SPECIAL REPAIR REPLACEMENT OF FURNITURE FOR OFFICER, JCOS ORS MD ACCN AGAINST BER FURNITURE AT GMS UNDER GE I GOS

Amount

Bed Hard steel offrs (FD/E6/MAP/08R): All as shown on drg and specification Conduit pipe shall be 38mm sq 1.6mm thick for main frame and 19mm sq 1.6mm thick for inner frame for head and foot board 65mmx25mm 1.6mm thick for long rail. 25mm sq 1.6mm thick for stiffener under 12mm plywood shall be used Prelaminated particle board 18mm exterior grade for head and foot board with PVC edging 1mm thick. Finish : All steel surface shall be black powder coating Rest all as shown on drg complete all as specified and directed.

Charpoy Steel PBOR (FD/E6/MAP-II/01): Specification: Overall size shall be 1980mm long, 900mm wide and 440mm high. a) The frame of charpoy shall be made of MS hollow section piupe of 16 gauge as per specified sizes mentioned in Drg. b) Top of charpoy shall be of 12mm thick BWR ply of grade-A; Place and fix over the and fix over the stiffeners and cleat with 12 Nos of flat head bolt of 6mm dia, 50mm long nylon insert nut and round washer. c) Each leg of charpoy shall be provided with 32mmx32mmx5mm thick MS plate shall be welded at bottom of each leg. Rest all specification and dimensions are as per drg The charpoy shall be dry powder coated in black after preparation of surface complete all as specified and directed..

Chair Dinning PVC (MAP) (FD/E6/MAP/03): All woodwork shall be of 1st class teakwood of special Tectona Grandis conforming to IS-1331:1971 free from knots and cracks shall be used with moisture content permissible as per IS:287:1973. The seat shall be PVC 4mm thick visible like Godrej pattern with 4x10mm thick ribs moulded alongwith seat in single piece screwed with seat frame as shown in drawing. Nylon buffers of appropriate size to bew provided to all the four legs of the chair. All exposed wooden surface shall be smootherned before applying french polish till it attains glossy finish. All joints fixing shall be fixed with bamboo pins and nails shall not be used. Rest all as per drgs or complete all as specified and directed.

Sofa set 5 seater with cushion (FD/MAP-II/02): Overall size of three seater shall be 1730mm wide, 725mm deep and 530mm high up to arm level and one seater shall be 670mm wide and 725mm dee and 530mm high up to arm. All wood to be used shall be 1st class hard teak wood. Soda set five seater shall consist of one three seater and two single seats. 10xNos of foam cushion to each set each of size 530m,mx560mmx100mm thick of 40 density coverd with white lining cloth and best quality tapestry cloth of rate not less than 450 per mtr shall be provided with nylon zipper at one edge duly covered under the tapestry cloth flap. PVC hard rubber shoes of 25mm dia shall be provided to bottom of each leg with 20mm long screws.All wooden surface shall be polished with high gloss melamine polish in walnut shade after preparation of surface. Rest all specification and dimensions are as per drg complete all as specified and directed.

Table Dining 8 pers (FD/MAP-II/03): The overall size of the table shall be 2100x900x760mm. The table top shall be of 18mm thick pre-laminated particle board exterior grade confroming,exterior qulity as per IS:14587:1998. All woodwork shall be of 1st class teakwood of specie tectona grandies conforming to IS-1331:1971 free from dead knots and moisture content as permissible as per IS-287. 6mm thick TW lipping shall be provided on all the exposed of MDF Duly treated with french polish as specified. Powder coated MS angular plates each of 150mmx30mmx5mm thick shall be screwed to the legs as right angles with long rails and short rails. Hard nylon shoes/buffers shall be provided to each leg bottom complete all as specified and directed.

Shoes Rack Steel (FD/E6/MAP/02): Overall size shall be 700mm long, 300mm wide and 880mm hig. The legs of the shoe rack shall be of 25mm dia MS pipe of 18 gauge. The five shelves of the rack shall be of 20mm dia MS pipe of 18 gauge welded to legs . The shelves shall have 3mm dia Ms rod 9 Nos in widthwise and 3 Nos in lengthwise welded to 20mm dia shelf frame. All steel surface shall be black powder coating Rest all as shown on drg complete all as specified and directed.

Ladder Aluminium (FD-1025): Dimension : Overall size shall be 2310 mm long, 363.5mm wide. Description : a) The ladder shall be of aluminum stringer having size 60mm x 31.75mm and wall thickness 3.18mm . b) Each rung shall be of 23mm dia aluminum pipe with wall thickness not less than 2.43mm and shall be eight in nos placed at equidistant spaces of 300mm in between as shown in drg . c) Each aluminum pipe rung of 23mm dia shall be fitted inside the stringer with end bend to shape and each rung on both sides shall be provided with hard rubber cap . d) Hard rubber caps/shoes shall be fixed at the ends of aluminum rungs and stringers as shown on drawing with screws . Rest all specifications and dimensions are as per drg all as shown on drawing complete all as specified and directed.

Chair Dinning with cushion (FD/E6/MAP/10R): Dimension : Overall size shall be 450mm wide x 450mm deep and 950mm height , 450mm high up to seat . Description : a) All wood to be used shall be 1st class hard teak wood . b) The seat of chair shall be made of 40 density foam cushion having thickness 75mm. the cushion shall be placed and pasted on 12mm BWR plywood as per size of seat duly covered with approved tapestry cloth of rate not less than 450 per mtr. The seat shall be fixed over the rail and screwed from wood stopper with 30mm long screws. c) PVC hard rubber ring of dai 25mm shall be provided to bottom of each leg with 20mm long screws. Rest all specifications and dimensions are as per drg Finish : The chair shall be polished in high gloss melamine polish in walnut shade after preparation of surface complete all as specified and directed.

Table bed side MAP (FD/E6/MAP/15R): All as per drg and specification tlimber 1st class hard wood teak Plywood 12mm for side back and drawer and 6mm plywood for bottom of drawer and back side. Legs shall be 18Sqmm condult pipe 1.6mm thick black powder coated paint 18/19mm pre laminated particle board of exterior grade IS-12823 beaded with PVC beading. All exposed partion shall be polished with french polish in high gloss finish. Rest all as per drg complete all as specified and directed.

Chair Revolving with H/B cushion, Godrej Modle PCH-7022 (TP): As per Trad patteren

Capital Construction Company

DEBASHIS AGENCY

M/s Bapujee Builders and Traders

ABC CONSTRUCTION COMPANY