing properties:
Gel time: 3.5–4 min, Tensile strength: ≥ 27 N/mm², Compressive strength: ≥ 51 N/mm², Shore D hardness: ≥ 80, Operating temperature: –30°C to +95°C | 6 | Kg | 80 | ₹480 |
| 7 | Providing of Penetrating oil having atleast following properties:
Specific gravity: 0.83, Must loosen rust-locked nuts/bolts, Displaces water & moisture, Removes rust, dirt, oxidation, Provides temporary corrosion protection | 15 | kg | 80 | ₹1,200 |
| 8 | Providing of Electrical contact cleaner having atleast the following properties :
Zero residue formulation, Removes moisture, dust, oils & oxides, Safe on metals & most plastics, Must restore electrical continuity | 15 | Liter | 80 | ₹1,200 |
| 9 | Providing of Superior metal Epoxy (Ferro-silicon filled heavy-duty epoxy) having atleast the following properties:
Tensile strength: ≥ 27 N/mm², Compressive strength: ≥ 134 N/mm², Shore Hardness : ≥ 86 N/mm², Abrasion reistance ASTM D4060 : not more than 127 mg, Temperature resistance: up to 120°C | 8 | Kg | 80 | ₹640 |
| 10 | Providing of Floor Repair Epoxy having atleast the following properties:
3-component, 100% solids epoxy mortar, Volume shrinkage: ≤ 0.66%, Compressive strength: ≥ 90 N/mm², Shore D hardness: ≥ 80, Temperature resistance: –30°C to +120°C, Self-leveling formulation | 600 | Kg | 80 | ₹48,000 |
stage.html
html • 0.02 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.64 MB
BOQ_398110.xls
BOQ • 12.82 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .